Pull ARM Samsung SoC fixes from Arnd Bergmann.
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: S3C24XX: Correct CAMIF interrupt definitions
ARM: S3C24XX: Correct AC97 clock control bit for S3C2440
ARM: SAMSUNG: fix race in s3c_adc_start for ADC
ARM: SAMSUNG: Update default rate for xusbxti clock
ARM: EXYNOS: register devices in 'need_restore' state for pm_domains
ARM: EXYNOS: read initial state of power domain from hw registers
Contact: linux-mtd@lists.infradead.org
Description:
This allows the user to examine and adjust the criteria by which
- mtd returns -EUCLEAN from mtd_read(). If the maximum number of
- bit errors that were corrected on any single region comprising
- an ecc step (as reported by the driver) equals or exceeds this
- value, -EUCLEAN is returned. Otherwise, absent an error, 0 is
- returned. Higher layers (e.g., UBI) use this return code as an
- indication that an erase block may be degrading and should be
- scrutinized as a candidate for being marked as bad.
+ mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the
+ maximum number of bit errors that were corrected on any single
+ region comprising an ecc step (as reported by the driver) equals
+ or exceeds this value, -EUCLEAN is returned. Otherwise, absent
+ an error, 0 is returned. Higher layers (e.g., UBI) use this
+ return code as an indication that an erase block may be
+ degrading and should be scrutinized as a candidate for being
+ marked as bad.
The initial value may be specified by the flash device driver.
If not, then the default value is ecc_strength.
block degradation, but high enough to avoid the consequences of
a persistent return value of -EUCLEAN on devices where sticky
bitflips occur. Note that if bitflip_threshold exceeds
- ecc_strength, -EUCLEAN is never returned by mtd_read().
+ ecc_strength, -EUCLEAN is never returned by the read operations.
Conversely, if bitflip_threshold is zero, -EUCLEAN is always
returned, absent a hard error.
from RGB to Y'CbCr color space.
</entry>
</row>
- <row id = "v4l2-jpeg-chroma-subsampling">
+ <row>
<entrytbl spanname="descr" cols="2">
<tbody valign="top">
<row>
processing controls. These controls are described in <xref
linkend="image-process-controls" />.</entry>
</row>
- <row>
- <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
- <entry>0x9d0000</entry>
- <entry>The class containing JPEG compression controls.
-These controls are described in <xref
- linkend="jpeg-controls" />.</entry>
- </row>
</tbody>
</tgroup>
</table>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
+F: drivers/cpufreq/omap-cpufreq.c
OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
M: Rajendra Nayak <rnayak@ti.com>
M: Peter Zijlstra <peterz@infradead.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
-F: kernel/sched*
+F: kernel/sched/
F: include/linux/sched.h
SCORE ARCHITECTURE
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ * active whenever the MPU is active. True for interconnects and
+ * the WKUP clockdomains.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
+ .flags = CLKDM_ACTIVE_WITH_MPU,
};
.cm_inst = OMAP4430_PRM_WKUP_CM_INST,
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
};
static struct clockdomain emu_sys_44xx_clkdm = {
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle. If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby. No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
+ bool clkdm_act;
if (!oh->class->sysc)
return;
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+ clkdm_act = ((oh->clkdm &&
+ oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+ (oh->_clk && oh->_clk->clkdm &&
+ oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+ if (clkdm_act && !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+ HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+ /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
#include <mach/common.h>
#include <mach/emev2.h>
+#ifdef CONFIG_ARCH_SH73A0
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
#define is_r8a7779() machine_is_marzen()
#ifdef CONFIG_ARCH_EMEV2
&ab8500_device,
};
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
- &snowball_led_dev,
- &snowball_key_dev,
-};
-
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
#ifdef CONFIG_MACH_UX500_DT
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+};
+
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
};
/* TODO: Once MTU has been DT:ed place code above into else. */
if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
np = of_find_matching_node(NULL, prcmu_timer_of_match);
if (!np)
+#endif
goto dt_fail;
tmp_base = of_iomap(np, 0);
#define VMALLOC_END 0xffffffff
#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
#endif /* _H8300_PGTABLE_H */
break; \
default: \
__gu_err = __get_user_bad(); \
- __gu_val = 0; \
break; \
} \
(x) = __gu_val; \
return 0;
}
+#define __clear_user clear_user
+
#endif /* _H8300_UACCESS_H */
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
#include <linux/profile.h>
#include <asm/io.h>
+#include <asm/irq_regs.h>
#include <asm/timer.h>
#define TICK_SIZE (tick_nsec / 1000)
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
}
#ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
#ifndef _ASM_TIMEX_H
#define _ASM_TIMEX_H
-#include <asm/hardirq.h>
#include <unit/timex.h>
#define TICK_SIZE (tick_nsec / 1000)
extern int init_clockevents(void);
extern int init_clocksource(void);
-static inline void setup_jiffies_interrupt(int irq,
- struct irqaction *action)
-{
- u16 tmp;
- setup_irq(irq, action);
- set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
- GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- tmp = GxICR(irq);
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_TIMEX_H */
{
}
+static inline void setup_jiffies_interrupt(int irq,
+ struct irqaction *action)
+{
+ u16 tmp;
+ setup_irq(irq, action);
+ set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
+ GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ tmp = GxICR(irq);
+}
+
int __init init_clockevents(void)
{
struct clock_event_device *cd;
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/irqreturn.h>
+
struct clocksource;
struct clock_event_device;
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER9
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
case TM9IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER3
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
#include <linux/kdebug.h>
#include <linux/bug.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <asm/io.h>
static unsigned long pci_sram_allocated = 0xbc000000;
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
#include <linux/platform_device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
}
#ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory")
#else
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
return !regs->softe;
}
+extern bool prep_irq_for_idle(void);
+
#else /* CONFIG_PPC64 */
#define SET_MSR_EE(x) mtmsr(x)
*/
if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
else {
/*
* We should already be hard disabled here. We had bugs
__hard_irq_enable();
}
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+ /*
+ * First we need to hard disable to ensure no interrupt
+ * occurs before we effectively enter the low power state
+ */
+ hard_irq_disable();
+
+ /*
+ * If anything happened while we were soft-disabled,
+ * we return now and do not enter the low power state.
+ */
+ if (lazy_irq_pending())
+ return false;
+
+ /* Tell lockdep we are about to re-enable */
+ trace_hardirqs_on();
+
+ /*
+ * Mark interrupts as soft-enabled and clear the
+ * PACA_IRQ_HARD_DIS from the pending mask since we
+ * are about to hard enable as well as a side effect
+ * of entering the low power state.
+ */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ local_paca->soft_enabled = 1;
+
+ /* Tell the caller to enter the low power state */
+ return true;
+}
+
#endif /* CONFIG_PPC64 */
int arch_show_interrupts(struct seq_file *p, int prec)
case H_PUT_TCE:
return kvmppc_h_pr_put_tce(vcpu);
case H_CEDE:
+ vcpu->arch.shared->msr |= MSR_EE;
kvm_vcpu_block(vcpu);
clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
vcpu->stat.halt_wakeup++;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
- struct assoc_arrays aa;
+ struct assoc_arrays aa = { .arrays = NULL };
n = of_get_drconf_memory(memory, &dm);
if (!n)
{
unsigned long ctrl, thread_switch_control;
- /*
- * We need to hard disable interrupts, the local_irq_enable() done by
- * our caller upon return will hard re-enable.
- */
- hard_irq_disable();
+ /* Ensure our interrupt state is properly tracked */
+ if (!prep_irq_for_idle())
+ return;
ctrl = mfspr(SPRN_CTRLF);
*/
ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
mtspr(SPRN_CTRLT, ctrl);
+
+ /* Re-enable interrupts in MSR */
+ __hard_irq_enable();
}
static int cbe_system_reset_exception(struct pt_regs *regs)
static void check_and_cede_processor(void)
{
/*
- * Interrupts are soft-disabled at this point,
- * but not hard disabled. So an interrupt might have
- * occurred before entering NAP, and would be potentially
- * lost (edge events, decrementer events, etc...) unless
- * we first hard disable then check.
+ * Ensure our interrupt state is properly tracked,
+ * also checks if no interrupt has occurred while we
+ * were soft-disabled
*/
- hard_irq_disable();
- if (!lazy_irq_pending())
+ if (prep_irq_for_idle()) {
cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Ensure that H_CEDE returns with IRQs on */
+ if (WARN_ON(!(mfmsr() & MSR_EE)))
+ __hard_irq_enable();
+#endif
+ }
}
static int dedicated_cede_loop(struct cpuidle_device *dev,
return -1;
}
-#define outb(x, y) BUG()
-#define outw(x, y) BUG()
-#define outl(x, y) BUG()
+static inline void outb(unsigned char x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+ BUG();
+}
#define inb_p(addr) inb(addr)
#define inw_p(addr) inw(addr)
#include <linux/serial_core.h>
#include <linux/io.h>
#include <cpu/serial.h>
-#include <asm/gpio.h>
+#include <cpu/gpio.h>
static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
{
#include <linux/kernel.h>
#include <linux/string.h>
+#include <asm/byteorder.h>
#include <asm/backtrace.h>
#include <asm/tile-desc.h>
#include <arch/abi.h>
bytes_to_prefetch / sizeof(tile_bundle_bits);
}
- /* Decode the next bundle. */
- bundle.bits = prefetched_bundles[next_bundle++];
+ /*
+ * Decode the next bundle.
+ * TILE always stores instruction bundles in little-endian
+ * mode, even when the chip is running in big-endian mode.
+ */
+ bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
bundle.num_insns =
parse_insn_tile(bundle.bits, pc, bundle.insns);
num_info_ops = bt_get_info_ops(&bundle, info_operands);
struct task_struct *from = current, *to = arg;
to->thread.saved_task = from;
- rcu_switch_from(from);
switch_to(from, to, from);
}
return nr;
}
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+ if (!seccomp_mode(&tsk->seccomp))
+ return 0;
+ task_pt_regs(tsk)->orig_ax = syscall_nr;
+ task_pt_regs(tsk)->ax = syscall_nr;
+ return __secure_computing(syscall_nr);
+}
+
static bool write_ok_or_segv(unsigned long ptr, size_t size)
{
/*
int vsyscall_nr;
int prev_sig_on_uaccess_error;
long ret;
+ int skip;
/*
* No point in checking CS -- the only way to get here is a user mode
}
tsk = current;
- if (seccomp_mode(&tsk->seccomp))
- do_exit(SIGKILL);
-
/*
* With a real vsyscall, page faults cause SIGSEGV. We want to
* preserve that behavior to make writing exploits harder.
* address 0".
*/
ret = -EFAULT;
+ skip = 0;
switch (vsyscall_nr) {
case 0:
+ skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
!write_ok_or_segv(regs->si, sizeof(struct timezone)))
break;
break;
case 1:
+ skip = vsyscall_seccomp(tsk, __NR_time);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(time_t)))
break;
break;
case 2:
+ skip = vsyscall_seccomp(tsk, __NR_getcpu);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
!write_ok_or_segv(regs->si, sizeof(unsigned)))
break;
current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+ if (skip) {
+ if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+ goto do_ret;
+ goto done; /* seccomp trace/trap */
+ }
+
if (ret == -EFAULT) {
/* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
regs->ax = ret;
+do_ret:
/* Emulate a ret instruction. */
regs->ip = caller;
regs->sp += 8;
-
+done:
return true;
sigsegv:
/* Don't leak any random bits. */
- memset(elfregs, 0, sizeof (elfregs));
+ memset(elfregs, 0, sizeof(*elfregs));
/* Note: PS.EXCM is not set while user task is running; its
* being set in regs->ps is for exception handling convenience.
return_ACPI_STATUS(status);
}
- if (sleep_state != ACPI_STATE_S5) {
- /*
- * Disable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
- }
-
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
[ACPI_EVENT_POWER_BUTTON].
status_register_id, ACPI_CLEAR_STATUS);
- /*
- * Enable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
-
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(status);
}
config GPIO_MSM_V1
tristate "Qualcomm MSM GPIO v1"
- depends on GPIOLIB && ARCH_MSM
+ depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
help
Say yes here to support the GPIO interface on ARM v6 based
Qualcomm MSM chips. Most of the pins on the MSM can be
return 0;
}
+EXPORT_SYMBOL(devm_gpio_request_one);
/**
* devm_gpio_free - free an interrupt
writel(~0, port->base + GPIO_ISR);
if (mxc_gpio_hwtype == IMX21_GPIO) {
- /* setup one handler for all GPIO interrupts */
- if (pdev->id == 0)
- irq_set_chained_handler(port->irq,
- mx2_gpio_irq_handler);
+ /*
+ * Setup one handler for all GPIO interrupts. Actually setting
+ * the handler is needed only once, but doing it for every port
+ * is more robust and easier.
+ */
+ irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
} else {
/* setup one handler for each entry */
irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
if (bank->dbck_enable_mask && !bank->dbck_enabled) {
clk_enable(bank->dbck);
bank->dbck_enabled = true;
+
+ __raw_writel(bank->dbck_enable_mask,
+ bank->base + bank->regs->debounce_en);
}
}
static inline void _gpio_dbck_disable(struct gpio_bank *bank)
{
if (bank->dbck_enable_mask && bank->dbck_enabled) {
+ /*
+ * Disable debounce before cutting it's clock. If debounce is
+ * enabled but the clock is not, GPIO module seems to be unable
+ * to detect events and generate interrupts at least on OMAP3.
