#define BXT_PHY_CTL_FAMILY(phy) _BXT_PHY((phy), _PHY_CTL_FAMILY_DDI, \
_PHY_CTL_FAMILY_EDP)
+/* BXT PHY PLL registers */
+#define _PORT_PLL_A 0x46074
+#define _PORT_PLL_B 0x46078
+#define _PORT_PLL_C 0x4607c
+#define PORT_PLL_ENABLE (1 << 31)
+#define PORT_PLL_LOCK (1 << 30)
+#define PORT_PLL_REF_SEL (1 << 27)
+#define BXT_PORT_PLL_ENABLE(port) _PORT(port, _PORT_PLL_A, _PORT_PLL_B)
+
+#define _PORT_PLL_EBB_0_A 0x162034
+#define _PORT_PLL_EBB_0_B 0x6C034
+#define _PORT_PLL_EBB_0_C 0x6C340
+#define PORT_PLL_P1_MASK (0x07 << 13)
+#define PORT_PLL_P1(x) ((x) << 13)
+#define PORT_PLL_P2_MASK (0x1f << 8)
+#define PORT_PLL_P2(x) ((x) << 8)
+#define BXT_PORT_PLL_EBB_0(port) _PORT3(port, _PORT_PLL_EBB_0_A, \
+ _PORT_PLL_EBB_0_B, \
+ _PORT_PLL_EBB_0_C)
+
+#define _PORT_PLL_EBB_4_A 0x162038
+#define _PORT_PLL_EBB_4_B 0x6C038
+#define _PORT_PLL_EBB_4_C 0x6C344
+#define PORT_PLL_10BIT_CLK_ENABLE (1 << 13)
+#define PORT_PLL_RECALIBRATE (1 << 14)
+#define BXT_PORT_PLL_EBB_4(port) _PORT3(port, _PORT_PLL_EBB_4_A, \
+ _PORT_PLL_EBB_4_B, \
+ _PORT_PLL_EBB_4_C)
+
+#define _PORT_PLL_0_A 0x162100
+#define _PORT_PLL_0_B 0x6C100
+#define _PORT_PLL_0_C 0x6C380
+/* PORT_PLL_0_A */
+#define PORT_PLL_M2_MASK 0xFF
+/* PORT_PLL_1_A */
+#define PORT_PLL_N_MASK (0x0F << 8)
+#define PORT_PLL_N(x) ((x) << 8)
+/* PORT_PLL_2_A */
+#define PORT_PLL_M2_FRAC_MASK 0x3FFFFF
+/* PORT_PLL_3_A */
+#define PORT_PLL_M2_FRAC_ENABLE (1 << 16)
+/* PORT_PLL_6_A */
+#define PORT_PLL_PROP_COEFF_MASK 0xF
+#define PORT_PLL_INT_COEFF_MASK (0x1F << 8)
+#define PORT_PLL_INT_COEFF(x) ((x) << 8)
+#define PORT_PLL_GAIN_CTL_MASK (0x07 << 16)
+#define PORT_PLL_GAIN_CTL(x) ((x) << 16)
+/* PORT_PLL_8_A */
+#define PORT_PLL_TARGET_CNT_MASK 0x3FF
+#define _PORT_PLL_BASE(port) _PORT3(port, _PORT_PLL_0_A, \
+ _PORT_PLL_0_B, \
+ _PORT_PLL_0_C)
+#define BXT_PORT_PLL(port, idx) (_PORT_PLL_BASE(port) + (idx) * 4)
+
/* BXT PHY common lane registers */
#define _PORT_CL1CM_DW0_A 0x162000
#define _PORT_CL1CM_DW0_BC 0x6C000
#define BXT_PORT_REF_DW8(phy) _BXT_PHY((phy), _PORT_REF_DW8_BC, \
_PORT_REF_DW8_A)
+/* BXT PHY PCS registers */
+#define _PORT_PCS_DW12_LN01_A 0x162430
+#define _PORT_PCS_DW12_LN01_B 0x6C430
+#define _PORT_PCS_DW12_LN01_C 0x6C830
+#define _PORT_PCS_DW12_LN23_A 0x162630
+#define _PORT_PCS_DW12_LN23_B 0x6C630
+#define _PORT_PCS_DW12_LN23_C 0x6CA30
+#define _PORT_PCS_DW12_GRP_A 0x162c30
+#define _PORT_PCS_DW12_GRP_B 0x6CC30
+#define _PORT_PCS_DW12_GRP_C 0x6CE30
+#define LANESTAGGER_STRAP_OVRD (1 << 6)
+#define LANE_STAGGER_MASK 0x1F
