dt-bindings: net: add DT bindings for Socionext UniPhier AVE

DT bindings for the AVE ethernet controller found on Socionext's
UniPhier platforms.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
new file mode 100644 (file)
index 0000000..270ea4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
@@ -0,0 +1,48 @@
+* Socionext AVE ethernet controller
+
+This describes the devicetree bindings for AVE ethernet controller
+implemented on Socionext UniPhier SoCs.
+
+Required properties:
+ - compatible: Should be
+       - "socionext,uniphier-pro4-ave4" : for Pro4 SoC
+       - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC
+       - "socionext,uniphier-ld11-ave4" : for LD11 SoC
+       - "socionext,uniphier-ld20-ave4" : for LD20 SoC
+ - reg: Address where registers are mapped and size of region.
+ - interrupts: Should contain the MAC interrupt.
+ - phy-mode: See ethernet.txt in the same directory. Allow to choose
+       "rgmii", "rmii", or "mii" according to the PHY.
+ - phy-handle: Should point to the external phy device.
+       See ethernet.txt file in the same directory.
+ - clocks: A phandle to the clock for the MAC.
+
+Optional properties:
+ - resets: A phandle to the reset control for the MAC.
+ - local-mac-address: See ethernet.txt in the same directory.
+
+Required subnode:
+ - mdio: A container for child nodes representing phy nodes.
+         See phy.txt in the same directory.
+
+Example:
+
+       ether: ethernet@65000000 {
+               compatible = "socionext,uniphier-ld20-ave4";
+               reg = <0x65000000 0x8500>;
+               interrupts = <0 66 4>;
+               phy-mode = "rgmii";
+               phy-handle = <&ethphy>;
+               clocks = <&sys_clk 6>;
+               resets = <&sys_rst 6>;
+               local-mac-address = [00 00 00 00 00 00];
+
+               mdio {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       ethphy: ethphy@1 {
+                               reg = <1>;
+                       };
+               };
+       };