D: Cobalt Networks (x86) support
D: This-and-That
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
N: Dirk Hohndel
E: hohndel@suse.de
D: The XFree86[tm] Project
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
- Prefix: 'lm75'
+ Prefix: 'tcn75'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
F: drivers/platform/x86/asus*.c
F: drivers/platform/x86/eeepc*.c
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: lm-sensors@lm-sensors.org
-S: Maintained
-F: drivers/hwmon/asb100.c
-
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <djbw@fb.com>
W: http://sourceforge.net/projects/xscaleiop
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
S: Maintained
F: drivers/net/ethernet/sis/sis900.*
-SIS 96X I2C/SMBUS DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-sis96x
-F: drivers/i2c/busses/i2c-sis96x.c
-
SIS FRAMEBUFFER DRIVER
M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
+ select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
+ select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
bool
config ARCH_MULTI_V6
- bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
- bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
bool
select ISA_DMA_API
-config ARCH_NO_VIRT_TO_BUS
- def_bool y
- depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
# Select ISA DMA interface
config ISA_DMA_API
bool
nand {
pinctrl_nand: nand-0 {
atmel,pins =
- <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
- 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ <3 0 0x1 0x0 /* PD0 periph A Read Enable */
+ 3 1 0x1 0x0 /* PD1 periph A Write Enable */
+ 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
+ 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
+ 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
+ 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
+ 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
+ 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
+ 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
+ 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
+ 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
+ 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
+ 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
+ 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
+ };
+
+ pinctrl_nand_16bits: nand_16bits-0 {
+ atmel,pins =
+ <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
+ 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
+ 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
+ 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
+ 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
+ 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
+ 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
+ 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
};
};
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
evt->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
- evt->rating = 400;
+ evt->rating = 100;
evt->mult = 1;
evt->set_mode = broadcast_timer_set_mode;
.text
.align 5
- .word 0
-
-1: subs r2, r2, #4 @ 1 do we have enough
- blt 5f @ 1 bytes to align with?
- cmp r3, #2 @ 1
- strltb r1, [ip], #1 @ 1
- strleb r1, [ip], #1 @ 1
- strb r1, [ip], #1 @ 1
- add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted. Try doing the
- * memset again.
- */
ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
- mov ip, r0
- ands r3, ip, #3 @ 1 unaligned?
- bne 1b @ 1
+ ands r3, r0, #3 @ 1 unaligned?
+ mov ip, r0 @ preserve r0 as return value
+ bne 6f @ 1
/*
* we know that the pointer in ip is aligned to a word boundary.
*/
- orr r1, r1, r1, lsl #8
+1: orr r1, r1, r1, lsl #8
orr r1, r1, r1, lsl #16
mov r3, r1
cmp r2, #16
tst r2, #1
strneb r1, [ip], #1
mov pc, lr
+
+6: subs r2, r2, #4 @ 1 do we have enough
+ blt 5b @ 1 bytes to align with?
+ cmp r3, #2 @ 1
+ strltb r1, [ip], #1 @ 1
+ strleb r1, [ip], #1 @ 1
+ strb r1, [ip], #1 @ 1
+ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
+ b 1b
ENDPROC(memset)
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
#endif /* __ASSEMBLY__ */
#endif
void at91_irq_suspend(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable enabled irqs */
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable wakeup irqs */
- i = 0;
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *backups);
void at91_irq_resume(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable wakeup irqs */
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable irqs disabled for suspend */
- i = 0;
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *wakeups);
static int at91_pm_enter(suspend_state_t state)
{
- at91_gpio_suspend();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_suspend();
+ else
+ at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
- at91_gpio_resume();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_resume();
+ else
+ at91_gpio_resume();
return 0;
}
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);
select ISA
select ISA_DMA
select PCI
+ select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
NULL
};
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
.name = "pcmcdclk",
};
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
static struct clk init_clocks_off[] = {
{
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
.name = "rot",
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1<<19),
};
+static struct clk clk_pdma0 = {
+ .name = "pdma0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "pdma1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
&clk_hsmmc1,
&clk_hsmmc2,
&clk_hsmmc3,
+ &clk_pdma0,
+ &clk_pdma1,
};
/* Clock initialisation code */
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
};
void __init s5pv210_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
- s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .bus_type = FIMC_BUS_TYPE_ITU_601,
+ .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/usb/otg.h>
/* x = ((*(frame + k)) & 0xf) << 2; */
ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
/* the interpreter should deal with the negative K */
- if (k < 0)
+ if ((int)k < 0)
return -1;
/* offset in r1: we might have to take the slow path */
emit_mov_i(r_off, k, ctx);
config PPC
bool
default y
+ select BINFMT_ELF
select OF
select OF_EARLY_FLATTREE
select HAVE_FTRACE_MCOUNT_RECORD
/*
* VSID allocation (256MB segment)
*
- * We first generate a 38-bit "proto-VSID". For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
*
- * This splits the proto-VSID into the below range
- * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
*
* The proto-VSIDs are then scrambled into real VSIDs with the
* multiplicative hash:
* VSID_MULTIPLIER is prime, so in particular it is
* co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
* Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- * - We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
*
- * - We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS bits of context for user addresses.