+#define BXT_PORT_PCS_DW12_LN01(port) _PORT3(port, _PORT_PCS_DW12_LN01_A, \
+ _PORT_PCS_DW12_LN01_B, \
+ _PORT_PCS_DW12_LN01_C)
+#define BXT_PORT_PCS_DW12_LN23(port) _PORT3(port, _PORT_PCS_DW12_LN23_A, \
+ _PORT_PCS_DW12_LN23_B, \
+ _PORT_PCS_DW12_LN23_C)
+#define BXT_PORT_PCS_DW12_GRP(port) _PORT3(port, _PORT_PCS_DW12_GRP_A, \
+ _PORT_PCS_DW12_GRP_B, \
+ _PORT_PCS_DW12_GRP_C)
+
/* BXT PHY TX registers */
#define _BXT_LANE_OFFSET(lane) (((lane) >> 1) * 0x200 + \
((lane) & 1) * 0x80)
I915_WRITE(BXT_P_CR_GT_DISP_PWRON, 0);
}
+static const char * const bxt_ddi_pll_names[] = {
+ "PORT PLL A",
+ "PORT PLL B",
+ "PORT PLL C",
+};
+
+static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ uint32_t temp;
+ enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */
+
+ temp = I915_READ(BXT_PORT_PLL_ENABLE(port));
+ temp &= ~PORT_PLL_REF_SEL;
+ /* Non-SSC reference */
+ I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp);
+
+ /* Disable 10 bit clock */
+ temp = I915_READ(BXT_PORT_PLL_EBB_4(port));
+ temp &= ~PORT_PLL_10BIT_CLK_ENABLE;
+ I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
+
+ /* Write P1 & P2 */
+ temp = I915_READ(BXT_PORT_PLL_EBB_0(port));
+ temp &= ~(PORT_PLL_P1_MASK | PORT_PLL_P2_MASK);
+ temp |= pll->config.hw_state.ebb0;
+ I915_WRITE(BXT_PORT_PLL_EBB_0(port), temp);
+
+ /* Write M2 integer */
+ temp = I915_READ(BXT_PORT_PLL(port, 0));
+ temp &= ~PORT_PLL_M2_MASK;
+ temp |= pll->config.hw_state.pll0;
+ I915_WRITE(BXT_PORT_PLL(port, 0), temp);
+
+ /* Write N */
+ temp = I915_READ(BXT_PORT_PLL(port, 1));
+ temp &= ~PORT_PLL_N_MASK;
+ temp |= pll->config.hw_state.pll1;
+ I915_WRITE(BXT_PORT_PLL(port, 1), temp);
+
+ /* Write M2 fraction */
+ temp = I915_READ(BXT_PORT_PLL(port, 2));
+ temp &= ~PORT_PLL_M2_FRAC_MASK;
+ temp |= pll->config.hw_state.pll2;
+ I915_WRITE(BXT_PORT_PLL(port, 2), temp);
+
+ /* Write M2 fraction enable */
+ temp = I915_READ(BXT_PORT_PLL(port, 3));
+ temp &= ~PORT_PLL_M2_FRAC_ENABLE;
+ temp |= pll->config.hw_state.pll3;
+ I915_WRITE(BXT_PORT_PLL(port, 3), temp);
+
+ /* Write coeff */
+ temp = I915_READ(BXT_PORT_PLL(port, 6));
+ temp &= ~PORT_PLL_PROP_COEFF_MASK;
+ temp &= ~PORT_PLL_INT_COEFF_MASK;
+ temp &= ~PORT_PLL_GAIN_CTL_MASK;
+ temp |= pll->config.hw_state.pll6;
+ I915_WRITE(BXT_PORT_PLL(port, 6), temp);
+
+ /* Write calibration val */
+ temp = I915_READ(BXT_PORT_PLL(port, 8));
+ temp &= ~PORT_PLL_TARGET_CNT_MASK;
+ temp |= pll->config.hw_state.pll8;
+ I915_WRITE(BXT_PORT_PLL(port, 8), temp);
+
+ /*
+ * FIXME: program PORT_PLL_9/i_lockthresh according to the latest
+ * specification update.
