OSDN Git Service

[DAGCombiner] Set the right SDLoc on extended SETCC uses (7/N)
authorVedant Kumar <vsk@apple.com>
Fri, 11 May 2018 18:40:10 +0000 (18:40 +0000)
committerVedant Kumar <vsk@apple.com>
Fri, 11 May 2018 18:40:10 +0000 (18:40 +0000)
ExtendSetCCUses updates SETCC nodes which use a load (OriginalLoad) to
reflect a simplification to the load (ExtLoad).

Based on my reading, ExtendSetCCUses may create new nodes to extend a
constant attached to a SETCC. It also creates fresh SETCC nodes which
refer to any updated operands.

ISTM that the location applied to the new constant and SETCC nodes
should be the same as the location of the ExtLoad.

This was suggested by Adrian in https://reviews.llvm.org/D45995.

Part of: llvm.org/PR37262

Differential Revision: https://reviews.llvm.org/D46216

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332119 91177308-0d34-0410-b5e6-96231b3b80d8

lib/CodeGen/SelectionDAG/DAGCombiner.cpp
test/CodeGen/X86/extend-set-cc-uses-dbg.ll [new file with mode: 0644]
test/CodeGen/X86/pr32284.ll

index 2a5ebcc..d03c6ff 100644 (file)
@@ -591,7 +591,6 @@ namespace {
 
     void ExtendSetCCUses(const SmallVectorImpl<SDNode *> &SetCCs,
                          SDValue OrigLoad, SDValue ExtLoad,
-                         const SDLoc &DL,
                          ISD::NodeType ExtType);
   };
 
@@ -7496,10 +7495,10 @@ static bool ExtendUsesToFormExtLoad(EVT VT, SDNode *N, SDValue N0,
 
 void DAGCombiner::ExtendSetCCUses(const SmallVectorImpl<SDNode *> &SetCCs,
                                   SDValue OrigLoad, SDValue ExtLoad,
-                                  const SDLoc &DL, ISD::NodeType ExtType) {
+                                  ISD::NodeType ExtType) {
   // Extend SetCC uses if necessary.
-  for (unsigned i = 0, e = SetCCs.size(); i != e; ++i) {
-    SDNode *SetCC = SetCCs[i];
+  SDLoc DL(ExtLoad);
+  for (SDNode *SetCC : SetCCs) {
     SmallVector<SDValue, 4> Ops;
 
     for (unsigned j = 0; j != 2; ++j) {
@@ -7607,8 +7606,7 @@ SDValue DAGCombiner::CombineExtLoad(SDNode *N) {
   // with a truncate of the concatenated sextloaded vectors.
   SDValue Trunc =
       DAG.getNode(ISD::TRUNCATE, SDLoc(N0), N0.getValueType(), NewValue);
-  ExtendSetCCUses(SetCCs, N0, NewValue, DL,
-                  (ISD::NodeType)N->getOpcode());
+  ExtendSetCCUses(SetCCs, N0, NewValue, (ISD::NodeType)N->getOpcode());
   CombineTo(N0.getNode(), Trunc, NewChain);
   return SDValue(N, 0); // Return N so it doesn't get rechecked!
 }
@@ -7672,8 +7670,7 @@ SDValue DAGCombiner::CombineZExtLogicopShiftLoad(SDNode *N) {
   SDValue And = DAG.getNode(N0.getOpcode(), DL0, VT, Shift,
                             DAG.getConstant(Mask, DL0, VT));
 
-  ExtendSetCCUses(SetCCs, N1.getOperand(0), ExtLoad, SDLoc(Load),
-                  ISD::ZERO_EXTEND);
+  ExtendSetCCUses(SetCCs, N1.getOperand(0), ExtLoad, ISD::ZERO_EXTEND);
   CombineTo(N, And);
   if (SDValue(Load, 0).hasOneUse()) {
     DAG.ReplaceAllUsesOfValueWith(SDValue(Load, 1), ExtLoad.getValue(1));
@@ -7763,7 +7760,7 @@ static SDValue tryToFoldExtOfExtload(SelectionDAG &DAG, DAGCombiner &Combiner,
 static SDValue tryToFoldExtOfLoad(SelectionDAG &DAG, DAGCombiner &Combiner,
                                   const TargetLowering &TLI, EVT VT,
                                   bool LegalOperations, SDNode *N, SDValue N0,
-                                  SDLoc DL, ISD::LoadExtType ExtLoadType,
+                                  ISD::LoadExtType ExtLoadType,
                                   ISD::NodeType ExtOpc) {
   if (!ISD::isNON_EXTLoad(N0.getNode()) ||
       !ISD::isUNINDEXEDLoad(N0.getNode()) ||
@@ -7785,7 +7782,7 @@ static SDValue tryToFoldExtOfLoad(SelectionDAG &DAG, DAGCombiner &Combiner,
   SDValue ExtLoad = DAG.getExtLoad(ExtLoadType, SDLoc(LN0), VT, LN0->getChain(),
                                    LN0->getBasePtr(), N0.getValueType(),
                                    LN0->getMemOperand());
-  Combiner.ExtendSetCCUses(SetCCs, N0, ExtLoad, DL, ExtOpc);
+  Combiner.ExtendSetCCUses(SetCCs, N0, ExtLoad, ExtOpc);
   // If the load value is used only by N, replace it via CombineTo N.
   bool NoReplaceTrunc = SDValue(LN0, 0).hasOneUse();
   Combiner.CombineTo(N, ExtLoad);
@@ -7863,9 +7860,9 @@ SDValue DAGCombiner::visitSIGN_EXTEND(SDNode *N) {
     }
   }
 
