Blackfin arch: Dont use cs_change_per_word, since the AD7877 driver doesnt require...

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index c6614e5..003e2ac 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,7 +451,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) \
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
         && defined(CONFIG_SND_SOC_WM8731_SPI)
 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
        .enable_dma = 0,
@@ -564,7 +564,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &spi_ad7877_chip_info,
        },
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) \
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
         && defined(CONFIG_SND_SOC_WM8731_SPI)
        {
                .modalias       = "wm8731",

diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 0a1bdeb..09f4bfb 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -503,7 +503,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .platform_data          = &bfin_ad7877_ts_info,
                .irq                    = IRQ_PF6,
                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num        = 1,
+               .bus_num        = 0,
                .chip_select  = 1,
                .controller_data = &spi_ad7877_chip_info,
        },

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 5826c62..fd5f4a6 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -296,7 +296,7 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-       .cs_change_per_word = 1,
+       .cs_change_per_word = 0,
        .enable_dma = 0,
        .bits_per_word = 16,
 };
@@ -388,7 +388,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        .platform_data          = &bfin_ad7877_ts_info,
        .irq                    = IRQ_PF2,
        .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
-       .bus_num                = 1,
+       .bus_num                = 0,
        .chip_select            = 5,
        .controller_data = &spi_ad7877_chip_info,
 },

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index a2249dc..c5ff190 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -503,7 +503,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .platform_data          = &bfin_ad7877_ts_info,
                .irq                    = IRQ_PF6,
                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num        = 1,
+               .bus_num        = 0,
                .chip_select  = 1,
                .controller_data = &spi_ad7877_chip_info,
        },

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 2d30906..bbd2a04 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -378,7 +378,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-       .cs_change_per_word = 1,
+       .cs_change_per_word = 0,
        .enable_dma = 0,
        .bits_per_word = 16,
 };