- auto idle mode support
*/
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/input/mt.h>
-#include <linux/of_gpio.h>
/*
* Mouse Mode: some panel may configure the controller to mouse mode,
/* wake up controller by an falling edge of interrupt gpio. */
static int egalax_wake_up_device(struct i2c_client *client)
{
- struct device_node *np = client->dev.of_node;
- int gpio;
+ struct gpio_desc *gpio;
int ret;
- if (!np)
- return -ENODEV;
-
- gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
- if (!gpio_is_valid(gpio))
- return -ENODEV;
-
- ret = gpio_request(gpio, "egalax_irq");
- if (ret < 0) {
- dev_err(&client->dev,
- "request gpio failed, cannot wake up controller: %d\n",
- ret);
+ /* wake up controller via an falling edge on IRQ gpio. */
+ gpio = gpiod_get(&client->dev, "wakeup", GPIOD_OUT_HIGH);
+ ret = PTR_ERR_OR_ZERO(gpio);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "failed to request wakeup gpio, cannot wake up controller: %d\n",
+ ret);
return ret;
}
- /* wake up controller via an falling edge on IRQ gpio. */
- gpio_direction_output(gpio, 0);
- gpio_set_value(gpio, 1);
+ /* release the line */
+ gpiod_set_value_cansleep(gpio, 0);
- /* controller should be waken up, return irq. */
- gpio_direction_input(gpio);
- gpio_free(gpio);
+ /* controller should be woken up, return irq. */
+ gpiod_direction_input(gpio);
+ gpiod_put(gpio);
return 0;
}
/* controller may be in sleep, wake it up. */
error = egalax_wake_up_device(client);
- if (error) {
- dev_err(&client->dev, "Failed to wake up the controller\n");
+ if (error)
return error;
- }
error = egalax_firmware_version(client);
if (error < 0) {