*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
-# Figure out what language subdirectories are present.
-# Look if the user specified --enable-languages="..."; if not, use
-# the environment variable $LANGUAGES if defined. $LANGUAGES might
-# go away some day.
-# NB: embedded tabs in this IF block -- do not untabify
-if test x"${enable_languages+set}" != xset; then
- if test x"${LANGUAGES+set}" = xset; then
- enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
- else
- enable_languages=all
- fi
-else
- if test x"${enable_languages}" = x ||
- test x"${enable_languages}" = xyes;
- then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
- exit 1
- fi
-fi
-enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
-
-# First scan to see if an enabled language requires some other language.
-# We assume that a given config-lang.in will list all the language
-# front ends it requires, even if some are required indirectly.
-for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
- case ${lang_frag} in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[[*]]/config-lang.in) ;;
- *)
- # From the config-lang.in, get $language, $lang_requires
- language=
- lang_requires=
- . ${lang_frag}
- for other in ${lang_requires} ; do
- case ,${enable_languages}, in
- *,$other,*) ;;
- *,all,*) ;;
- *,$language,*)
- echo " \`$other' language required by \`$language'; enabling" 1>&2
- enable_languages="${enable_languages},${other}"
- ;;
- esac
- done
- ;;
- esac
-done
-
-for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
- case ${lang_frag} in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[[*]]/config-lang.in) ;;
- *)
- # From the config-lang.in, get $language, $target_libs,
- # $lang_dirs, and $build_by_default
- language=
- target_libs=
- lang_dirs=
- build_by_default=
- . ${lang_frag}
- if test "x$language" = x ; then
- echo "${lang_frag} doesn't set \$language." 1>&2
- exit 1
- fi
- case ,${enable_languages}, in
- *,${language},*)
- # Language was explicitly selected; include it.
- add_this_lang=yes
- ;;
- *,all,*)
- # 'all' was selected; include 'default' languages.
- case ${build_by_default} in
- no) add_this_lang=no ;;
- *) add_this_lang=yes ;;
- esac
- ;;
- *) add_this_lang=no ;;
- esac
- case ${add_this_lang} in
- no)
- # Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
- ;;
- esac
- ;;
- esac
-done
-
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
-# If we have the source for $noconfigdirs entries, add them to $notsupp.
-
-notsupp=""
-for dir in . $skipdirs $noconfigdirs ; do
- dirname=`echo $dir | sed -e s/target-//g`
- if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
- fi
- if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
- fi
-done
-
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-if test -n "${target_configdirs}" ; then
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure ; then
- others=yes;
- break;
- fi
- fi
- done
- if test -z "${others}" ; then
- target_configdirs=
- fi
-fi
-
-# Quietly strip out all directories which aren't configurable in this tree.
-# This relies on all configurable subdirectories being autoconfiscated, which
-# is now the case.
-configdirs_all="$configdirs"
-configdirs=
-for i in ${configdirs_all} ; do
- if test -f ${srcdir}/$i/configure ; then
- configdirs="${configdirs} $i"
- fi
-done
-target_configdirs_all="$target_configdirs"
-target_configdirs=
-for i in ${target_configdirs_all} ; do
- j=`echo $i | sed -e s/target-//g`
- if test -f ${srcdir}/$j/configure ; then
- target_configdirs="${target_configdirs} $i"
- fi
-done
-
-# Produce a warning message for the subdirs we can't configure.
-# This isn't especially interesting in the Cygnus tree, but in the individual
-# FSF releases, it's important to let people know when their machine isn't
-# supported by the one or two programs in a package.
-
-if test -n "${notsupp}" && test -z "${norecursion}" ; then
- # If $appdirs is non-empty, at least one of those directories must still
- # be configured, or we error out. (E.g., if the gas release supports a
- # specified target in some subdirs but not the gas subdir, we shouldn't
- # pretend that all is well.)
- if test -n "$appdirs" ; then
- for dir in $appdirs ; do
- if test -r $dir/Makefile.in ; then
- if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- fi
- done
- if test -n "$appdirs" ; then
- echo "*** This configuration is not supported by this package." 1>&2
- exit 1
- fi
- fi
- # Okay, some application will build, or we don't care to check. Still
- # notify of subdirs not getting built.
- echo "*** This configuration is not supported in the following subdirectories:" 1>&2
- echo " ${notsupp}" 1>&2
- echo " (Any other directories should still work fine.)" 1>&2
-fi
-
-case "$host" in
- *msdosdjgpp*)
- enable_gdbtk=no ;;
-esac
-
-copy_dirs=
-
-# Handle --with-headers=XXX. If the value is not "yes", the contents of
-# the named directory are copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-headers is only supported when cross compiling
- exit 1
- fi
- if test x"${with_headers}" != xyes ; then
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
- fi
-fi
-
-# Handle --with-libs=XXX. If the value is not "yes", the contents of
-# the name directories are copied to $(tooldir)/lib. Multiple directories
-# are permitted.
-if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-libs is only supported when cross compiling
- exit 1
- fi
- if test x"${with_libs}" != xyes ; then
- # Copy the libraries in reverse order, so that files in the first named
- # library override files in subsequent libraries.
