OSDN Git Service

drm/amd/display: update dce_calcs to latest version
authorDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Mon, 26 Feb 2018 19:37:25 +0000 (14:37 -0500)
committerAlex Deucher <alexander.deucher@amd.com>
Wed, 14 Mar 2018 20:16:35 +0000 (15:16 -0500)
Bw spreadsheet was updated while dce_calcs was not

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
drivers/gpu/drm/amd/display/dc/inc/dce_calcs.h

index 6d38b8f..0cbab81 100644 (file)
@@ -85,7 +85,6 @@ static void calculate_bandwidth(
        const uint32_t s_mid5 = 5;
        const uint32_t s_mid6 = 6;
        const uint32_t s_high = 7;
-       const uint32_t bus_efficiency = 1;
        const uint32_t dmif_chunk_buff_margin = 1;
 
        uint32_t max_chunks_fbc_mode;
@@ -592,7 +591,12 @@ static void calculate_bandwidth(
        /* 1 = use channel 0 and 1*/
        /* 2 = use channel 0,1,2,3*/
        if ((fbc_enabled == 1 && lpt_enabled == 1)) {
-               data->dram_efficiency = bw_int_to_fixed(1);
+               if (vbios->memory_type == bw_def_hbm)
+                       data->dram_efficiency = bw_frc_to_fixed(5, 10);
+               else
+                       data->dram_efficiency = bw_int_to_fixed(1);
+
+
                if (dceip->low_power_tiling_mode == 0) {
                        data->number_of_dram_channels = 1;
                }
@@ -607,7 +611,10 @@ static void calculate_bandwidth(
                }
        }
        else {
-               data->dram_efficiency = bw_frc_to_fixed(8, 10);
+               if (vbios->memory_type == bw_def_hbm)
+                       data->dram_efficiency = bw_frc_to_fixed(5, 10);
+               else
+                       data->dram_efficiency = bw_frc_to_fixed(8, 10);
        }
        /*memory request size and latency hiding:*/
        /*request size is normally 64 byte, 2-line interleaved, with full latency hiding*/
@@ -1171,9 +1178,9 @@ static void calculate_bandwidth(
        }
        for (i = 0; i <= 2; i++) {
                for (j = 0; j <= 7; j++) {
-                       data->dmif_burst_time[i][j] = bw_max3(data->dmif_total_page_close_open_time, bw_div(data->total_display_reads_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))), bw_div(data->total_display_reads_required_data, (bw_mul(bw_mul(sclk[j], vbios->data_return_bus_width), bw_int_to_fixed(bus_efficiency)))));
+                       data->dmif_burst_time[i][j] = bw_max3(data->dmif_total_page_close_open_time, bw_div(data->total_display_reads_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))), bw_div(data->total_display_reads_required_data, (bw_mul(bw_mul(sclk[j], vbios->data_return_bus_width), bw_frc_to_fixed(dceip->percent_of_ideal_port_bw_received_after_urgent_latency, 100)))));
                        if (data->d1_display_write_back_dwb_enable == 1) {
-                               data->mcifwr_burst_time[i][j] = bw_max3(data->mcifwr_total_page_close_open_time, bw_div(data->total_display_writes_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_wrchannels)))), bw_div(data->total_display_writes_required_data, (bw_mul(bw_mul(sclk[j], vbios->data_return_bus_width), bw_int_to_fixed(bus_efficiency)))));
+                               data->mcifwr_burst_time[i][j] = bw_max3(data->mcifwr_total_page_close_open_time, bw_div(data->total_display_writes_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_wrchannels)))), bw_div(data->total_display_writes_required_data, (bw_mul(sclk[j], vbios->data_return_bus_width))));
                        }
                }
        }
@@ -1258,6 +1265,16 @@ static void calculate_bandwidth(
        /*                  / (dispclk - display bw)*/
        /*the minimum latency hiding is the minimum for all pipes of one screen line time, plus one more line time if doing lb prefetch, plus the dmif data buffer size equivalent in time, minus the urgent latency.*/
        /*the minimum latency hiding is  further limited by the cursor.  the cursor latency hiding is the number of lines of the cursor buffer, minus one if the downscaling is less than two, or minus three if it is more*/
+
+       /*initialize variables*/
+       number_of_displays_enabled = 0;
+       number_of_displays_enabled_with_margin = 0;
+       for (k = 0; k <= maximum_number_of_surfaces - 1; k++) {
+               if (data->enable[k]) {
+                       number_of_displays_enabled = number_of_displays_enabled + 1;
+               }
+               data->display_pstate_change_enable[k] = 0;
+       }
        for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
                if (data->enable[i]) {
                        if ((bw_equ(dceip->stutter_and_dram_clock_state_change_gated_before_cursor, bw_int_to_fixed(0)) && bw_mtn(data->cursor_width_pixels[i], bw_int_to_fixed(0)))) {
@@ -1276,7 +1293,10 @@ static void calculate_bandwidth(
        for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
                if (data->enable[i]) {
                        if (dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1 && (bw_equ(data->vsr[i], bw_int_to_fixed(1)) || (bw_leq(data->vsr[i], bw_frc_to_fixed(8, 10)) && bw_leq(data->v_taps[i], bw_int_to_fixed(2)) && data->lb_bpc[i] == 8)) && surface_type[i] == bw_def_graphics) {
