This driver downloads Xilinx FPGA firmware using gpio pins.
It loads Xilinx FPGA bitstream format firmware image and
program the Xilinx FPGA using SelectMAP (parallel) mode.
Signed-off-by: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
source "drivers/staging/dgap/Kconfig"
+source "drivers/staging/gs_fpgaboot/Kconfig"
+
endif # STAGING
obj-$(CONFIG_DGNC) += dgnc/
obj-$(CONFIG_DGAP) += dgap/
obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand/
+obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/
--- /dev/null
+#
+# "xilinx FPGA firmware download, fpgaboot"
+#
+config GS_FPGABOOT
+ tristate "Xilinx FPGA firmware download module"
+ default n
+ help
+ Xilinx FPGA firmware download module
--- /dev/null
+gs_fpga-y += gs_fpgaboot.o io.o
+obj-$(CONFIG_GS_FPGABOOT) += gs_fpga.o
+
+ccflags-$(CONFIG_GS_FPGA_DEBUG) := -DDEBUG
--- /dev/null
+==============================================================================
+Linux Driver Source for Xilinx FPGA firmware download
+==============================================================================
+
+
+TABLE OF CONTENTS.
+
+1. SUMMARY
+2. BACKGROUND
+3. DESIGN
+4. HOW TO USE
+5. REFERENCE
+
+1. SUMMARY
+
+ - Download Xilinx FPGA firmware
+ - This module downloads Xilinx FPGA firmware using gpio pins.
+
+2. BACKGROUND
+
+ An FPGA (Field Programmable Gate Array) is a programmable hardware that is
+ used in various applications. Hardware design needs to programmed through
+ a dedicated device or CPU assisted way (serial or parallel).
+ This driver provides a way to download FPGA firmware.
+
+3. DESIGN
+
+ - load Xilinx FPGA bitstream format[1] firmware image file using
+ kernel firmware framework, request_firmware()
+ - program the Xilinx FPGA using SelectMAP (parallel) mode [2]
+ - FPGA prgram is done by gpio based bit-banging, as an example
+ - platform independent file: gs_fpgaboot.c
+ - platform dependent file: io.c
+
+
+4. HOW TO USE
+
+ $ insmod gs_fpga.ko file="xlinx_fpga_top_bitstream.bit"
+ $ rmmod gs_fpga
+
+5. USE CASE (from a mailing list discussion with Greg)
+
+ a. As a FPGA development support tool,
+ During FPGA firmware development, you need to download a new FPGA
+ image frequently.
+ You would do that with a dedicated JTAG, which usually a limited
+ resource in the lab.
+ However, if you use my driver, you don't have to have a dedicated JTAG.
+ This is a real gain :)
+
+ b. For the FPGA that runs without config after the download, which
+ doesn't talk to any of Linux interfaces (such as PCIE).
+
+ We download FPGA firmware from user triggered or some other way, and that's it.
+ Since that FPGA runs on its own, it doesn't require a linux driver
+ after the download.
+
+ c. For the FPGA that requires config after the download, which talk to
+ any of linux interfaces (such as PCIE)
+
+ Then, this type of FPGA config can be put into device tree and have a
+ separate driver (pcie or others), then THAT driver calls my driver to
+ download FPGA firmware during the Linux boot, the take over the device
+ through the interface.
+
+6. REFERENCE
+
+ 1. Xilinx APP NOTE XAPP583:
+ http://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
+ 2. bitstream file info:
+ http://home.earthlink.net/~davesullins/software/bitinfo.html
--- /dev/null
+TODO:
+ - get bus width input instead of hardcoded bus width
+ - get it reviewed
+
+Please send any patches for this driver to Insop Song<insop.song@gainspeed.com>
+and Greg Kroah-Hartman <gregkh@linuxfoundation.org>.
+And please CC to "Staging subsystem" mail list <devel@driverdev.osuosl.org> too.