+ */
+ __raw_writel(0, bank->base + bank->regs->debounce_en);
+
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
bank->is_mpuio = pdata->is_mpuio;
bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
bank->loses_context = pdata->loses_context;
- bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
#ifdef CONFIG_OF_GPIO
bank->chip.of_node = of_node_get(node);
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (bank->loses_context)
+ bank->get_context_loss_count = pdata->get_context_loss_count;
+
pm_runtime_put(bank->dev);
list_add_tail(&bank->node, &omap_gpio_list);
}
spin_lock_init(&chip->lock);
gsta_gpio_setup(chip);
- for (i = 0; i < GSTA_NR_GPIO; i++)
- gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
+ if (gpio_pdata)
+ for (i = 0; i < GSTA_NR_GPIO; i++)
+ gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
/* 384 was used in previous code: be compatible for other drivers */
err = irq_alloc_descs(-1, 384, GSTA_NR_GPIO, NUMA_NO_NODE);
tps65910_gpio->gpio_chip.set = tps65910_gpio_set;
tps65910_gpio->gpio_chip.get = tps65910_gpio_get;
tps65910_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+ tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node;
+#endif
if (pdata && pdata->gpio_base)
tps65910_gpio->gpio_chip.base = pdata->gpio_base;
else
struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+ if (value)
+ value = WM8994_GPN_LVL;
+
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
- WM8994_GPN_DIR, 0);
+ WM8994_GPN_DIR | WM8994_GPN_LVL, value);
}
static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007
+#define USB_VENDOR_ID_MADCATZ 0x0738
+#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
/* Start monitoring */
it87_write_value(data, IT87_REG_CONFIG,
- (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
| (update_vbat ? 0x41 : 0x01));
}
spin_lock_init(&hwlock->lock);
hwlock->bank = bank;
- ret = hwspin_lock_register_single(hwlock, i);
+ ret = hwspin_lock_register_single(hwlock, base_id + i);
if (ret)
goto reg_failed;
}
reg_failed:
while (--i >= 0)
- hwspin_lock_unregister_single(i);
+ hwspin_lock_unregister_single(base_id + i);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_register);
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
+ { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
+ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
{ }
};
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+/* MacbookPro10,1 (unibody, June 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
+ /* MacbookPro10,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
/* Terminating entry */
{}
};
{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+ },
{}
};
static ATOMIC_NOTIFIER_HEAD(ppr_notifier);
int amd_iommu_max_glx_val = -1;
+static struct dma_map_ops amd_iommu_dma_ops;
+
/*
* general struct to manage commands send to an IOMMU
*/
return;
de_fflush = debugfs_create_bool("fullflush", 0444, stats_dir,
- (u32 *)&amd_iommu_unmap_flush);
+ &amd_iommu_unmap_flush);
amd_iommu_stats_add(&compl_wait);
amd_iommu_stats_add(&cnt_map_single);
list_add_tail(&dma_domain->list, &iommu_pd_list);
spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ dev_data = get_dev_data(dev);
+
+ if (!dev_data->passthrough)
+ dev->archdata.dma_ops = &amd_iommu_dma_ops;
+ else
+ dev->archdata.dma_ops = &nommu_dma_ops;
+
break;
case BUS_NOTIFY_DEL_DEVICE:
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
+u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
amd_iommu_init_api();
+ x86_platform.iommu_shutdown = disable_iommus;
+
if (iommu_pass_through)
goto out;
else
printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
- x86_platform.iommu_shutdown = disable_iommus;
-
out:
return ret;
* If true, the addresses will be flushed on unmap time, not when
* they are reused
*/
-extern bool amd_iommu_unmap_flush;
+extern u32 amd_iommu_unmap_flush;
/* Smallest number of PASIDs supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasids;
return 0;
as->pte_count = devm_kzalloc(smmu->dev,
- sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_KERNEL);
+ sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_ATOMIC);
if (!as->pte_count) {
dev_err(smmu->dev,
"failed to allocate smmu_device PTE cunters\n");
return -ENOMEM;
}
- as->pdir_page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ as->pdir_page = alloc_page(GFP_ATOMIC | __GFP_DMA);
if (!as->pdir_page) {
dev_err(smmu->dev,
"failed to allocate smmu_device page directory\n");
*/
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
atomic_set(&r1_bio->remaining, read_targets);
- for (i = 0; i < conf->raid_disks * 2; i++) {
+ for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) {
bio = r1_bio->bios[i];
if (bio->bi_end_io == end_sync_read) {
+ read_targets--;
md_sync_acct(bio->bi_bdev, nr_sectors);
generic_make_request(bio);
}
if (minor == MAX_DVB_MINORS) {
kfree(dvbdevfops);
kfree(dvbdev);
+ up_write(&minor_rwsem);
mutex_unlock(&dvbdev_register_lock);
return -EINVAL;
}
static bool txandrx; /* default = 0 */
module_param(txandrx, bool, 0444);
-MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
+MODULE_PARM_DESC(txandrx, "Allow simultaneous TX and RX");
static unsigned int wake_sc = 0x800F040C;
module_param(wake_sc, uint, 0644);
data->dev->tx_ir = wbcir_tx;
data->dev->priv = data;
data->dev->dev.parent = &device->dev;
+ data->dev->timeout = MS_TO_NS(100);
+ data->dev->allowed_protos = RC_TYPE_ALL;
if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
urb->context = dev;
urb->pipe = usb_rcvisocpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->interval = 1;
urb->complete = cx231xx_audio_isocirq;
urb->context = dev;
urb->pipe = usb_rcvbulkpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->complete = cx231xx_audio_bulkirq;
urb->transfer_buffer_length = sb_size;
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.urb[i] = urb;
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "Hauppauge WinTV-HVR1250",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .tuner_bus = 1,
+#endif
+ .force_bff = 1,
.input = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
.type = CX23885_VMUX_TELEVISION,
- .vmux = 0,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .amux = CX25840_AUDIO8,
.gpio0 = 0xff00,
}, {
- .type = CX23885_VMUX_DEBUG,
- .vmux = 0,
- .gpio0 = 0xff01,
- }, {
+#endif
.type = CX23885_VMUX_COMPOSITE1,
- .vmux = 1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
- .vmux = 2,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
} },
},
},
[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
.name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
+ .portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = {
+ .name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
.name = "Hauppauge WinTV-HVR1210",
}, {
.subvendor = 0x0070,
.subdevice = 0x2259,
- .card = CX23885_BOARD_HAUPPAUGE_HVR1255,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111,
}, {
.subvendor = 0x0070,
.subdevice = 0x2291,
struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
- if (command == XC2028_RESET_CLK)
+ if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
return 0;
if (command != 0) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
/* GPIO-6 I2C Gate which can isolate the demod from the bus */
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* FIXME: Implement me */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
*/
switch (dev->board) {
case CX23885_BOARD_TEVII_S470:
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
+
+ tda18271_attach(&dev->ts1.analog_fe,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
fe = vfe->dvb.frontend;
- if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)
+ if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
fe = &dev->ts1.analog_fe;
if (fe && fe->ops.tuner_ops.set_analog_params) {
int ret;
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
ret = cx23885_set_freq_via_ops(dev, f);
break;
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
#define CX23885_BOARD_TEVII_S471 35
+#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
/* ----------------------------------------------------------------------- */
-static void cx23885_std_setup(struct i2c_client *client);
+static void cx23888_std_setup(struct i2c_client *client);
int cx25840_write(struct i2c_client *client, u16 addr, u8 value)
{
finish_wait(&state->fw_wait, &wait);
destroy_workqueue(q);
- /* Call the cx23885 specific std setup func, we no longer rely on
+ /* Call the cx23888 specific std setup func, we no longer rely on
* the generic cx24840 func.
*/
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
+ else
+ cx25840_std_setup(client);
/* (re)set input */
set_input(client, state->vid_input, state->aud_input);
cx25840_write4(client, 0x410, 0xffff0dbf);
cx25840_write4(client, 0x414, 0x00137d03);
- cx25840_write4(client, 0x418, 0x01008080);
+
+ /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is
+ CHROMA_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x418, 0x01008080);
+ else
+ cx25840_write4(client, 0x418, 0x01000000);
+
cx25840_write4(client, 0x41c, 0x00000000);
- cx25840_write4(client, 0x420, 0x001c3e0f);
+
+ /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is
+ CRUSH_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x420, 0x001c3e0f);
+ else
+ cx25840_write4(client, 0x420, 0x001c8282);
+
cx25840_write4(client, 0x42c, 0x42600000);
cx25840_write4(client, 0x430, 0x0000039b);
cx25840_write4(client, 0x438, 0x00000000);
cx25840_write4(client, 0x8d0, 0x1f063870);
}
- if (is_cx2388x(state)) {
+ if (is_cx23888(state)) {
/* HVR1850 */
/* AUD_IO_CTRL - I2S Input, Parallel1*/
/* - Channel 1 src - Parallel1 (Merlin out) */
}
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
else
cx25840_std_setup(client);
if (!is_cx2583x(state))
static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
break;
case V4L2_CID_SATURATION:
- cx25840_write(client, 0x420, ctrl->val << 1);
- cx25840_write(client, 0x421, ctrl->val << 1);
+ if (is_cx23888(state)) {
+ cx25840_write(client, 0x418, ctrl->val << 1);
+ cx25840_write(client, 0x419, ctrl->val << 1);
+ } else {
+ cx25840_write(client, 0x420, ctrl->val << 1);
+ cx25840_write(client, 0x421, ctrl->val << 1);
+ }
break;
case V4L2_CID_HUE:
- cx25840_write(client, 0x422, ctrl->val);
+ if (is_cx23888(state))
+ cx25840_write(client, 0x41a, ctrl->val);
+ else
+ cx25840_write(client, 0x422, ctrl->val);
break;
default:
fmt->field = V4L2_FIELD_INTERLACED;
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
- Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
- Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4;
+ } else {
+ Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ }
- Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
- Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4;
+ } else {
+ Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ }
Vlines = fmt->height + (is_50Hz ? 4 : 7);
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, input, state->aud_input);
}
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, state->vid_input, input);
}
}
}
-static void cx23885_std_setup(struct i2c_client *client)
+static void cx23888_std_setup(struct i2c_client *client)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
v4l2_std_id std = state->std;
if (dev->board.has_dvb)
request_module("em28xx-dvb");
- if (dev->board.has_ir_i2c && !disable_ir)
+ if (dev->board.ir_codes && !disable_ir)
request_module("em28xx-rc");
}
set_gamma(gspca_dev, v4l2_ctrl_g_ctrl(sd->gamma));
set_redblue(gspca_dev, v4l2_ctrl_g_ctrl(sd->blue),
v4l2_ctrl_g_ctrl(sd->red));
- set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
- set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
- set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
- v4l2_ctrl_g_ctrl(sd->vflip));
+ if (sd->gain)
+ set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
+ if (sd->exposure)
+ set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
+ if (sd->hflip)
+ set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
+ v4l2_ctrl_g_ctrl(sd->vflip));
reg_w1(gspca_dev, 0x1007, 0x20);
reg_w1(gspca_dev, 0x1061, 0x03);
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum;
- if (!v4l2_ctrl_g_ctrl(sd->autogain))
+ if (sd->autogain == NULL || !v4l2_ctrl_g_ctrl(sd->autogain))
return;
avg_lum = atomic_read(&sd->avg_lum);
#define CSICR1_INV_DATA (1 << 3)
#define CSICR1_INV_PCLK (1 << 2)
#define CSICR1_REDGE (1 << 1)
+#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
#define SHIFT_STATFF_LEVEL 22
#define SHIFT_RXFF_LEVEL 19
u32 src_pixel;
u32 ch1_pixel;
u32 irq_flags;
+ u32 csicr1;
};
/* prp resizing parameters */
.ch1_pixel = 0x2ca00565, /* RGB565 */
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
PRP_INTR_CH1FC | PRP_INTR_LBOVF,
+ .csicr1 = 0,
}
},
{
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_PACK_DIR,
+ }
+ },
+ {
+ .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8,
+ .out_fmt = V4L2_PIX_FMT_YUV420,
+ .cfg = {
+ .channel = 2,
+ .in_fmt = PRP_CNTL_DATA_IN_YUV422,
+ .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
+ .src_pixel = 0x22000888, /* YUV422 (YUYV) */
+ .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
+ PRP_INTR_CH2FC | PRP_INTR_LBOVF |
+ PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_SWAP16_EN,
}
},
};
return ret;
}
+ csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
+
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_HSYNC_POL;
- if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
- csicr1 |= CSICR1_SWAP16_EN;
if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
csicr1 |= CSICR1_EXT_VSYNC;
if (pcdev->platform_flags & MX2_CAMERA_CCIR)
csicr1 |= CSICR1_GCLK_MODE;
if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
csicr1 |= CSICR1_INV_DATA;
- if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
- csicr1 |= CSICR1_PACK_DIR;
pcdev->csicr1 = csicr1;
return 0;
}
- if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
+ if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
+ code == V4L2_MBUS_FMT_UYVY8_2X8) {
formats++;
if (xlate) {
/*
preview_config_contrast,
NULL,
offsetof(struct prev_params, contrast),
- 0, true,
+ 0, 0, true,
}, /* OMAP3ISP_PREV_BRIGHTNESS */ {
preview_config_brightness,
NULL,
offsetof(struct prev_params, brightness),
- 0, true,
+ 0, 0, true,
},
};
unsigned int elv = prev->crop.top + prev->crop.height - 1;
u32 features;
- if (format->code == V4L2_MBUS_FMT_Y10_1X10) {
+ if (format->code != V4L2_MBUS_FMT_Y10_1X10) {
sph -= 2;
eph += 2;
slv -= 2;
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
if (pixm)
sizes[i] = max(size, pixm->plane_fmt[i].sizeimage);
else
- sizes[i] = size;
+ sizes[i] = max_t(u32, size, frame->payload[i]);
+
allocators[i] = ctx->fimc_dev->alloc_ctx;
}
static int fimc_capture_open(struct file *file)
{
struct fimc_dev *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
-
- if (ret)
- return ret;
+ int ret;
dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
- /* Return if the corresponding video mem2mem node is already opened. */
if (fimc_m2m_active(fimc))
return -EBUSY;
set_bit(ST_CAPT_BUSY, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ return ret;
- if (++fimc->vid_cap.refcnt == 1) {
- ret = fimc_pipeline_initialize(&fimc->pipeline,
- &fimc->vid_cap.vfd->entity, true);
- if (ret < 0) {
- dev_err(&fimc->pdev->dev,
- "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->vid_cap.refcnt--;
- v4l2_fh_release(file);
- clear_bit(ST_CAPT_BUSY, &fimc->state);
- return ret;
- }
- ret = fimc_capture_ctrls_create(fimc);
+ ret = v4l2_fh_open(file);
+ if (ret)
+ return ret;
- if (!ret && !fimc->vid_cap.user_subdev_api)
- ret = fimc_capture_set_default_format(fimc);
+ if (++fimc->vid_cap.refcnt != 1)
+ return 0;
+
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vid_cap.vfd->entity, true);
+ if (ret < 0) {
+ clear_bit(ST_CAPT_BUSY, &fimc->state);
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->vid_cap.refcnt--;
+ v4l2_fh_release(file);
+ return ret;
}
+ ret = fimc_capture_ctrls_create(fimc);
+
+ if (!ret && !fimc->vid_cap.user_subdev_api)
+ ret = fimc_capture_set_default_format(fimc);
+
return ret;
}
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_ctx *ctx = fimc->vid_cap.ctx;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
return fimc_fill_format(&ctx->d_frame, f);
}
struct v4l2_mbus_framefmt mf;
struct fimc_fmt *ffmt = NULL;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
fimc_capture_try_format(ctx, &pix->width, &pix->height,
NULL, &pix->pixelformat,
struct fimc_fmt *s_fmt = NULL;
int ret, i;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
if (vb2_is_busy(&fimc->vid_cap.vbq))
return -EBUSY;
pix->width = mf->width;
pix->height = mf->height;
}
+
fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix);
for (i = 0; i < ff->fmt->colplanes; i++)
- ff->payload[i] =
- (pix->width * pix->height * ff->fmt->depth[i]) / 8;
+ ff->payload[i] = pix->plane_fmt[i].sizeimage;
set_frame_bounds(ff, pix->width, pix->height);
/* Reset the composition rectangle if not yet configured */
{
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_pipeline *p = &fimc->pipeline;
+ struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR];
int ret;
if (fimc_capture_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&p->subdevs[IDX_SENSOR]->entity,