- * i.e. 64T (46 bits) of address space for up to half a million contexts.
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
*
- * - The scramble function gives robust scattering in the hash
- * table (at least based on some initial results). The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
*/
+#define CONTEXT_BITS 19
+#define ESID_BITS 18
+#define ESID_BITS_1T 6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
/*
* This should be computed such that protovosid * vsid_mulitplier
* doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
*/
#define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_256M 38
+#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS)
#define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1)
#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_1T 26
+#define VSID_BITS_1T (CONTEXT_BITS + ESID_BITS_1T)
#define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1)
-#define CONTEXT_BITS 19
-#define USER_ESID_BITS 18
-#define USER_ESID_BITS_1T 6
-#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT))
/*
* This macro generates asm code to compute the VSID scramble
srdi rx,rt,VSID_BITS_##size; \
clrldi rt,rt,(64-VSID_BITS_##size); \
add rt,rt,rx; /* add high and low bits */ \
- /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
+ /* NOTE: explanation based on VSID_BITS_##size = 36 \
+ * Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
* 2^36-1+2^28-1. That in particular means that if r3 >= \
* 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \
* the bit clear, r3 already has the answer we want, if it \
})
#endif /* 1 */
-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
- unsigned long proto_vsid;
- /*
- * We need to make sure proto_vsid for the kernel is
- * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
- */
- if (ssize == MMU_SEGSIZE_256M) {
- proto_vsid = ea >> SID_SHIFT;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
- return vsid_scramble(proto_vsid, 256M);
- }
- proto_vsid = ea >> SID_SHIFT_1T;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
- return vsid_scramble(proto_vsid, 1T);
-}
-
/* Returns the segment size indicator for a user address */
static inline int user_segment_size(unsigned long addr)
{
return MMU_SEGSIZE_256M;
}
-/* This is only valid for user addresses (which are below 2^44) */
static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
int ssize)
{
+ /*
+ * Bad address. We return VSID 0 for that
+ */
+ if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+ return 0;
+
if (ssize == MMU_SEGSIZE_256M)
- return vsid_scramble((context << USER_ESID_BITS)
+ return vsid_scramble((context << ESID_BITS)
| (ea >> SID_SHIFT), 256M);
- return vsid_scramble((context << USER_ESID_BITS_1T)
+ return vsid_scramble((context << ESID_BITS_1T)
| (ea >> SID_SHIFT_1T), 1T);
}
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+ unsigned long context;
+
+ /*
+ * kernel take the top 4 context from the available range
+ */
+ context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+ return get_vsid(context, ea, ssize);
+}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
_GLOBAL(do_stab_bolted)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+ mfspr r11,SPRN_DAR /* ea */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r11,4,(63 - 46 - 4)
+ li r9,0 /* VSID = 0 for bad address */
+ bne- 0f
+
+ /*
+ * Calculate VSID:
+ * This is the kernel vsid, we take the top for context from
+ * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * Here we know that (ea >> 60) == 0xc
+ */
+ lis r9,(MAX_USER_CONTEXT + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+ srdi r10,r11,SID_SHIFT
+ rldimi r10,r9,ESID_BITS,0 /* proto vsid */
+ ASM_VSID_SCRAMBLE(r10, r9, 256M)
+ rldic r9,r10,12,16 /* r9 = vsid << 12 */
+
+0:
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
+ srdi r11,r11,SID_SHIFT
rldimi r10,r11,7,52 /* r10 = first ste of the group */
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID | 1 << 37 */
- li r9,0x1
- rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
{
}
#else
-static void __reloc_toc(void *tocstart, unsigned long offset,
- unsigned long nr_entries)
+static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
{
unsigned long i;
- unsigned long *toc_entry = (unsigned long *)tocstart;
+ unsigned long *toc_entry;
+
+ /* Get the start of the TOC by using r2 directly. */
+ asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
for (i = 0; i < nr_entries; i++) {
*toc_entry = *toc_entry + offset;
unsigned long nr_entries =
(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
- /* Need to add offset to get at __prom_init_toc_start */
- __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries);
+ __reloc_toc(offset, nr_entries);
mb();
}
mb();
- /* __prom_init_toc_start has been relocated, no need to add offset */
- __reloc_toc(__prom_init_toc_start, -offset, nr_entries);
+ __reloc_toc(-offset, nr_entries);
}
#endif
#endif
brk.address = bp_info->addr & ~7UL;
brk.type = HW_BRK_TYPE_TRANSLATE;
+ brk.len = 8;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
brk.type |= HW_BRK_TYPE_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
vcpu3s->context_id[0] = err;
vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
- << USER_ESID_BITS) - 1;
- vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+ << ESID_BITS) - 1;
+ vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
kvmppc_mmu_hpte_init(vcpu);
unsigned long vpn = hpt_vpn(vaddr, vsid, ssize);
unsigned long tprot = prot;
+ /*
+ * If we hit a bad address return error.
