static void command_table_init(AHCICommand *cmd)
{
RegH2DFIS *fis = &(cmd->fis);
+ uint16_t sect_count = (cmd->xbytes / AHCI_SECTOR_SIZE);
fis->fis_type = REG_H2D_FIS;
fis->flags = REG_H2D_FIS_CMD; /* "Command" bit */
fis->command = cmd->name;
- cmd->fis.feature_low = 0x00;
- cmd->fis.feature_high = 0x00;
- if (cmd->props->lba28 || cmd->props->lba48) {
- cmd->fis.device = ATA_DEVICE_LBA;
+
+ if (cmd->props->ncq) {
+ NCQFIS *ncqfis = (NCQFIS *)fis;
+ /* NCQ is weird and re-uses FIS frames for unrelated data.
+ * See SATA 3.2, 13.6.4.1 READ FPDMA QUEUED for an example. */
+ ncqfis->sector_low = sect_count & 0xFF;
+ ncqfis->sector_hi = (sect_count >> 8) & 0xFF;
+ ncqfis->device = NCQ_DEVICE_MAGIC;
+ /* Force Unit Access is bit 7 in the device register */
+ ncqfis->tag = 0; /* bits 3-7 are the NCQ tag */
+ ncqfis->prio = 0; /* bits 6,7 are a prio tag */
+ /* RARC bit is bit 0 of TAG field */
+ } else {
+ fis->feature_low = 0x00;
+ fis->feature_high = 0x00;
+ if (cmd->props->lba28 || cmd->props->lba48) {
+ fis->device = ATA_DEVICE_LBA;
+ }
+ fis->count = (cmd->xbytes / AHCI_SECTOR_SIZE);
}
- cmd->fis.count = (cmd->xbytes / AHCI_SECTOR_SIZE);
- cmd->fis.icc = 0x00;
- cmd->fis.control = 0x00;
- memset(cmd->fis.aux, 0x00, ARRAY_SIZE(cmd->fis.aux));
+ fis->icc = 0x00;
+ fis->control = 0x00;
+ memset(fis->aux, 0x00, ARRAY_SIZE(fis->aux));
}
AHCICommand *ahci_command_create(uint8_t command_name)
g_assert(!(props->lba28 && props->lba48));
g_assert(!(props->read && props->write));
g_assert(!props->size || props->data);
+ g_assert(!props->ncq || (props->ncq && props->lba48));
/* Defaults and book-keeping */
cmd->props = props;
void ahci_command_set_sizes(AHCICommand *cmd, uint64_t xbytes,
unsigned prd_size)
{
+ uint16_t sect_count;
+
/* Each PRD can describe up to 4MiB, and must not be odd. */
g_assert_cmphex(prd_size, <=, 4096 * 1024);
g_assert_cmphex(prd_size & 0x01, ==, 0x00);
cmd->prd_size = prd_size;
}
cmd->xbytes = xbytes;
- cmd->fis.count = (cmd->xbytes / AHCI_SECTOR_SIZE);
+ sect_count = (cmd->xbytes / AHCI_SECTOR_SIZE);
+
+ if (cmd->props->ncq) {
+ NCQFIS *nfis = (NCQFIS *)&(cmd->fis);
+ nfis->sector_low = sect_count & 0xFF;
+ nfis->sector_hi = (sect_count >> 8) & 0xFF;
+ } else {
+ cmd->fis.count = sect_count;
+ }
cmd->header.prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
}
#define CMDH_PMP (0xF000)
/* ATA device register masks */
-#define ATA_DEVICE_MAGIC 0xA0
+#define ATA_DEVICE_MAGIC 0xA0 /* used in ata1-3 */
#define ATA_DEVICE_LBA 0x40
+#define NCQ_DEVICE_MAGIC 0x40 /* for ncq device registers */
#define ATA_DEVICE_DRIVE 0x10
#define ATA_DEVICE_HEAD 0x0F
} __attribute__((__packed__)) RegH2DFIS;
/**
+ * Register host-to-device FIS structure, for NCQ commands.
+ * Actually just a RegH2DFIS, but with fields repurposed.
+ * Repurposed fields are annotated below.
+ */
+typedef struct NCQFIS {
+ /* DW0 */
+ uint8_t fis_type;
+ uint8_t flags;
+ uint8_t command;
+ uint8_t sector_low; /* H2D: Feature 7:0 */
+ /* DW1 */
+ uint8_t lba_lo[3];
+ uint8_t device;
+ /* DW2 */
+ uint8_t lba_hi[3];
+ uint8_t sector_hi; /* H2D: Feature 15:8 */
+ /* DW3 */
+ uint8_t tag; /* H2D: Count 0:7 */
+ uint8_t prio; /* H2D: Count 15:8 */
+ uint8_t icc;
+ uint8_t control;
+ /* DW4 */
+ uint8_t aux[4];
+} __attribute__((__packed__)) NCQFIS;
+
+/**
* Command List entry structure.
* The command list contains between 1-32 of these structures.
*/