- p->m_pipeline);
+ ret = media_entity_pipeline_start(&sd->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
if (fimc->vid_cap.user_subdev_api) {
ret = fimc_pipeline_validate(fimc);
- if (ret)
+ if (ret < 0) {
+ media_entity_pipeline_stop(&sd->entity);
return ret;
+ }
}
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr",
+ .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr",
+ .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr",
.fourcc = V4L2_PIX_FMT_YUV420M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 2, 2 },
.colplanes = 3,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr, tiled",
+ .name = "YUV 4:2:0 non-contig. 2p, tiled",
.fourcc = V4L2_PIX_FMT_NV12MT,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
if (!ctrls->ready)
return;
- mutex_lock(&ctrls->handler.lock);
+ mutex_lock(ctrls->handler.lock);
v4l2_ctrl_activate(ctrls->rotate, active);
v4l2_ctrl_activate(ctrls->hflip, active);
v4l2_ctrl_activate(ctrls->vflip, active);
ctx->hflip = 0;
ctx->vflip = 0;
}
- mutex_unlock(&ctrls->handler.lock);
+ mutex_unlock(ctrls->handler.lock);
}
/* Update maximum value of the alpha color control */
pix->width = width;
for (i = 0; i < pix->num_planes; ++i) {
- u32 bpl = pix->plane_fmt[i].bytesperline;
- u32 *sizeimage = &pix->plane_fmt[i].sizeimage;
+ struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i];
+ u32 bpl = plane_fmt->bytesperline;
if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width))
bpl = pix->width; /* Planar */
if (i == 0) /* Same bytesperline for each plane. */
bytesperline = bpl;
- pix->plane_fmt[i].bytesperline = bytesperline;
- *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8;
+ plane_fmt->bytesperline = bytesperline;
+ plane_fmt->sizeimage = max((pix->width * pix->height *
+ fmt->depth[i]) / 8, plane_fmt->sizeimage);
}
}
static int fimc_lite_open(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
+ int ret;
- if (ret)
- return ret;
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
set_bit(ST_FLITE_IN_USE, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ goto done;
- if (++fimc->ref_count != 1 || fimc->out_path != FIMC_IO_DMA)
- return ret;
+ ret = v4l2_fh_open(file);
+ if (ret < 0)
+ goto done;
- ret = fimc_pipeline_initialize(&fimc->pipeline, &fimc->vfd->entity,
- true);
- if (ret < 0) {
- v4l2_err(fimc->vfd, "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->ref_count--;
- v4l2_fh_release(file);
- clear_bit(ST_FLITE_IN_USE, &fimc->state);
- }
+ if (++fimc->ref_count == 1 && fimc->out_path == FIMC_IO_DMA) {
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vfd->entity, true);
+ if (ret < 0) {
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->ref_count--;
+ v4l2_fh_release(file);
+ clear_bit(ST_FLITE_IN_USE, &fimc->state);
+ }
- fimc_lite_clear_event_counters(fimc);
+ fimc_lite_clear_event_counters(fimc);
+ }
+done:
+ mutex_unlock(&fimc->lock);
return ret;
}
static int fimc_lite_close(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) {
clear_bit(ST_FLITE_IN_USE, &fimc->state);
if (fimc->ref_count == 0)
vb2_queue_release(&fimc->vb_queue);
- return v4l2_fh_release(file);
+ ret = v4l2_fh_release(file);
+
+ mutex_unlock(&fimc->lock);
+ return ret;
}
static unsigned int fimc_lite_poll(struct file *file,
struct poll_table_struct *wait)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_poll(&fimc->vb_queue, file, wait);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return POLL_ERR;
+
+ ret = vb2_poll(&fimc->vb_queue, file, wait);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static int fimc_lite_mmap(struct file *file, struct vm_area_struct *vma)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_mmap(&fimc->vb_queue, vma);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
+ ret = vb2_mmap(&fimc->vb_queue, vma);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static const struct v4l2_file_operations fimc_lite_fops = {
if (fimc_lite_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ ret = media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
ret = fimc_pipeline_validate(fimc);
if (ret) {
return 0;
ret = fimc_lite_stop_capture(fimc, suspend);
- if (ret)
+ if (ret < 0 || !fimc_lite_active(fimc))
return ret;
return fimc_pipeline_shutdown(&fimc->pipeline);
int fimc_pipeline_shutdown(struct fimc_pipeline *p)
{
- struct media_entity *me = &p->subdevs[IDX_SENSOR]->entity;
+ struct media_entity *me;
int ret;
+ if (!p || !p->subdevs[IDX_SENSOR])
+ return -EINVAL;
+
+ me = &p->subdevs[IDX_SENSOR]->entity;
mutex_lock(&me->parent->graph_mutex);
ret = __fimc_pipeline_shutdown(p);
mutex_unlock(&me->parent->graph_mutex);
* @source: the source entity to create links to all fimc entities from
* @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
* @pad: the source entity pad index
- * @fimc_id: index of the fimc device for which link should be enabled
+ * @link_mask: bitmask of the fimc devices for which link should be enabled
*/
static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
struct media_entity *source,
struct v4l2_subdev *sensor,
- int pad, int fimc_id)
+ int pad, int link_mask)
{
struct fimc_sensor_info *s_info;
struct media_entity *sink;
if (!fmd->fimc[i]->variant->has_cam_if)
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0;
sink = &fmd->fimc[i]->vid_cap.subdev.entity;
ret = media_entity_create_link(source, pad, sink,
if (!fmd->fimc_lite[i])
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ if (link_mask & (1 << (i + FIMC_MAX_DEVS)))
+ flags = MEDIA_LNK_FL_ENABLED;
+ else
+ flags = 0;
sink = &fmd->fimc_lite[i]->subdev.entity;
ret = media_entity_create_link(source, pad, sink,
struct s5p_fimc_isp_info *pdata;
struct fimc_sensor_info *s_info;
struct media_entity *source, *sink;
- int i, pad, fimc_id = 0;
- int ret = 0;
- u32 flags;
+ int i, pad, fimc_id = 0, ret = 0;
+ u32 flags, link_mask = 0;
for (i = 0; i < fmd->num_sensors; i++) {
if (fmd->sensor[i].subdev == NULL)
if (source == NULL)
continue;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
- pad, fimc_id++);
+ pad, link_mask);
}
- fimc_id = 0;
for (i = 0; i < ARRAY_SIZE(fmd->csis); i++) {
if (fmd->csis[i].sd == NULL)
continue;
source = &fmd->csis[i].sd->entity;
pad = CSIS_PAD_SOURCE;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, NULL,
- pad, fimc_id++);
+ pad, link_mask);
}
/* Create immutable links between each FIMC's subdev and video node */
}
static int __fimc_md_set_camclk(struct fimc_md *fmd,
- struct fimc_sensor_info *s_info,
- bool on)
+ struct fimc_sensor_info *s_info,
+ bool on)
{
struct s5p_fimc_isp_info *pdata = s_info->pdata;
struct fimc_camclk_info *camclk;
if (WARN_ON(pdata->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL)
return -EINVAL;
- if (s_info->clk_on == on)
- return 0;
camclk = &fmd->camclk[pdata->clk_id];
- dbg("camclk %d, f: %lu, clk: %p, on: %d",
- pdata->clk_id, pdata->clk_frequency, camclk, on);
+ dbg("camclk %d, f: %lu, use_count: %d, on: %d",
+ pdata->clk_id, pdata->clk_frequency, camclk->use_count, on);
if (on) {
if (camclk->use_count > 0 &&
clk_set_rate(camclk->clock, pdata->clk_frequency);
camclk->frequency = pdata->clk_frequency;
ret = clk_enable(camclk->clock);
+ dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
+ clk_get_rate(camclk->clock));
}
- s_info->clk_on = 1;
- dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
- clk_get_rate(camclk->clock));
-
return ret;
}
if (--camclk->use_count == 0) {
clk_disable(camclk->clock);
- s_info->clk_on = 0;
dbg("Disabled camclk %d", pdata->clk_id);
}
return ret;
* devices to which sensors can be attached, either directly or through
* the MIPI CSI receiver. The clock is allowed here to be used by
* multiple sensors concurrently if they use same frequency.
- * The per sensor subdev clk_on attribute helps to synchronize accesses
- * to the sclk_cam clocks from the video and media device nodes.
* This function should only be called when the graph mutex is held.
*/
int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
* @pdata: sensor's atrributes passed as media device's platform data
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
- * @clk_on: sclk_cam clock's state associated with this subdev
*
* This data structure applies to image sensor and the writeback subdevs.
*/
struct s5p_fimc_isp_info *pdata;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
- bool clk_on;
};
/**
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_dec_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
}
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_enc_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
+ select IRQ_DOMAIN
default n
help
Say yes here if you want support for Texas Instruments TWL6040 audio
+++ /dev/null
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Shared definitions and data structures for the AB5500 MFD driver
- */
-
-/* Read/write operation values. */
-#define AB5500_PERM_RD (0x01)
-#define AB5500_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB5500_PERM_RO (AB5500_PERM_RD)
-#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
-
-#define AB5500_MASK_BASE (0x60)
-#define AB5500_MASK_END (0x79)
-#define AB5500_CHIP_ID (0x20)
-
-/**
- * struct ab5500_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab5500_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab5500_i2c_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_ranges {
- u8 nranges;
- u8 bankid;
- const struct ab5500_reg_range *range;
-};
-
-/**
- * struct ab5500_i2c_banks
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_banks {
- u8 nbanks;
- const struct ab5500_i2c_ranges *bank;
-};
-
-/**
- * struct ab5500_bank
- * @slave_addr: I2C slave_addr found in AB5500 specification
- * @name: Documentation name of the bank. For reference
- */
-struct ab5500_bank {
- u8 slave_addr;
- const char *name;
-};
-
-static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
- [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
- [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
- [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
- [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
- [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
- [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
- [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
- [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
- [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
- [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
- [AB5500_BANK_FG_BATTCOM_ACC] = {
- AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
- [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
- [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
- [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
- [AB5500_BANK_AUDIO_HEADSETUSB] = {
- AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
-};
-
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
- u8 *value);
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues);
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 24,
+ .write_flag_mask = 0x80,
.max_register = MC13XXX_NUMREGS,
.cache_type = REGCACHE_NONE,
+ .use_single_rw = 1,
+};
+
+static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0};
+ unsigned char r[4];
+ unsigned char *p = val;
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer t = {
+ .tx_buf = w,
+ .rx_buf = r,
+ .len = 4,
+ };
+
+ struct spi_message m;
+ int ret;
+
+ if (val_size != 3 || reg_size != 1)
+ return -ENOTSUPP;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(spi, &m);
+
+ memcpy(p, &r[1], 3);
+
+ return ret;
+}
+
+static int mc13xxx_spi_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ if (count != 4)
+ return -ENOTSUPP;
+
+ return spi_write(spi, data, count);
+}
+
+/*
+ * We cannot use regmap-spi generic bus implementation here.
+ * The MC13783 chip will get corrupted if CS signal is deasserted
+ * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller
+ * has the following errata (DSPhl22960):
+ * "The CSPI negates SS when the FIFO becomes empty with
+ * SSCTL= 0. Software cannot guarantee that the FIFO will not
+ * drain because of higher priority interrupts and the
+ * non-realtime characteristics of the operating system. As a
+ * result, the SS will negate before all of the data has been
+ * transferred to/from the peripheral."
+ * We workaround this by accessing the SPI controller with a
+ * single transfert.
+ */
+
+static struct regmap_bus regmap_mc13xxx_bus = {
+ .write = mc13xxx_spi_write,
+ .read = mc13xxx_spi_read,
};
static int mc13xxx_spi_probe(struct spi_device *spi)
dev_set_drvdata(&spi->dev, mc13xxx);
spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
- spi->bits_per_word = 32;
mc13xxx->dev = &spi->dev;
mutex_init(&mc13xxx->lock);
- mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config);
+ mc13xxx->regmap = regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev,
+ &mc13xxx_regmap_spi_config);
+
if (IS_ERR(mc13xxx->regmap)) {
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
+#include <linux/gpio.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
- spin_lock_irqsave(&omap->lock, flags);
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
}
spin_unlock_irqrestore(&omap->lock, flags);
+
+ if (pdata->ehci_data->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[1], 1);
+ }
+
pm_runtime_put_sync(dev);
}
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ }
+}
+
/**
* usbhs_omap_probe - initialize TI-based HCDs
goto end_probe;
err_alloc:
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
err_tll:
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
}
}
- ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq,
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
+ addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
+ reg = PALMAS_INT_CTRL_INT_CLEAR;
+
+ regmap_write(palmas->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
}
+ children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata;
+ children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata);
+
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
NULL, regmap_irq_chip_get_base(palmas->irq_data));
{ "twl6035", },
{ "twl6037", },
{ "tps65913", },
+ { /* end */ }
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ spin_lock(&part_uv->flags_lock);
part_uv->flags &= ~XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ spin_unlock(&part_uv->flags_lock);
part_uv->activate_gru_mq_desc_gpa =
msg->activate_gru_mq_desc_gpa;
}
goto egpioreq;
ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- cd->label, host);
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT, cd->label, host);
if (ret < 0)
goto eirqreq;
card->ext_csd.generic_cmd6_time);
}
- if (err)
- pr_err("%s: power class selection for ext_csd_bus_width %d"
- " failed\n", mmc_hostname(card->host), bus_width);
-
return err;
}
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to bus width %d"
+ " failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
}
/*
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width, ddr);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
*/
memset(chip->oob_poi, ~0, mtd->oobsize);
chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
-
- read_page_swap_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
}
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
exit_nfc:
return ret;
}
static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
+static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u32 *t = trg;
+ const __iomem u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ *t++ = __raw_readl(s++);
+}
+
+static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+ int i;
+ u32 __iomem *t = trg;
+ const u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ __raw_writel(*s++, t++);
+}
+
static int check_int_v3(struct mxc_nand_host *host)
{
uint32_t tmp;
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
/* Wait for operation to complete */
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
if (this->options & NAND_BUSWIDTH_16) {
/* compress the ID info */
if (bfrom) {
for (i = 0; i < n - 1; i++)
- memcpy_fromio(d + i * j, s + i * t, j);
+ memcpy32_fromio(d + i * j, s + i * t, j);
/* the last section */
- memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
+ memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
} else {
for (i = 0; i < n - 1; i++)
- memcpy_toio(&s[i * t], &d[i * j], j);
+ memcpy32_toio(&s[i * t], &d[i * j], j);
/* the last section */
- memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+ memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
}
}
host->devtype_data->send_page(mtd, NFC_OUTPUT);
- memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize);
+ memcpy32_fromio(host->data_buf, host->main_area0,
+ mtd->writesize);
copy_spare(mtd, true);
break;
break;
case NAND_CMD_PAGEPROG:
- memcpy_toio(host->main_area0, host->data_buf, mtd->writesize);
+ memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
host->devtype_data->send_page(mtd, NFC_INPUT);
host->devtype_data->send_cmd(host, command, true);
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
return kstrdup(buf, GFP_KERNEL);
}
-static uint64_t divide(uint64_t n, uint32_t d)
-{
- do_div(n, d);
- return n;
-}
-
/*
* Initialize the nandsim structure.
