[llvm-mca][x86] Add MOVBE resource tests to all supporting targets

SNB doesn't support MOVBE but the numbers in Generic (which use the SNB model) look sane.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337305 91177308-0d34-0410-b5e6-96231b3b80d8

diff --git a/test/tools/llvm-mca/X86/Atom/resources-movbe.s b/test/tools/llvm-mca/X86/Atom/resources-movbe.s
new file mode 100644 (file)
index 0000000..f1271df
--- /dev/null
+++ b/test/tools/llvm-mca/X86/Atom/resources-movbe.s
@@ -0,0 +1,44 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=atom -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  1      1     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  1      1     1.00    *                   movbew (%rax), %cx
+# CHECK-NEXT:  1      1     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  1      1     1.00    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  1      1     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  1      1     1.00    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - AtomPort0
+# CHECK-NEXT: [1]   - AtomPort1
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]
+# CHECK-NEXT: 6.00    -
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    Instructions:
+# CHECK-NEXT: 1.00    -     movbew     %cx, (%rax)
+# CHECK-NEXT: 1.00    -     movbew     (%rax), %cx
+# CHECK-NEXT: 1.00    -     movbel     %ecx, (%rax)
+# CHECK-NEXT: 1.00    -     movbel     (%rax), %ecx
+# CHECK-NEXT: 1.00    -     movbeq     %rcx, (%rax)
+# CHECK-NEXT: 1.00    -     movbeq     (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/Broadwell/resources-movbe.s b/test/tools/llvm-mca/X86/Broadwell/resources-movbe.s
new file mode 100644 (file)
index 0000000..7c4003f
--- /dev/null
+++ b/test/tools/llvm-mca/X86/Broadwell/resources-movbe.s
@@ -0,0 +1,52 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=broadwell -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  3      2     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbew (%rax), %cx
+# CHECK-NEXT:  3      2     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  3      2     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - BWDivider
+# CHECK-NEXT: [1]   - BWFPDivider
+# CHECK-NEXT: [2]   - BWPort0
+# CHECK-NEXT: [3]   - BWPort1
+# CHECK-NEXT: [4]   - BWPort2
+# CHECK-NEXT: [5]   - BWPort3
+# CHECK-NEXT: [6]   - BWPort4
+# CHECK-NEXT: [7]   - BWPort5
+# CHECK-NEXT: [8]   - BWPort6
+# CHECK-NEXT: [9]   - BWPort7
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]
+# CHECK-NEXT:  -      -      -     3.00   2.50   2.50   3.00   3.00    -     1.00
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    Instructions:
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbew     %cx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbew     (%rax), %cx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbel     %ecx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbel     (%rax), %ecx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbeq     %rcx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbeq     (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/BtVer2/resources-movbe.s b/test/tools/llvm-mca/X86/BtVer2/resources-movbe.s
new file mode 100644 (file)
index 0000000..e6b4a96
--- /dev/null
+++ b/test/tools/llvm-mca/X86/BtVer2/resources-movbe.s
@@ -0,0 +1,56 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=btver2 -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  1      1     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  1      4     1.00    *                   movbew (%rax), %cx
+# CHECK-NEXT:  1      1     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  1      4     1.00    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  1      1     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  1      4     1.00    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - JALU0
+# CHECK-NEXT: [1]   - JALU1
+# CHECK-NEXT: [2]   - JDiv
+# CHECK-NEXT: [3]   - JFPA