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/firmware.h>
+
+#include "gs_fpgaboot.h"
+#include "io.h"
+
+#define DEVICE_NAME "device"
+#define CLASS_NAME "fpgaboot"
+
+static uint8_t bits_magic[] = {
+ 0x0, 0x9, 0xf, 0xf0, 0xf, 0xf0,
+ 0xf, 0xf0, 0xf, 0xf0, 0x0, 0x0, 0x1};
+
+/* fake device for request_firmware */
+static struct platform_device *firmware_pdev;
+
+static char *file = "xlinx_fpga_firmware.bit";
+module_param(file, charp, S_IRUGO);
+MODULE_PARM_DESC(file, "Xilinx FPGA firmware file.");
+
+#ifdef DEBUG_FPGA
+static void datadump(char *msg, void *m, int n)
+{
+ int i;
+ unsigned char *c;
+
+ pr_info("=== %s ===\n", msg);
+
+ c = m;
+
+ for (i = 0; i < n; i++) {
+ if ((i&0xf) == 0)
+ pr_info(KERN_INFO "\n 0x%4x: ", i);
+
+ pr_info("%02X ", c[i]);
+ }
+
+ pr_info("\n");
+}
+#endif /* DEBUG_FPGA */
+
+static void read_bitstream(char *bitdata, char *buf, int *offset, int rdsize)
+{
+ memcpy(buf, bitdata + *offset, rdsize);
+ *offset += rdsize;
+}
+
+static void readinfo_bitstream(char *bitdata, char *buf, int *offset)
+{
+ char tbuf[64];
+ int32_t len;
+
+ /* read section char */
+ read_bitstream(bitdata, tbuf, offset, 1);
+
+ /* read length */
+ read_bitstream(bitdata, tbuf, offset, 2);
+
+ len = tbuf[0] << 8 | tbuf[1];
+
+ read_bitstream(bitdata, buf, offset, len);
+ buf[len] = '\0';
+}
+
+/*
+ * read bitdata length
+ */
+static int readlength_bitstream(char *bitdata, int *lendata, int *offset)
+{
+ char tbuf[64];
+
+ /* read section char */
+ read_bitstream(bitdata, tbuf, offset, 1);
+
+ /* make sure it is section 'e' */
+ if (tbuf[0] != 'e') {
+ pr_err("error: length section is not 'e', but %c\n", tbuf[0]);
+ return -1;
+ }
+
+ /* read 4bytes length */
+ read_bitstream(bitdata, tbuf, offset, 4);
+
+ *lendata = tbuf[0] << 24 | tbuf[1] << 16 |
+ tbuf[2] << 8 | tbuf[3];
+
+ return 0;
+}
+
+
+/*
+ * read first 13 bytes to check bitstream magic number
+ */
+static int readmagic_bitstream(char *bitdata, int *offset)
+{
+ char buf[13];
+ int r;
+
+ read_bitstream(bitdata, buf, offset, 13);
+ r = memcmp(buf, bits_magic, 13);
+ if (r) {
+ pr_err("error: corrupted header");
+ return -1;
+ }
+ pr_info("bitstream file magic number Ok\n");
+
+ *offset = 13; /* magic length */
+
+ return 0;
+}
+
+/*
+ * NOTE: supports only bitstream format
+ */
+static enum fmt_image get_imageformat(struct fpgaimage *fimage)
+{
+ return f_bit;
+}
+
+static void gs_print_header(struct fpgaimage *fimage)
+{
+ pr_info("file: %s\n", fimage->filename);
+ pr_info("part: %s\n", fimage->part);
+ pr_info("date: %s\n", fimage->date);
+ pr_info("time: %s\n", fimage->time);
+ pr_info("lendata: %d\n", fimage->lendata);
+}
+
+static void gs_read_bitstream(struct fpgaimage *fimage)
+{
+ char *bitdata;
+ int size;
+ int offset;
+
+ offset = 0;
+ bitdata = (char *)fimage->fw_entry->data;
+ size = fimage->fw_entry->size;
+
+ readmagic_bitstream(bitdata, &offset);
+ readinfo_bitstream(bitdata, fimage->filename, &offset);
+ readinfo_bitstream(bitdata, fimage->part, &offset);