*
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
- ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
if (!rptwear)
return 0;
- wear_eb_count = divide(mtd->size, mtd->erasesize);
+ wear_eb_count = div_u64(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
NS_ERR("Too many erase blocks for wear reporting\n");
}
EXPORT_SYMBOL(of_find_node_with_property);
-static const struct of_device_id *of_match_compat(const struct of_device_id *matches,
- const char *compat)
-{
- while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
- const char *cp = matches->compatible;
- int len = strlen(cp);
-
- if (len > 0 && of_compat_cmp(compat, cp, len) == 0)
- return matches;
-
- matches++;
- }
-
- return NULL;
-}
-
/**
* of_match_node - Tell if an device_node has a matching of_match structure
* @matches: array of of device match structures to search in
const struct of_device_id *of_match_node(const struct of_device_id *matches,
const struct device_node *node)
{
- struct property *prop;
- const char *cp;
-
if (!matches)
return NULL;
- of_property_for_each_string(node, "compatible", prop, cp) {
- const struct of_device_id *match = of_match_compat(matches, cp);
- if (match)
- return match;
- }
-
while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
int match = 1;
if (matches->name[0])
if (matches->type[0])
match &= node->type
&& !strcmp(matches->type, node->type);
- if (match && !matches->compatible[0])
+ if (matches->compatible[0])
+ match &= of_device_is_compatible(node,
+ matches->compatible);
+ if (match)
return matches;
matches++;
}
for(; lookup->compatible != NULL; lookup++) {
if (!of_device_is_compatible(np, lookup->compatible))
continue;
- if (of_address_to_resource(np, 0, &res))
- continue;
- if (res.start != lookup->phys_addr)
- continue;
+ if (!of_address_to_resource(np, 0, &res))
+ if (res.start != lookup->phys_addr)
+ continue;
pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
return lookup;
}
pci_pm_set_unknown_state(pci_dev);
+ /*
+ * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's
+ * PCI COMMAND register isn't 0, the BIOS assumes that the controller
+ * hasn't been quiesced and tries to turn it off. If the controller
+ * is already in D3, this can hang or cause memory corruption.
+ *
+ * Since the value of the COMMAND register doesn't matter once the
+ * device has been suspended, we can safely set it to 0 here.
+ */
+ if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
return 0;
}
if (target_state == PCI_POWER_ERROR)
return -EIO;
- /* Some devices mustn't be in D3 during system sleep */
- if (target_state == PCI_D3hot &&
- (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
- return 0;
-
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
-/*
- * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
- * ASUS motherboards will cause memory corruption or a system crash
- * if they are in D3 while the system is put into S3 sleep.
- */
-static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
-{
- const char *sys_info;
- static const char good_Asus_board[] = "P8Z68-V";
-
- if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
- return;
- if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
- return;
- sys_info = dmi_get_system_info(DMI_BOARD_NAME);
- if (sys_info && memcmp(sys_info, good_Asus_board,
- sizeof(good_Asus_board) - 1) == 0)
- return;
-
- dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
- dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
- device_set_wakeup_capable(&dev->dev, false);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
-
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
- int ret, output_uV, input_uV, total_uA_load = 0;
+ int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+
mutex_lock(&rdev->mutex);
/*
goto out;
}
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ /* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
config REMOTEPROC
tristate
depends on EXPERIMENTAL
+ select FW_CONFIG
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
+ depends on EXPERIMENTAL
depends on ARCH_OMAP4
depends on OMAP_IOMMU
select REMOTEPROC
rpdev->id.name);
}
+/**
+ * __ept_release() - deallocate an rpmsg endpoint
+ * @kref: the ept's reference count
+ *
+ * This function deallocates an ept, and is invoked when its @kref refcount
+ * drops to zero.
+ *
+ * Never invoke this function directly!
+ */
+static void __ept_release(struct kref *kref)
+{
+ struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
+ refcount);
+ /*
+ * At this point no one holds a reference to ept anymore,
+ * so we can directly free it
+ */
+ kfree(ept);
+}
+
/* for more info, see below documentation of rpmsg_create_ept() */
static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb,
return NULL;
}
+ kref_init(&ept->refcount);
+ mutex_init(&ept->cb_lock);
+
ept->rpdev = rpdev;
ept->cb = cb;
ept->priv = priv;
idr_remove(&vrp->endpoints, request);
free_ept:
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ kref_put(&ept->refcount, __ept_release);
return NULL;
}
static void
__rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
{
+ /* make sure new inbound messages can't find this ept anymore */
mutex_lock(&vrp->endpoints_lock);
idr_remove(&vrp->endpoints, ept->addr);
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ /* make sure in-flight inbound messages won't invoke cb anymore */
+ mutex_lock(&ept->cb_lock);
+ ept->cb = NULL;
+ mutex_unlock(&ept->cb_lock);
+
+ kref_put(&ept->refcount, __ept_release);
}
/**
/* use the dst addr to fetch the callback of the appropriate user */
mutex_lock(&vrp->endpoints_lock);
+
ept = idr_find(&vrp->endpoints, msg->dst);
+
+ /* let's make sure no one deallocates ept while we use it */
+ if (ept)
+ kref_get(&ept->refcount);
+
mutex_unlock(&vrp->endpoints_lock);
- if (ept && ept->cb)
- ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
- else
+ if (ept) {
+ /* make sure ept->cb doesn't go away while we use it */
+ mutex_lock(&ept->cb_lock);
+
+ if (ept->cb)
+ ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
+ msg->src);
+
+ mutex_unlock(&ept->cb_lock);
+
+ /* farewell, ept, we don't need you anymore */
+ kref_put(&ept->refcount, __ept_release);
+ } else
dev_warn(dev, "msg received with no recepient\n");
/* publish the real size of the buffer */
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
+#include <linux/of.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
#define AB8500_RTC_CC_CONF_REG 0x01
}
err = request_threaded_irq(irq, NULL, rtc_alarm_handler,
- IRQF_NO_SUSPEND, "ab8500-rtc", rtc);
+ IRQF_NO_SUSPEND | IRQF_ONESHOT, "ab8500-rtc", rtc);
if (err < 0) {
rtc_device_unregister(rtc);
return err;
platform_set_drvdata(pdev, rtc);
-
err = ab8500_sysfs_rtc_register(&pdev->dev);
if (err) {
dev_err(&pdev->dev, "sysfs RTC failed to register\n");
return 0;
}
+static const struct of_device_id ab8500_rtc_match[] = {
+ { .compatible = "stericsson,ab8500-rtc", },
+ {}
+};
+
static struct platform_driver ab8500_rtc_driver = {
.driver = {
.name = "ab8500-rtc",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_rtc_match,
},
.probe = ab8500_rtc_probe,
.remove = __devexit_p(ab8500_rtc_remove),
struct platform_device *pdev = dev_id;
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long flags;
u32 status;
u32 events = 0;
- spin_lock_irq(&pdata->rtc->irq_lock);
+ spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
/* clear interrupt sources */
writew(status, ioaddr + RTC_RTCISR);
events |= (RTC_PF | RTC_IRQF);
rtc_update_irq(pdata->rtc, 1, events);
- spin_unlock_irq(&pdata->rtc->irq_lock);
+ spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
return IRQ_HANDLED;
}
clk_disable(config->clk);
clk_put(config->clk);
iounmap(config->ioaddr);
- kfree(config);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res)
release_mem_region(res->start, resource_size(res));
platform_set_drvdata(pdev, NULL);
rtc_device_unregister(config->rtc);
+ kfree(config);
return 0;
}
}
ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
dev_name(&rtc->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
- memcpy(&resp->ending_fis[0], r+16, 24);
+ memcpy(&resp->ending_fis[0], r+16, ATA_RESP_FIS_SIZE);
ts->buf_valid_size = sizeof(*resp);
}
}
struct pci_dev *pcidev;
struct net_device *netdev;
void __iomem *regview;
+ resource_size_t reg_base;
u32 age;
unsigned long cnic_dev_type;
goto arm_cq;
}
- reg_base = ep->hba->netdev->base_addr;
if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
(ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
/* 5709 device in normal node and 5706/5708 devices */
reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
- ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+ ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off,
MB_KERNEL_CTX_SIZE);
if (!ep->qp.ctx_base)
return -ENOMEM;
bnx2i_identify_device(hba);
bnx2i_setup_host_queue_size(hba, shost);
+ hba->reg_base = pci_resource_start(hba->pcidev, 0);
if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr,
- BNX2_MQ_CONFIG2);
+ hba->regview = pci_iomap(hba->pcidev, 0, BNX2_MQ_CONFIG2);
if (!hba->regview)
goto ioreg_map_err;
} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+ hba->regview = pci_iomap(hba->pcidev, 0, 4096);
if (!hba->regview)
goto ioreg_map_err;
}
bnx2i_free_mp_bdt(hba);
mp_bdt_mem_err:
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
ioreg_map_err:
pci_dev_put(hba->pcidev);
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
bnx2i_free_mp_bdt(hba);
if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
((stat->stat == SAM_STAT_CHECK_CONDITION &&
dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
- ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
+ memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
if (!link->sactive) {
- qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
} else {
- link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
if (unlikely(link->eh_info.err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
}
qc->flags |= ATA_QCFLAG_FAILED;
}
- dev->sata_dev.tf.feature = 0x04; /* status err */
- dev->sata_dev.tf.command = ATA_ERR;
+ dev->sata_dev.fis[3] = 0x04; /* status err */
+ dev->sata_dev.fis[2] = ATA_ERR;
}
}
{
struct domain_device *dev = qc->ap->private_data;
- memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf));
+ ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
return true;
}
}
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
-void __init udbg_init_debug_opal(void)
+void __init udbg_init_debug_opal_raw(void)
{
u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
hvc_opal_privs[index] = &hvc_opal_boot_priv;
goto retry;
}
if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+ clear_bit(WDM_READ, &desc->flags);
spin_unlock_irq(&desc->iuspin);
goto retry;
}
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
{
return hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_INACTIVE;
+ (((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_INACTIVE) ||
+ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_COMP_MOD)) ;
}
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
*
* See https://bugzilla.kernel.org/show_bug.cgi?id=41752
*/
- if (hub_port_inactive(hub, portstatus)) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
int ret;
if ((portchange & USB_PORT_STAT_C_CONNECTION))
/* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE)
- == USB_SS_PORT_LS_SS_INACTIVE) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
-
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
}
}
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+ /* update status field */
+ *status |= pls;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
- */
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_hub_report_link_state(&status, temp);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
+ /* If we get two back-to-back stalls, and the first stalled transfer
+ * ends just before a link TRB, the dequeue pointer will be left on
+ * the link TRB by the code in the while loop. So we have to update
+ * the dequeue pointer one segment further, or we'll jump off
+ * the segment into la-la-land.