+ */
+ if (!vsid)
+ return -1;
/* Make kernel text executable */
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
/* Initialize stab / SLB management */
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
+ else
+ stab_initialize(get_paca()->stab_real);
}
#ifdef CONFIG_SMP
DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
ea, access, trap);
- if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
- DBG_LOW(" out of pgtable range !\n");
- return 1;
- }
-
/* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
}
DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
+ /* Bad address. */
+ if (!vsid) {
+ DBG_LOW("Bad address!\n");
+ return 1;
+ }
/* Get pgdir */
pgdir = mm->pgd;
if (pgdir == NULL)
/* Get VSID */
ssize = user_segment_size(ea);
vsid = get_vsid(mm->context.id, ea, ssize);
+ if (!vsid)
+ return;
/* Hash doesn't like irqs */
local_irq_save(flags);
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+ /* Don't create HPTE entries for bad address */
+ if (!vsid)
+ return;
ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
mode, HPTE_V_BOLTED,
mmu_linear_psize, mmu_kernel_ssize);
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1)
-
int __init_new_context(void)
{
int index;
else if (err)
return err;
- if (index > MAX_CONTEXT) {
+ if (index > MAX_USER_CONTEXT) {
spin_lock(&mmu_context_lock);
ida_remove(&mmu_context_ida, index);
spin_unlock(&mmu_context_lock);
#endif
#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
#endif
* No other registers are examined or changed.
*/
_GLOBAL(slb_allocate_realmode)
- /* r3 = faulting address */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r3,4,(63 - 46 - 4)
+ bne- 8f
srdi r9,r3,60 /* get region */
- srdi r10,r3,28 /* get esid */
+ srdi r10,r3,SID_SHIFT /* get esid */
cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */
/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
*/
_GLOBAL(slb_miss_kernel_load_linear)
li r11,0
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
_GLOBAL(slb_miss_kernel_load_io)
li r11,0
6:
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T
-0: /* user address: proto-VSID = context << 15 | ESID. First check
- * if the address is within the boundaries of the user region
- */
- srdi. r9,r10,USER_ESID_BITS
- bne- 8f /* invalid ea bits set */
-
-
+0:
/* when using slices, we extract the psize off the slice bitmaps
* and then we need to get the sllp encoding off the mmu_psize_defs
* array.
