The function can_calc_tdco() directly retrieves can_priv from the
net_device and directly modifies it.
This is annoying for the upcoming patch. In
drivers/net/can/dev/netlink.c:can_changelink(), the data bittiming are
written to a temporary structure and memcpyed to can_priv only after
everything succeeded. In the next patch, where we will introduce the
netlink interface for TDC parameters, we will add a new TDC block
which can potentially fail. For this reason, the data bittiming
temporary structure has to be copied after that to-be-introduced TDC
block. However, TDC also needs to access data bittiming information.
We change the prototype so that the data bittiming structure is passed
to can_calc_tdco() as an argument instead of retrieving it from
priv. This way can_calc_tdco() can access the data bittiming before it
gets memcpyed to priv.
Link: https://lore.kernel.org/all/20210918095637.20108-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
return 0;
}
-void can_calc_tdco(struct net_device *dev)
-{
- struct can_priv *priv = netdev_priv(dev);
- const struct can_bittiming *dbt = &priv->data_bittiming;
- struct can_tdc *tdc = &priv->tdc;
- const struct can_tdc_const *tdc_const = priv->tdc_const;
+void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
+ const struct can_bittiming *dbt,
+ u32 *ctrlmode, u32 ctrlmode_supported)
- if (!tdc_const ||
- !(priv->ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO))
+{
+ if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO))
return;
- priv->ctrlmode &= ~CAN_CTRLMODE_TDC_MASK;
+ *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK;
/* As specified in ISO 11898-1 section 11.3.3 "Transmitter
* delay compensation" (TDC) is only applicable if data BRP is
if (sample_point_in_tc < tdc_const->tdco_min)
return;
tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max);
- priv->ctrlmode |= CAN_CTRLMODE_TDC_AUTO;
+ *ctrlmode |= CAN_CTRLMODE_TDC_AUTO;
}
}
#endif /* CONFIG_CAN_CALC_BITTIMING */
memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
- can_calc_tdco(dev);
+ can_calc_tdco(&priv->tdc, priv->tdc_const, &priv->data_bittiming,
+ &priv->ctrlmode, priv->ctrlmode_supported);
if (priv->do_set_data_bittiming) {
/* Finally, set the bit-timing registers */
int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
const struct can_bittiming_const *btc);
-void can_calc_tdco(struct net_device *dev);
+void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
+ const struct can_bittiming *dbt,
+ u32 *ctrlmode, u32 ctrlmode_supported);
#else /* !CONFIG_CAN_CALC_BITTIMING */
static inline int
can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
return -EINVAL;
}
-static inline void can_calc_tdco(struct net_device *dev)
+static inline void
+can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
+ const struct can_bittiming *dbt,
+ u32 *ctrlmode, u32 ctrlmode_supported)
{
}
#endif /* CONFIG_CAN_CALC_BITTIMING */