+ readinfo_bitstream(bitdata, fimage->date, &offset);
+ readinfo_bitstream(bitdata, fimage->time, &offset);
+ readlength_bitstream(bitdata, &fimage->lendata, &offset);
+
+ fimage->fpgadata = bitdata + offset;
+}
+
+static int gs_read_image(struct fpgaimage *fimage)
+{
+ int img_fmt;
+
+ img_fmt = get_imageformat(fimage);
+
+ switch (img_fmt) {
+ case f_bit:
+ pr_info("image is bitstream format\n");
+ gs_read_bitstream(fimage);
+ break;
+ default:
+ pr_err("unsupported fpga image format\n");
+ return -1;
+ };
+
+ gs_print_header(fimage);
+
+ return 0;
+}
+
+static int gs_load_image(struct fpgaimage *fimage, char *file)
+{
+ int err;
+
+ pr_info("load fpgaimage %s\n", file);
+
+ err = request_firmware(&fimage->fw_entry, file, &firmware_pdev->dev);
+ if (err != 0) {
+ pr_err("firmware %s is missing, cannot continue.\n", file);
+ return err;
+ }
+
+ return 0;
+}
+
+static int gs_download_image(struct fpgaimage *fimage, enum wbus bus_bytes)
+{
+ char *bitdata;
+ int size, i, cnt;
+ cnt = 0;
+
+ bitdata = (char *)fimage->fpgadata;
+ size = fimage->lendata;
+
+#ifdef DEBUG_FPGA
+ datadump("bitfile sample", bitdata, 0x100);
+#endif /* DEBUG_FPGA */
+
+ if (!xl_supported_prog_bus_width(bus_bytes)) {
+ pr_err("unsupported program bus width %d\n",
+ bus_bytes);
+ return -1;
+ }
+
+ /* Bring csi_b, rdwr_b Low and program_b High */
+ xl_program_b(1);
+ xl_rdwr_b(0);
+ xl_csi_b(0);
+
+ /* Configuration reset */
+ xl_program_b(0);
+ msleep(20);
+ xl_program_b(1);
+
+ /* Wait for Device Initialization */
+ while (xl_get_init_b() == 0)
+ ;
+
+ pr_info("device init done\n");
+
+ for (i = 0; i < size; i += bus_bytes)
+ xl_shift_bytes_out(bus_bytes, bitdata+i);
+
+ pr_info("program done\n");
+
+ /* Check INIT_B */
+ if (xl_get_init_b() == 0) {
+ pr_err("init_b 0\n");
+ return -1;
+ }
+
+ while (xl_get_done_b() == 0) {
+ if (cnt++ > MAX_WAIT_DONE) {
+ pr_err("init_B %d\n", xl_get_init_b());
+ break;
+ }
+ }
+
+ if (cnt > MAX_WAIT_DONE) {
+ pr_err("fpga download fail\n");
+ return -1;
+ }
+
+ pr_info("download fpgaimage\n");
+
+ /* Compensate for Special Startup Conditions */
+ xl_shift_cclk(8);
+
+ return 0;
+}
+
+static int gs_release_image(struct fpgaimage *fimage)
+{
+ release_firmware(fimage->fw_entry);
+ pr_info("release fpgaimage\n");
+
+ return 0;
+}
+
+/*
+ * NOTE: supports systemmap parallel programming
+ */
+static int gs_set_download_method(struct fpgaimage *fimage)
+{
+ pr_info("set program method\n");
+
+ fimage->dmethod = m_systemmap;
+
+ pr_info("systemmap program method\n");
+
+ return 0;
+}
+
+static int init_driver(void)
+{
+ firmware_pdev = platform_device_register_simple("fpgaboot", -1,
+ NULL, 0);
+ if (IS_ERR(firmware_pdev))
+ return PTR_ERR(firmware_pdev);
+
+ return 0;
+}
+
+static void finish_driver(void)
+{
+ platform_device_unregister(firmware_pdev);
+}
+
+static int gs_fpgaboot(void)
+{
+ int err;
+ struct fpgaimage *fimage;
+
+ fimage = kmalloc(sizeof(struct fpgaimage), GFP_KERNEL);
+ if (fimage == NULL) {
+ pr_err("No memory is available\n");
+ goto err_out;
+ }
+
+ err = gs_load_image(fimage, file);