ld r9,PACACONTEXTID(r13)
BEGIN_FTR_SECTION
cmpldi r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
- rldimi r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
bge slb_finish_load_1T
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
b slb_finish_load
8: /* invalid EA */
li r10,0 /* BAD_VSID */
+ li r9,0 /* BAD_VSID */
li r11,SLB_VSID_USER /* flags don't much matter */
b slb_finish_load
/* get context to calculate proto-VSID */
ld r9,PACACONTEXTID(r13)
- rldimi r10,r9,USER_ESID_BITS,0
-
/* fall through slb_finish_load */
#endif /* __DISABLED__ */
/*
* Finish loading of an SLB entry and return
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
*/
slb_finish_load:
+ rldimi r10,r9,ESID_BITS,0
ASM_VSID_SCRAMBLE(r10,r9,256M)
/*
* bits above VSID_BITS_256M need to be ignored from r10
/*
* Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
*/
slb_finish_load_1T:
- srdi r10,r10,40-28 /* get 1T ESID */
+ srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */
+ rldimi r10,r9,ESID_BITS_1T,0
ASM_VSID_SCRAMBLE(r10,r9,1T)
/*
* bits above VSID_BITS_1T need to be ignored from r10
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
vsid = get_vsid(mm->context.id, addr, ssize);
- WARN_ON(vsid == 0);
} else {
vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
ssize = mmu_kernel_ssize;
}
+ WARN_ON(vsid == 0);
vpn = hpt_vpn(addr, vsid, ssize);
rpte = __real_pte(__pte(pte), ptep);
return IRQ_HANDLED;
};
-static int __devinit gpio_halt_probe(struct platform_device *pdev)
+static int gpio_halt_probe(struct platform_device *pdev)
{
enum of_gpio_flags flags;
struct device_node *node = pdev->dev.of_node;
return 0;
}
-static int __devexit gpio_halt_remove(struct platform_device *pdev)
+static int gpio_halt_remove(struct platform_device *pdev)
{
if (halt_node) {
int gpio = of_get_gpio(halt_node, 0);
.of_match_table = gpio_halt_match,
},
.probe = gpio_halt_probe,
- .remove = __devexit_p(gpio_halt_remove),
+ .remove = gpio_halt_remove,
};
module_platform_driver(gpio_halt_driver);
select PPC_HAVE_PMU_SUPPORT
config POWER3
- bool
depends on PPC64 && PPC_BOOK3S
- default y if !POWER4_ONLY
+ def_bool y
config POWER4
depends on PPC64 && PPC_BOOK3S
but somewhat slower on other machines. This option only changes
the scheduling of instructions, not the selection of instructions
itself, so the resulting kernel will keep running on all other
- machines. When building a kernel that is supposed to run only
- on Cell, you should also select the POWER4_ONLY option.
+ machines.
# this is temp to handle compat with arch=ppc
config 8xx
u32 reserved[4];
} __packed;
+#define EQC_WR_PROHIBIT 22
+
struct msb {
u8 fmt:4;
u8 oc:4;
#define OP_STATE_TEMP_ERR 2
#define OP_STATE_PERM_ERR 3
+enum scm_event {SCM_CHANGE, SCM_AVAIL};
+
struct scm_driver {
struct device_driver drv;
int (*probe) (struct scm_device *scmdev);
int (*remove) (struct scm_device *scmdev);
- void (*notify) (struct scm_device *scmdev);
+ void (*notify) (struct scm_device *scmdev, enum scm_event event);
void (*handler) (struct scm_device *scmdev, void *data, int error);
};
static inline void __tlb_flush_mm(struct mm_struct * mm)
{
- if (unlikely(cpumask_empty(mm_cpumask(mm))))
- return;
/*
* If the machine has IDTE we prefer to do a per mm flush
* on all cpus instead of doing a local flush if the mm
UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
mcck_skip:
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
- mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+ stm %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
stm %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
l %r1,BASED(.Ldo_machine_check)
UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
LAST_BREAK %r14
mcck_skip:
- lghi %r14,__LC_GPREGS_SAVE_AREA
- mvc __PT_R0(128,%r11),0(%r14)
+ lghi %r14,__LC_GPREGS_SAVE_AREA+64
+ stmg %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
/* Split remaining virtual space between 1:1 mapping & vmemmap array */
tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
+ /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
+ tmp = SECTION_ALIGN_UP(tmp);
tmp = VMALLOC_START - tmp * sizeof(struct page);
tmp &= ~((vmax >> 11) - 1); /* align to page table level */
tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
EXPORT_SYMBOL(tegra_ahb_enable_smmu);
#endif
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
static int tegra_ahb_suspend(struct device *dev)
{
int i;
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3375) },
+ { USB_DEVICE(0x04CA, 0x3004) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
divisor = parent_rate / rate;
/* If prate / rate would be decimal, incr the divisor */
- if (rate * divisor < *prate)
+ if (rate * divisor < parent_rate)
divisor++;
if (divisor == cdev->div_mask + 1)
which contains this code, we don't worry about the wasted space.
