OSDN Git Service

[media] Support for Asus MyCinema U3100Mini Plus
authorOliver Schinagl <oliver@schinagl.nl>
Thu, 20 Sep 2012 17:57:17 +0000 (14:57 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Thu, 27 Sep 2012 18:14:17 +0000 (15:14 -0300)
This is initial support for the Asus MyCinema U3100Mini Plus. The driver
in its current form gets detected and loads properly.
Scanning using dvbscan works without problems, Locking onto a channel
using tzap also works fine. Only playback using tzap -r + mplayer was
tested and was fully functional.
It uses the af9035 USB Bridge chip, with an af9033 demodulator. The tuner
used is the FCI FC2580.

Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-core/dvb-usb-ids.h
drivers/media/dvb-frontends/af9033.c
drivers/media/dvb-frontends/af9033.h
drivers/media/dvb-frontends/af9033_priv.h
drivers/media/tuners/fc2580.c
drivers/media/usb/dvb-usb-v2/Kconfig
drivers/media/usb/dvb-usb-v2/af9035.c
drivers/media/usb/dvb-usb-v2/af9035.h

index d572307..58e0220 100644 (file)
 #define USB_PID_ASUS_U3000                             0x171f
 #define USB_PID_ASUS_U3000H                            0x1736
 #define USB_PID_ASUS_U3100                             0x173f
+#define USB_PID_ASUS_U3100MINI_PLUS                    0x1779
 #define USB_PID_YUAN_EC372S                            0x1edc
 #define USB_PID_YUAN_STK7700PH                         0x1f08
 #define USB_PID_YUAN_PD378S                            0x2edc
index 56e9611..8162d93 100644 (file)
@@ -314,6 +314,10 @@ static int af9033_init(struct dvb_frontend *fe)
                len = ARRAY_SIZE(tuner_init_tda18218);
                init = tuner_init_tda18218;
                break;
+       case AF9033_TUNER_FC2580:
+               len = ARRAY_SIZE(tuner_init_fc2580);
+               init = tuner_init_fc2580;
+               break;
        default:
                dev_dbg(&state->i2c->dev, "%s: unsupported tuner ID=%d\n",
                                __func__, state->cfg.tuner);
index 288622b..bfa4313 100644 (file)
@@ -42,6 +42,7 @@ struct af9033_config {
 #define AF9033_TUNER_FC0011      0x28 /* Fitipower FC0011 */
 #define AF9033_TUNER_MXL5007T    0xa0 /* MaxLinear MxL5007T */
 #define AF9033_TUNER_TDA18218    0xa1 /* NXP TDA 18218HN */
+#define AF9033_TUNER_FC2580      0x32 /* FCI FC2580 */
        u8 tuner;
 
        /*
index 0b783b9..34dddcd 100644 (file)
@@ -466,5 +466,42 @@ static const struct reg_val tuner_init_tda18218[] = {
        {0x80f1e6, 0x00},
 };
 
+/* FCI FC2580 tuner init */
+static const struct reg_val tuner_init_fc2580[] = {
+       { 0x800046, 0x32 },
+       { 0x800057, 0x01 },
+       { 0x800058, 0x00 },
+       { 0x80005f, 0x00 },
+       { 0x800060, 0x00 },
+       { 0x800071, 0x05 },
+       { 0x800072, 0x02 },
+       { 0x800074, 0x01 },
+       { 0x800079, 0x01 },
+       { 0x800093, 0x00 },
+       { 0x800094, 0x00 },
+       { 0x800095, 0x00 },
+       { 0x800096, 0x05 },
+       { 0x8000b3, 0x01 },
+       { 0x8000c3, 0x01 },
+       { 0x8000c4, 0x00 },
+       { 0x80f007, 0x00 },
+       { 0x80f00c, 0x19 },
+       { 0x80f00d, 0x1A },
+       { 0x80f00e, 0x00 },
+       { 0x80f00f, 0x02 },
+       { 0x80f010, 0x00 },
+       { 0x80f011, 0x02 },
+       { 0x80f012, 0x00 },
+       { 0x80f013, 0x02 },
+       { 0x80f014, 0x00 },
+       { 0x80f015, 0x02 },
+       { 0x80f01f, 0x96 },
+       { 0x80f020, 0x00 },
+       { 0x80f029, 0x96 },
+       { 0x80f02a, 0x00 },
+       { 0x80f077, 0x01 },
+       { 0x80f1e6, 0x01 },
+};
+
 #endif /* AF9033_PRIV_H */
 
index afc0491..51bc39c 100644 (file)
@@ -498,8 +498,9 @@ struct dvb_frontend *fc2580_attach(struct dvb_frontend *fe,
 
        dev_dbg(&priv->i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id);
 
-       if (chip_id != 0x56)
+       if ((chip_id != 0x56) && (chip_id != 0x5a)) {
                goto err;
+       }
 
        dev_info(&priv->i2c->dev,
                        "%s: FCI FC2580 successfully identified\n",
index e09930c..834bfec 100644 (file)
@@ -40,6 +40,7 @@ config DVB_USB_AF9035
        select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
        select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
        select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
+       select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
        help
          Say Y here to support the Afatech AF9035 based DVB USB receiver.
 
index 84b3b27..aabd3fc 100644 (file)
@@ -513,6 +513,7 @@ static int af9035_read_config(struct dvb_usb_device *d)
                case AF9033_TUNER_FC0011:
                case AF9033_TUNER_MXL5007T:
                case AF9033_TUNER_TDA18218:
+               case AF9033_TUNER_FC2580:
                        state->af9033_config[i].spec_inv = 1;
                        break;
                default:
@@ -798,6 +799,11 @@ static struct tda18218_config af9035_tda18218_config = {
        .i2c_wr_max = 21,
 };
 
+static const struct fc2580_config af9035_fc2580_config = {
+       .i2c_addr = 0x56,
+       .clock = 16384000,
+};
+
 static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
 {
        struct state *state = adap_to_priv(adap);
@@ -882,6 +888,25 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
                fe = dvb_attach(tda18218_attach, adap->fe[0],
                                &d->i2c_adap, &af9035_tda18218_config);
                break;
+       case AF9033_TUNER_FC2580:
+               /* Tuner enable using gpiot2_o, gpiot2_en and gpiot2_on  */
+               ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01);
+               if (ret < 0)
+                       goto err;
+
+               ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01);
+               if (ret < 0)
+                       goto err;
+
+               ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01);
+               if (ret < 0)
+                       goto err;
+
+               usleep_range(10000, 50000);
+               /* attach tuner */
+               fe = dvb_attach(fc2580_attach, adap->fe[0],
+                               &d->i2c_adap, &af9035_fc2580_config);
+               break;
        default:
                fe = NULL;
        }
@@ -1106,6 +1131,8 @@ static const struct usb_device_id af9035_id_table[] = {
                &af9035_props, "AVerMedia HD Volar (A867)", NULL) },
        { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR,
                &af9035_props, "AVerMedia Twinstar (A825)", NULL) },
+       { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS,
+               &af9035_props, "Asus U3100Mini Plus", NULL) },
        { }
 };
 MODULE_DEVICE_TABLE(usb, af9035_id_table);
index de8e761..75ef1ec 100644 (file)
@@ -28,6 +28,7 @@
 #include "fc0011.h"
 #include "mxl5007t.h"
 #include "tda18218.h"
+#include "fc2580.h"
 
 struct reg_val {
        u32 reg;