+ if (err) {
+ pr_err("gs_load_image error\n");
+ goto err_out1;
+ }
+
+ err = gs_read_image(fimage);
+ if (err) {
+ pr_err("gs_read_image error\n");
+ goto err_out2;
+ }
+
+ err = gs_set_download_method(fimage);
+ if (err) {
+ pr_err("gs_set_download_method error\n");
+ goto err_out2;
+ }
+
+ err = gs_download_image(fimage, bus_2byte);
+ if (err) {
+ pr_err("gs_download_image error\n");
+ goto err_out2;
+ }
+
+ err = gs_release_image(fimage);
+ if (err) {
+ pr_err("gs_release_image error\n");
+ goto err_out1;
+ }
+
+ kfree(fimage);
+ return 0;
+
+err_out2:
+ err = gs_release_image(fimage);
+ if (err)
+ pr_err("gs_release_image error\n");
+err_out1:
+ kfree(fimage);
+
+err_out:
+ return -1;
+
+}
+
+static int __init gs_fpgaboot_init(void)
+{
+ int err, r;
+
+ r = -1;
+
+ pr_info("FPGA DOWNLOAD --->\n");
+ pr_info("built at %s UTC\n", __TIMESTAMP__);
+
+ pr_info("FPGA image file name: %s\n", file);
+
+ err = init_driver();
+ if (err != 0) {
+ pr_err("FPGA DRIVER INIT FAIL!!\n");
+ return r;
+ }
+
+ err = xl_init_io();
+ if (err) {
+ pr_err("GPIO INIT FAIL!!\n");
+ r = -1;
+ goto errout;
+ }
+
+ err = gs_fpgaboot();
+ if (err) {
+ pr_err("FPGA DOWNLOAD FAIL!!\n");
+ r = -1;
+ goto errout;
+ }
+
+ pr_info("FPGA DOWNLOAD DONE <---\n");
+
+ r = 0;
+ return r;
+
+errout:
+ finish_driver();
+
+ return r;
+}
+
+static void __exit gs_fpgaboot_exit(void)
+{
+ finish_driver();
+ pr_info("FPGA image download module removed\n");
+}
+
+module_init(gs_fpgaboot_init);
+module_exit(gs_fpgaboot_exit);
+
+MODULE_AUTHOR("Insop Song");
+MODULE_DESCRIPTION("Xlinix FPGA firmware download");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/firmware.h>
+
+#define MAX_STR 256
+
+enum fmt_image {
+ f_bit, /* only bitstream is supported */
+ f_rbt,
+ f_bin,
+ f_mcs,
+ f_hex,
+};
+
+enum mdownload {
+ m_systemmap, /* only system map is supported */
+ m_serial,
+ m_jtag,
+};
+
+/*
+ * xilinx fpgaimage information
+ * NOTE: use MAX_STR instead of dynamic alloc for simplicity
+ */
+struct fpgaimage {
+ enum fmt_image fmt_img;
+ enum mdownload dmethod;
+
+ const struct firmware *fw_entry;
+
+ /*
+ * the followings can be read from bitstream,
+ * but other image format should have as well
+ */
+ char filename[MAX_STR];
+ char part[MAX_STR];
+ char date[MAX_STR];
+ char time[MAX_STR];
+ int32_t lendata;
+ char *fpgadata;
+};
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+
+#include "io.h"
+
+#ifdef CONFIG_B4860G100
+static struct gpiobus gbus;
+#endif /* CONFIG_B4860G100 */
+
+static inline void byte0_out(unsigned char data);
+static inline void byte1_out(unsigned char data);
+static inline void xl_cclk_b(int32_t i);
+
+
+/* Assert and Deassert CCLK */
+void xl_shift_cclk(int count)
+{
+ int i;
+ for (i = 0; i < count; i++) {
+ xl_cclk_b(1);
+ xl_cclk_b(0);
+ }
+}
+
+int xl_supported_prog_bus_width(enum wbus bus_bytes)
+{
+ switch (bus_bytes) {
+ case bus_1byte:
+ break;
+ case bus_2byte:
+ break;
+ default:
+ pr_err("unsupported program bus width %d\n",
+ bus_bytes);