-                               data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_sub(data->lb_partitions[i], bw_int_to_fixed(1)), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
+                               if (number_of_displays_enabled > 2)
+                                       data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_sub(data->lb_partitions[i], bw_int_to_fixed(2)), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
+                               else
+                                       data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_sub(data->lb_partitions[i], bw_int_to_fixed(1)), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
                        }
                        else {
                                data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_int_to_fixed(1 + data->line_buffer_prefetch[i]), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
@@ -1338,24 +1358,15 @@ static void calculate_bandwidth(
        for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
                if (data->enable[i]) {
                        if (dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1) {
-                               data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(8, 10), data->total_dmifmc_urgent_latency));
+                               data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(5, 10), data->total_dmifmc_urgent_latency));
                        }
                        else {
                                /*maximum_latency_hiding(i) = minimum_latency_hiding(i) + 1 / vsr(i) * h_total(i) / pixel_rate(i) + 0.5 * total_dmifmc_urgent_latency*/
-                               data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(8, 10), data->total_dmifmc_urgent_latency));
+                               data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(5, 10), data->total_dmifmc_urgent_latency));
                        }
                        data->maximum_latency_hiding_with_cursor[i] = bw_min2(data->maximum_latency_hiding[i], data->cursor_latency_hiding[i]);
                }
        }
-       /*initialize variables*/
-       number_of_displays_enabled = 0;
-       number_of_displays_enabled_with_margin = 0;
-       for (k = 0; k <= maximum_number_of_surfaces - 1; k++) {
-               if (data->enable[k]) {
-                       number_of_displays_enabled = number_of_displays_enabled + 1;
-               }
-               data->display_pstate_change_enable[k] = 0;
-       }
        for (i = 0; i <= 2; i++) {
                for (j = 0; j <= 7; j++) {
                        data->min_dram_speed_change_margin[i][j] = bw_int_to_fixed(9999);
@@ -1370,10 +1381,11 @@ static void calculate_bandwidth(
                                                        /*determine the minimum dram clock change margin for each set of clock frequencies*/
                                                        data->min_dram_speed_change_margin[i][j] = bw_min2(data->min_dram_speed_change_margin[i][j], data->dram_speed_change_margin);
                                                        /*compute the maximum clock frequuency required for the dram clock change at each set of clock frequencies*/
-                                                       data->dispclk_required_for_dram_speed_change[i][j] = bw_max3(data->dispclk_required_for_dram_speed_change[i][j], bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->active_time[k]))));
-                                                       if ((bw_ltn(data->dispclk_required_for_dram_speed_change[i][j], vbios->high_voltage_max_dispclk))) {
+                                                       data->dispclk_required_for_dram_speed_change_pipe[i][j] = bw_max2(bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->active_time[k]))));
+                                                       if ((bw_ltn(data->dispclk_required_for_dram_speed_change_pipe[i][j], vbios->high_voltage_max_dispclk))) {
                                                                data->display_pstate_change_enable[k] = 1;
                                                                data->num_displays_with_margin[i][j] = data->num_displays_with_margin[i][j] + 1;
+                                                               data->dispclk_required_for_dram_speed_change[i][j] = bw_max2(data->dispclk_required_for_dram_speed_change[i][j], data->dispclk_required_for_dram_speed_change_pipe[i][j]);
                                                        }
                                                }
                                        }
@@ -1383,10 +1395,11 @@ static void calculate_bandwidth(
                                                        /*determine the minimum dram clock change margin for each display pipe*/
                                                        data->min_dram_speed_change_margin[i][j] = bw_min2(data->min_dram_speed_change_margin[i][j], data->dram_speed_change_margin);
                                                        /*compute the maximum clock frequuency required for the dram clock change at each set of clock frequencies*/
-                                                       data->dispclk_required_for_dram_speed_change[i][j] = bw_max3(data->dispclk_required_for_dram_speed_change[i][j], bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]), data->active_time[k]))));