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- for l in ${with_libs}; do
- copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
- done
- fi
-fi
-
-# Handle ${copy_dirs}
-set fnord ${copy_dirs}
-shift
-while test $# != 0 ; do
- if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
- :
- else
- echo Copying $1 to $2
-
- # Use the install script to create the directory and all required
- # parent directories.
- if test -d $2 ; then
- :
- else
- echo >config.temp
- ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
- fi
-
- # Copy the directory, assuming we have tar.
- # FIXME: Should we use B in the second tar? Not all systems support it.
- (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
-
- # It is the responsibility of the user to correctly adjust all
- # symlinks. If somebody can figure out how to handle them correctly
- # here, feel free to add the code.
-
- echo $1 > $2/COPIED
- fi
- shift; shift
-done
-
# Work in distributions that contain no compiler tools, like Autoconf.
tentative_cc=""
host_makefile_frag=/dev/null
esac
fi
+# If we aren't going to be using gcc, see if we can extract a definition
+# of CC from the fragment.
+# Actually, use the 'pre-extracted' version above.
+if test -z "${CC}" && test "${build}" = "${host}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ found=
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ found=yes
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${found}" && test -n "${tentative_cc}" ; then
+ CC=$tentative_cc
+ fi
+fi
+
+if test "${build}" != "${host}" ; then
+ # If we are doing a Canadian Cross, in which the host and build systems
+ # are not the same, we set reasonable default values for the tools.
+
+ BISON=${BISON-bison}
+ CC=${CC-${host_alias}-gcc}
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXX=${CXX-${host_alias}-c++}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
+ CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
+ GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
+ GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
+ BUILD_PREFIX=${build_alias}-
+ BUILD_PREFIX_1=${build_alias}-
+ MAKEINFO=${MAKEINFO-makeinfo}
+
+ if test -z "${YACC}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/bison; then
+ YACC="bison -y"
+ break
+ fi
+ if test -f $dir/byacc; then
+ YACC=byacc
+ break
+ fi
+ if test -f $dir/yacc; then
+ YACC=yacc
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${YACC}" ; then
+ YACC="bison -y"
+ fi
+ fi
+
+ if test -z "${LEX}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/flex; then
+ LEX=flex
+ break
+ fi
+ if test -f $dir/lex; then
+ LEX=lex
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ LEX=${LEX-flex}
+ fi
+
+else
+ # Set reasonable default values for some tools even if not Canadian.
+ # Of course, these are different reasonable default values, originally
+ # specified directly in the Makefile.
+ # We don't export, so that autoconf can do its job.
+ # Note that all these settings are above the fragment inclusion point
+ # in Makefile.in, so can still be overridden by fragments.
+ # This is all going to change when we autoconfiscate...
+
+ BISON="\$(USUAL_BISON)"
+ CC_FOR_BUILD="\$(CC)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ BUILD_PREFIX=
+ BUILD_PREFIX_1=loser-
+ MAKEINFO="\$(USUAL_MAKEINFO)"
+ LEX="\$(USUAL_LEX)"
+ YACC="\$(USUAL_YACC)"
+
+ # If CC is still not set, try to get gcc.
+ cc_prog_is_gcc=
+ if test -z "${CC}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ CC="gcc"
+ cc_prog_is_gcc=yes
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ CC=${CC-cc}
+ else
+ # Determine if we are using gcc.
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+ if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
+ cc_prog_is_gcc=yes
+ fi
+ rm -f conftest.c
+ if test -z "${CFLAGS}"; then
+ # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
+ # is set to a version of gcc.
+ if test "$cc_prog_is_gcc" = yes; then
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ fi
+ fi
+ fi
+
+ # We must set the default linker to the linker used by gcc for the correct
+ # operation of libtool. If LD is not defined and we are using gcc, try to
+ # set the LD default to the ld used by gcc.
+ if test -z "$LD"; then
+ if test "$cc_prog_is_gcc" = yes; then
+ case $build in
+ *-*-mingw*)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+ *)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+ esac
+ case $gcc_prog_ld in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ LD="$gcc_prog_ld" ;;
+ esac
+ fi
+ fi
+
+ CXX=${CXX-"c++"}
+ CFLAGS=${CFLAGS-"-g"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+
+ACX_PROG_GNAT
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test -d ${srcdir}/gcc; then
+ if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+ else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+ fi
+ enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
+
+ # First scan to see if an enabled language requires some other language.
+ # We assume that a given config-lang.in will list all the language
+ # front ends it requires, even if some are required indirectly.
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[[*]]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $lang_requires
+ language=
+ lang_requires=
+ . ${lang_frag}
+ for other in ${lang_requires} ; do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$language,*)
+ echo " \`$other' language required by \`$language'; enabling" 1>&2
+ enable_languages="${enable_languages},${other}"
+ ;;
+ esac
+ done
+ ;;
+ esac
+ done
+
+ new_enable_languages=c
+ missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[[*]]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $target_libs,
+ # $lang_dirs, and $build_by_default
+ language=
+ target_libs=
+ lang_dirs=
+ build_by_default=
+ . ${lang_frag}
+ # This is quite sensitive to the ordering of the case statement arms.
