* Authentication algorithm number, i.e., starting at the Authentication
* transaction sequence number field.
* @auth_data_len: Length of auth_data buffer in octets
+ * @link_id: if >= 0, indicates authentication should be done as an MLD,
+ * the interface address is included as the MLD address and the
+ * necessary link (with the given link_id) will be created (and
+ * given an MLD address) by the driver
+ * @ap_mld_addr: AP MLD address in case of authentication request with
+ * an AP MLD, valid iff @link_id >= 0
*/
struct cfg80211_auth_request {
struct cfg80211_bss *bss;
u8 key_len, key_idx;
const u8 *auth_data;
size_t auth_data_len;
+ s8 link_id;
+ const u8 *ap_mld_addr;
+};
+
+/**
+ * struct cfg80211_assoc_link - per-link information for MLO association
+ * @bss: the BSS pointer, see also &struct cfg80211_assoc_request::bss;
+ * if this is %NULL for a link, that link is not requested
+ * @elems: extra elements for the per-STA profile for this link
+ * @elems_len: length of the elements
+ */
+struct cfg80211_assoc_link {
+ struct cfg80211_bss *bss;
+ const u8 *elems;
+ size_t elems_len;
};
/**
* given a reference that it must give back to cfg80211_send_rx_assoc()
* or to cfg80211_assoc_timeout(). To ensure proper refcounting, new
* association requests while already associating must be rejected.
+ * This also applies to the @links.bss parameter, which is used instead
+ * of this one (it is %NULL) for MLO associations.
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
* @ie_len: Length of ie buffer in octets
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
* with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
* @s1g_capa: S1G capability override
* @s1g_capa_mask: S1G capability override mask
+ * @links: per-link information for MLO connections
+ * @link_id: >= 0 for MLO connections, where links are given, and indicates
+ * the link on which the association request should be sent
+ * @ap_mld_addr: AP MLD address in case of MLO association request,
+ * valid iff @link_id >= 0
*/
struct cfg80211_assoc_request {
struct cfg80211_bss *bss;
size_t fils_kek_len;
const u8 *fils_nonces;
struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask;
+ struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS];
+ const u8 *ap_mld_addr;
+ s8 link_id;
};
/**
* various commands that need a link ID to operate.
* @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some
* per-link information and a link ID.
+ * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as
+ * authenticate/associate.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
NL80211_ATTR_MLO_LINKS,
NL80211_ATTR_MLO_LINK_ID,
+ NL80211_ATTR_MLD_ADDR,
/* add attributes here, update the policy in nl80211.c */
if (!req->bss)
return -ENOENT;
+ if (req->link_id >= 0 &&
+ !(wdev->wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO))
+ return -EINVAL;
+
if (req->auth_type == NL80211_AUTHTYPE_SHARED_KEY) {
if (!req->key || !req->key_len ||
req->key_idx < 0 || req->key_idx > 3)
struct cfg80211_assoc_request *req)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- int err;
+ int err, i, j;
ASSERT_WDEV_LOCK(wdev);
+ for (i = 1; i < ARRAY_SIZE(req->links); i++) {
+ if (!req->links[i].bss)
+ continue;
+ for (j = 0; j < i; j++) {
+ if (req->links[i].bss == req->links[j].bss)
+ return -EINVAL;
+ }
+ }
+
if (wdev->connected &&
(!req->prev_bssid ||
!ether_addr_equal(wdev->u.client.connected_addr, req->prev_bssid)))
err = rdev_assoc(rdev, dev, req);
if (!err) {
- cfg80211_ref_bss(&rdev->wiphy, req->bss);
- cfg80211_hold_bss(bss_from_pub(req->bss));
+ int link_id;
+
+ if (req->bss) {
+ cfg80211_ref_bss(&rdev->wiphy, req->bss);
+ cfg80211_hold_bss(bss_from_pub(req->bss));
+ }
