e1000e: add workaround for possible stalled packet

This works around a possible stalled packet issue, which may occur due to
clock recovery from the PCH being too slow, when the LAN is transitioning
from K1 at 1G link speed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 395b057..a1fab77 100644 (file)
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1429,6 +1429,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
                        else
                                phy_reg |= 0xFA;
                        e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg);
+
+                       if (speed == SPEED_1000) {
+                               hw->phy.ops.read_reg_locked(hw, HV_PM_CTRL,
+                                                           &phy_reg);
+
+                               phy_reg |= HV_PM_CTRL_K1_CLK_REQ;
+
+                               hw->phy.ops.write_reg_locked(hw, HV_PM_CTRL,
+                                                            phy_reg);
+                       }
                }
                hw->phy.ops.release(hw);
 

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index eb09c75..1502895 100644 (file)
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -210,7 +210,7 @@
 
 /* PHY Power Management Control */
 #define HV_PM_CTRL             PHY_REG(770, 17)
-#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
+#define HV_PM_CTRL_K1_CLK_REQ          0x200
 #define HV_PM_CTRL_K1_ENABLE           0x4000
 
 #define I217_PLL_CLOCK_GATE_REG        PHY_REG(772, 28)