-                                                       if ((bw_ltn(data->dispclk_required_for_dram_speed_change[i][j], vbios->high_voltage_max_dispclk))) {
+                                                       data->dispclk_required_for_dram_speed_change_pipe[i][j] = bw_max2(bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]), data->active_time[k]))));
+                                                       if ((bw_ltn(data->dispclk_required_for_dram_speed_change_pipe[i][j], vbios->high_voltage_max_dispclk))) {
                                                                data->display_pstate_change_enable[k] = 1;
                                                                data->num_displays_with_margin[i][j] = data->num_displays_with_margin[i][j] + 1;
+                                                               data->dispclk_required_for_dram_speed_change[i][j] = bw_max2(data->dispclk_required_for_dram_speed_change[i][j], data->dispclk_required_for_dram_speed_change_pipe[i][j]);
                                                        }
                                                }
                                        }
@@ -1420,7 +1433,7 @@ static void calculate_bandwidth(
                data->displays_with_same_mode[i] = bw_int_to_fixed(0);
                if (data->enable[i] == 1 && data->display_pstate_change_enable[i] == 0 && bw_mtn(data->v_blank_dram_speed_change_margin[i], bw_int_to_fixed(0))) {
                        for (j = 0; j <= maximum_number_of_surfaces - 1; j++) {
-                               if ((data->enable[j] == 1 && bw_equ(data->source_width_rounded_up_to_chunks[i], data->source_width_rounded_up_to_chunks[j]) && bw_equ(data->source_height_rounded_up_to_chunks[i], data->source_height_rounded_up_to_chunks[j]) && bw_equ(data->vsr[i], data->vsr[j]) && bw_equ(data->hsr[i], data->hsr[j]) && bw_equ(data->pixel_rate[i], data->pixel_rate[j]))) {
+                               if ((i == j || data->display_synchronization_enabled) && (data->enable[j] == 1 && bw_equ(data->source_width_rounded_up_to_chunks[i], data->source_width_rounded_up_to_chunks[j]) && bw_equ(data->source_height_rounded_up_to_chunks[i], data->source_height_rounded_up_to_chunks[j]) && bw_equ(data->vsr[i], data->vsr[j]) && bw_equ(data->hsr[i], data->hsr[j]) && bw_equ(data->pixel_rate[i], data->pixel_rate[j]))) {
                                        data->displays_with_same_mode[i] = bw_add(data->displays_with_same_mode[i], bw_int_to_fixed(1));
                                }
                        }
@@ -1435,7 +1448,7 @@ static void calculate_bandwidth(
        /*aligned displays with the same timing.*/
        /*the display(s) with the negative margin can be switched in the v_blank region while the other*/
        /*displays are in v_blank or v_active.*/
-       if ((number_of_displays_enabled_with_margin + number_of_aligned_displays_with_no_margin == number_of_displays_enabled && bw_mtn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(9999)) && bw_ltn(data->dispclk_required_for_dram_speed_change[high][s_high], vbios->high_voltage_max_dispclk))) {
+       if (number_of_displays_enabled_with_margin > 0 && (number_of_displays_enabled_with_margin + number_of_aligned_displays_with_no_margin) == number_of_displays_enabled && bw_mtn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(9999)) && bw_ltn(data->dispclk_required_for_dram_speed_change[high][s_high], vbios->high_voltage_max_dispclk)) {
                data->nbp_state_change_enable = bw_def_yes;
        }
        else {
@@ -1448,6 +1461,25 @@ static void calculate_bandwidth(
        else {
                nbp_state_change_enable_blank = bw_def_no;
        }
+
+       /*average bandwidth*/
+       /*the average bandwidth with no compression is the vertical active time is the source width times the bytes per pixel divided by the line time, multiplied by the vertical scale ratio and the ratio of bytes per request divided by the useful bytes per request.*/
+       /*the average bandwidth with compression is the same, divided by the compression ratio*/
+       for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
+               if (data->enable[i]) {
+                       data->average_bandwidth_no_compression[i] = bw_div(bw_mul(bw_mul(bw_div(bw_mul(data->source_width_rounded_up_to_chunks[i], bw_int_to_fixed(data->bytes_per_pixel[i])), (bw_div(data->h_total[i], data->pixel_rate[i]))), data->vsr[i]), data->bytes_per_request[i]), data->useful_bytes_per_request[i]);
+                       data->average_bandwidth[i] = bw_div(data->average_bandwidth_no_compression[i], data->compression_rate[i]);
+               }
+       }
+       data->total_average_bandwidth_no_compression = bw_int_to_fixed(0);
+       data->total_average_bandwidth = bw_int_to_fixed(0);
+       for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
+               if (data->enable[i]) {
+                       data->total_average_bandwidth_no_compression = bw_add(data->total_average_bandwidth_no_compression, data->average_bandwidth_no_compression[i]);
+                       data->total_average_bandwidth = bw_add(data->total_average_bandwidth, data->average_bandwidth[i]);