+ */
+ if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+ ep_ring->deq_seg = ep_ring->deq_seg->next;
+ ep_ring->dequeue = ep_ring->deq_seg->trbs;
+ }
+
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM 0x7101
+#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_FP_1COM 0x0003
+#define MEDIATEK_PRODUCT_FP_2COM 0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033
/* Cellient products */
#define CELLIENT_VENDOR_ID 0x2692
.reserved = BIT(1),
};
+static const struct option_blacklist_info net_intf2_blacklist = {
+ .reserved = BIT(2),
+};
+
static const struct option_blacklist_info net_intf3_blacklist = {
.reserved = BIT(3),
};
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
#include <linux/io.h>
#include <linux/device.h>
#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
#include <video/omapdss.h>
#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
/* PLATFORM DEVICE */
+static int omap_dss_pm_notif(struct notifier_block *b, unsigned long v, void *d)
+{
+ DSSDBG("pm notif %lu\n", v);
+
+ switch (v) {
+ case PM_SUSPEND_PREPARE:
+ DSSDBG("suspending displays\n");
+ return dss_suspend_all_devices();
+
+ case PM_POST_SUSPEND:
+ DSSDBG("resuming displays\n");
+ return dss_resume_all_devices();
+
+ default:
+ return 0;
+ }
+}
+
+static struct notifier_block omap_dss_pm_notif_block = {
+ .notifier_call = omap_dss_pm_notif,
+};
+
static int __init omap_dss_probe(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
else if (pdata->default_device)
core.default_display_name = pdata->default_device->name;
+ register_pm_notifier(&omap_dss_pm_notif_block);
+
return 0;
err_debugfs:
static int omap_dss_remove(struct platform_device *pdev)
{
+ unregister_pm_notifier(&omap_dss_pm_notif_block);
+
dss_uninitialize_debugfs();
dss_uninit_overlays(pdev);
dss_disable_all_devices();
}
-static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
-{
- DSSDBG("suspend %d\n", state.event);
-
- return dss_suspend_all_devices();
-}
-
-static int omap_dss_resume(struct platform_device *pdev)
-{
- DSSDBG("resume\n");
-
- return dss_resume_all_devices();
-}
-
static struct platform_driver omap_dss_driver = {
.remove = omap_dss_remove,
.shutdown = omap_dss_shutdown,
- .suspend = omap_dss_suspend,
- .resume = omap_dss_resume,
.driver = {
.name = "omapdss",
.owner = THIS_MODULE,
DSSDBG("dispc_runtime_put\n");
r = pm_runtime_put_sync(&dispc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
DSSDBG("dsi_runtime_put\n");
r = pm_runtime_put_sync(&dsi->pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
/* source clock for DSI PLL. this could also be PCLKFREE */
DSSDBG("dss_runtime_put\n");
r = pm_runtime_put_sync(&dss.pdev->dev);
- WARN_ON(r < 0 && r != -EBUSY);
+ WARN_ON(r < 0 && r != -ENOSYS && r != -EBUSY);
}
/* DEBUGFS */
DSSDBG("hdmi_runtime_put\n");
r = pm_runtime_put_sync(&hdmi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
DSSDBG("rfbi_runtime_put\n");
r = pm_runtime_put_sync(&rfbi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
void rfbi_bus_lock(void)
DSSDBG("venc_runtime_put\n");
r = pm_runtime_put_sync(&venc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static const struct venc_config *venc_timings_to_config(
struct task_struct *thread;
/* Waiting for host to ack the pages we released. */
- struct completion acked;
+ wait_queue_head_t acked;
/* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
static void balloon_ack(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (vb)
- complete(&vb->acked);
+ wake_up(&vb->acked);
}
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
struct scatterlist sg;
+ unsigned int len;
sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
- init_completion(&vb->acked);
-
/* We should always be able to add one buffer to an empty queue. */
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
- wait_for_completion(&vb->acked);
+ wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
static void set_page_pfns(u32 pfns[], struct page *page)
*/
static void stats_request(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (!vb)
- return;
vb->need_stats_update = 1;
wake_up(&vb->config_change);
}
{
struct virtqueue *vq;
struct scatterlist sg;
+ unsigned int len;
vb->need_stats_update = 0;
update_balloon_stats(vb);
vq = vb->stats_vq;
+ if (!virtqueue_get_buf(vq, &len))
+ return;
sg_init_one(&sg, vb->stats, sizeof(vb->stats));
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
INIT_LIST_HEAD(&vb->pages);
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
+ init_waitqueue_head(&vb->acked);
vb->vdev = vdev;
vb->need_stats_update = 0;
static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block, int size)
{
+ int ret;
+ struct buffer_head *bh;
+
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
(size < 512 || size > PAGE_SIZE))) {
return NULL;
}
- for (;;) {
- struct buffer_head * bh;
- int ret;
+retry:
+ bh = __find_get_block(bdev, block, size);
+ if (bh)
+ return bh;
+ ret = grow_buffers(bdev, block, size);
+ if (ret == 0) {
+ free_more_memory();
+ goto retry;
+ } else if (ret > 0) {
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
-
- ret = grow_buffers(bdev, block, size);
- if (ret < 0)
- return NULL;
- if (ret == 0)
- free_more_memory();
}
+ return NULL;
}
/*
fat_encode_fh(struct inode *inode, __u32 *fh, int *lenp, struct inode *parent)
{
int len = *lenp;
- u32 ipos_h, ipos_m, ipos_l;
+ struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
+ loff_t i_pos;
if (len < 5) {
*lenp = 5;
return 255; /* no room */
}
- ipos_h = MSDOS_I(inode)->i_pos >> 8;
- ipos_m = (MSDOS_I(inode)->i_pos & 0xf0) << 24;
- ipos_l = (MSDOS_I(inode)->i_pos & 0x0f) << 28;
+ i_pos = fat_i_pos_read(sbi, inode);
*lenp = 5;
fh[0] = inode->i_ino;
fh[1] = inode->i_generation;
- fh[2] = ipos_h;
- fh[3] = ipos_m | MSDOS_I(inode)->i_logstart;
- fh[4] = ipos_l;
+ fh[2] = i_pos >> 8;
+ fh[3] = ((i_pos & 0xf0) << 24) | MSDOS_I(inode)->i_logstart;
+ fh[4] = (i_pos & 0x0f) << 28;
if (parent)
fh[4] |= MSDOS_I(parent)->i_logstart;
return 3;
case F_WRLCK:
return generic_add_lease(filp, arg, flp);
default:
- BUG();
+ return -EINVAL;
}
}
EXPORT_SYMBOL(generic_setlease);
list_for_each_entry_safe(req, tmp, &reqs, wb_list) {
if (!nfs_pageio_add_request(&desc, req)) {
+ nfs_list_remove_request(req);
nfs_list_add_request(req, &failed);
spin_lock(cinfo.lock);
dreq->flags = 0;
}
nfs_pageio_complete(&desc);
- while (!list_empty(&failed))
+ while (!list_empty(&failed)) {
+ req = nfs_list_entry(failed.next);
+ nfs_list_remove_request(req);
nfs_unlock_and_release_request(req);
+ }
if (put_dreq(dreq))
nfs_direct_write_complete(dreq, dreq->inode);
dfprintk(MOUNT, "--> nfs4_try_mount()\n");
+ mount_info->fill_super = nfs4_fill_super;
+
export_path = data->nfs_server.export_path;
data->nfs_server.export_path = "/";
root_mnt = nfs_do_root_mount(&nfs4_remote_fs_type, flags, mount_info,
if (ret < 0)
mlog_errno(ret);
- if (file->f_flags & O_SYNC)
+ if (file && (file->f_flags & O_SYNC))
handle->h_sync = 1;
ocfs2_commit_trans(osb, handle);
/* prevent the page from being discarded on memory pressure */
SetPageDirty(page);
+ SetPageUptodate(page);
unlock_page(page);
put_page(page);
unsigned long size,
unsigned long align,
unsigned long goal);
+void *___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+ unsigned long size,
+ unsigned long align,
+ unsigned long goal,
+ unsigned long limit);
extern void *__alloc_bootmem_low(unsigned long size,
unsigned long align,
unsigned long goal);
/* Gpio pin is open source */
#define GPIOF_OPEN_SOURCE (1 << 3)
-#define GPIOF_EXPORT (1 << 2)
-#define GPIOF_EXPORT_CHANGEABLE (1 << 3)
+#define GPIOF_EXPORT (1 << 4)
+#define GPIOF_EXPORT_CHANGEABLE (1 << 5)
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
* @lock: lock protecting the base and associated clock bases
* and timers
* @active_bases: Bitfield to mark bases with active timers
+ * @clock_was_set: Indicates that clock was set from irq context.
* @expires_next: absolute time of the next event which was scheduled
* via clock_set_next_event()
* @hres_active: State of high resolution mode
*/
struct hrtimer_cpu_base {
raw_spinlock_t lock;
- unsigned long active_bases;
+ unsigned int active_bases;
+ unsigned int clock_was_set;
#ifdef CONFIG_HIGH_RES_TIMERS
ktime_t expires_next;
int hres_active;
# define MONOTONIC_RES_NSEC HIGH_RES_NSEC
# define KTIME_MONOTONIC_RES KTIME_HIGH_RES
+extern void clock_was_set_delayed(void);
+
#else
# define MONOTONIC_RES_NSEC LOW_RES_NSEC
{
return 0;
}
+
+static inline void clock_was_set_delayed(void) { }
+
#endif
extern void clock_was_set(void);
extern ktime_t ktime_get_real(void);
extern ktime_t ktime_get_boottime(void);
extern ktime_t ktime_get_monotonic_offset(void);
+extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
phys_addr_t size, phys_addr_t align, int nid);
phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
phys_addr_t size, phys_addr_t align);
-int memblock_free_reserved_regions(void);
-int memblock_reserve_reserved_regions(void);
-
+phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr);
void memblock_allow_resize(void);
int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid);
int memblock_add(phys_addr_t base, phys_addr_t size);
range, including holes */
int node_id;
wait_queue_head_t kswapd_wait;
- struct task_struct *kswapd;
+ struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */
int kswapd_max_order;
enum zone_type classzone_idx;
} pg_data_t;
PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
/* Provide indication device is assigned by a Virtual Machine Manager */
PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
- /* Device causes system crash if in D3 during S3 sleep */
- PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
};
enum pci_irq_reroute_variant {
/* Internal to kernel */
extern void rcu_sched_qs(int cpu);
extern void rcu_bh_qs(int cpu);
-extern void rcu_preempt_note_context_switch(void);
extern void rcu_check_callbacks(int cpu, int user);
struct notifier_block;
extern void rcu_idle_enter(void);
#ifdef CONFIG_TINY_RCU
+static inline void rcu_preempt_note_context_switch(void)
+{
+}
+
static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
#else /* #ifdef CONFIG_TINY_RCU */
+void rcu_preempt_note_context_switch(void);
int rcu_preempt_needs_cpu(void);
static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
static inline void rcu_note_context_switch(int cpu)
{
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch();
}
/*
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
/* The feature bitmap for virtio rpmsg */
#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
* @rpdev: rpmsg channel device
+ * @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
+ * @cb_lock: must be taken before accessing/changing @cb
* @addr: local rpmsg address
* @priv: private data for the driver's use
*
*/
struct rpmsg_endpoint {
struct rpmsg_channel *rpdev;
+ struct kref refcount;
rpmsg_rx_cb_t cb;
+ struct mutex cb_lock;
u32 addr;
void *priv;
};
INIT_LIST_HEAD(&p->rcu_node_entry);
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
- if (prev->rcu_read_lock_nesting != 0)
- rcu_preempt_note_context_switch();
-}
-
#else
static inline void rcu_copy_process(struct task_struct *p)
{
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
-}
-
#endif
#ifdef CONFIG_SMP
}
#endif
+#ifdef CONFIG_NO_HZ
+void calc_load_enter_idle(void);
+void calc_load_exit_idle(void);
+#else
+static inline void calc_load_enter_idle(void) { }
+static inline void calc_load_exit_idle(void) { }
+#endif /* CONFIG_NO_HZ */
+
#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
{
ATAPI_COMMAND_SET = 1,
};
+#define ATA_RESP_FIS_SIZE 24
+
struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
struct ata_port *ap;
struct ata_host ata_host;
- struct ata_taskfile tf;
+ u8 fis[ATA_RESP_FIS_SIZE];
};
enum {
*/
struct ata_task_resp {
u16 frame_len;
- u8 ending_fis[24]; /* dev to host or data-in */
+ u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */
};
#define SAS_STATUS_BUF_SIZE 96
static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
+ struct scsi_driver **sdp;
+
if (!cmd->request->rq_disk)
return NULL;
- return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+ sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
+ if (!sdp)
+ return NULL;
+
+ return *sdp;
}
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
mutex_unlock(&cgroup_mutex);
/*
- * We want to drop the active superblock reference from the
- * cgroup creation after all the dentry refs are gone -
- * kill_sb gets mighty unhappy otherwise. Mark
- * dentry->d_fsdata with cgroup_diput() to tell
- * cgroup_d_release() to call deactivate_super().
+ * Drop the active superblock reference that we took when we
+ * created the cgroup
*/
- dentry->d_fsdata = cgroup_diput;
+ deactivate_super(cgrp->root->sb);
/*
* if we're getting rid of the cgroup, refcount should ensure
return 1;
}
-static void cgroup_d_release(struct dentry *dentry)
-{
- /* did cgroup_diput() tell me to deactivate super? */
- if (dentry->d_fsdata == cgroup_diput)
- deactivate_super(dentry->d_sb);
-}
-
static void remove_dir(struct dentry *d)
{
struct dentry *parent = dget(d->d_parent);
static const struct dentry_operations cgroup_dops = {
.d_iput = cgroup_diput,
.d_delete = cgroup_delete,
- .d_release = cgroup_d_release,
};
struct inode *inode =
{
struct cgroup_subsys_state *css =
container_of(work, struct cgroup_subsys_state, dput_work);
+ struct dentry *dentry = css->cgroup->dentry;
+ struct super_block *sb = dentry->d_sb;
- dput(css->cgroup->dentry);
+ atomic_inc(&sb->s_active);
+ dput(dentry);
+ deactivate_super(sb);
}
static void init_cgroup_css(struct cgroup_subsys_state *css,
}
err = arch_dup_task_struct(tsk, orig);
- if (err)
- goto out;
+ /*
+ * We defer looking at err, because we will need this setup
+ * for the clean up path to work correctly.
+ */
tsk->stack = ti;
-
setup_thread_stack(tsk, orig);
+
+ if (err)
+ goto out;
+
clear_user_return_notifier(tsk);
clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
return 0;
}
+static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
+{
+ ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
+ ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
+
+ return ktime_get_update_offsets(offs_real, offs_boot);
+}
+
/*
* Retrigger next event is called after clock was set
*
static void retrigger_next_event(void *arg)
{
struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
- struct timespec realtime_offset, xtim, wtm, sleep;
if (!hrtimer_hres_active())
return;
- /* Optimized out for !HIGH_RES */
- get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
- set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
-
- /* Adjust CLOCK_REALTIME offset */
raw_spin_lock(&base->lock);
- base->clock_base[HRTIMER_BASE_REALTIME].offset =
- timespec_to_ktime(realtime_offset);
- base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
- timespec_to_ktime(sleep);
-
+ hrtimer_update_base(base);
hrtimer_force_reprogram(base, 0);
raw_spin_unlock(&base->lock);
}
base->clock_base[i].resolution = KTIME_HIGH_RES;
tick_setup_sched_timer();
-
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
local_irq_restore(flags);
return 1;
}
+/*
+ * Called from timekeeping code to reprogramm the hrtimer interrupt
+ * device. If called from the timer interrupt context we defer it to
+ * softirq context.
+ */
+void clock_was_set_delayed(void)
+{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ cpu_base->clock_was_set = 1;
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+}
+
#else
static inline int hrtimer_hres_active(void) { return 0; }
cpu_base->nr_events++;
dev->next_event.tv64 = KTIME_MAX;
- entry_time = now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ entry_time = now = hrtimer_update_base(cpu_base);
retry:
expires_next.tv64 = KTIME_MAX;
-
- raw_spin_lock(&cpu_base->lock);
/*
* We set expires_next to KTIME_MAX here with cpu_base->lock
* held to prevent that a timer is enqueued in our queue via
* We need to prevent that we loop forever in the hrtimer
* interrupt routine. We give it 3 attempts to avoid
* overreacting on some spurious event.
+ *
+ * Acquire base lock for updating the offsets and retrieving
+ * the current time.