+
+ for (link_id = 0; link_id < ARRAY_SIZE(req->links); link_id++) {
+ if (!req->links[link_id].bss)
+ continue;
+ cfg80211_ref_bss(&rdev->wiphy, req->links[link_id].bss);
+ cfg80211_hold_bss(bss_from_pub(req->links[link_id].bss));
+ }
}
return err;
}
NLA_POLICY_NESTED_ARRAY(nl80211_policy),
[NL80211_ATTR_MLO_LINK_ID] =
NLA_POLICY_RANGE(NLA_U8, 0, IEEE80211_MLD_MAX_NUM_LINKS),
+ [NL80211_ATTR_MLD_ADDR] = NLA_POLICY_EXACT_LEN(ETH_ALEN),
};
/* policy for the key attributes */
req.key = key.p.key;
req.key_len = key.p.key_len;
req.key_idx = key.idx;
+ req.link_id = nl80211_link_id_or_invalid(info->attrs);
+ if (req.link_id >= 0) {
+ if (!info->attrs[NL80211_ATTR_MLD_ADDR])
+ return -EINVAL;
+ req.ap_mld_addr = nla_data(info->attrs[NL80211_ATTR_MLD_ADDR]);
+ }
req.bss = cfg80211_get_bss(&rdev->wiphy, chan, bssid, ssid, ssid_len,
IEEE80211_BSS_TYPE_ESS,
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct cfg80211_assoc_request req = {};
+ struct nlattr **attrs = NULL;
const u8 *bssid, *ssid;
+ unsigned int link_id;
int err, ssid_len;
if (dev->ieee80211_ptr->conn_owner_nlportid &&
sizeof(req.s1g_capa));
}
- req.bss = nl80211_assoc_bss(rdev, ssid, ssid_len, info->attrs, &bssid);
- if (IS_ERR(req.bss))
- return PTR_ERR(req.bss);
+ req.link_id = nl80211_link_id_or_invalid(info->attrs);
+
+ if (info->attrs[NL80211_ATTR_MLO_LINKS]) {
+ unsigned int attrsize = NUM_NL80211_ATTR * sizeof(*attrs);
+ struct nlattr *link;
+ int rem = 0;
+
+ if (req.link_id < 0)
+ return -EINVAL;
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_MLO))
+ return -EINVAL;
+
+ if (info->attrs[NL80211_ATTR_MAC] ||
+ info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
+ !info->attrs[NL80211_ATTR_MLD_ADDR])
+ return -EINVAL;
+
+ req.ap_mld_addr = nla_data(info->attrs[NL80211_ATTR_MLD_ADDR]);
+
+ attrs = kzalloc(attrsize, GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ nla_for_each_nested(link,
+ info->attrs[NL80211_ATTR_MLO_LINKS],
+ rem) {
+ memset(attrs, 0, attrsize);
+
+ nla_parse_nested(attrs, NL80211_ATTR_MAX,
+ link, NULL, NULL);
+
+ if (!attrs[NL80211_ATTR_MLO_LINK_ID]) {
+ err = -EINVAL;
+ goto free;
+ }
+
+ link_id = nla_get_u8(attrs[NL80211_ATTR_MLO_LINK_ID]);
+ /* cannot use the same link ID again */
+ if (req.links[link_id].bss) {
+ err = -EINVAL;
+ goto free;
+ }
+ req.links[link_id].bss =
+ nl80211_assoc_bss(rdev, ssid, ssid_len, attrs,
+ &bssid);
+ if (IS_ERR(req.links[link_id].bss)) {
+ err = PTR_ERR(req.links[link_id].bss);
+ goto free;
+ }
+
+ if (attrs[NL80211_ATTR_IE]) {
+ req.links[link_id].elems =
+ nla_data(attrs[NL80211_ATTR_IE]);
+ req.links[link_id].elems_len =
+ nla_len(attrs[NL80211_ATTR_IE]);
+ }
+ }
+
+ if (!req.links[req.link_id].bss) {
+ err = -EINVAL;
+ goto free;
+ }
+
+ kfree(attrs);
+ attrs = NULL;
+ } else {
+ if (req.link_id >= 0)
+ return -EINVAL;
+
+ req.bss = nl80211_assoc_bss(rdev, ssid, ssid_len, info->attrs,
+ &bssid);
+ if (IS_ERR(req.bss))
+ return PTR_ERR(req.bss);
+ }
err = nl80211_crypto_settings(rdev, info, &req.crypto, 1);
if (!err) {
wdev_unlock(dev->ieee80211_ptr);
}
+free:
+ for (link_id = 0; link_id < ARRAY_SIZE(req.links); link_id++)
+ cfg80211_put_bss(&rdev->wiphy, req.links[link_id].bss);
cfg80211_put_bss(&rdev->wiphy, req.bss);
+ kfree(attrs);
return err;
}
params->ssid, params->ssid_len,
IEEE80211_BSS_TYPE_ESS,
IEEE80211_PRIVACY_ANY);
+ auth_req.link_id = -1;
err = cfg80211_mlme_auth(rdev, wdev->netdev, &auth_req);
cfg80211_put_bss(&rdev->wiphy, auth_req.bss);
return err;
req.ht_capa_mask = params->ht_capa_mask;
req.vht_capa = params->vht_capa;
req.vht_capa_mask = params->vht_capa_mask;
+ req.link_id = -1;
req.bss = cfg80211_get_bss(&rdev->wiphy, params->channel,
params->bssid,
OSDN Git Service
