select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
select PERF_EVENTS
select RTC_LIB
+ select RTC_MC146818_LIB
select SPARSE_IRQ
select SRCU
select SYSCTL_EXCEPTION_TRACE
config RTC_LIB
bool
+config RTC_MC146818_LIB
+ bool
+ select RTC_LIB
+
menuconfig RTC_CLASS
bool "Real Time Clock"
default n
tristate "PC-style 'CMOS'"
depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 || MN10300
default y if X86
+ select RTC_MC146818_LIB
help
Say "yes" here to get direct support for the real time clock
found in every PC or ACPI-based system, and some other boards.
config RTC_DRV_ALPHA
bool "Alpha PC-style CMOS"
depends on ALPHA
+ select RTC_MC146818_LIB
default y
help
Direct support for the real-time clock found on every Alpha
obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o
obj-$(CONFIG_RTC_SYSTOHC) += systohc.o
obj-$(CONFIG_RTC_CLASS) += rtc-core.o
+obj-$(CONFIG_RTC_MC146818_LIB) += rtc-mc146818-lib.o
rtc-core-y := class.o interface.o
ifdef CONFIG_RTC_DRV_EFI
--- /dev/null
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/mc146818rtc.h>
+
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif
+
+/*
+ * Returns true if a clock update is in progress
+ */
+static inline unsigned char mc146818_is_updating(void)
+{
+ unsigned char uip;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return uip;
+}
+
+unsigned int mc146818_get_time(struct rtc_time *time)
+{
+ unsigned char ctrl;
+ unsigned long flags;
+ unsigned char century = 0;
+
+#ifdef CONFIG_MACH_DECSTATION
+ unsigned int real_year;
+#endif
+
+ /*
+ * read RTC once any update in progress is done. The update
+ * can take just over 2ms. We wait 20ms. There is no need to
+ * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+ * If you need to know *exactly* when a second has started, enable
+ * periodic update complete interrupts, (via ioctl) and then
+ * immediately read /dev/rtc which will block until you get the IRQ.
+ * Once the read clears, read the RTC time (again via ioctl). Easy.
+ */
+ if (mc146818_is_updating())
+ mdelay(20);
+
+ /*
+ * Only the values that we read from the RTC are set. We leave
+ * tm_wday, tm_yday and tm_isdst untouched. Even though the
+ * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+ * by the RTC when initially set to a non-zero value.
+ */
+ spin_lock_irqsave(&rtc_lock, flags);
+ time->tm_sec = CMOS_READ(RTC_SECONDS);
+ time->tm_min = CMOS_READ(RTC_MINUTES);
+ time->tm_hour = CMOS_READ(RTC_HOURS);
+ time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
+ time->tm_mon = CMOS_READ(RTC_MONTH);
+ time->tm_year = CMOS_READ(RTC_YEAR);
+#ifdef CONFIG_MACH_DECSTATION
+ real_year = CMOS_READ(RTC_DEC_YEAR);
+#endif
+#ifdef CONFIG_ACPI
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ century = CMOS_READ(acpi_gbl_FADT.century);
+#endif
+ ctrl = CMOS_READ(RTC_CONTROL);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ {
+ time->tm_sec = bcd2bin(time->tm_sec);
+ time->tm_min = bcd2bin(time->tm_min);
+ time->tm_hour = bcd2bin(time->tm_hour);
+ time->tm_mday = bcd2bin(time->tm_mday);
+ time->tm_mon = bcd2bin(time->tm_mon);
+ time->tm_year = bcd2bin(time->tm_year);
+ century = bcd2bin(century);
+ }
+
+#ifdef CONFIG_MACH_DECSTATION
+ time->tm_year += real_year - 72;
+#endif
+
+ if (century)
+ time->tm_year += (century - 19) * 100;
+
+ /*
+ * Account for differences between how the RTC uses the values
+ * and how they are defined in a struct rtc_time;
+ */
+ if (time->tm_year <= 69)
+ time->tm_year += 100;
+
+ time->tm_mon--;
+
+ return RTC_24H;
+}
+EXPORT_SYMBOL_GPL(mc146818_get_time);
+
+/* Set the current date and time in the real time clock. */
+int mc146818_set_time(struct rtc_time *time)
+{
+ unsigned long flags;
+ unsigned char mon, day, hrs, min, sec;
+ unsigned char save_control, save_freq_select;
+ unsigned int yrs;
+#ifdef CONFIG_MACH_DECSTATION
+ unsigned int real_yrs, leap_yr;
+#endif
+ unsigned char century = 0;
+
+ yrs = time->tm_year;
+ mon = time->tm_mon + 1; /* tm_mon starts at zero */
+ day = time->tm_mday;
+ hrs = time->tm_hour;
+ min = time->tm_min;
+ sec = time->tm_sec;
+
+ if (yrs > 255) /* They are unsigned */
+ return -EINVAL;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+#ifdef CONFIG_MACH_DECSTATION
+ real_yrs = yrs;
+ leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
+ !((yrs + 1900) % 400));
+ yrs = 72;
+
+ /*
+ * We want to keep the year set to 73 until March
+ * for non-leap years, so that Feb, 29th is handled
+ * correctly.
