MIPS: ingenic: JZ4725B: Add IPU node

Add a devicetree node for the Image Processing Unit (IPU) found in the
JZ4725B. Connect it with graph nodes to the LCD node. The LCD driver
will expect the IPU node to be accessed through graph port #8, as stated
in the bindings documentation.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
index 89402a1..a8fca56 100644 (file)
--- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -314,6 +314,36 @@
 
                clocks = <&cgu JZ4725B_CLK_LCD>;
                clock-names = "lcd_pclk";
+
+               lcd_ports: ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@8 {
+                               reg = <8>;
+
+                               ipu_output: endpoint {
+                                       remote-endpoint = <&ipu_input>;
+                               };
+                       };
+               };
+       };
+
+       ipu: ipu@13080000 {
+               compatible = "ingenic,jz4725b-ipu";
+               reg = <0x13080000 0x64>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <30>;
+
+               clocks = <&cgu JZ4725B_CLK_IPU>;
+               clock-names = "ipu";
+
+               port {
+                       ipu_input: endpoint {
+                               remote-endpoint = <&ipu_output>;
+                       };
+               };
        };
 
        bch: ecc-controller@130d0000 {

diff --git a/arch/mips/boot/dts/ingenic/rs90.dts b/arch/mips/boot/dts/ingenic/rs90.dts
index 246f97e..4eb1edb 100644 (file)
--- a/arch/mips/boot/dts/ingenic/rs90.dts
+++ b/arch/mips/boot/dts/ingenic/rs90.dts
@@ -302,8 +302,12 @@
 &lcd {
        pinctrl-names = "default";
        pinctrl-0 = <&pins_lcd>;
+};
+
+&lcd_ports {
+       port@0 {
+               reg = <0>;
 
-       port {
                panel_output: endpoint {
                        remote-endpoint = <&panel_input>;
                };