[ARM] 3529/1: s3c24xx: fix restoring control register with undefined instruction

Patch from Dimitry Andric

In arch/arm/mach-s3c2410/sleep.S, the coprocessor registers are saved at
suspend time, and restored at resume time. However, an undefined
instruction is used when attempting to restore a non-existent "auxiliary
control register".  This leads to a crash on S3C2412, which has an ARM926
core instead of an ARM920.

At suspend time, the following fragment runs:

	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
	mrc	p15, 0, r9, c1, c0, 0	@ control register

and at resume time, the following fragment runs:

	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control
	...
	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc

There are several problems with these fragments:
1. The ARM920 and ARM926 cores don't have any "auxiliary control
   register", at least not according to the ARM920 and ARM926 TRM's.
2. The 2nd line of suspend erroneously saves the c2 register again.
3. This saved c2 value is restored using an undefined instruction.  For
   some reason this does not crash on ARM920, but does crash on ARM926.

The following patch fixes all these problems.

Signed-off-by: Dimitry Andric <dimitry@andric.com>
Yes, this looks sensible

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 832fb86..73de2ea 100644 (file)
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
        mrc     p15, 0, r5, c13, c0, 0  @ PID
        mrc     p15, 0, r6, c3, c0, 0   @ Domain ID
        mrc     p15, 0, r7, c2, c0, 0   @ translation table base address
-       mrc     p15, 0, r8, c2, c0, 0   @ auxiliary control register
-       mrc     p15, 0, r9, c1, c0, 0   @ control register
+       mrc     p15, 0, r8, c1, c0, 0   @ control register
 
        stmia   r0, { r4 - r13 }
 
@@ -165,7 +164,6 @@ ENTRY(s3c2410_cpu_resume)
        mcr     p15, 0, r5, c13, c0, 0          @ PID
        mcr     p15, 0, r6, c3, c0, 0           @ Domain ID
        mcr     p15, 0, r7, c2, c0, 0           @ translation table base
-       mcr     p15, 0, r8, c1, c1, 0           @ auxilliary control
 
 #ifdef CONFIG_DEBUG_RESUME
        mov     r3, #'R'
@@ -173,7 +171,7 @@ ENTRY(s3c2410_cpu_resume)
 #endif
 
        ldr     r2, =resume_with_mmu
-       mcr     p15, 0, r9, c1, c0, 0           @ turn on MMU, etc
+       mcr     p15, 0, r8, c1, c0, 0           @ turn on MMU, etc
        nop                                     @ second-to-last before mmu
        mov     pc, r2                          @ go back to virtual address