+# CHECK-NEXT: [4]   - JFPM
+# CHECK-NEXT: [5]   - JFPU0
+# CHECK-NEXT: [6]   - JFPU1
+# CHECK-NEXT: [7]   - JLAGU
+# CHECK-NEXT: [8]   - JMul
+# CHECK-NEXT: [9]   - JSAGU
+# CHECK-NEXT: [10]  - JSTC
+# CHECK-NEXT: [11]  - JVALU0
+# CHECK-NEXT: [12]  - JVALU1
+# CHECK-NEXT: [13]  - JVIMUL
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]
+# CHECK-NEXT: 1.50   1.50    -      -      -      -      -     3.00    -     3.00    -      -      -      -
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   Instructions:
+# CHECK-NEXT:  -      -      -      -      -      -      -      -      -     1.00    -      -      -      -     movbew %cx, (%rax)
+# CHECK-NEXT: 0.50   0.50    -      -      -      -      -     1.00    -      -      -      -      -      -     movbew (%rax), %cx
+# CHECK-NEXT:  -      -      -      -      -      -      -      -      -     1.00    -      -      -      -     movbel %ecx, (%rax)
+# CHECK-NEXT: 0.50   0.50    -      -      -      -      -     1.00    -      -      -      -      -      -     movbel (%rax), %ecx
+# CHECK-NEXT:  -      -      -      -      -      -      -      -      -     1.00    -      -      -      -     movbeq %rcx, (%rax)
+# CHECK-NEXT: 0.50   0.50    -      -      -      -      -     1.00    -      -      -      -      -      -     movbeq (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/Generic/resources-movbe.s b/test/tools/llvm-mca/X86/Generic/resources-movbe.s
new file mode 100644 (file)
index 0000000..aa86414
--- /dev/null
+++ b/test/tools/llvm-mca/X86/Generic/resources-movbe.s
@@ -0,0 +1,50 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  1      1     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbew (%rax), %cx
+# CHECK-NEXT:  1      1     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  1      1     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - SBDivider
+# CHECK-NEXT: [1]   - SBFPDivider
+# CHECK-NEXT: [2]   - SBPort0
+# CHECK-NEXT: [3]   - SBPort1
+# CHECK-NEXT: [4]   - SBPort4
+# CHECK-NEXT: [5]   - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]
+# CHECK-NEXT:  -      -     1.00   1.00   3.00   1.00   3.00   3.00
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]  Instructions:
+# CHECK-NEXT:  -      -      -      -     1.00    -     0.50   0.50   movbew   %cx, (%rax)
+# CHECK-NEXT:  -      -     0.33   0.33    -     0.33   0.50   0.50   movbew   (%rax), %cx
+# CHECK-NEXT:  -      -      -      -     1.00    -     0.50   0.50   movbel   %ecx, (%rax)
+# CHECK-NEXT:  -      -     0.33   0.33    -     0.33   0.50   0.50   movbel   (%rax), %ecx
+# CHECK-NEXT:  -      -      -      -     1.00    -     0.50   0.50   movbeq   %rcx, (%rax)
+# CHECK-NEXT:  -      -     0.33   0.33    -     0.33   0.50   0.50   movbeq   (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/Haswell/resources-movbe.s b/test/tools/llvm-mca/X86/Haswell/resources-movbe.s
new file mode 100644 (file)
index 0000000..02f5f0c
--- /dev/null
+++ b/test/tools/llvm-mca/X86/Haswell/resources-movbe.s
@@ -0,0 +1,52 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=haswell -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  3      2     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbew (%rax), %cx
+# CHECK-NEXT:  3      2     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  3      2     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - HWDivider
+# CHECK-NEXT: [1]   - HWFPDivider
+# CHECK-NEXT: [2]   - HWPort0
+# CHECK-NEXT: [3]   - HWPort1
+# CHECK-NEXT: [4]   - HWPort2
+# CHECK-NEXT: [5]   - HWPort3
+# CHECK-NEXT: [6]   - HWPort4
+# CHECK-NEXT: [7]   - HWPort5
+# CHECK-NEXT: [8]   - HWPort6
+# CHECK-NEXT: [9]   - HWPort7
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]
+# CHECK-NEXT:  -      -     0.50   2.50   2.50   2.50   3.00   2.50   0.50   1.00
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    Instructions:
+# CHECK-NEXT:  -      -     0.50    -     0.33   0.33   1.00    -     0.50   0.33   movbew     %cx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbew     (%rax), %cx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbel     %ecx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbel     (%rax), %ecx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbeq     %rcx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbeq     (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/SLM/resources-movbe.s b/test/tools/llvm-mca/X86/SLM/resources-movbe.s
new file mode 100644 (file)
index 0000000..2e670a4
--- /dev/null
+++ b/test/tools/llvm-mca/X86/SLM/resources-movbe.s
@@ -0,0 +1,50 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=slm -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  1      1     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  1      4     1.00    *                   movbew (%rax), %cx
+# CHECK-NEXT:  1      1     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  1      4     1.00    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  1      1     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  1      4     1.00    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - SLMDivider
+# CHECK-NEXT: [1]   - SLMFPDivider
+# CHECK-NEXT: [2]   - SLMFPMultiplier
+# CHECK-NEXT: [3]   - SLM_FPC_RSV0
+# CHECK-NEXT: [4]   - SLM_FPC_RSV1
+# CHECK-NEXT: [5]   - SLM_IEC_RSV0
+# CHECK-NEXT: [6]   - SLM_IEC_RSV1
+# CHECK-NEXT: [7]   - SLM_MEC_RSV
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]
+# CHECK-NEXT:  -      -      -      -      -     3.00   3.00   6.00
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    Instructions:
+# CHECK-NEXT:  -      -      -      -      -     0.50   0.50   1.00   movbew   %cx, (%rax)
+# CHECK-NEXT:  -      -      -      -      -     0.50   0.50   1.00   movbew   (%rax), %cx
+# CHECK-NEXT:  -      -      -      -      -     0.50   0.50   1.00   movbel   %ecx, (%rax)
+# CHECK-NEXT:  -      -      -      -      -     0.50   0.50   1.00   movbel   (%rax), %ecx
+# CHECK-NEXT:  -      -      -      -      -     0.50   0.50   1.00   movbeq   %rcx, (%rax)
+# CHECK-NEXT:  -      -      -      -      -     0.50   0.50   1.00   movbeq   (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/SkylakeClient/resources-movbe.s b/test/tools/llvm-mca/X86/SkylakeClient/resources-movbe.s
new file mode 100644 (file)
index 0000000..3b313eb
--- /dev/null
+++ b/test/tools/llvm-mca/X86/SkylakeClient/resources-movbe.s
@@ -0,0 +1,52 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=skylake -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  3      2     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbew (%rax), %cx
+# CHECK-NEXT:  3      2     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  3      2     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - SKLDivider
+# CHECK-NEXT: [1]   - SKLFPDivider
+# CHECK-NEXT: [2]   - SKLPort0
+# CHECK-NEXT: [3]   - SKLPort1
+# CHECK-NEXT: [4]   - SKLPort2
+# CHECK-NEXT: [5]   - SKLPort3
+# CHECK-NEXT: [6]   - SKLPort4
+# CHECK-NEXT: [7]   - SKLPort5
+# CHECK-NEXT: [8]   - SKLPort6
+# CHECK-NEXT: [9]   - SKLPort7
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]
+# CHECK-NEXT:  -      -      -     3.00   2.50   2.50   3.00   3.00    -     1.00
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    Instructions:
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbew     %cx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbew     (%rax), %cx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbel     %ecx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbel     (%rax), %ecx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbeq     %rcx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbeq     (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/SkylakeServer/resources-movbe.s b/test/tools/llvm-mca/X86/SkylakeServer/resources-movbe.s
new file mode 100644 (file)
index 0000000..b8e5f74
--- /dev/null
+++ b/test/tools/llvm-mca/X86/SkylakeServer/resources-movbe.s