-  // Try to fold (sext (load x)) to a smaller sextload.
+  // Try to simplify (sext (load x)).
   if (SDValue foldedExt =
-          tryToFoldExtOfLoad(DAG, *this, TLI, VT, LegalOperations, N, N0, DL,
+          tryToFoldExtOfLoad(DAG, *this, TLI, VT, LegalOperations, N, N0,
                              ISD::SEXTLOAD, ISD::SIGN_EXTEND))
     return foldedExt;
 
@@ -7902,8 +7899,7 @@ SDValue DAGCombiner::visitSIGN_EXTEND(SDNode *N) {
         Mask = Mask.sext(VT.getSizeInBits());
         SDValue And = DAG.getNode(N0.getOpcode(), DL, VT,
                                   ExtLoad, DAG.getConstant(Mask, DL, VT));
-        ExtendSetCCUses(SetCCs, N0.getOperand(0), ExtLoad, DL,
-                        ISD::SIGN_EXTEND);
+        ExtendSetCCUses(SetCCs, N0.getOperand(0), ExtLoad, ISD::SIGN_EXTEND);
         bool NoReplaceTruncAnd = !N0.hasOneUse();
         bool NoReplaceTrunc = SDValue(LN00, 0).hasOneUse();
         CombineTo(N, And);
@@ -8134,7 +8130,7 @@ SDValue DAGCombiner::visitZERO_EXTEND(SDNode *N) {
   // Try to simplify (zext (load x)).
   if (SDValue foldedExt =
           tryToFoldExtOfLoad(DAG, *this, TLI, VT, LegalOperations, N, N0,
-                             SDLoc(N), ISD::ZEXTLOAD, ISD::ZERO_EXTEND))
+                             ISD::ZEXTLOAD, ISD::ZERO_EXTEND))
     return foldedExt;
 