+ */
+ if (!leap_yr && mon < 3) {
+ real_yrs--;
+ yrs = 73;
+ }
+#endif
+
+#ifdef CONFIG_ACPI
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century) {
+ century = (yrs + 1900) / 100;
+ yrs %= 100;
+ }
+#endif
+
+ /* These limits and adjustments are independent of
+ * whether the chip is in binary mode or not.
+ */
+ if (yrs > 169) {
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return -EINVAL;
+ }
+
+ if (yrs >= 100)
+ yrs -= 100;
+
+ if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
+ || RTC_ALWAYS_BCD) {
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hrs = bin2bcd(hrs);
+ day = bin2bcd(day);
+ mon = bin2bcd(mon);
+ yrs = bin2bcd(yrs);
+ century = bin2bcd(century);
+ }
+
+ save_control = CMOS_READ(RTC_CONTROL);
+ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+#ifdef CONFIG_MACH_DECSTATION
+ CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
+#endif
+ CMOS_WRITE(yrs, RTC_YEAR);
+ CMOS_WRITE(mon, RTC_MONTH);
+ CMOS_WRITE(day, RTC_DAY_OF_MONTH);
+ CMOS_WRITE(hrs, RTC_HOURS);
+ CMOS_WRITE(min, RTC_MINUTES);
+ CMOS_WRITE(sec, RTC_SECONDS);
+#ifdef CONFIG_ACPI
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ CMOS_WRITE(century, acpi_gbl_FADT.century);
+#endif
+
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mc146818_set_time);
#include <linux/bcd.h>
#include <linux/delay.h>
-#ifdef CONFIG_ACPI
-#include <linux/acpi.h>
-#endif
-
#ifdef __KERNEL__
#include <linux/spinlock.h> /* spinlock_t */
extern spinlock_t rtc_lock; /* serialize CMOS RAM access */
#define RTC_IO_EXTENT_USED RTC_IO_EXTENT
#endif /* ARCH_RTC_LOCATION */
-/*
- * Returns true if a clock update is in progress
- */
-static inline unsigned char mc146818_is_updating(void)
-{
- unsigned char uip;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
- spin_unlock_irqrestore(&rtc_lock, flags);
- return uip;
-}
-
-static inline unsigned int mc146818_get_time(struct rtc_time *time)
-{
- unsigned char ctrl;
- unsigned long flags;
- unsigned char century = 0;
-
-#ifdef CONFIG_MACH_DECSTATION
- unsigned int real_year;
-#endif
-
- /*
- * read RTC once any update in progress is done. The update
- * can take just over 2ms. We wait 20ms. There is no need to
- * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
- * If you need to know *exactly* when a second has started, enable
- * periodic update complete interrupts, (via ioctl) and then
- * immediately read /dev/rtc which will block until you get the IRQ.
- * Once the read clears, read the RTC time (again via ioctl). Easy.
- */
- if (mc146818_is_updating())
- mdelay(20);
-
- /*
- * Only the values that we read from the RTC are set. We leave
- * tm_wday, tm_yday and tm_isdst untouched. Even though the
- * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
- * by the RTC when initially set to a non-zero value.