+               }
+       }
+
        /*required yclk(pclk)*/
        /*yclk requirement only makes sense if the dmif and mcifwr data total page close-open time is less than the time for data transfer and the total pte requests fit in the scatter-gather saw queque size*/
        /*if that is the case, the yclk requirement is the maximum of the ones required by dmif and mcifwr, and the high/low yclk(pclk) is chosen accordingly*/
@@ -1497,17 +1529,20 @@ static void calculate_bandwidth(
        }
        else {
                data->required_dram_bandwidth_gbyte_per_second = bw_div(bw_max2(data->dmif_required_dram_bandwidth, data->mcifwr_required_dram_bandwidth), bw_int_to_fixed(1000));
-               if (bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[low]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[low][s_high], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[low][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[low][s_high] == number_of_displays_enabled_with_margin))) {
+               if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation, 100),yclk[low]),bw_div(bw_int_to_fixed(vbios->dram_channel_width_in_bits),bw_int_to_fixed(8))),bw_int_to_fixed(vbios->number_of_dram_channels)))
+                               && bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[low]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[low][s_high], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[low][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[low][s_high] == number_of_displays_enabled_with_margin))) {
                        yclk_message = bw_fixed_to_int(vbios->low_yclk);
                        data->y_clk_level = low;
                        data->dram_bandwidth = bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[low]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels));
                }
-               else if (bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[mid]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[mid][s_high], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[mid][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[mid][s_high] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation, 100),yclk[mid]),bw_div(bw_int_to_fixed(vbios->dram_channel_width_in_bits),bw_int_to_fixed(8))),bw_int_to_fixed(vbios->number_of_dram_channels)))
+                               && bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[mid]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[mid][s_high], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[mid][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[mid][s_high] == number_of_displays_enabled_with_margin))) {
                        yclk_message = bw_fixed_to_int(vbios->mid_yclk);
                        data->y_clk_level = mid;
                        data->dram_bandwidth = bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[mid]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels));
                }
-               else if (bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[high]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation, 100),yclk[high]),bw_div(bw_int_to_fixed(vbios->dram_channel_width_in_bits),bw_int_to_fixed(8))),bw_int_to_fixed(vbios->number_of_dram_channels)))
+                               && bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[high]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))) {
                        yclk_message = bw_fixed_to_int(vbios->high_yclk);
                        data->y_clk_level = high;
                        data->dram_bandwidth = bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[high]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels));
@@ -1523,8 +1558,8 @@ static void calculate_bandwidth(
        /*if that is the case, the sclk requirement is the maximum of the ones required by dmif and mcifwr, and the high/mid/low sclk is chosen accordingly, unless that choice results in foresaking dram speed/nb p-state change.*/
        /*the dmif and mcifwr sclk required is the one that allows the transfer of all pipe's data buffer size through the sclk bus in the time for data transfer*/
        /*for dmif, pte and cursor requests have to be included.*/
-       data->dmif_required_sclk = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer), (bw_mul(vbios->data_return_bus_width, bw_int_to_fixed(bus_efficiency))));
-       data->mcifwr_required_sclk = bw_div(bw_div(data->total_display_writes_required_data, data->display_writes_time_for_data_transfer), (bw_mul(vbios->data_return_bus_width, bw_int_to_fixed(bus_efficiency))));
+       data->dmif_required_sclk = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer), (bw_mul(vbios->data_return_bus_width, bw_frc_to_fixed(dceip->percent_of_ideal_port_bw_received_after_urgent_latency, 100))));
+       data->mcifwr_required_sclk = bw_div(bw_div(data->total_display_writes_required_data, data->display_writes_time_for_data_transfer), vbios->data_return_bus_width);
        if (bw_mtn(data->scatter_gather_total_pte_requests, dceip->maximum_total_outstanding_pte_requests_allowed_by_saw)) {
                data->required_sclk = bw_int_to_fixed(9999);
                sclk_message = bw_def_exceeded_allowed_outstanding_pte_req_queue_size;