+ */
+
+ /* Recalibrate with new settings */
+ temp = I915_READ(BXT_PORT_PLL_EBB_4(port));
+ temp |= PORT_PLL_RECALIBRATE;
+ I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
+ /* Enable 10 bit clock */
+ temp |= PORT_PLL_10BIT_CLK_ENABLE;
+ I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp);
+
+ /* Enable PLL */
+ temp = I915_READ(BXT_PORT_PLL_ENABLE(port));
+ temp |= PORT_PLL_ENABLE;
+ I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp);
+ POSTING_READ(BXT_PORT_PLL_ENABLE(port));
+
+ if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) &
+ PORT_PLL_LOCK), 200))
+ DRM_ERROR("PLL %d not locked\n", port);
+
+ /*
+ * While we write to the group register to program all lanes at once we
+ * can read only lane registers and we pick lanes 0/1 for that.
+ */
+ temp = I915_READ(BXT_PORT_PCS_DW12_LN01(port));
+ temp &= ~LANE_STAGGER_MASK;
+ temp &= ~LANESTAGGER_STRAP_OVRD;
+ temp |= pll->config.hw_state.pcsdw12;
+ I915_WRITE(BXT_PORT_PCS_DW12_GRP(port), temp);
+}
+
+static void bxt_ddi_pll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */
+ uint32_t temp;
+
+ temp = I915_READ(BXT_PORT_PLL_ENABLE(port));
+ temp &= ~PORT_PLL_ENABLE;
+ I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp);
+ POSTING_READ(BXT_PORT_PLL_ENABLE(port));
+}
+
+static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ struct intel_dpll_hw_state *hw_state)
+{
+ enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */
+ uint32_t val;
+
+ if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
+ return false;
+
+ val = I915_READ(BXT_PORT_PLL_ENABLE(port));
+ if (!(val & PORT_PLL_ENABLE))
+ return false;
+
+ hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port));
+ hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0));
+ hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1));
+ hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2));
+ hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3));
+ hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6));
+ hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
+ /*
+ * While we write to the group register to program all lanes at once we
+ * can read only lane registers. We configure all lanes the same way, so
+ * here just read out lanes 0/1 and output a note if lanes 2/3 differ.
+ */
+ hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(port));
+ if (I915_READ(BXT_PORT_PCS_DW12_LN23(port) != hw_state->pcsdw12))
+ DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n",
+ hw_state->pcsdw12,
+ I915_READ(BXT_PORT_PCS_DW12_LN23(port)));
+
+ return true;
+}
+
+static void bxt_shared_dplls_init(struct drm_i915_private *dev_priv)
+{
+ int i;
+
+ dev_priv->num_shared_dpll = 3;
+
+ for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ dev_priv->shared_dplls[i].id = i;
+ dev_priv->shared_dplls[i].name = bxt_ddi_pll_names[i];
+ dev_priv->shared_dplls[i].disable = bxt_ddi_pll_disable;
+ dev_priv->shared_dplls[i].enable = bxt_ddi_pll_enable;
+ dev_priv->shared_dplls[i].get_hw_state =
+ bxt_ddi_pll_get_hw_state;
+ }
+}
+
void intel_ddi_pll_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_SKYLAKE(dev))
skl_shared_dplls_init(dev_priv);
+ else if (IS_BROXTON(dev))
+ bxt_shared_dplls_init(dev_priv);
else
hsw_shared_dplls_init(dev_priv);
OSDN Git Service
