The SD host controller specification defines 3 types software reset:
software reset for data line, software reset for command line and software
reset for all. Software reset for all means this reset affects the entire
Host controller except for the card detection circuit.
In sdhci_runtime_resume_host() we always do a software "reset for all",
which causes the Spreadtrum variant controller to work abnormally after
resuming. To fix the problem, let's do a software reset for the data and
the command part, rather than "for all".
However, as sdhci_runtime_resume() is a common sdhci function and we don't
want to change the behaviour for other variants, let's introduce a new
in-parameter for it. This enables the caller to decide if a "reset for all"
shall be done or not.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Fixes:
fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci_acpi_byt_setting(&c->pdev->dev);
- return sdhci_runtime_resume_host(c->host);
+ return sdhci_runtime_resume_host(c->host, 0);
}
#endif
esdhc_pltfm_set_clock(host, imx_data->actual_clock);
}
- err = sdhci_runtime_resume_host(host);
+ err = sdhci_runtime_resume_host(host, 0);
if (err)
goto disable_ipg_clk;
}
out:
- return sdhci_runtime_resume_host(host);
+ return sdhci_runtime_resume_host(host, 0);
}
#endif /* CONFIG_PM */
err_pci_runtime_suspend:
while (--i >= 0)
- sdhci_runtime_resume_host(chip->slots[i]->host);
+ sdhci_runtime_resume_host(chip->slots[i]->host, 0);
return ret;
}
if (!slot)
continue;
- ret = sdhci_runtime_resume_host(slot->host);
+ ret = sdhci_runtime_resume_host(slot->host, 0);
if (ret)
return ret;
}
if (!IS_ERR(pxa->clk_core))
clk_prepare_enable(pxa->clk_core);
- return sdhci_runtime_resume_host(host);
+ return sdhci_runtime_resume_host(host, 0);
}
#endif
clk_prepare_enable(busclk);
if (ourhost->cur_clk >= 0)
clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
- ret = sdhci_runtime_resume_host(host);
+ ret = sdhci_runtime_resume_host(host, 0);
return ret;
}
#endif
if (ret)
goto clk_disable;
- sdhci_runtime_resume_host(host);
+ sdhci_runtime_resume_host(host, 1);
return 0;
clk_disable:
priv->restore_needed = false;
}
- ret = sdhci_runtime_resume_host(host);
+ ret = sdhci_runtime_resume_host(host, 0);
if (ret)
goto out;
return 0;
}
EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
-int sdhci_runtime_resume_host(struct sdhci_host *host)
+int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset)
{
struct mmc_host *mmc = host->mmc;
unsigned long flags;
host->ops->enable_dma(host);
}
- sdhci_init(host, 0);
+ sdhci_init(host, soft_reset);
if (mmc->ios.power_mode != MMC_POWER_UNDEFINED &&
mmc->ios.power_mode != MMC_POWER_OFF) {
int sdhci_suspend_host(struct sdhci_host *host);
int sdhci_resume_host(struct sdhci_host *host);
int sdhci_runtime_suspend_host(struct sdhci_host *host);
-int sdhci_runtime_resume_host(struct sdhci_host *host);
+int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset);
#endif
void sdhci_cqe_enable(struct mmc_host *mmc);