*/
- now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ now = hrtimer_update_base(cpu_base);
cpu_base->nr_retries++;
if (++retries < 3)
goto retry;
*/
cpu_base->nr_hangs++;
cpu_base->hang_detected = 1;
+ raw_spin_unlock(&cpu_base->lock);
delta = ktime_sub(now, entry_time);
if (delta.tv64 > cpu_base->max_hang_time.tv64)
cpu_base->max_hang_time = delta;
static void run_hrtimer_softirq(struct softirq_action *h)
{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ if (cpu_base->clock_was_set) {
+ cpu_base->clock_was_set = 0;
+ clock_was_set();
+ }
+
hrtimer_peek_ahead_timers();
}
*/
enum log_flags {
- LOG_DEFAULT = 0,
- LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NEWLINE = 2, /* text ended with a newline */
+ LOG_PREFIX = 4, /* text started with a prefix */
+ LOG_CONT = 8, /* text is a fragment of a continuation line */
};
struct log {
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
+static enum log_flags syslog_prev;
+static size_t syslog_partial;
/* index and sequence number of the first record stored in the buffer */
static u64 log_first_seq;
ret = mutex_lock_interruptible(&user->lock);
if (ret)
return ret;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
ret = wait_event_interruptible(log_wait,
user->seq != log_next_seq);
if (ret)
goto out;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
}
if (user->seq < log_first_seq) {
user->idx = log_first_idx;
user->seq = log_first_seq;
ret = -EPIPE;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
for (i = 0; i < msg->text_len; i++) {
unsigned char c = log_text(msg)[i];
- if (c < ' ' || c >= 128)
+ if (c < ' ' || c >= 127 || c == '\\')
len += sprintf(user->buf + len, "\\x%02x", c);
else
user->buf[len++] = c;
continue;
}
- if (c < ' ' || c >= 128) {
+ if (c < ' ' || c >= 127 || c == '\\') {
len += sprintf(user->buf + len, "\\x%02x", c);
continue;
}
user->idx = log_next(user->idx);
user->seq++;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
if (len > count) {
ret = -EINVAL;
if (offset)
return -ESPIPE;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
switch (whence) {
case SEEK_SET:
/* the first record */
default:
ret = -EINVAL;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
poll_wait(file, &log_wait, wait);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
if (user->seq < log_next_seq) {
/* return error when data has vanished underneath us */
if (user->seq < log_first_seq)
ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI;
ret = POLLIN|POLLRDNORM;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
mutex_init(&user->lock);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
user->idx = log_first_idx;
user->seq = log_first_seq;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
file->private_data = user;
return 0;
static size_t print_prefix(const struct log *msg, bool syslog, char *buf)
{
size_t len = 0;
+ unsigned int prefix = (msg->facility << 3) | msg->level;
if (syslog) {
if (buf) {
- len += sprintf(buf, "<%u>", msg->level);
+ len += sprintf(buf, "<%u>", prefix);
} else {
len += 3;
- if (msg->level > 9)
- len++;
- if (msg->level > 99)
+ if (prefix > 999)
+ len += 3;
+ else if (prefix > 99)
+ len += 2;
+ else if (prefix > 9)
len++;
}
}
return len;
}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size)
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size)
{
const char *text = log_text(msg);
size_t text_size = msg->text_len;
+ bool prefix = true;
+ bool newline = true;
size_t len = 0;
+ if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
+ prefix = false;
+
+ if (msg->flags & LOG_CONT) {
+ if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
+ prefix = false;
+
+ if (!(msg->flags & LOG_NEWLINE))
+ newline = false;
+ }
+
do {
const char *next = memchr(text, '\n', text_size);
size_t text_len;
text_len + 1>= size - len)
break;
- len += print_prefix(msg, syslog, buf + len);
+ if (prefix)
+ len += print_prefix(msg, syslog, buf + len);
memcpy(buf + len, text, text_len);
len += text_len;
- buf[len++] = '\n';
+ if (next || newline)
+ buf[len++] = '\n';
} else {
/* SYSLOG_ACTION_* buffer size only calculation */
- len += print_prefix(msg, syslog, NULL);
- len += text_len + 1;
+ if (prefix)
+ len += print_prefix(msg, syslog, NULL);
+ len += text_len;
+ if (next || newline)
+ len++;
}
+ prefix = true;
text = next;
} while (text);
while (size > 0) {
size_t n;
+ size_t skip;
raw_spin_lock_irq(&logbuf_lock);
if (syslog_seq < log_first_seq) {
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
}
if (syslog_seq == log_next_seq) {
raw_spin_unlock_irq(&logbuf_lock);
break;
}
+
+ skip = syslog_partial;
msg = log_from_idx(syslog_idx);
- n = msg_print_text(msg, true, text, LOG_LINE_MAX);
- if (n <= size) {
+ n = msg_print_text(msg, syslog_prev, true, text, LOG_LINE_MAX);
+ if (n - syslog_partial <= size) {
+ /* message fits into buffer, move forward */
syslog_idx = log_next(syslog_idx);
syslog_seq++;
+ syslog_prev = msg->flags;
+ n -= syslog_partial;
+ syslog_partial = 0;
+ } else if (!len){
+ /* partial read(), remember position */
+ n = size;
+ syslog_partial += n;
} else
n = 0;
raw_spin_unlock_irq(&logbuf_lock);
if (!n)
break;
- len += n;
- size -= n;
- buf += n;
- n = copy_to_user(buf - n, text, n);
-
- if (n) {
- len -= n;
+ if (copy_to_user(buf, text + skip, n)) {
if (!len)
len = -EFAULT;
break;
}
+
+ len += n;
+ size -= n;
+ buf += n;
}
kfree(text);
u64 next_seq;
u64 seq;
u32 idx;
+ enum log_flags prev;
if (clear_seq < log_first_seq) {
/* messages are gone, move to first available one */
*/
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len += msg_print_text(msg, true, NULL, 0);
+ len += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
/* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (len > size && seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len -= msg_print_text(msg, true, NULL, 0);
+ len -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
next_seq = log_next_seq;
len = 0;
+ prev = 0;
while (len >= 0 && seq < next_seq) {
struct log *msg = log_from_idx(idx);
int textlen;
- textlen = msg_print_text(msg, true, text, LOG_LINE_MAX);
+ textlen = msg_print_text(msg, prev, true, text, LOG_LINE_MAX);
if (textlen < 0) {
len = textlen;
break;
}
idx = log_next(idx);
seq++;
+ prev = msg->flags;
raw_spin_unlock_irq(&logbuf_lock);
if (copy_to_user(buf + len, text, textlen))
/* messages are gone, move to next one */
seq = log_first_seq;
idx = log_first_idx;
+ prev = 0;
}
}
}
{
bool clear = false;
static int saved_console_loglevel = -1;
- static DEFINE_MUTEX(syslog_mutex);
int error;
error = check_syslog_permissions(type, from_file);
error = -EFAULT;
goto out;
}
- error = mutex_lock_interruptible(&syslog_mutex);
- if (error)
- goto out;
error = wait_event_interruptible(log_wait,
syslog_seq != log_next_seq);
- if (error) {
- mutex_unlock(&syslog_mutex);
+ if (error)
goto out;
- }
error = syslog_print(buf, len);
- mutex_unlock(&syslog_mutex);
break;
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
}
if (from_file) {
/*
*/
error = log_next_idx - syslog_idx;
} else {
- u64 seq;
- u32 idx;
+ u64 seq = syslog_seq;
+ u32 idx = syslog_idx;
+ enum log_flags prev = syslog_prev;
error = 0;
- seq = syslog_seq;
- idx = syslog_idx;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- error += msg_print_text(msg, true, NULL, 0);
+ error += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
+ error -= syslog_partial;
}
raw_spin_unlock_irq(&logbuf_lock);
break;
static char textbuf[LOG_LINE_MAX];
char *text = textbuf;
size_t text_len;
+ enum log_flags lflags = 0;
unsigned long flags;
int this_cpu;
- bool newline = false;
- bool prefix = false;
int printed_len = 0;
boot_delay_msec();
recursion_bug = 0;
printed_len += strlen(recursion_msg);
/* emit KERN_CRIT message */
- log_store(0, 2, LOG_DEFAULT, 0,
+ log_store(0, 2, LOG_PREFIX|LOG_NEWLINE, 0,
NULL, 0, recursion_msg, printed_len);
}
/* mark and strip a trailing newline */
if (text_len && text[text_len-1] == '\n') {
text_len--;
- newline = true;
+ lflags |= LOG_NEWLINE;
}
/* strip syslog prefix and extract log level or control flags */
if (level == -1)
level = text[1] - '0';
case 'd': /* KERN_DEFAULT */
- prefix = true;
+ lflags |= LOG_PREFIX;
case 'c': /* KERN_CONT */
text += 3;
text_len -= 3;
if (level == -1)
level = default_message_loglevel;
- if (dict) {
- prefix = true;
- newline = true;
- }
+ if (dict)
+ lflags |= LOG_PREFIX|LOG_NEWLINE;
- if (!newline) {
+ if (!(lflags & LOG_NEWLINE)) {
/*
* Flush the conflicting buffer. An earlier newline was missing,
* or another task also prints continuation lines.
*/
- if (cont.len && (prefix || cont.owner != current))
+ if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
cont_flush();
/* buffer line if possible, otherwise store it right away */
if (!cont_add(facility, level, text, text_len))
- log_store(facility, level, LOG_DEFAULT, 0,
+ log_store(facility, level, lflags | LOG_CONT, 0,
dict, dictlen, text, text_len);
} else {
bool stored = false;
* flush it out and store this line separately.
*/
if (cont.len && cont.owner == current) {
- if (!prefix)
+ if (!(lflags & LOG_PREFIX))
stored = cont_add(facility, level, text, text_len);
cont_flush();
}
if (!stored)
- log_store(facility, level, LOG_DEFAULT, 0,
+ log_store(facility, level, lflags, 0,
dict, dictlen, text, text_len);
}
printed_len += text_len;
static struct log *log_from_idx(u32 idx) { return NULL; }
static u32 log_next(u32 idx) { return 0; }
static void call_console_drivers(int level, const char *text, size_t len) {}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size) { return 0; }
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size) { return 0; }
static size_t cont_print_text(char *text, size_t size) { return 0; }
#endif /* CONFIG_PRINTK */
/* the next printk record to write to the console */
static u64 console_seq;
static u32 console_idx;
+static enum log_flags console_prev;
/**
* console_unlock - unlock the console system
/* messages are gone, move to first one */
console_seq = log_first_seq;
console_idx = log_first_idx;
+ console_prev = 0;
}
skip:
if (console_seq == log_next_seq)
*/
console_idx = log_next(console_idx);
console_seq++;
+ /*
+ * We will get here again when we register a new
+ * CON_PRINTBUFFER console. Clear the flag so we
+ * will properly dump everything later.
+ */
+ msg->flags &= ~LOG_NOCONS;
goto skip;
}
level = msg->level;
- len = msg_print_text(msg, false, text, sizeof(text));
-
+ len = msg_print_text(msg, console_prev, false,
+ text, sizeof(text));
console_idx = log_next(console_idx);
console_seq++;
+ console_prev = msg->flags;
raw_spin_unlock(&logbuf_lock);
stop_critical_timings(); /* don't trace print latency */
raw_spin_lock_irqsave(&logbuf_lock, flags);
console_seq = syslog_seq;
console_idx = syslog_idx;
+ console_prev = syslog_prev;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
/*
* We're about to replay the log buffer. Only do this to the
}
msg = log_from_idx(dumper->cur_idx);
- l = msg_print_text(msg, syslog,
- line, size);
+ l = msg_print_text(msg, 0, syslog, line, size);
dumper->cur_idx = log_next(dumper->cur_idx);
dumper->cur_seq++;
u32 idx;
u64 next_seq;
u32 next_idx;
+ enum log_flags prev;
size_t l = 0;
bool ret = false;
/* calculate length of entire buffer */
seq = dumper->cur_seq;
idx = dumper->cur_idx;
+ prev = 0;
while (seq < dumper->next_seq) {
struct log *msg = log_from_idx(idx);
- l += msg_print_text(msg, true, NULL, 0);
+ l += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
/* move first record forward until length fits into the buffer */
seq = dumper->cur_seq;
idx = dumper->cur_idx;
+ prev = 0;
while (l > size && seq < dumper->next_seq) {
struct log *msg = log_from_idx(idx);
- l -= msg_print_text(msg, true, NULL, 0);
+ l -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
/* last message in next interation */
next_idx = idx;
l = 0;
+ prev = 0;
while (seq < dumper->next_seq) {
struct log *msg = log_from_idx(idx);
- l += msg_print_text(msg, syslog,
- buf + l, size - l);
-
+ l += msg_print_text(msg, prev, syslog, buf + l, size - l);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
dumper->next_seq = next_seq;
{
trace_rcu_utilization("Start context switch");
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch(cpu);
trace_rcu_utilization("End context switch");
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
+static void rcu_preempt_note_context_switch(int cpu);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
*
* Caller must disable preemption.
*/
-void rcu_preempt_note_context_switch(void)
+static void rcu_preempt_note_context_switch(int cpu)
{
struct task_struct *t = current;
unsigned long flags;
(t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
/* Possibly blocking in an RCU read-side critical section. */
- rdp = __this_cpu_ptr(rcu_preempt_state.rda);
+ rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
* means that we continue to block the current grace period.
*/
local_irq_save(flags);
- rcu_preempt_qs(smp_processor_id());
+ rcu_preempt_qs(cpu);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
+ * Because preemptible RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_note_context_switch(int cpu)
+{
+}
+
+/*
* Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
*/
#endif
/* Here we just switch the register state and the stack. */
- rcu_switch_from(prev);
switch_to(prev, next, prev);
barrier();
}
+/*
+ * Global load-average calculations
+ *
+ * We take a distributed and async approach to calculating the global load-avg
+ * in order to minimize overhead.
+ *
+ * The global load average is an exponentially decaying average of nr_running +
+ * nr_uninterruptible.
+ *
+ * Once every LOAD_FREQ:
+ *
+ * nr_active = 0;
+ * for_each_possible_cpu(cpu)
+ * nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
+ *
+ * avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
+ *
+ * Due to a number of reasons the above turns in the mess below:
+ *
+ * - for_each_possible_cpu() is prohibitively expensive on machines with
+ * serious number of cpus, therefore we need to take a distributed approach
+ * to calculating nr_active.
+ *
+ * \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
+ * = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
+ *
+ * So assuming nr_active := 0 when we start out -- true per definition, we
+ * can simply take per-cpu deltas and fold those into a global accumulate
+ * to obtain the same result. See calc_load_fold_active().
+ *
+ * Furthermore, in order to avoid synchronizing all per-cpu delta folding
+ * across the machine, we assume 10 ticks is sufficient time for every
+ * cpu to have completed this task.
+ *
+ * This places an upper-bound on the IRQ-off latency of the machine. Then
+ * again, being late doesn't loose the delta, just wrecks the sample.
+ *
+ * - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
+ * this would add another cross-cpu cacheline miss and atomic operation
+ * to the wakeup path. Instead we increment on whatever cpu the task ran
+ * when it went into uninterruptible state and decrement on whatever cpu
+ * did the wakeup. This means that only the sum of nr_uninterruptible over
+ * all cpus yields the correct result.
+ *
+ * This covers the NO_HZ=n code, for extra head-aches, see the comment below.
