Revert "ARM: dts: msm: Remove TCSR_QUSB2_PHY_CLAMP_DIG_N_1P8 for SDM660"

Commit c20c74d49cd7 ("ARM: dts: msm: Remove TCSR_QUSB2_PHY_CLAMP_DIG_N_1P8
for SDM660") is added to remove enabling/disabling clamp during
disconnect/connect. But it is required to enable clamp input to QUSB2PHY,
whenever 0.9V LDO is collapsed. Hence revert the change to add dtsi
property for enable/disable clamp.

Change-Id: I12009bd56d214499a73f7ea3e73d1c979c107ac9
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom/sdm660-common.dtsi b/arch/arm/boot/dts/qcom/sdm660-common.dtsi
index baced77..f75794b 100644 (file)
--- a/arch/arm/boot/dts/qcom/sdm660-common.dtsi
+++ b/arch/arm/boot/dts/qcom/sdm660-common.dtsi
@@ -267,8 +267,10 @@
        qusb_phy0: qusb@c012000 {
                compatible = "qcom,qusb2phy";
                reg = <0x0c012000 0x180>,
+                       <0x01fcb24c 0x4>,
                        <0x00188018 0x4>;
                reg-names = "qusb_phy_base",
+                       "tcsr_clamp_dig_n_1p8",
                        "ref_clk_addr";
                vdd-supply = <&pm660l_l1>;
                vdda18-supply = <&pm660_l10>;