obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
-obj-$(CONFIG_ARM_GIC) += irq-gic.o
+obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
--- /dev/null
+/*
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include "irq-gic-common.h"
+
+void gic_configure_irq(unsigned int irq, unsigned int type,
+ void __iomem *base, void (*sync_access)(void))
+{
+ u32 enablemask = 1 << (irq % 32);
+ u32 enableoff = (irq / 32) * 4;
+ u32 confmask = 0x2 << ((irq % 16) * 2);
+ u32 confoff = (irq / 16) * 4;
+ bool enabled = false;
+ u32 val;
+
+ /*
+ * Read current configuration register, and insert the config
+ * for "irq", depending on "type".
+ */
+ val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
+ if (type == IRQ_TYPE_LEVEL_HIGH)
+ val &= ~confmask;
+ else if (type == IRQ_TYPE_EDGE_RISING)
+ val |= confmask;
+
+ /*
+ * As recommended by the spec, disable the interrupt before changing
+ * the configuration
+ */
+ if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+ writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+ if (sync_access)
+ sync_access();
+ enabled = true;
+ }
+
+ /*
+ * Write back the new configuration, and possibly re-enable
+ * the interrupt.
+ */
+ writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
+
+ if (enabled)
+ writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+ if (sync_access)
+ sync_access();
+}
+
+void __init gic_dist_config(void __iomem *base, int gic_irqs,
+ void (*sync_access)(void))
+{
+ unsigned int i;
+
+ /*
+ * Set all global interrupts to be level triggered, active low.
+ */
+ for (i = 32; i < gic_irqs; i += 16)
+ writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
+
+ /*
+ * Set priority on all global interrupts.
+ */
+ for (i = 32; i < gic_irqs; i += 4)
+ writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
+
+ /*
+ * Disable all interrupts. Leave the PPI and SGIs alone
+ * as they are enabled by redistributor registers.
+ */
+ for (i = 32; i < gic_irqs; i += 32)
+ writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
+
+ if (sync_access)
+ sync_access();
+}
+
+void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
+{
+ int i;
+
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
+ writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+
+ if (sync_access)
+ sync_access();
+}
--- /dev/null
+/*
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _IRQ_GIC_COMMON_H
+#define _IRQ_GIC_COMMON_H
+
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+
+void gic_configure_irq(unsigned int irq, unsigned int type,
+ void __iomem *base, void (*sync_access)(void));
+void gic_dist_config(void __iomem *base, int gic_irqs,
+ void (*sync_access)(void));
+void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
+
+#endif /* _IRQ_GIC_COMMON_H */
#include <asm/exception.h>
#include <asm/smp_plat.h>
+#include "irq-gic-common.h"
#include "irqchip.h"
union gic_base {
{
void __iomem *base = gic_dist_base(d);
unsigned int gicirq = gic_irq(d);
- u32 enablemask = 1 << (gicirq % 32);
- u32 enableoff = (gicirq / 32) * 4;
- u32 confmask = 0x2 << ((gicirq % 16) * 2);
- u32 confoff = (gicirq / 16) * 4;
- bool enabled = false;
- u32 val;
/* Interrupt configuration for SGIs can't be changed */
if (gicirq < 16)
if (gic_arch_extn.irq_set_type)
gic_arch_extn.irq_set_type(d, type);
- val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
- if (type == IRQ_TYPE_LEVEL_HIGH)
- val &= ~confmask;
- else if (type == IRQ_TYPE_EDGE_RISING)
- val |= confmask;
-
- /*
- * As recommended by the spec, disable the interrupt before changing
- * the configuration
- */
- if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
- writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
- enabled = true;
- }
-
- writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-
- if (enabled)
- writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+ gic_configure_irq(gicirq, type, base, NULL);
raw_spin_unlock(&irq_controller_lock);
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
- * Set all global interrupts to be level triggered, active low.
- */
- for (i = 32; i < gic_irqs; i += 16)
- writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
-
- /*
* Set all global interrupts to this CPU only.
*/
cpumask = gic_get_cpumask(gic);
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
- /*
- * Set priority on all global interrupts.
- */
- for (i = 32; i < gic_irqs; i += 4)
- writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
-
- /*
- * Disable all interrupts. Leave the PPI and SGIs alone
- * as these enables are banked registers.
- */
- for (i = 32; i < gic_irqs; i += 32)
- writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+ gic_dist_config(base, gic_irqs, NULL);
writel_relaxed(1, base + GIC_DIST_CTRL);
}
if (i != cpu)
gic_cpu_map[i] &= ~cpu_mask;
- /*
- * Deal with the banked PPI and SGI interrupts - disable all
- * PPI interrupts, ensure all SGI interrupts are enabled.
- */
- writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
- writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
- /*
- * Set priority on PPI and SGI interrupts
- */
- for (i = 0; i < 32; i += 4)
- writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+ gic_cpu_config(dist_base, NULL);
writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
writel_relaxed(1, base + GIC_CPU_CTRL);
OSDN Git Service