+ */
+
/* Variables and functions for calc_load */
static atomic_long_t calc_load_tasks;
static unsigned long calc_load_update;
unsigned long avenrun[3];
-EXPORT_SYMBOL(avenrun);
+EXPORT_SYMBOL(avenrun); /* should be removed */
+
+/**
+ * get_avenrun - get the load average array
+ * @loads: pointer to dest load array
+ * @offset: offset to add
+ * @shift: shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
+{
+ loads[0] = (avenrun[0] + offset) << shift;
+ loads[1] = (avenrun[1] + offset) << shift;
+ loads[2] = (avenrun[2] + offset) << shift;
+}
static long calc_load_fold_active(struct rq *this_rq)
{
return delta;
}
+/*
+ * a1 = a0 * e + a * (1 - e)
+ */
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
#ifdef CONFIG_NO_HZ
/*
- * For NO_HZ we delay the active fold to the next LOAD_FREQ update.
+ * Handle NO_HZ for the global load-average.
+ *
+ * Since the above described distributed algorithm to compute the global
+ * load-average relies on per-cpu sampling from the tick, it is affected by
+ * NO_HZ.
+ *
+ * The basic idea is to fold the nr_active delta into a global idle-delta upon
+ * entering NO_HZ state such that we can include this as an 'extra' cpu delta
+ * when we read the global state.
+ *
+ * Obviously reality has to ruin such a delightfully simple scheme:
+ *
+ * - When we go NO_HZ idle during the window, we can negate our sample
+ * contribution, causing under-accounting.
+ *
+ * We avoid this by keeping two idle-delta counters and flipping them
+ * when the window starts, thus separating old and new NO_HZ load.
+ *
+ * The only trick is the slight shift in index flip for read vs write.
+ *
+ * 0s 5s 10s 15s
+ * +10 +10 +10 +10
+ * |-|-----------|-|-----------|-|-----------|-|
+ * r:0 0 1 1 0 0 1 1 0
+ * w:0 1 1 0 0 1 1 0 0
+ *
+ * This ensures we'll fold the old idle contribution in this window while
+ * accumlating the new one.
+ *
+ * - When we wake up from NO_HZ idle during the window, we push up our
+ * contribution, since we effectively move our sample point to a known
+ * busy state.
+ *
+ * This is solved by pushing the window forward, and thus skipping the
+ * sample, for this cpu (effectively using the idle-delta for this cpu which
+ * was in effect at the time the window opened). This also solves the issue
+ * of having to deal with a cpu having been in NOHZ idle for multiple
+ * LOAD_FREQ intervals.
*
* When making the ILB scale, we should try to pull this in as well.
*/
-static atomic_long_t calc_load_tasks_idle;
+static atomic_long_t calc_load_idle[2];
+static int calc_load_idx;
-void calc_load_account_idle(struct rq *this_rq)
+static inline int calc_load_write_idx(void)
{
+ int idx = calc_load_idx;
+
+ /*
+ * See calc_global_nohz(), if we observe the new index, we also
+ * need to observe the new update time.
+ */
+ smp_rmb();
+
+ /*
+ * If the folding window started, make sure we start writing in the
+ * next idle-delta.
+ */
+ if (!time_before(jiffies, calc_load_update))
+ idx++;
+
+ return idx & 1;
+}
+
+static inline int calc_load_read_idx(void)
+{
+ return calc_load_idx & 1;
+}
+
+void calc_load_enter_idle(void)
+{
+ struct rq *this_rq = this_rq();
long delta;
+ /*
+ * We're going into NOHZ mode, if there's any pending delta, fold it
+ * into the pending idle delta.
+ */
delta = calc_load_fold_active(this_rq);
- if (delta)
- atomic_long_add(delta, &calc_load_tasks_idle);
+ if (delta) {
+ int idx = calc_load_write_idx();
+ atomic_long_add(delta, &calc_load_idle[idx]);
+ }
}
-static long calc_load_fold_idle(void)
+void calc_load_exit_idle(void)
{
- long delta = 0;
+ struct rq *this_rq = this_rq();
+
+ /*
+ * If we're still before the sample window, we're done.
+ */
+ if (time_before(jiffies, this_rq->calc_load_update))
+ return;
/*
- * Its got a race, we don't care...
+ * We woke inside or after the sample window, this means we're already
+ * accounted through the nohz accounting, so skip the entire deal and
+ * sync up for the next window.
*/
- if (atomic_long_read(&calc_load_tasks_idle))
- delta = atomic_long_xchg(&calc_load_tasks_idle, 0);
+ this_rq->calc_load_update = calc_load_update;
+ if (time_before(jiffies, this_rq->calc_load_update + 10))
+ this_rq->calc_load_update += LOAD_FREQ;
+}
+
+static long calc_load_fold_idle(void)
+{
+ int idx = calc_load_read_idx();
+ long delta = 0;
+
+ if (atomic_long_read(&calc_load_idle[idx]))
+ delta = atomic_long_xchg(&calc_load_idle[idx], 0);
return delta;
}
{
long delta, active, n;
- /*
- * If we crossed a calc_load_update boundary, make sure to fold
- * any pending idle changes, the respective CPUs might have
- * missed the tick driven calc_load_account_active() update
- * due to NO_HZ.
- */
- delta = calc_load_fold_idle();
- if (delta)
- atomic_long_add(delta, &calc_load_tasks);
-
- /*
- * It could be the one fold was all it took, we done!
- */
- if (time_before(jiffies, calc_load_update + 10))
- return;
-
- /*
- * Catch-up, fold however many we are behind still
- */
- delta = jiffies - calc_load_update - 10;
- n = 1 + (delta / LOAD_FREQ);
+ if (!time_before(jiffies, calc_load_update + 10)) {
+ /*
+ * Catch-up, fold however many we are behind still
+ */
+ delta = jiffies - calc_load_update - 10;
+ n = 1 + (delta / LOAD_FREQ);
- active = atomic_long_read(&calc_load_tasks);
- active = active > 0 ? active * FIXED_1 : 0;
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
- avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
- avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
- avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
- calc_load_update += n * LOAD_FREQ;
-}
-#else
-void calc_load_account_idle(struct rq *this_rq)
-{
-}
+ calc_load_update += n * LOAD_FREQ;
+ }
-static inline long calc_load_fold_idle(void)
-{
- return 0;
+ /*
+ * Flip the idle index...
+ *
+ * Make sure we first write the new time then flip the index, so that
+ * calc_load_write_idx() will see the new time when it reads the new
+ * index, this avoids a double flip messing things up.
+ */
+ smp_wmb();
+ calc_load_idx++;
}
+#else /* !CONFIG_NO_HZ */
-static void calc_global_nohz(void)
-{
-}
-#endif
+static inline long calc_load_fold_idle(void) { return 0; }
+static inline void calc_global_nohz(void) { }
-/**
- * get_avenrun - get the load average array
- * @loads: pointer to dest load array
- * @offset: offset to add
- * @shift: shift count to shift the result left
- *
- * These values are estimates at best, so no need for locking.
- */
-void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
-{
- loads[0] = (avenrun[0] + offset) << shift;
- loads[1] = (avenrun[1] + offset) << shift;
- loads[2] = (avenrun[2] + offset) << shift;
-}
+#endif /* CONFIG_NO_HZ */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
*/
void calc_global_load(unsigned long ticks)
{
- long active;
+ long active, delta;
if (time_before(jiffies, calc_load_update + 10))
return;
+ /*
+ * Fold the 'old' idle-delta to include all NO_HZ cpus.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
calc_load_update += LOAD_FREQ;
/*
- * Account one period with whatever state we found before
- * folding in the nohz state and ageing the entire idle period.
- *
- * This avoids loosing a sample when we go idle between
- * calc_load_account_active() (10 ticks ago) and now and thus
- * under-accounting.
+ * In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
*/
calc_global_nohz();
}
return;
delta = calc_load_fold_active(this_rq);
- delta += calc_load_fold_idle();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
}
/*
+ * End of global load-average stuff
+ */
+
+/*
* The exact cpuload at various idx values, calculated at every tick would be
* load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
*
static struct task_struct *pick_next_task_idle(struct rq *rq)
{
schedstat_inc(rq, sched_goidle);
- calc_load_account_idle(rq);
return rq->idle;
}
return (u64)sysctl_sched_time_avg * NSEC_PER_MSEC / 2;
}
-void calc_load_account_idle(struct rq *this_rq);
-
#ifdef CONFIG_SCHED_HRTICK
/*
#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
{
- struct vm_area_struct *vma;
struct file *exe_file;
struct dentry *dentry;
int err;
down_write(&mm->mmap_sem);
/*
- * Forbid mm->exe_file change if there are mapped other files.
+ * Forbid mm->exe_file change if old file still mapped.
*/
err = -EBUSY;
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- if (vma->vm_file && !path_equal(&vma->vm_file->f_path,
- &exe_file->f_path))
- goto exit_unlock;
+ if (mm->exe_file) {
+ struct vm_area_struct *vma;
+
+ for (vma = mm->mmap; vma; vma = vma->vm_next)
+ if (vma->vm_file &&
+ path_equal(&vma->vm_file->f_path,
+ &mm->exe_file->f_path))
+ goto exit_unlock;
}
/*
if (test_and_set_bit(MMF_EXE_FILE_CHANGED, &mm->flags))
goto exit_unlock;
+ err = 0;
set_mm_exe_file(mm, exe_file);
exit_unlock:
up_write(&mm->mmap_sem);
*/
if (!ts->tick_stopped) {
select_nohz_load_balancer(1);
+ calc_load_enter_idle();
ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
account_idle_ticks(ticks);
#endif
+ calc_load_exit_idle();
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
struct timespec raw_time;
+ /* Offset clock monotonic -> clock realtime */
+ ktime_t offs_real;
+
+ /* Offset clock monotonic -> clock boottime */
+ ktime_t offs_boot;
+
/* Seqlock for all timekeeper values */
seqlock_t lock;
};
return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
}
+static void update_rt_offset(void)
+{
+ struct timespec tmp, *wtm = &timekeeper.wall_to_monotonic;
+
+ set_normalized_timespec(&tmp, -wtm->tv_sec, -wtm->tv_nsec);
+ timekeeper.offs_real = timespec_to_ktime(tmp);
+}
+
/* must hold write on timekeeper.lock */
static void timekeeping_update(bool clearntp)
{
timekeeper.ntp_error = 0;
ntp_clear();
}
+ update_rt_offset();
update_vsyscall(&timekeeper.xtime, &timekeeper.wall_to_monotonic,
timekeeper.clock, timekeeper.mult);
}
}
set_normalized_timespec(&timekeeper.wall_to_monotonic,
-boot.tv_sec, -boot.tv_nsec);
+ update_rt_offset();
timekeeper.total_sleep_time.tv_sec = 0;
timekeeper.total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&timekeeper.lock, flags);
/* time in seconds when suspend began */
static struct timespec timekeeping_suspend_time;
+static void update_sleep_time(struct timespec t)
+{
+ timekeeper.total_sleep_time = t;
+ timekeeper.offs_boot = timespec_to_ktime(t);
+}
+
/**
* __timekeeping_inject_sleeptime - Internal function to add sleep interval
* @delta: pointer to a timespec delta value
timekeeper.xtime = timespec_add(timekeeper.xtime, *delta);
timekeeper.wall_to_monotonic =
timespec_sub(timekeeper.wall_to_monotonic, *delta);
- timekeeper.total_sleep_time = timespec_add(
- timekeeper.total_sleep_time, *delta);
+ update_sleep_time(timespec_add(timekeeper.total_sleep_time, *delta));
}
leap = second_overflow(timekeeper.xtime.tv_sec);
timekeeper.xtime.tv_sec += leap;
timekeeper.wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
}
/* Accumulate raw time */
leap = second_overflow(timekeeper.xtime.tv_sec);
timekeeper.xtime.tv_sec += leap;
timekeeper.wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
}
timekeeping_update(false);
} while (read_seqretry(&timekeeper.lock, seq));
}
+#ifdef CONFIG_HIGH_RES_TIMERS
+/**
+ * ktime_get_update_offsets - hrtimer helper
+ * @offs_real: pointer to storage for monotonic -> realtime offset
+ * @offs_boot: pointer to storage for monotonic -> boottime offset
+ *
+ * Returns current monotonic time and updates the offsets
+ * Called from hrtimer_interupt() or retrigger_next_event()
+ */
+ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot)
+{
+ ktime_t now;
+ unsigned int seq;
+ u64 secs, nsecs;
+
+ do {
+ seq = read_seqbegin(&timekeeper.lock);
+
+ secs = timekeeper.xtime.tv_sec;
+ nsecs = timekeeper.xtime.tv_nsec;
+ nsecs += timekeeping_get_ns();
+ /* If arch requires, add in gettimeoffset() */
+ nsecs += arch_gettimeoffset();
+
+ *offs_real = timekeeper.offs_real;
+ *offs_boot = timekeeper.offs_boot;
+ } while (read_seqretry(&timekeeper.lock, seq));
+
+ now = ktime_add_ns(ktime_set(secs, 0), nsecs);
+ now = ktime_sub(now, *offs_real);
+ return now;
+}
+#endif
+
/**
* ktime_get_monotonic_offset() - get wall_to_monotonic in ktime_t format
*/
rb_init_page(bpage->page);
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
+ INIT_LIST_HEAD(&cpu_buffer->new_pages);
ret = rb_allocate_pages(cpu_buffer, nr_pages);
if (ret < 0)
* If something was added to this page, it was full
* since it is not the tail page. So we deduct the
* bytes consumed in ring buffer from here.
- * No need to update overruns, since this page is
- * deleted from ring buffer and its entries are
- * already accounted for.
+ * Increment overrun to account for the lost events.
*/
+ local_add(page_entries, &cpu_buffer->overrun);
local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes);
}
static DEFINE_SPINLOCK(free_entries_lock);
/* Global disable flag - will be set in case of an error */
-static bool global_disable __read_mostly;
+static u32 global_disable __read_mostly;
/* Global error count */
static u32 error_count;
global_disable_dent = debugfs_create_bool("disabled", 0444,
dma_debug_dent,
- (u32 *)&global_disable);
+ &global_disable);
if (!global_disable_dent)
goto out_err;
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size, unsigned long align,
unsigned long goal, unsigned long limit)
{
if (err) {
putback_lru_pages(&cc->migratepages);
cc->nr_migratepages = 0;
+ if (err == -ENOMEM) {
+ ret = COMPACT_PARTIAL;
+ goto out;
+ }
}
-
}
out:
MAX_NUMNODES);
}
-/*
- * Free memblock.reserved.regions
- */
-int __init_memblock memblock_free_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_free(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
-/*
- * Reserve memblock.reserved.regions
- */
-int __init_memblock memblock_reserve_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_reserve(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
{
type->total_size -= type->regions[r].size;
}
}
+phys_addr_t __init_memblock get_allocated_memblock_reserved_regions_info(
+ phys_addr_t *addr)
+{
+ if (memblock.reserved.regions == memblock_reserved_init_regions)
+ return 0;
+
+ *addr = __pa(memblock.reserved.regions);
+
+ return PAGE_ALIGN(sizeof(struct memblock_region) *
+ memblock.reserved.max);
+}
+
/**
* memblock_double_array - double the size of the memblock regions array
* @type: memblock type of the regions array being doubled
phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
+ phys_addr_t old_alloc_size, new_alloc_size;
phys_addr_t old_size, new_size, addr;
int use_slab = slab_is_available();
int *in_slab;
/* Calculate new doubled size */
old_size = type->max * sizeof(struct memblock_region);
new_size = old_size << 1;
+ /*
+ * We need to allocated new one align to PAGE_SIZE,
+ * so we can free them completely later.