   // fold (zext (load x)) to multiple smaller zextloads.
@@ -8179,8 +8175,7 @@ SDValue DAGCombiner::visitZERO_EXTEND(SDNode *N) {
         SDLoc DL(N);
         SDValue And = DAG.getNode(N0.getOpcode(), DL, VT,
                                   ExtLoad, DAG.getConstant(Mask, DL, VT));
-        ExtendSetCCUses(SetCCs, N0.getOperand(0), ExtLoad, DL,
-                        ISD::ZERO_EXTEND);
+        ExtendSetCCUses(SetCCs, N0.getOperand(0), ExtLoad, ISD::ZERO_EXTEND);
         bool NoReplaceTruncAnd = !N0.hasOneUse();
         bool NoReplaceTrunc = SDValue(LN00, 0).hasOneUse();
         CombineTo(N, And);
@@ -8356,8 +8351,7 @@ SDValue DAGCombiner::visitANY_EXTEND(SDNode *N) {
                                        LN0->getChain(),
                                        LN0->getBasePtr(), N0.getValueType(),
                                        LN0->getMemOperand());
-      ExtendSetCCUses(SetCCs, N0, ExtLoad, SDLoc(N),
-                      ISD::ANY_EXTEND);
+      ExtendSetCCUses(SetCCs, N0, ExtLoad, ISD::ANY_EXTEND);
       // If the load value is used only by N, replace it via CombineTo N.
       bool NoReplaceTrunc = N0.hasOneUse();
       CombineTo(N, ExtLoad);
diff --git a/test/CodeGen/X86/extend-set-cc-uses-dbg.ll b/test/CodeGen/X86/extend-set-cc-uses-dbg.ll
new file mode 100644 (file)
index 0000000..149ef7f
--- /dev/null
@@ -0,0 +1,48 @@
+; RUN: llc < %s -O0 -stop-after=livedebugvalues -o - | FileCheck %s
+
+target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
+target triple = "x86_64-apple-macosx10.13.0"
+
+define void @foo(i32* %p) !dbg !4 {
+bb:
+  %tmp = load i32, i32* %p, align 4, !dbg !7
+  ; CHECK: $eax = MOV32rm killed {{.*}} $rdi, {{.*}} debug-location !7 :: (load 4 from %ir.p)
+  ; CHECK-NEXT: $edi = MOV32rr killed $eax, implicit-def $rdi, debug-location !7
+  ; CHECK-NEXT: $rcx = MOV64rr $rdi, debug-location !7
+
+  switch i32 %tmp, label %bb7 [
+    i32 0, label %bb1
+    i32 1, label %bb2
+    i32 2, label %bb3
+    i32 3, label %bb4
+  ], !dbg !8
+
+bb1:                                              ; preds = %bb
+  unreachable
+
+bb2:                                              ; preds = %bb
+  unreachable
+
+bb3:                                              ; preds = %bb
+  unreachable
+
+bb4:                                              ; preds = %bb
+  unreachable
+
+bb7:                                              ; preds = %bb
+  ret void, !dbg !9
+}
+
+!llvm.dbg.cu = !{!0}
+!llvm.module.flags = !{!2, !3}
+
+!0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, file: !1, producer: "clang version 7.0.0 (trunk 330770) (llvm/trunk 330769)", isOptimized: true, runtimeVersion: 0, emissionKind: LineTablesOnly)
+!1 = !DIFile(filename: "/Users/vsk/src/llvm.org-master/llvm/lib/Demangle/ItaniumDemangle.cpp", directory: "/Users/vsk/src/builds/llvm.org-master-RA-stage2")
+!2 = !{i32 2, !"Debug Info Version", i32 3}
+!3 = !{i32 7, !"PIC Level", i32 2}
+!4 = distinct !DISubprogram(name: "printLeft", scope: !1, file: !1, line: 1306, type: !5, isLocal: true, isDefinition: true, scopeLine: 1306, flags: DIFlagPrototyped, isOptimized: true, unit: !0)
+!5 = !DISubroutineType(types: !6)
+!6 = !{}
+!7 = !DILocation(line: 1307, column: 13, scope: !4)
+!8 = !DILocation(line: 1307, column: 5, scope: !4)
+!9 = !DILocation(line: 1327, column: 3, scope: !4)
index 24caa26..5d5a315 100644 (file)
@@ -38,11 +38,11 @@ define void @foo() {
 ; X64-LABEL: foo:
 ; X64:       # %bb.0: # %entry
 ; X64-NEXT:    movzbl {{.*}}(%rip), %eax
-; X64-NEXT:    testb %al, %al
-; X64-NEXT:    setne -{{[0-9]+}}(%rsp)
 ; X64-NEXT:    xorl %ecx, %ecx
 ; X64-NEXT:    testl %eax, %eax
 ; X64-NEXT:    setne %cl
+; X64-NEXT:    testb %al, %al
+; X64-NEXT:    setne -{{[0-9]+}}(%rsp)
 ; X64-NEXT:    xorl %edx, %edx
 ; X64-NEXT:    cmpl %eax, %ecx
 ; X64-NEXT:    setle %dl
@@ -160,12 +160,12 @@ define void @f1() {
 ; X64-LABEL: f1:
 ; X64:       # %bb.0: # %entry
 ; X64-NEXT:    movslq {{.*}}(%rip), %rax
+; X64-NEXT:    movabsq $-8381627093, %rcx # imm = 0xFFFFFFFE0C6A852B
+; X64-NEXT:    cmpq %rcx, %rax
+; X64-NEXT:    setne -{{[0-9]+}}(%rsp)
 ; X64-NEXT:    xorl %ecx, %ecx
 ; X64-NEXT:    cmpq $-1, %rax
 ; X64-NEXT:    sete %cl
-; X64-NEXT:    movabsq $-8381627093, %rdx # imm = 0xFFFFFFFE0C6A852B
-; X64-NEXT:    cmpq %rdx, %rax
-; X64-NEXT:    setne -{{[0-9]+}}(%rsp)
 ; X64-NEXT:    xorl %edx, %edx
 ; X64-NEXT:    cmpl $-1, %eax
 ; X64-NEXT:    sete %dl
@@ -250,19 +250,19 @@ define void @f1() {
 ; 686-NEXT:    .cfi_offset %esi, -12
 ; 686-NEXT:    .cfi_offset %edi, -8
 ; 686-NEXT:    movl var_5, %edx
+; 686-NEXT:    movl %edx, %eax
+; 686-NEXT:    xorl $208307499, %eax # imm = 0xC6A852B
 ; 686-NEXT:    movl %edx, %esi
 ; 686-NEXT:    sarl $31, %esi
+; 686-NEXT:    movl %esi, %ecx
+; 686-NEXT:    xorl $-2, %ecx
+; 686-NEXT:    orl %eax, %ecx
+; 686-NEXT:    setne (%esp)
 ; 686-NEXT:    movl %edx, %ecx
 ; 686-NEXT:    andl %esi, %ecx
 ; 686-NEXT:    xorl %eax, %eax
 ; 686-NEXT:    cmpl $-1, %ecx
 ; 686-NEXT:    sete %al
-; 686-NEXT:    movl %edx, %ecx
-; 686-NEXT:    xorl $208307499, %ecx # imm = 0xC6A852B
-; 686-NEXT:    movl %esi, %edi
-; 686-NEXT:    xorl $-2, %edi
-; 686-NEXT:    orl %ecx, %edi
-; 686-NEXT:    setne (%esp)
 ; 686-NEXT:    xorl %ecx, %ecx
 ; 686-NEXT:    cmpl $-1, %edx
 ; 686-NEXT:    sete %cl