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Serialize byte and clock each bit on target's DIN and CCLK pins */
+void xl_shift_bytes_out(enum wbus bus_byte, unsigned char *pdata)
+{
+ /*
+ * supports 1 and 2 bytes programming mode
+ */
+ if (likely(bus_byte == bus_2byte))
+ byte0_out(pdata[0]);
+
+ byte1_out(pdata[1]);
+ xl_shift_cclk(1);
+}
+
+/*
+ * generic bit swap for xilinx SYSTEMMAP FPGA programming
+ */
+static inline unsigned char bitswap(unsigned char s)
+{
+ unsigned char d;
+ d = (((s&0x80)>>7) | ((s&0x40)>>5) | ((s&0x20)>>3) | ((s&0x10)>>1) |
+ ((s&0x08)<<1) | ((s&0x04)<<3) | ((s&0x02)<<5) | ((s&0x01)<<7));
+ return d;
+}
+
+#ifdef CONFIG_B4860G100
+/*
+ * ======================================================================
+ * board specific configuration
+ */
+
+static inline void mpc85xx_gpio_set_dir(
+ int32_t port,
+ uint32_t mask,
+ uint32_t dir)
+{
+ dir |= (in_be32(gbus.r[port]+GPDIR) & ~mask);
+ out_be32(gbus.r[port]+GPDIR, dir);
+}
+
+static inline void mpc85xx_gpio_set(int32_t port, uint32_t mask, uint32_t val)
+{
+ /* First mask off the unwanted parts of "dir" and "val" */
+ val &= mask;
+
+ /* Now read in the values we're supposed to preserve */
+ val |= (in_be32(gbus.r[port]+GPDAT) & ~mask);
+
+ out_be32(gbus.r[port]+GPDAT, val);
+}
+
+static inline uint32_t mpc85xx_gpio_get(int32_t port, uint32_t mask)
+{
+ /* Read the requested values */
+ return in_be32(gbus.r[port]+GPDAT) & mask;
+}
+
+static inline void mpc85xx_gpio_set_low(int32_t port, uint32_t gpios)
+{
+ mpc85xx_gpio_set(port, gpios, 0x00000000);
+}
+
+static inline void mpc85xx_gpio_set_high(int32_t port, uint32_t gpios)
+{
+ mpc85xx_gpio_set(port, gpios, 0xFFFFFFFF);
+}
+
+static inline void gpio_set_value(int32_t port, uint32_t gpio, uint32_t value)
+{
+ int32_t g;
+ g = 31 - gpio;
+ if (value)
+ mpc85xx_gpio_set_high(port, 1U << g);
+ else
+ mpc85xx_gpio_set_low(port, 1U << g);
+}
+
+static inline int gpio_get_value(int32_t port, uint32_t gpio)
+{
+ int32_t g;
+ g = 31 - gpio;
+ return !!mpc85xx_gpio_get(port, 1U << g);
+}
+
+static inline void xl_cclk_b(int32_t i)
+{
+ gpio_set_value(XL_CCLK_PORT, XL_CCLK_PIN, i);
+}
+
+void xl_program_b(int32_t i)
+{
+ gpio_set_value(XL_PROGN_PORT, XL_PROGN_PIN, i);
+}
+
+void xl_rdwr_b(int32_t i)
+{
+ gpio_set_value(XL_RDWRN_PORT, XL_RDWRN_PIN, i);
+}
+
+void xl_csi_b(int32_t i)
+{
+ gpio_set_value(XL_CSIN_PORT, XL_CSIN_PIN, i);
+}
+
+int xl_get_init_b(void)
+{
+ return gpio_get_value(XL_INITN_PORT, XL_INITN_PIN);
+}
+
+int xl_get_done_b(void)
+{
+ return gpio_get_value(XL_DONE_PORT, XL_DONE_PIN);
+}
+
+
+/* G100 specific bit swap and remmap (to gpio pins) for byte 0 */
+static inline uint32_t bit_remap_byte0(uint32_t s)
+{
+ uint32_t d;
+ d = (((s&0x80)>>7) | ((s&0x40)>>5) | ((s&0x20)>>3) | ((s&0x10)>>1) |
+ ((s&0x08)<<1) | ((s&0x04)<<3) | ((s&0x02)<<6) | ((s&0x01)<<9));
+ return d;
+}
+
+/*
+ * G100 specific MSB, in this order [byte0 | byte1], out
+ */
+static inline void byte0_out(unsigned char data)
+{
+ uint32_t swap32;
+ swap32 = bit_remap_byte0((uint32_t) data) << 8;