@@ -1537,42 +1572,56 @@ static void calculate_bandwidth(
        }
        else {
                data->required_sclk = bw_max2(data->dmif_required_sclk, data->mcifwr_required_sclk);
-               if (bw_ltn(data->required_sclk, sclk[s_low]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_low], vbios->low_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_low] == number_of_displays_enabled_with_margin))) {
+               if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[low]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_low]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_low], vbios->low_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_low] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_low;
                        data->sclk_level = s_low;
                        data->required_sclk = vbios->low_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_mid1]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid1], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid1] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[mid]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_mid1]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid1], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid1] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_mid;
                        data->sclk_level = s_mid1;
                        data->required_sclk = vbios->mid1_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_mid2]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid2], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid2] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid2]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_mid2]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid2], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid2] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_mid;
                        data->sclk_level = s_mid2;
                        data->required_sclk = vbios->mid2_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_mid3]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid3], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid3] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid3]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_mid3]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid3], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid3] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_mid;
                        data->sclk_level = s_mid3;
                        data->required_sclk = vbios->mid3_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_mid4]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid4], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid4] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid4]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_mid4]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid4], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid4] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_mid;
                        data->sclk_level = s_mid4;
                        data->required_sclk = vbios->mid4_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_mid5]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid5], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid5] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid5]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_mid5]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid5], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid5] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_mid;
                        data->sclk_level = s_mid5;
                        data->required_sclk = vbios->mid5_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_mid6]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid6] == number_of_displays_enabled_with_margin))) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid6]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_mid6]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid6] == number_of_displays_enabled_with_margin))) {
                        sclk_message = bw_def_mid;
                        data->sclk_level = s_mid6;
                        data->required_sclk = vbios->mid6_sclk;
                }
-               else if (bw_ltn(data->required_sclk, sclk[s_high])) {
+               else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_high]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_high])) {
+                       sclk_message = bw_def_high;
+                       data->sclk_level = s_high;
+                       data->required_sclk = vbios->high_sclk;
+               }
+               else if (bw_meq(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_high]),vbios->data_return_bus_width))
+                               && bw_ltn(data->required_sclk, sclk[s_high])) {
                        sclk_message = bw_def_high;
                        data->sclk_level = s_high;
                        data->required_sclk = vbios->high_sclk;
@@ -1681,7 +1730,7 @@ static void calculate_bandwidth(
                data->total_dispclk_required_with_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_with_ramping_with_request_bandwidth, data->dispclk_required_for_blackout_duration[data->y_clk_level][data->sclk_level]);
