mlxsw: reg: Add Router ECMP Configuration Register Version 2

The RECRv2 register is used for setting up the router's ECMP hash
configuration.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index db6cd26..5066553 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -5844,6 +5844,137 @@ static inline void mlxsw_reg_rigr2_erif_entry_pack(char *payload, int index,
        mlxsw_reg_rigr2_erif_entry_erif_set(payload, index, erif);
 }
 
+/* RECR-V2 - Router ECMP Configuration Version 2 Register
+ * ------------------------------------------------------
+ */
+#define MLXSW_REG_RECR2_ID 0x8025
+#define MLXSW_REG_RECR2_LEN 0x38
+
+MLXSW_REG_DEFINE(recr2, MLXSW_REG_RECR2_ID, MLXSW_REG_RECR2_LEN);
+
+/* reg_recr2_pp
+ * Per-port configuration
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, recr2, pp, 0x00, 24, 1);
+
+/* reg_recr2_sh
+ * Symmetric hash
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, recr2, sh, 0x00, 8, 1);
+
+/* reg_recr2_seed
+ * Seed
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, recr2, seed, 0x08, 0, 32);
+
+enum {
+       /* Enable IPv4 fields if packet is not TCP and not UDP */
+       MLXSW_REG_RECR2_IPV4_EN_NOT_TCP_NOT_UDP = 3,
+       /* Enable IPv4 fields if packet is TCP or UDP */
+       MLXSW_REG_RECR2_IPV4_EN_TCP_UDP         = 4,
+       /* Enable IPv6 fields if packet is not TCP and not UDP */
+       MLXSW_REG_RECR2_IPV6_EN_NOT_TCP_NOT_UDP = 5,
+       /* Enable IPv6 fields if packet is TCP or UDP */
+       MLXSW_REG_RECR2_IPV6_EN_TCP_UDP         = 6,
+       /* Enable TCP/UDP header fields if packet is IPv4 */
+       MLXSW_REG_RECR2_TCP_UDP_EN_IPV4         = 7,
+       /* Enable TCP/UDP header fields if packet is IPv6 */
+       MLXSW_REG_RECR2_TCP_UDP_EN_IPV6         = 8,
+};
+
+/* reg_recr2_outer_header_enables
+ * Bit mask where each bit enables a specific layer to be included in
+ * the hash calculation.
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, recr2, outer_header_enables, 0x10, 0x04, 1);
+
+enum {
+       /* IPv4 Source IP */
+       MLXSW_REG_RECR2_IPV4_SIP0                       = 9,
+       MLXSW_REG_RECR2_IPV4_SIP3                       = 12,
+       /* IPv4 Destination IP */
+       MLXSW_REG_RECR2_IPV4_DIP0                       = 13,
+       MLXSW_REG_RECR2_IPV4_DIP3                       = 16,
+       /* IP Protocol */
+       MLXSW_REG_RECR2_IPV4_PROTOCOL                   = 17,
+       /* IPv6 Source IP */
+       MLXSW_REG_RECR2_IPV6_SIP0_7                     = 21,
+       MLXSW_REG_RECR2_IPV6_SIP8                       = 29,
+       MLXSW_REG_RECR2_IPV6_SIP15                      = 36,
+       /* IPv6 Destination IP */
+       MLXSW_REG_RECR2_IPV6_DIP0_7                     = 37,
+       MLXSW_REG_RECR2_IPV6_DIP8                       = 45,
+       MLXSW_REG_RECR2_IPV6_DIP15                      = 52,
+       /* IPv6 Next Header */
+       MLXSW_REG_RECR2_IPV6_NEXT_HEADER                = 53,
+       /* IPv6 Flow Label */
+       MLXSW_REG_RECR2_IPV6_FLOW_LABEL                 = 57,
+       /* TCP/UDP Source Port */
+       MLXSW_REG_RECR2_TCP_UDP_SPORT                   = 74,
+       /* TCP/UDP Destination Port */
+       MLXSW_REG_RECR2_TCP_UDP_DPORT                   = 75,
+};
+
+/* reg_recr2_outer_header_fields_enable
+ * Packet fields to enable for ECMP hash subject to outer_header_enable.
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, recr2, outer_header_fields_enable, 0x14, 0x14, 1);
+
+static inline void mlxsw_reg_recr2_ipv4_sip_enable(char *payload)
+{
+       int i;
+
+       for (i = MLXSW_REG_RECR2_IPV4_SIP0; i <= MLXSW_REG_RECR2_IPV4_SIP3; i++)
+               mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i,
+                                                              true);
+}
+
+static inline void mlxsw_reg_recr2_ipv4_dip_enable(char *payload)
+{
+       int i;
+
+       for (i = MLXSW_REG_RECR2_IPV4_DIP0; i <= MLXSW_REG_RECR2_IPV4_DIP3; i++)
+               mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i,
+                                                              true);
+}
+
+static inline void mlxsw_reg_recr2_ipv6_sip_enable(char *payload)
+{
+       int i = MLXSW_REG_RECR2_IPV6_SIP0_7;
+
+       mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, true);
+
+       i = MLXSW_REG_RECR2_IPV6_SIP8;
+       for (; i <= MLXSW_REG_RECR2_IPV6_SIP15; i++)
+               mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i,
+                                                              true);
+}
+
+static inline void mlxsw_reg_recr2_ipv6_dip_enable(char *payload)
+{
+       int i = MLXSW_REG_RECR2_IPV6_DIP0_7;
+
+       mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i, true);
+
+       i = MLXSW_REG_RECR2_IPV6_DIP8;
+       for (; i <= MLXSW_REG_RECR2_IPV6_DIP15; i++)
+               mlxsw_reg_recr2_outer_header_fields_enable_set(payload, i,
+                                                              true);
+}
+
+static inline void mlxsw_reg_recr2_pack(char *payload, u32 seed)
+{
+       MLXSW_REG_ZERO(recr2, payload);
+       mlxsw_reg_recr2_pp_set(payload, false);
+       mlxsw_reg_recr2_sh_set(payload, true);
+       mlxsw_reg_recr2_seed_set(payload, seed);
+}
+
 /* RMFT-V2 - Router Multicast Forwarding Table Version 2 Register
  * --------------------------------------------------------------
  * The RMFT_V2 register is used to configure and query the multicast table.
@@ -7313,6 +7444,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
        MLXSW_REG(raleu),
        MLXSW_REG(rauhtd),
        MLXSW_REG(rigr2),
+       MLXSW_REG(recr2),
        MLXSW_REG(rmft2),
        MLXSW_REG(mfcr),
        MLXSW_REG(mfsc),