+
+ mpc85xx_gpio_set(0, 0x0002BF00, (uint32_t) swap32);
+}
+
+/*
+ * G100 specific LSB, in this order [byte0 | byte1], out
+ */
+static inline void byte1_out(unsigned char data)
+{
+ mpc85xx_gpio_set(0, 0x000000FF, (uint32_t) bitswap(data));
+}
+
+/*
+ * configurable per device type for different I/O config
+ */
+int xl_init_io()
+{
+ struct device_node *np;
+ const u32 *p_reg;
+ int reg, cnt;
+
+ cnt = 0;
+ memset(&gbus, 0, sizeof(struct gpiobus));
+ for_each_compatible_node(np, NULL, "fsl,qoriq-gpio") {
+ p_reg = of_get_property(np, "reg", NULL);
+ if (p_reg == NULL)
+ break;
+ reg = (int) *p_reg;
+ gbus.r[cnt] = of_iomap(np, 0);
+
+ if (!gbus.r[cnt]) {
+ pr_err("not findding gpio cell-index %d\n", cnt);
+ return -ENODEV;
+ }
+ cnt++;
+ }
+ mpc85xx_gpio_set_dir(0, 0x0002BFFF, 0x0002BFFF);
+ mpc85xx_gpio_set_dir(1, 0x00240060, 0x00240060);
+
+ gbus.ngpio = cnt;
+
+ return 0;
+}
+
+
+#else /* placeholder for boards with different config */
+
+void xl_program_b(int32_t i)
+{
+ return;
+}
+
+void xl_rdwr_b(int32_t i)
+{
+ return;
+}
+
+void xl_csi_b(int32_t i)
+{
+ return;
+}
+
+int xl_get_init_b(void)
+{
+ return -1;
+}
+
+int xl_get_done_b(void)
+{
+ return -1;
+}
+
+static inline void byte0_out(unsigned char data)
+{
+ return;
+}
+
+static inline void byte1_out(unsigned char data)
+{
+ return;
+}
+
+static inline void xl_cclk_b(int32_t i)
+{
+ return;
+}
+
+/*
+ * configurable per device type for different I/O config
+ */
+int xl_init_io()
+{
+ return -1;
+}
+
+#endif /* CONFIG_B4860G100 */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define GPDIR 0
+#define GPCFG 4 /* open drain or not */
+#define GPDAT 8
+
+/*
+ * gpio port and pin definitions
+ * NOTE: port number starts from 0
+ */
+#define XL_INITN_PORT 1
+#define XL_INITN_PIN 14
+#define XL_RDWRN_PORT 1
+#define XL_RDWRN_PIN 13
+#define XL_CCLK_PORT 1
+#define XL_CCLK_PIN 10
+#define XL_PROGN_PORT 1
+#define XL_PROGN_PIN 25
+#define XL_CSIN_PORT 1
+#define XL_CSIN_PIN 26
+#define XL_DONE_PORT 1
+#define XL_DONE_PIN 27
+
+/*
+ * gpio mapping
+ *
+ XL_config_D0 – gpio1_31
+ Xl_config_d1 – gpio1_30
+ Xl_config_d2 – gpio1_29
+ Xl_config_d3 – gpio1_28
+ Xl_config_d4 – gpio1_27
+ Xl_config_d5 – gpio1_26
+ Xl_config_d6 – gpio1_25
+ Xl_config_d7 – gpio1_24
+ Xl_config_d8 – gpio1_23
+ Xl_config_d9 – gpio1_22
+ Xl_config_d10 – gpio1_21
+ Xl_config_d11 – gpio1_20
+ Xl_config_d12 – gpio1_19
+ Xl_config_d13 – gpio1_18
+ Xl_config_d14 – gpio1_16
+ Xl_config_d15 – gpio1_14
+*
+*/
+
+/*
+ * program bus width in bytes
+ */
+enum wbus {
+ bus_1byte = 1,
+ bus_2byte = 2,
+};
+
+
+#define MAX_WAIT_DONE 10000
+
+
+struct gpiobus {
+ int ngpio;
+ void __iomem *r[4];
+};
+
+int xl_supported_prog_bus_width(enum wbus bus_bytes);
+
+void xl_program_b(int32_t i);
+void xl_rdwr_b(int32_t i);
+void xl_csi_b(int32_t i);
+
+int xl_get_init_b(void);
+int xl_get_done_b(void);
+
+void xl_shift_cclk(int count);
+void xl_shift_bytes_out(enum wbus bus_byte, unsigned char *pdata);
+
+int xl_init_io(void);
OSDN Git Service