@@ -0,0 +1,52 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=skylake-avx512 -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  3      2     1.00           *            movbew %cx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbew (%rax), %cx
+# CHECK-NEXT:  3      2     1.00           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  3      2     1.00           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  2      6     0.50    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - SKXDivider
+# CHECK-NEXT: [1]   - SKXFPDivider
+# CHECK-NEXT: [2]   - SKXPort0
+# CHECK-NEXT: [3]   - SKXPort1
+# CHECK-NEXT: [4]   - SKXPort2
+# CHECK-NEXT: [5]   - SKXPort3
+# CHECK-NEXT: [6]   - SKXPort4
+# CHECK-NEXT: [7]   - SKXPort5
+# CHECK-NEXT: [8]   - SKXPort6
+# CHECK-NEXT: [9]   - SKXPort7
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]
+# CHECK-NEXT:  -      -      -     3.00   2.50   2.50   3.00   3.00    -     1.00
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    Instructions:
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbew     %cx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbew     (%rax), %cx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbel     %ecx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbel     (%rax), %ecx
+# CHECK-NEXT:  -      -      -     0.50   0.33   0.33   1.00   0.50    -     0.33   movbeq     %rcx, (%rax)
+# CHECK-NEXT:  -      -      -     0.50   0.50   0.50    -     0.50    -      -     movbeq     (%rax), %rcx

diff --git a/test/tools/llvm-mca/X86/Znver1/resources-movbe.s b/test/tools/llvm-mca/X86/Znver1/resources-movbe.s
new file mode 100644 (file)
index 0000000..80450b2
--- /dev/null
+++ b/test/tools/llvm-mca/X86/Znver1/resources-movbe.s
@@ -0,0 +1,54 @@
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=znver1 -instruction-tables < %s | FileCheck %s
+
+movbe  %cx, (%rax)
+movbe  (%rax), %cx
+
+movbe  %ecx, (%rax)
+movbe  (%rax), %ecx
+
+movbe  %rcx, (%rax)
+movbe  (%rax), %rcx
+
+# CHECK:      Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
+# CHECK-NEXT:  1      5     0.50           *            movbew %cx, (%rax)
+# CHECK-NEXT:  1      5     0.50    *                   movbew (%rax), %cx
+# CHECK-NEXT:  1      5     0.50           *            movbel %ecx, (%rax)
+# CHECK-NEXT:  1      5     0.50    *                   movbel (%rax), %ecx
+# CHECK-NEXT:  1      5     0.50           *            movbeq %rcx, (%rax)
+# CHECK-NEXT:  1      5     0.50    *                   movbeq (%rax), %rcx
+
+# CHECK:      Resources:
+# CHECK-NEXT: [0]   - ZnAGU0
+# CHECK-NEXT: [1]   - ZnAGU1
+# CHECK-NEXT: [2]   - ZnALU0
+# CHECK-NEXT: [3]   - ZnALU1
+# CHECK-NEXT: [4]   - ZnALU2
+# CHECK-NEXT: [5]   - ZnALU3
+# CHECK-NEXT: [6]   - ZnDivider
+# CHECK-NEXT: [7]   - ZnFPU0
+# CHECK-NEXT: [8]   - ZnFPU1
+# CHECK-NEXT: [9]   - ZnFPU2
+# CHECK-NEXT: [10]  - ZnFPU3
+# CHECK-NEXT: [11]  - ZnMultiplier
+
+# CHECK:      Resource pressure per iteration:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]
+# CHECK-NEXT: 3.00   3.00   1.50   1.50   1.50   1.50    -      -      -      -      -      -
+
+# CHECK:      Resource pressure by instruction:
+# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   Instructions:
+# CHECK-NEXT: 0.50   0.50   0.25   0.25   0.25   0.25    -      -      -      -      -      -     movbew       %cx, (%rax)
+# CHECK-NEXT: 0.50   0.50   0.25   0.25   0.25   0.25    -      -      -      -      -      -     movbew       (%rax), %cx
+# CHECK-NEXT: 0.50   0.50   0.25   0.25   0.25   0.25    -      -      -      -      -      -     movbel       %ecx, (%rax)
+# CHECK-NEXT: 0.50   0.50   0.25   0.25   0.25   0.25    -      -      -      -      -      -     movbel       (%rax), %ecx
+# CHECK-NEXT: 0.50   0.50   0.25   0.25   0.25   0.25    -      -      -      -      -      -     movbeq       %rcx, (%rax)
+# CHECK-NEXT: 0.50   0.50   0.25   0.25   0.25   0.25    -      -      -      -      -      -     movbeq       (%rax), %rcx