--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Clock Pulse Generator (CPG) generates core clocks for the SoC. It
+ includes PLLs, and fixed and variable ratio dividers.
+
+ The CPG may also provide a Clock Domain for SoC devices, in combination with
+ the CPG Module Stop (MSTP) Clocks.
+
+properties:
+ compatible:
+ oneOf:
+ - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
+ - const: renesas,r8a7740-cpg-clocks # R-Mobile A1
+ - const: renesas,r8a7778-cpg-clocks # R-Car M1
+ - const: renesas,r8a7779-cpg-clocks # R-Car H1
+ - items:
+ - enum:
+ - renesas,r7s72100-cpg-clocks # RZ/A1H
+ - const: renesas,rz-cpg-clocks # RZ/A1
+ - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
+
+ reg:
+ maxItems: 1
+
+ clocks: true
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names: true
+
+ renesas,mode:
+ description: Board-specific settings of the MD_CK* bits on R-Mobile A1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+
+ '#power-domain-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a73a4-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+
+ clock-output-names:
+ items:
+ - const: main
+ - const: pll0
+ - const: pll1
+ - const: pll2
+ - const: pll2s
+ - const: pll2h
+ - const: z
+ - const: z2
+ - const: i
+ - const: m3
+ - const: b
+ - const: m1
+ - const: m2
+ - const: zx
+ - const: zs
+ - const: hp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7740-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+ - description: extalr
+
+ clock-output-names:
+ items:
+ - const: system
+ - const: pllc0
+ - const: pllc1
+ - const: pllc2
+ - const: r
+ - const: usb24s
+ - const: i
+ - const: zg
+ - const: b
+ - const: m1
+ - const: hp
+ - const: hpp
+ - const: usbp
+ - const: s
+ - const: zb
+ - const: m3
+ - const: cp
+
+ required:
+ - renesas,mode
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7778-cpg-clocks
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ items:
+ - const: plla
+ - const: pllb
+ - const: b
+ - const: out
+ - const: p
+ - const: s
+ - const: s1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7779-cpg-clocks
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ items:
+ - const: plla
+ - const: z
+ - const: zs
+ - const: s
+ - const: s1
+ - const: p
+ - const: b
+ - const: out
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r7s72100-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: usb_x1
+
+ clock-output-names:
+ items:
+ - const: pll
+ - const: i
+ - const: g
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,sh73a0-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+
+ clock-output-names:
+ items:
+ - const: main
+ - const: pll0
+ - const: pll1
+ - const: pll2
+ - const: pll3
+ - const: dsi0phy
+ - const: dsi1phy
+ - const: zg
+ - const: m3
+ - const: b
+ - const: m1
+ - const: m2
+ - const: z
+ - const: zx
+ - const: hp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r8a7778-cpg-clocks
+ - renesas,r8a7779-cpg-clocks
+ - renesas,rz-cpg-clocks
+ then:
+ required:
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7740-cpg-clocks";
+ reg = <0xe6150000 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
+ "usb24s", "i", "zg", "b", "m1", "hp", "hpp",
+ "usbp", "s", "zb", "m3", "cp";
+ renesas,mode = <0x05>;
+ };
+++ /dev/null
-* Renesas R8A73A4 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
-and several fixed ratio dividers.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a73a4-cpg-clocks"
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
- - #clock-cells: Must be 1
-
- - clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
- "m1", "m2", "zx", "zs", and "hp".
-
-
-Example
--------
-
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a73a4-cpg-clocks";
- reg = <0 0xe6150000 0 0x10000>;
- clocks = <&extal1_clk>, <&extal2_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll2",
- "pll2s", "pll2h", "z", "z2",
- "i", "m3", "b", "m1", "m2",
- "zx", "zs", "hp";
- };
+++ /dev/null
-These bindings should be considered EXPERIMENTAL for now.
-
-* Renesas R8A7740 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
-and several fixed ratio and variable ratio dividers.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a7740-cpg-clocks"
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the three parent clocks
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are
- "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
- "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
-
- - renesas,mode: board-specific settings of the MD_CK* bits
-
-
-Example
--------
-
-cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7740-cpg-clocks";
- reg = <0xe6150000 0x10000>;
- clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
- #clock-cells = <1>;
- clock-output-names = "system", "pllc0", "pllc1",
- "pllc2", "r",
- "usb24s",
- "i", "zg", "b", "m1", "hp",
- "hpp", "usbp", "s", "zb", "m3",
- "cp";
-};
-
-&cpg_clocks {
- renesas,mode = <0x05>;
-};
+++ /dev/null
-* Renesas R8A7778 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a7778-cpg-clocks"
- - reg: Base address and length of the memory resource used by the CPG
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are
- "plla", "pllb", "b", "out", "p", "s", and "s1".
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@ffc80000 {
- compatible = "renesas,r8a7778-cpg-clocks";
- reg = <0xffc80000 0x80>;
- #clock-cells = <1>;
- clocks = <&extal_clk>;
- clock-output-names = "plla", "pllb", "b",
- "out", "p", "s", "s1";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- sdhi0: sd@ffe4c000 {
- compatible = "renesas,sdhi-r8a7778";
- reg = <0xffe4c000 0x100>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
- power-domains = <&cpg_clocks>;
- };
+++ /dev/null
-* Renesas R8A7779 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R8A7779. It includes one PLL and
-several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be "renesas,r8a7779-cpg-clocks"
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the parent clock
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are "plla",
- "z", "zs", "s", "s1", "p", "b", "out".
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@ffc80000 {
- compatible = "renesas,r8a7779-cpg-clocks";
- reg = <0xffc80000 0x30>;
- clocks = <&extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "plla", "z", "zs", "s", "s1", "p",
- "b", "out";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- sata: sata@fc600000 {
- compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
- reg = <0xfc600000 0x2000>;
- interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp1_clks R8A7779_CLK_SATA>;
- power-domains = <&cpg_clocks>;
- };
+++ /dev/null
-* Renesas RZ/A1 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable
-CPU and GPU clocks, and several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be one of
- - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
- and "renesas,rz-cpg-clocks" as a fallback.
- - reg: Base address and length of the memory resource used by the CPG
- - clocks: References to possible parent clocks. Order must match clock modes
- in the datasheet. For the r7s72100, this is extal, usb_x1.
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are "pll",
- "i", and "g"
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@fcfe0000 {
- #clock-cells = <1>;
- compatible = "renesas,r7s72100-cpg-clocks",
- "renesas,rz-cpg-clocks";
- reg = <0xfcfe0000 0x18>;
- clocks = <&extal_clk>, <&usb_x1_clk>;
- clock-output-names = "pll", "i", "g";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
- reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tgi0a";
- clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- };
+++ /dev/null
-These bindings should be considered EXPERIMENTAL for now.
-
-* Renesas SH73A0 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
-and several fixed ratio dividers.
-
-Required Properties:
-
- - compatible: Must be "renesas,sh73a0-cpg-clocks"
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
- - #clock-cells: Must be 1
-
- - clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
- "m1", "m2", "z", "zx", and "hp".
-
-
-Example
--------
-
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,sh73a0-cpg-clocks";
- reg = <0 0xe6150000 0 0x10000>;
- clocks = <&extal1_clk>, <&extal2_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0", "pll1", "pll2",
- "pll3", "dsi0phy", "dsi1phy",
- "zg", "m3", "b", "m1", "m2",
- "z", "zx", "hp";
- };
OSDN Git Service
