examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
i2c2 {
#address-cells = <1>;
remote-endpoint = <&csi2a_ep>;
link-frequencies = /bits/ 64 <199200000 210000000
499200000>;
- bus-type = <4>;
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
};
};
};
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
i2c0 {
#address-cells = <1>;
port {
ov772x_0: endpoint {
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
vsync-active = <0>;
hsync-active = <0>;
pclk-sample = <0>;
examples:
- |
#include <dt-bindings/clock/marvell,mmp2.h>
+ #include <dt-bindings/media/video-interfaces.h>
#include <dt-bindings/power/marvell,mmp2.h>
camera@d420a000 {
port {
camera0_0: endpoint {
remote-endpoint = <&ov7670_0>;
- bus-type = <5>; /* Parallel */
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
hsync-active = <1>; /* Active high */
vsync-active = <1>; /* Active high */
pclk-sample = <0>; /* Falling */
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/media/video-interfaces.h>
xisc: xisc@e1408000 {
compatible = "microchip,sama7g5-isc";
port {
xisc_in: endpoint {
- bus-type = <5>; /* Parallel */
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
remote-endpoint = <&csi2dc_out>;
hsync-active = <1>;
vsync-active = <1>;
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/media/video-interfaces.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
+
dcmi: dcmi@4c006000 {
compatible = "st,stm32-dcmi";
reg = <0x4c006000 0x400>;
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;