- */
- spin_lock_irqsave(&rtc_lock, flags);
- time->tm_sec = CMOS_READ(RTC_SECONDS);
- time->tm_min = CMOS_READ(RTC_MINUTES);
- time->tm_hour = CMOS_READ(RTC_HOURS);
- time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
- time->tm_mon = CMOS_READ(RTC_MONTH);
- time->tm_year = CMOS_READ(RTC_YEAR);
-#ifdef CONFIG_MACH_DECSTATION
- real_year = CMOS_READ(RTC_DEC_YEAR);
-#endif
-#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century)
- century = CMOS_READ(acpi_gbl_FADT.century);
-#endif
- ctrl = CMOS_READ(RTC_CONTROL);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- {
- time->tm_sec = bcd2bin(time->tm_sec);
- time->tm_min = bcd2bin(time->tm_min);
- time->tm_hour = bcd2bin(time->tm_hour);
- time->tm_mday = bcd2bin(time->tm_mday);
- time->tm_mon = bcd2bin(time->tm_mon);
- time->tm_year = bcd2bin(time->tm_year);
- century = bcd2bin(century);
- }
-
-#ifdef CONFIG_MACH_DECSTATION
- time->tm_year += real_year - 72;
-#endif
-
- if (century)
- time->tm_year += (century - 19) * 100;
-
- /*
- * Account for differences between how the RTC uses the values
- * and how they are defined in a struct rtc_time;
- */
- if (time->tm_year <= 69)
- time->tm_year += 100;
-
- time->tm_mon--;
-
- return RTC_24H;
-}
-
-/* Set the current date and time in the real time clock. */
-static inline int mc146818_set_time(struct rtc_time *time)
-{
- unsigned long flags;
- unsigned char mon, day, hrs, min, sec;
- unsigned char save_control, save_freq_select;
- unsigned int yrs;
-#ifdef CONFIG_MACH_DECSTATION
- unsigned int real_yrs, leap_yr;
-#endif
- unsigned char century = 0;
-
- yrs = time->tm_year;
- mon = time->tm_mon + 1; /* tm_mon starts at zero */
- day = time->tm_mday;
- hrs = time->tm_hour;
- min = time->tm_min;
- sec = time->tm_sec;
-
- if (yrs > 255) /* They are unsigned */
- return -EINVAL;
-
- spin_lock_irqsave(&rtc_lock, flags);
-#ifdef CONFIG_MACH_DECSTATION
- real_yrs = yrs;
- leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
- !((yrs + 1900) % 400));
- yrs = 72;
-
- /*
- * We want to keep the year set to 73 until March
- * for non-leap years, so that Feb, 29th is handled
- * correctly.
- */
- if (!leap_yr && mon < 3) {
- real_yrs--;
- yrs = 73;
- }
-#endif
-
-#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century) {
- century = (yrs + 1900) / 100;
- yrs %= 100;
- }
-#endif
-
- /* These limits and adjustments are independent of
- * whether the chip is in binary mode or not.
- */
- if (yrs > 169) {
- spin_unlock_irqrestore(&rtc_lock, flags);
- return -EINVAL;
- }
-
- if (yrs >= 100)
- yrs -= 100;
-
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
- || RTC_ALWAYS_BCD) {
- sec = bin2bcd(sec);
- min = bin2bcd(min);
- hrs = bin2bcd(hrs);
- day = bin2bcd(day);
- mon = bin2bcd(mon);
- yrs = bin2bcd(yrs);
- century = bin2bcd(century);
- }
-
- save_control = CMOS_READ(RTC_CONTROL);
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-#ifdef CONFIG_MACH_DECSTATION
- CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
-#endif
- CMOS_WRITE(yrs, RTC_YEAR);
- CMOS_WRITE(mon, RTC_MONTH);
- CMOS_WRITE(day, RTC_DAY_OF_MONTH);
- CMOS_WRITE(hrs, RTC_HOURS);
- CMOS_WRITE(min, RTC_MINUTES);
- CMOS_WRITE(sec, RTC_SECONDS);
-#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century)
- CMOS_WRITE(century, acpi_gbl_FADT.century);
-#endif
-
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
+unsigned int mc146818_get_time(struct rtc_time *time);
+int mc146818_set_time(struct rtc_time *time);
#endif /* _MC146818RTC_H */
OSDN Git Service