+ */
+ old_alloc_size = PAGE_ALIGN(old_size);
+ new_alloc_size = PAGE_ALIGN(new_size);
/* Retrieve the slab flag */
if (type == &memblock.memory)
addr = memblock_find_in_range(new_area_start + new_area_size,
memblock.current_limit,
- new_size, sizeof(phys_addr_t));
+ new_alloc_size, PAGE_SIZE);
if (!addr && new_area_size)
addr = memblock_find_in_range(0,
min(new_area_start, memblock.current_limit),
- new_size, sizeof(phys_addr_t));
+ new_alloc_size, PAGE_SIZE);
new_array = addr ? __va(addr) : 0;
}
kfree(old_array);
else if (old_array != memblock_memory_init_regions &&
old_array != memblock_reserved_init_regions)
- memblock_free(__pa(old_array), old_size);
+ memblock_free(__pa(old_array), old_alloc_size);
/* Reserve the new array if that comes from the memblock.
* Otherwise, we needn't do it
*/
if (!use_slab)
- BUG_ON(memblock_reserve(addr, new_size));
+ BUG_ON(memblock_reserve(addr, new_alloc_size));
/* Update slab flag */
*in_slab = use_slab;
pgdat = hotadd_new_pgdat(nid, start);
ret = -ENOMEM;
if (!pgdat)
- goto out;
+ goto error;
new_pgdat = 1;
}
__free_pages_bootmem(pfn_to_page(i), 0);
}
+static unsigned long __init __free_memory_core(phys_addr_t start,
+ phys_addr_t end)
+{
+ unsigned long start_pfn = PFN_UP(start);
+ unsigned long end_pfn = min_t(unsigned long,
+ PFN_DOWN(end), max_low_pfn);
+
+ if (start_pfn > end_pfn)
+ return 0;
+
+ __free_pages_memory(start_pfn, end_pfn);
+
+ return end_pfn - start_pfn;
+}
+
unsigned long __init free_low_memory_core_early(int nodeid)
{
unsigned long count = 0;
- phys_addr_t start, end;
+ phys_addr_t start, end, size;
u64 i;
- /* free reserved array temporarily so that it's treated as free area */
- memblock_free_reserved_regions();
-
- for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
- unsigned long start_pfn = PFN_UP(start);
- unsigned long end_pfn = min_t(unsigned long,
- PFN_DOWN(end), max_low_pfn);
- if (start_pfn < end_pfn) {
- __free_pages_memory(start_pfn, end_pfn);
- count += end_pfn - start_pfn;
- }
- }
+ for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
+ count += __free_memory_core(start, end);
+
+ /* free range that is used for reserved array if we allocate it */
+ size = get_allocated_memblock_reserved_regions_info(&start);
+ if (size)
+ count += __free_memory_core(start, start + size);
- /* put region array back? */
- memblock_reserve_reserved_regions();
return count;
}
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size,
unsigned long align,
unsigned long goal,
}
/*
+ * Sometimes, before we decide whether to proceed or to fail, we must check
+ * that an entry was not already brought back from swap by a racing thread.
+ *
+ * Checking page is not enough: by the time a SwapCache page is locked, it
+ * might be reused, and again be SwapCache, using the same swap as before.
+ */
+static bool shmem_confirm_swap(struct address_space *mapping,
+ pgoff_t index, swp_entry_t swap)
+{
+ void *item;
+
+ rcu_read_lock();
+ item = radix_tree_lookup(&mapping->page_tree, index);
+ rcu_read_unlock();
+ return item == swp_to_radix_entry(swap);
+}
+
+/*
* Like add_to_page_cache_locked, but error if expected item has gone.
*/
static int shmem_add_to_page_cache(struct page *page,
struct address_space *mapping,
pgoff_t index, gfp_t gfp, void *expected)
{
- int error = 0;
+ int error;
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapBacked(page));
+ page_cache_get(page);
+ page->mapping = mapping;
+ page->index = index;
+
+ spin_lock_irq(&mapping->tree_lock);
if (!expected)
- error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ error = radix_tree_insert(&mapping->page_tree, index, page);
+ else
+ error = shmem_radix_tree_replace(mapping, index, expected,
+ page);
if (!error) {
- page_cache_get(page);
- page->mapping = mapping;
- page->index = index;
-
- spin_lock_irq(&mapping->tree_lock);
- if (!expected)
- error = radix_tree_insert(&mapping->page_tree,
- index, page);
- else
- error = shmem_radix_tree_replace(mapping, index,
- expected, page);
- if (!error) {
- mapping->nrpages++;
- __inc_zone_page_state(page, NR_FILE_PAGES);
- __inc_zone_page_state(page, NR_SHMEM);
- spin_unlock_irq(&mapping->tree_lock);
- } else {
- page->mapping = NULL;
- spin_unlock_irq(&mapping->tree_lock);
- page_cache_release(page);
- }
- if (!expected)
- radix_tree_preload_end();
+ mapping->nrpages++;
+ __inc_zone_page_state(page, NR_FILE_PAGES);
+ __inc_zone_page_state(page, NR_SHMEM);
+ spin_unlock_irq(&mapping->tree_lock);
+ } else {
+ page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
+ page_cache_release(page);
}
- if (error)
- mem_cgroup_uncharge_cache_page(page);
return error;
}
/* We have to do this with page locked to prevent races */
lock_page(page);
if (!PageSwapCache(page) || page_private(page) != swap.val ||
- page->mapping) {
+ !shmem_confirm_swap(mapping, index, swap)) {
error = -EEXIST; /* try again */
- goto failed;
+ goto unlock;
}
if (!PageUptodate(page)) {
error = -EIO;
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
+ if (!error) {
error = shmem_add_to_page_cache(page, mapping, index,
gfp, swp_to_radix_entry(swap));
+ /* We already confirmed swap, and make no allocation */
+ VM_BUG_ON(error);
+ }
if (error)
goto failed;
__set_page_locked(page);
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
- error = shmem_add_to_page_cache(page, mapping, index,
- gfp, NULL);
if (error)
goto decused;
+ error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ if (!error) {
+ error = shmem_add_to_page_cache(page, mapping, index,
+ gfp, NULL);
+ radix_tree_preload_end();
+ }
+ if (error) {
+ mem_cgroup_uncharge_cache_page(page);
+ goto decused;
+ }
lru_cache_add_anon(page);
spin_lock(&info->lock);
unacct:
shmem_unacct_blocks(info->flags, 1);
failed:
- if (swap.val && error != -EINVAL) {
- struct page *test = find_get_page(mapping, index);
- if (test && !radix_tree_exceptional_entry(test))
- page_cache_release(test);
- /* Have another try if the entry has changed */
- if (test != swp_to_radix_entry(swap))
- error = -EEXIST;
- }
+ if (swap.val && error != -EINVAL &&
+ !shmem_confirm_swap(mapping, index, swap))
+ error = -EEXIST;
+unlock:
if (page) {
unlock_page(page);
page_cache_release(page);
spin_unlock(&info->lock);
goto repeat;
}
- if (error == -EEXIST)
+ if (error == -EEXIST) /* from above or from radix_tree_insert */
goto repeat;
return error;
}
return error;
}
-/*
- * llseek SEEK_DATA or SEEK_HOLE through the radix_tree.
- */
-static pgoff_t shmem_seek_hole_data(struct address_space *mapping,
- pgoff_t index, pgoff_t end, int origin)
-{
- struct page *page;
- struct pagevec pvec;
- pgoff_t indices[PAGEVEC_SIZE];
- bool done = false;
- int i;
-
- pagevec_init(&pvec, 0);
- pvec.nr = 1; /* start small: we may be there already */
- while (!done) {
- pvec.nr = shmem_find_get_pages_and_swap(mapping, index,
- pvec.nr, pvec.pages, indices);
- if (!pvec.nr) {
- if (origin == SEEK_DATA)
- index = end;
- break;
- }
- for (i = 0; i < pvec.nr; i++, index++) {
- if (index < indices[i]) {
- if (origin == SEEK_HOLE) {
- done = true;
- break;
- }
- index = indices[i];
- }
- page = pvec.pages[i];
- if (page && !radix_tree_exceptional_entry(page)) {
- if (!PageUptodate(page))
- page = NULL;
- }
- if (index >= end ||
- (page && origin == SEEK_DATA) ||
- (!page && origin == SEEK_HOLE)) {
- done = true;
- break;
- }
- }
- shmem_deswap_pagevec(&pvec);
- pagevec_release(&pvec);
- pvec.nr = PAGEVEC_SIZE;
- cond_resched();
- }
- return index;
-}
-
-static loff_t shmem_file_llseek(struct file *file, loff_t offset, int origin)
-{
- struct address_space *mapping;
- struct inode *inode;
- pgoff_t start, end;
- loff_t new_offset;
-
- if (origin != SEEK_DATA && origin != SEEK_HOLE)
- return generic_file_llseek_size(file, offset, origin,
- MAX_LFS_FILESIZE);
- mapping = file->f_mapping;
- inode = mapping->host;
- mutex_lock(&inode->i_mutex);
- /* We're holding i_mutex so we can access i_size directly */
-
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
- offset = -ENXIO;
- else {
- start = offset >> PAGE_CACHE_SHIFT;
- end = (inode->i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- new_offset = shmem_seek_hole_data(mapping, start, end, origin);
- new_offset <<= PAGE_CACHE_SHIFT;
- if (new_offset > offset) {
- if (new_offset < inode->i_size)
- offset = new_offset;
- else if (origin == SEEK_DATA)
- offset = -ENXIO;
- else
- offset = inode->i_size;
- }
- }
-
- if (offset >= 0 && offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
- mutex_unlock(&inode->i_mutex);
- return offset;
-}
-
static long shmem_fallocate(struct file *file, int mode, loff_t offset,
loff_t len)
{
static const struct file_operations shmem_file_operations = {
.mmap = shmem_mmap,
#ifdef CONFIG_TMPFS
- .llseek = shmem_file_llseek,
+ .llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = shmem_file_aio_read,
sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
unsigned long size)
{
- pg_data_t *host_pgdat;
- unsigned long goal;
+ unsigned long goal, limit;
+ unsigned long *p;
+ int nid;
/*
* A page may contain usemaps for other sections preventing the
* page being freed and making a section unremovable while
* from the same section as the pgdat where possible to avoid
* this problem.
*/
- goal = __pa(pgdat) & PAGE_SECTION_MASK;
- host_pgdat = NODE_DATA(early_pfn_to_nid(goal >> PAGE_SHIFT));
- return __alloc_bootmem_node_nopanic(host_pgdat, size,
- SMP_CACHE_BYTES, goal);
+ goal = __pa(pgdat) & (PAGE_SECTION_MASK << PAGE_SHIFT);
+ limit = goal + (1UL << PA_SECTION_SHIFT);
+ nid = early_pfn_to_nid(goal >> PAGE_SHIFT);
+again:
+ p = ___alloc_bootmem_node_nopanic(NODE_DATA(nid), size,
+ SMP_CACHE_BYTES, goal, limit);
+ if (!p && limit) {
+ limit = 0;
+ goto again;
+ }
+ return p;
}
static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
}
/*
- * Called by memory hotplug when all memory in a node is offlined.
+ * Called by memory hotplug when all memory in a node is offlined. Caller must
+ * hold lock_memory_hotplug().
*/
void kswapd_stop(int nid)
{
struct task_struct *kswapd = NODE_DATA(nid)->kswapd;
- if (kswapd)
+ if (kswapd) {
kthread_stop(kswapd);
+ NODE_DATA(nid)->kswapd = NULL;
+ }
}
static int __init kswapd_init(void)
struct machine *machines__findnew(struct rb_root *self, pid_t pid)
{
char path[PATH_MAX];
- const char *root_dir;
+ const char *root_dir = "";
struct machine *machine = machines__find(self, pid);
- if (!machine || machine->pid != pid) {
- if (pid == HOST_KERNEL_ID || pid == DEFAULT_GUEST_KERNEL_ID)
- root_dir = "";
- else {
- if (!symbol_conf.guestmount)
- goto out;
- sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
- if (access(path, R_OK)) {
- pr_err("Can't access file %s\n", path);
- goto out;
- }
- root_dir = path;
+ if (machine && (machine->pid == pid))
+ goto out;
+
+ if ((pid != HOST_KERNEL_ID) &&
+ (pid != DEFAULT_GUEST_KERNEL_ID) &&
+ (symbol_conf.guestmount)) {
+ sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
+ if (access(path, R_OK)) {
+ pr_err("Can't access file %s\n", path);
+ machine = NULL;
+ goto out;
}
- machine = machines__add(self, pid, root_dir);
+ root_dir = path;
}
+ machine = machines__add(self, pid, root_dir);
+
out:
return machine;
}
else
pid = event->ip.pid;
- return perf_session__find_machine(session, pid);
+ return perf_session__findnew_machine(session, pid);
}
return perf_session__find_host_machine(session);
record.data = data;
trace_seq_init(&s);
- pevent_print_event(pevent, &s, &record);
+ pevent_event_info(&s, event, &record);
trace_seq_do_printf(&s);
- printf("\n");
}
void print_event(int cpu, void *data, int size, unsigned long long nsecs,
}
#ifdef __KVM_HAVE_MSI
+static irqreturn_t kvm_assigned_dev_msi(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msi(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
}
dev->host_irq = dev->dev->irq;
- if (request_threaded_irq(dev->host_irq, NULL,
+ if (request_threaded_irq(dev->host_irq, kvm_assigned_dev_msi,
kvm_assigned_dev_thread_msi, 0,
dev->irq_name, dev)) {
pci_disable_msi(dev->dev);
#endif
#ifdef __KVM_HAVE_MSIX
+static irqreturn_t kvm_assigned_dev_msix(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msix(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
for (i = 0; i < dev->entries_nr; i++) {
r = request_threaded_irq(dev->host_msix_entries[i].vector,
- NULL, kvm_assigned_dev_thread_msix,
+ kvm_assigned_dev_msix,
+ kvm_assigned_dev_thread_msix,
0, dev->irq_name, dev);
if (r)
goto err;
OSDN Git Service
