mlxsw: reg: Add QoS Port DSCP to Priority Mapping Register

Add QPDP. This register controls the port default Switch Priority and
Color. The default Switch Priority and Color are used for frames where the
trust state uses default values. Currently there are two cases where this
applies: a port is in trust-PCP state, but a packet arrives untagged; and a
port is in trust-DSCP state, but a non-IP packet arrives.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 2b8b4ed..fd59280 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -3748,6 +3748,38 @@ mlxsw_reg_qpdsm_prio_pack(char *payload, unsigned short prio, u8 dscp)
        mlxsw_reg_qpdsm_prio_entry_color2_dscp_set(payload, prio, dscp);
 }
 
+/* QPDP - QoS Port DSCP to Priority Mapping Register
+ * -------------------------------------------------
+ * This register controls the port default Switch Priority and Color. The
+ * default Switch Priority and Color are used for frames where the trust state
+ * uses default values. All member ports of a LAG should be configured with the
+ * same default values.
+ */
+#define MLXSW_REG_QPDP_ID 0x4007
+#define MLXSW_REG_QPDP_LEN 0x8
+
+MLXSW_REG_DEFINE(qpdp, MLXSW_REG_QPDP_ID, MLXSW_REG_QPDP_LEN);
+
+/* reg_qpdp_local_port
+ * Local Port. Supported for data packets from CPU port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, qpdp, local_port, 0x00, 16, 8);
+
+/* reg_qpdp_switch_prio
+ * Default port Switch Priority (default 0)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qpdp, switch_prio, 0x04, 0, 4);
+
+static inline void mlxsw_reg_qpdp_pack(char *payload, u8 local_port,
+                                      u8 switch_prio)
+{
+       MLXSW_REG_ZERO(qpdp, payload);
+       mlxsw_reg_qpdp_local_port_set(payload, local_port);
+       mlxsw_reg_qpdp_switch_prio_set(payload, switch_prio);
+}
+
 /* QPDPM - QoS Port DSCP to Priority Mapping Register
  * --------------------------------------------------
  * This register controls the mapping from DSCP field to
@@ -10580,6 +10612,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
        MLXSW_REG(qeec),
        MLXSW_REG(qrwe),
        MLXSW_REG(qpdsm),
+       MLXSW_REG(qpdp),
        MLXSW_REG(qpdpm),
        MLXSW_REG(qtctm),
        MLXSW_REG(qpsc),