                data->total_dispclk_required_without_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_without_ramping_with_request_bandwidth, data->dispclk_required_for_blackout_duration[data->y_clk_level][data->sclk_level]);
        }
-       if (data->nbp_state_change_enable == bw_def_yes) {
+       if (data->nbp_state_change_enable == bw_def_yes && data->increase_voltage_to_support_mclk_switch) {
                data->total_dispclk_required_with_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_with_ramping_with_request_bandwidth, data->dispclk_required_for_dram_speed_change[data->y_clk_level][data->sclk_level]);
                data->total_dispclk_required_without_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_without_ramping_with_request_bandwidth, data->dispclk_required_for_dram_speed_change[data->y_clk_level][data->sclk_level]);
        }
@@ -1861,23 +1910,6 @@ static void calculate_bandwidth(
        else {
                data->mcifwrdram_access_efficiency = bw_int_to_fixed(0);
        }
-       /*average bandwidth*/
-       /*the average bandwidth with no compression is the vertical active time is the source width times the bytes per pixel divided by the line time, multiplied by the vertical scale ratio and the ratio of bytes per request divided by the useful bytes per request.*/
-       /*the average bandwidth with compression is the same, divided by the compression ratio*/
-       for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
-               if (data->enable[i]) {
-                       data->average_bandwidth_no_compression[i] = bw_div(bw_mul(bw_mul(bw_div(bw_mul(data->source_width_rounded_up_to_chunks[i], bw_int_to_fixed(data->bytes_per_pixel[i])), (bw_div(data->h_total[i], data->pixel_rate[i]))), data->vsr[i]), data->bytes_per_request[i]), data->useful_bytes_per_request[i]);
-                       data->average_bandwidth[i] = bw_div(data->average_bandwidth_no_compression[i], data->compression_rate[i]);
-               }
-       }
-       data->total_average_bandwidth_no_compression = bw_int_to_fixed(0);
-       data->total_average_bandwidth = bw_int_to_fixed(0);
-       for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
-               if (data->enable[i]) {
-                       data->total_average_bandwidth_no_compression = bw_add(data->total_average_bandwidth_no_compression, data->average_bandwidth_no_compression[i]);
-                       data->total_average_bandwidth = bw_add(data->total_average_bandwidth, data->average_bandwidth[i]);
-               }
-       }
        /*stutter efficiency*/
        /*the stutter efficiency is the frame-average time in self-refresh divided by the frame-average stutter cycle duration.  only applies if the display write-back is not enabled.*/
        /*the frame-average stutter cycle used is the minimum for all pipes of the frame-average data buffer size in time, times the compression rate*/
@@ -1905,7 +1937,7 @@ static void calculate_bandwidth(
                        data->total_stutter_dmif_buffer_size = bw_fixed_to_int(bw_add(data->stutter_dmif_buffer_size[i], bw_int_to_fixed(data->total_stutter_dmif_buffer_size)));
                }
        }
-       data->stutter_burst_time = bw_div(bw_int_to_fixed(data->total_stutter_dmif_buffer_size), bw_min2(bw_mul(data->dram_bandwidth, data->dmifdram_access_efficiency), bw_mul(sclk[data->sclk_level], bw_int_to_fixed(32))));
+       data->stutter_burst_time = bw_div(bw_int_to_fixed(data->total_stutter_dmif_buffer_size), bw_mul(sclk[data->sclk_level], vbios->data_return_bus_width));
        data->num_stutter_bursts = data->total_bytes_requested / data->min_stutter_dmif_buffer_size;
        data->total_stutter_cycle_duration = bw_add(bw_add(data->min_stutter_refresh_duration, vbios->stutter_self_refresh_exit_latency), data->stutter_burst_time);
        data->time_in_self_refresh = data->min_stutter_refresh_duration;
@@ -1957,7 +1989,7 @@ static void calculate_bandwidth(
        for (i = 1; i <= 5; i++) {
                data->display_reads_time_for_data_transfer_and_urgent_latency = bw_sub(data->min_read_buffer_size_in_time, bw_mul(data->total_dmifmc_urgent_trips, bw_int_to_fixed(i)));
                if (pipe_check == bw_def_ok && (bw_mtn(data->display_reads_time_for_data_transfer_and_urgent_latency, data->dmif_total_page_close_open_time))) {
-                       data->dmif_required_sclk_for_urgent_latency[i] = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer_and_urgent_latency), (bw_mul(vbios->data_return_bus_width, bw_int_to_fixed(bus_efficiency))));
+                       data->dmif_required_sclk_for_urgent_latency[i] = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer_and_urgent_latency), (bw_mul(vbios->data_return_bus_width, bw_frc_to_fixed(dceip->percent_of_ideal_port_bw_received_after_urgent_latency, 100))));
                }
                else {
                        data->dmif_required_sclk_for_urgent_latency[i] = bw_int_to_fixed(bw_def_na);
@@ -2036,6 +2068,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
                vbios.blackout_duration = bw_int_to_fixed(0); /* us */
                vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
 
