ath10k: average ack rssi support for data frames

Average ack rssi value is weighted average of ack rssi for
no of msdu's has been sent.
This feature is enabled by the host driver if firmware is capable.
After receiving event from host, firmware allocates the necessary
memory to store the ack_rssi for data packets during the init time.

After each successful transmission, If tx completion status is OK
and 24th bit is set in HTT message header then host will fetch the
ack_rssi else host can ignore the ack_rssi field.

Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 35899d7..fd668e3 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2549,6 +2549,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
                             ar->wmi.svc_map))
                        val |= WMI_10_4_TDLS_UAPSD_BUFFER_STA;
 
+               if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI,
+                            ar->wmi.svc_map))
+                       val |= WMI_10_4_TX_DATA_ACK_RSSI;
+
                status = ath10k_mac_ext_resource_config(ar, val);
                if (status) {
                        ath10k_err(ar,

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 5d3ff80..26ce532 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -577,6 +577,8 @@ struct htt_mgmt_tx_completion {
 #define HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES_MASK     0xFF000000
 #define HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES_LSB      24
 
+#define HTT_TX_CMPL_FLAG_DATA_RSSI BIT(0)
+
 struct htt_rx_indication_hdr {
        u8 info0; /* %HTT_RX_INDICATION_INFO0_ */
        __le16 peer_id;
@@ -840,7 +842,7 @@ struct htt_data_tx_completion {
                } __packed;
        } __packed;
        u8 num_msdus;
-       u8 rsvd0;
+       u8 flags2; /* HTT_TX_CMPL_FLAG_DATA_RSSI */
        __le16 msdus[0]; /* variable length based on %num_msdus */
 } __packed;
 

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 4b9197b..daccf30 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1884,7 +1884,9 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
        struct htt_resp *resp = (struct htt_resp *)skb->data;
        struct htt_tx_done tx_done = {};
        int status = MS(resp->data_tx_completion.flags, HTT_DATA_TX_STATUS);
-       __le16 msdu_id;
+       __le16 msdu_id, *msdus;
+       bool rssi_enabled = false;
+       u8 msdu_count = 0;
        int i;
 
        switch (status) {
@@ -1908,10 +1910,30 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
        ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx completion num_msdus %d\n",
                   resp->data_tx_completion.num_msdus);
 
-       for (i = 0; i < resp->data_tx_completion.num_msdus; i++) {
-               msdu_id = resp->data_tx_completion.msdus[i];
+       msdu_count = resp->data_tx_completion.num_msdus;
+
+       if (resp->data_tx_completion.flags2 & HTT_TX_CMPL_FLAG_DATA_RSSI)
+               rssi_enabled = true;
+
+       for (i = 0; i < msdu_count; i++) {
+               msdus = resp->data_tx_completion.msdus;
+               msdu_id = msdus[i];
                tx_done.msdu_id = __le16_to_cpu(msdu_id);
 
+               if (rssi_enabled) {
+                       /* Total no of MSDUs should be even,
+                        * if odd MSDUs are sent firmware fills
+                        * last msdu id with 0xffff
+                        */
+                       if (msdu_count & 0x01) {
+                               msdu_id = msdus[msdu_count +  i + 1];
+                               tx_done.ack_rssi = __le16_to_cpu(msdu_id);
+                       } else {
+                               msdu_id = msdus[msdu_count +  i];
+                               tx_done.ack_rssi = __le16_to_cpu(msdu_id);
+                       }
+               }
+
                /* kfifo_put: In practice firmware shouldn't fire off per-CE
                 * interrupt and main interrupt (MSI/-X range case) for the same
                 * HTC service so it should be safe to use kfifo_put w/o lock.

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ef952a2..97548f9 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8479,6 +8479,10 @@ int ath10k_mac_register(struct ath10k *ar)
        wiphy_ext_feature_set(ar->hw->wiphy,
                              NL80211_EXT_FEATURE_SET_SCAN_DWELL);
 
+       if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map))
+               wiphy_ext_feature_set(ar->hw->wiphy,
+                                     NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT);
+
        /*
         * on LL hardware queues are managed entirely by the FW
         * so we only advertise to mac we can do the queues thing

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index a25bf9b..1562294 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -203,6 +203,7 @@ enum wmi_service {
        WMI_SERVICE_TPC_STATS_FINAL,
        WMI_SERVICE_RESET_CHIP,
        WMI_SERVICE_SPOOF_MAC_SUPPORT,
+       WMI_SERVICE_TX_DATA_ACK_RSSI,
 
        /* keep last */
        WMI_SERVICE_MAX,
@@ -350,6 +351,8 @@ enum wmi_10_4_service {
        WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
        WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
        WMI_10_4_SERVICE_TPC_STATS_FINAL,
+       WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
+       WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 };
 
 static inline char *wmi_service_name(int service_id)
@@ -463,6 +466,7 @@ static inline char *wmi_service_name(int service_id)
        SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
        SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
        SVCSTR(WMI_SERVICE_RESET_CHIP);
+       SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
        default:
                return NULL;
        }
@@ -771,6 +775,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
               WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
        SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
               WMI_SERVICE_TPC_STATS_FINAL, len);
+       SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
+              WMI_SERVICE_TX_DATA_ACK_RSSI, len);
 }
 
 #undef SVCMAP
@@ -2924,6 +2930,7 @@ enum wmi_coex_version {
  * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
  *     enable/disable
  * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
+ * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
  */
 enum wmi_10_4_feature_mask {
        WMI_10_4_LTEU_SUPPORT                   = BIT(0),
@@ -2939,6 +2946,7 @@ enum wmi_10_4_feature_mask {
        WMI_10_4_TDLS_UAPSD_SLEEP_STA           = BIT(10),
        WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
        WMI_10_4_TDLS_EXPLICIT_MODE_ONLY        = BIT(12),
+       WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
 
 };