docs: add IRQ documentation at the core-api book

There are 4 IRQ documentation files under Documentation/*.txt.

Move them into a new directory (core-api/irq) and add a new
index file for it.

While here, use a title markup for the Debugging section of the
irq-domain.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2da7485c3718e1442e6b4c2dd66857b776e8899b.1588345503.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst
index f83212f..3eeeb48 100644 (file)
--- a/Documentation/admin-guide/hw-vuln/l1tf.rst
+++ b/Documentation/admin-guide/hw-vuln/l1tf.rst
@@ -268,7 +268,7 @@ Guest mitigation mechanisms
    /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is
    available at:
 
-   https://www.kernel.org/doc/Documentation/IRQ-affinity.txt
+   https://www.kernel.org/doc/Documentation/core-api/irq/irq-affinity.rst
 
 .. _smt_control:
 

diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 21818ac..dc36aeb 100644 (file)
--- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -10,7 +10,7 @@ them to a "housekeeping" CPU dedicated to such work.
 References
 ==========
 
--      Documentation/IRQ-affinity.txt:  Binding interrupts to sets of CPUs.
+-      Documentation/core-api/irq/irq-affinity.rst:  Binding interrupts to sets of CPUs.
 
 -      Documentation/admin-guide/cgroup-v1:  Using cgroups to bind tasks to sets of CPUs.
 

diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 2cfd07a..0caaed5 100644 (file)
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -52,6 +52,7 @@ How Linux keeps everything from happening at the same time.  See
 
    atomic_ops
    refcount-vs-atomic
+   irq/index
    local_ops
    padata
    ../RCU/index

diff --git a/Documentation/IRQ.txt b/Documentation/core-api/irq/concepts.rst
similarity index 100%
rename from Documentation/IRQ.txt
rename to Documentation/core-api/irq/concepts.rst

diff --git a/Documentation/core-api/irq/index.rst b/Documentation/core-api/irq/index.rst
new file mode 100644 (file)
index 0000000..0d65d11
--- /dev/null
+++ b/Documentation/core-api/irq/index.rst
@@ -0,0 +1,11 @@
+====
+IRQs
+====
+
+.. toctree::
+   :maxdepth: 1
+
+   concepts
+   irq-affinity
+   irq-domain
+   irqflags-tracing

diff --git a/Documentation/IRQ-affinity.txt b/Documentation/core-api/irq/irq-affinity.rst
similarity index 100%
rename from Documentation/IRQ-affinity.txt
rename to Documentation/core-api/irq/irq-affinity.rst

diff --git a/Documentation/IRQ-domain.txt b/Documentation/core-api/irq/irq-domain.rst
similarity index 99%
rename from Documentation/IRQ-domain.txt
rename to Documentation/core-api/irq/irq-domain.rst
index 507775c..096db12 100644 (file)
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/core-api/irq/irq-domain.rst
@@ -263,7 +263,8 @@ needs to:
 Hierarchy irq_domain is in no way x86 specific, and is heavily used to
 support other architectures, such as ARM, ARM64 etc.
 
-=== Debugging ===
+Debugging
+=========
 
 Most of the internals of the IRQ subsystem are exposed in debugfs by
 turning CONFIG_GENERIC_IRQ_DEBUGFS on.

diff --git a/Documentation/irqflags-tracing.txt b/Documentation/core-api/irq/irqflags-tracing.rst
similarity index 100%
rename from Documentation/irqflags-tracing.txt
rename to Documentation/core-api/irq/irqflags-tracing.rst

diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/ia64/irq-redir.rst
index 39bf944..6bbbbe4 100644 (file)
--- a/Documentation/ia64/irq-redir.rst
+++ b/Documentation/ia64/irq-redir.rst
@@ -7,7 +7,7 @@ IRQ affinity on IA64 platforms
 
 By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
 controlled. The behavior on IA64 platforms is slightly different from
-that described in Documentation/IRQ-affinity.txt for i386 systems.
+that described in Documentation/core-api/irq/irq-affinity.rst for i386 systems.
 
 Because of the usage of SAPIC mode and physical destination mode the
 IRQ target is one particular CPU and cannot be a mask of several

diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst
index f78d7bf..8f0347b 100644 (file)
--- a/Documentation/networking/scaling.rst
+++ b/Documentation/networking/scaling.rst
@@ -81,7 +81,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
 an IRQ may be handled on any CPU. Because a non-negligible part of packet
 processing takes place in receive interrupt handling, it is advantageous
 to spread receive interrupts between CPUs. To manually adjust the IRQ
-affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems
+affinity of each interrupt see Documentation/core-api/irq/irq-affinity.rst. Some systems
 will be running irqbalance, a daemon that dynamically optimizes IRQ
 assignments and as a result may override any manual settings.
 
@@ -160,7 +160,7 @@ can be configured for each receive queue using a sysfs file entry::
 
 This file implements a bitmap of CPUs. RPS is disabled when it is zero
 (the default), in which case packets are processed on the interrupting
-CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to
+CPU. Documentation/core-api/irq/irq-affinity.rst explains how CPUs are assigned to
 the bitmap.
 
 

diff --git a/Documentation/translations/zh_CN/IRQ.txt b/Documentation/translations/zh_CN/IRQ.txt
index 956026d..9aec8dc 100644 (file)
--- a/Documentation/translations/zh_CN/IRQ.txt
+++ b/Documentation/translations/zh_CN/IRQ.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/IRQ.txt
+Chinese translated version of Documentation/core-api/irq/index.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
 Maintainer: Eric W. Biederman <ebiederman@xmission.com>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/IRQ.txt 的中文翻译
+Documentation/core-api/irq/index.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻

diff --git a/MAINTAINERS b/MAINTAINERS
index e4d2e2f..3e4b174 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8952,7 +8952,7 @@ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:     Marc Zyngier <maz@kernel.org>
 S:     Maintained
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
-F:     Documentation/IRQ-domain.txt
+F:     Documentation/core-api/irq/irq-domain.rst
 F:     include/linux/irqdomain.h
 F:     kernel/irq/irqdomain.c
 F:     kernel/irq/msi.c