+ case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
+ *::*:*)
+ echo "${lang_frag} doesn't set \$language." 1>&2
+ exit 1
+ ;;
+ *:ada:no:*)
+ # Ada was requested with no preexisting GNAT. Disable unconditionally.
+ add_this_lang=no
+ ;;
+ *,${language},*:*:*:*)
+ # Language was explicitly selected; include it.
+ add_this_lang=yes
+ ;;
+ *,all,*:*:*:no)
+ # 'all' was selected, but this is not a default language
+ # so do not include it.
+ add_this_lang=no
+ ;;
+ *,all,*:*:*:*)
+ # 'all' was selected and this is a default language; include it.
+ add_this_lang=yes
+ ;;
+ *)
+ add_this_lang=no
+ ;;
+ esac
+ case $add_this_lang in
+ no)
+ # Remove language-dependent dirs.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" ;;
+ *)
+ new_enable_languages="$new_enable_languages,$language"
+ missing_languages="`echo "$missing_languages" | sed "s/,$language,/,/"`" ;;
+ esac
+ ;;
+ esac
+ done
+
+ missing_languages="`echo "$missing_languages" | sed -e s/^,// -e s/,$//`"
+ if test "x$missing_languages" != x; then
+ AC_MSG_ERROR([
+The following requested languages were not found: ${missing_languages}])
+ fi
+
+ if test "x$new_enable_languages" != "x$enable_languages"; then
+ echo The following languages will be built: ${new_enable_languages}
+ fi
+ enable_languages="$new_enable_languages"
+ ac_configure_args="`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `"
+fi
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+if test -n "${target_configdirs}" ; then
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure ; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if test -z "${others}" ; then
+ target_configdirs=
+ fi
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+
+copy_dirs=
+
+# Handle --with-headers=XXX. If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_headers}" != xyes ; then
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+ fi
+fi
+
+# Handle --with-libs=XXX. If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib. Multiple directories
+# are permitted.
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_libs}" != xyes ; then
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+ done
+ fi
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
;;
esac
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_alias}
test -n "$DEFAULT_LEX" && break
done
-if test "${build}" != "${host}" ; then
- # If we are doing a Canadian Cross, in which the host and build systems
- # are not the same, we set reasonable default values for the tools.
-
- BISON=${BISON-bison}
- CC=${CC-${host_alias}-gcc}
- CFLAGS=${CFLAGS-"-g -O2"}
- CXX=${CXX-${host_alias}-c++}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
- BUILD_PREFIX=${build_alias}-
- BUILD_PREFIX_1=${build_alias}-
- MAKEINFO=${MAKEINFO-makeinfo}
-
- if test -z "${YACC}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/bison; then
- YACC="bison -y"
- break
- fi
- if test -f $dir/byacc; then
- YACC=byacc
- break
- fi
- if test -f $dir/yacc; then
- YACC=yacc
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${YACC}" ; then
- YACC="bison -y"
- fi
- fi
-
- if test -z "${LEX}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/flex; then
- LEX=flex
- break
- fi
- if test -f $dir/lex; then
- LEX=lex
- break
- fi
- done
- IFS="$save_ifs"
- LEX=${LEX-flex}
- fi
-
-else
- # Set reasonable default values for some tools even if not Canadian.
- # Of course, these are different reasonable default values, originally
- # specified directly in the Makefile.
- # We don't export, so that autoconf can do its job.
- # Note that all these settings are above the fragment inclusion point
- # in Makefile.in, so can still be overridden by fragments.
- # This is all going to change when we autoconfiscate...
-
- BISON="\$(USUAL_BISON)"
- CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
- BUILD_PREFIX=
- BUILD_PREFIX_1=loser-
- MAKEINFO="\$(USUAL_MAKEINFO)"
- LEX="\$(USUAL_LEX)"
- YACC="\$(USUAL_YACC)"
-
- # If CC is still not set, try to get gcc.
- cc_prog_is_gcc=
- if test -z "${CC}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- CC="gcc"
- cc_prog_is_gcc=yes
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- break
- fi
- done
- IFS="$save_ifs"
- CC=${CC-cc}
- else
- # Determine if we are using gcc.
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
- if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
- cc_prog_is_gcc=yes
- fi
- rm -f conftest.c
- if test -z "${CFLAGS}"; then
- # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
- # is set to a version of gcc.
- if test "$cc_prog_is_gcc" = yes; then
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- fi
- fi
- fi
-
- # We must set the default linker to the linker used by gcc for the correct
- # operation of libtool. If LD is not defined and we are using gcc, try to
- # set the LD default to the ld used by gcc.
- if test -z "$LD"; then
- if test "$cc_prog_is_gcc" = yes; then
- case $build in
- *-*-mingw*)
- gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
- *)
- gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
- esac
- case $gcc_prog_ld in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- LD="$gcc_prog_ld" ;;
- esac
- fi
- fi
-
- CXX=${CXX-"c++"}
- CFLAGS=${CFLAGS-"-g"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
-fi
-
# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
# Set up the list of links to be made.
# ${links} is the list of link names, and ${files} is the list of names to link to.