+               dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
+               dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
+               dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
                dceip.large_cursor = false;
                dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
                dceip.dmif_pipe_en_fbc_chunk_tracker = false;
@@ -2146,6 +2181,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
                vbios.blackout_duration = bw_int_to_fixed(0); /* us */
                vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
 
+               dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
+               dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
+               dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
                dceip.large_cursor = false;
                dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
                dceip.dmif_pipe_en_fbc_chunk_tracker = false;
@@ -2259,6 +2297,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
                vbios.blackout_duration = bw_int_to_fixed(0); /* us */
                vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
 
+               dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
+               dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
+               dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
                dceip.large_cursor = false;
                dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
                dceip.dmif_pipe_en_fbc_chunk_tracker = false;
@@ -2369,6 +2410,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
                vbios.blackout_duration = bw_int_to_fixed(0); /* us */
                vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
 
+               dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
+               dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
+               dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
                dceip.large_cursor = false;
                dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
                dceip.dmif_pipe_en_fbc_chunk_tracker = false;
@@ -2479,6 +2523,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
                vbios.blackout_duration = bw_int_to_fixed(0); /* us */
                vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
 
+               dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
+               dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
+               dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
                dceip.large_cursor = false;
                dceip.dmif_request_buffer_size = bw_int_to_fixed(2304);
                dceip.dmif_pipe_en_fbc_chunk_tracker = true;
@@ -2597,6 +2644,7 @@ static void populate_initial_data(
        data->graphics_tiling_mode = bw_def_tiled;
        data->underlay_micro_tile_mode = bw_def_display_micro_tiling;
        data->graphics_micro_tile_mode = bw_def_display_micro_tiling;
+       data->increase_voltage_to_support_mclk_switch = true;
 
        /* Pipes with underlay first */
        for (i = 0; i < pipe_count; i++) {
index ae2399f..a9bfe9f 100644 (file)
@@ -130,6 +130,9 @@ enum bw_defines {
 
 struct bw_calcs_dceip {
        enum bw_calcs_version version;
+       uint32_t percent_of_ideal_port_bw_received_after_urgent_latency;
+       uint32_t max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation;
+       uint32_t max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation;
        bool large_cursor;
        uint32_t cursor_max_outstanding_group_num;
        bool dmif_pipe_en_fbc_chunk_tracker;
@@ -230,6 +233,7 @@ struct bw_calcs_vbios {
 
 struct bw_calcs_data {
        /* data for all displays */
+       bool display_synchronization_enabled;
        uint32_t number_of_displays;
        enum bw_defines underlay_surface_type;
        enum bw_defines panning_and_bezel_adjustment;
@@ -241,6 +245,7 @@ struct bw_calcs_data {
        bool d1_display_write_back_dwb_enable;
        enum bw_defines d1_underlay_mode;
 
+       bool increase_voltage_to_support_mclk_switch;
        bool cpup_state_change_enable;
        bool cpuc_state_change_enable;
        bool nbp_state_change_enable;
@@ -449,6 +454,7 @@ struct bw_calcs_data {
        struct bw_fixed dram_speed_change_line_source_transfer_time[maximum_number_of_surfaces][3][8];
        struct bw_fixed min_dram_speed_change_margin[3][8];
        struct bw_fixed dispclk_required_for_dram_speed_change[3][8];
+       struct bw_fixed dispclk_required_for_dram_speed_change_pipe[3][8];
        struct bw_fixed blackout_duration_margin[3][8];
        struct bw_fixed dispclk_required_for_blackout_duration[3][8];
        struct bw_fixed dispclk_required_for_blackout_recovery[3][8];