*/
-#include <linux/hwmon.h>
+#include <linux/kernel.h>
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
menuconfig I2C
tristate "I2C support"
- depends on !S390
select RT_MUTEXES
---help---
I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ depends on GENERIC_HARDIRQS
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
config I2C_OCORES
tristate "OpenCores I2C Controller"
+ depends on GENERIC_HARDIRQS
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on PARPORT
+ depends on PARPORT && GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
+ depends on GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
neigh = dst_neigh_lookup(ep->dst,
&ep->com.cm_id->remote_addr.sin_addr.s_addr);
+ if (!neigh) {
+ pr_err("%s - cannot alloc neigh.\n", __func__);
+ err = -ENOMEM;
+ goto fail4;
+ }
+
/* get a l2t entry */
if (neigh->dev->flags & IFF_LOOPBACK) {
PDBG("%s LOOPBACK\n", __func__);
dst = &rt->dst;
neigh = dst_neigh_lookup_skb(dst, skb);
+ if (!neigh) {
+ pr_err("%s - failed to allocate neigh!\n",
+ __func__);
+ goto free_dst;
+ }
+
if (neigh->dev->flags & IFF_LOOPBACK) {
pdev = ip_dev_find(&init_net, iph->daddr);
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
#define GET_TIME(x) rdtscl(x)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__)
+#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
-#define TIME_NAME "PCC"
-#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE)
-#define GET_TIME(x) do { x = get_cycles(); } while (0)
-#define DELTA(x, y) ((x) - (y))
-#define TIME_NAME "TSC"
+#define TIME_NAME "get_cycles"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
Technologies.
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
from Traverse Technologies.
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
+/*
+ * Amount of bytes we read when analyzing each block of flash memory.
+ * Set it big enough to allow detecting partition and reading important data.
+ */
+#define BCM47XXPART_BYTES_TO_READ 0x404
+
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
#define POT_MAGIC1 0x54544f50 /* POTT */
struct trx_header *trx;
int trx_part = -1;
int last_trx_part = -1;
- int max_bytes_to_read = 0x8004;
+ int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
if (blocksize <= 0x10000)
blocksize = 0x10000;
- if (blocksize == 0x20000)
- max_bytes_to_read = 0x18004;
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
- buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
+ buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
}
/* Read beginning of the block */
- if (mtd_read(master, offset, max_bytes_to_read,
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
&bytes_read, (uint8_t *)buf) < 0) {
pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
offset);
continue;
}
- /* Standard NVRAM */
- if (buf[0x000 / 4] == NVRAM_HEADER ||
- buf[0x1000 / 4] == NVRAM_HEADER ||
- buf[0x8000 / 4] == NVRAM_HEADER ||
- (blocksize == 0x20000 && (
- buf[0x10000 / 4] == NVRAM_HEADER ||
- buf[0x11000 / 4] == NVRAM_HEADER ||
- buf[0x18000 / 4] == NVRAM_HEADER))) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- offset, 0);
- offset = rounddown(offset, blocksize);
- continue;
- }
-
/*
* board_data starts with board_id which differs across boards,
* but we can use 'MPFR' (hopefully) magic at 0x100
continue;
}
}
+
+ /* Look for NVRAM at the end of the last block. */
+ for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
+ if (curr_part > BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+ break;
+ }
+
+ offset = master->size - possible_nvram_sizes[i];
+ if (mtd_read(master, offset, 0x4, &bytes_read,
+ (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while reading at offset 0x%X!\n",
+ offset);
+ continue;
+ }
+
+ /* Standard NVRAM */
+ if (buf[0] == NVRAM_HEADER) {
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ master->size - blocksize, 0);
+ break;
+ }
+ }
+
kfree(buf);
/*
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},
/*
* These are the new chips with large page size. The pagesize and the
bond_compute_features(bond);
+ bond_update_speed_duplex(new_slave);
+
read_lock(&bond->lock);
new_slave->last_arp_rx = jiffies -
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
- bond_update_speed_duplex(new_slave);
-
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bond_set_backup_slave(slave);
}
- bond_update_speed_duplex(slave);
-
pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
bond->dev->name, slave->dev->name,
slave->speed, slave->duplex ? "full" : "half");
bp->port.pmf = 0;
load_error1:
bnx2x_napi_disable(bp);
+ bnx2x_del_all_napi(bp);
/* clear pf_load status, as it was already set */
if (IS_PF(bp))
#define UPDATE_QSTAT(s, t) \
do { \
- qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi); \
qstats->t##_lo = qstats_old->t##_lo + le32_to_cpu(s.lo); \
+ qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi) \
+ + ((qstats->t##_lo < qstats_old->t##_lo) ? 1 : 0); \
} while (0)
#define UPDATE_QSTAT_OLD(f) \
tp->link_config.active_speed = tp->link_config.speed;
tp->link_config.active_duplex = tp->link_config.duplex;
+ if (tg3_asic_rev(tp) == ASIC_REV_5714) {
+ /* With autoneg disabled, 5715 only links up when the
+ * advertisement register has the configured speed
+ * enabled.
+ */
+ tg3_writephy(tp, MII_ADVERTISE, ADVERTISE_ALL);
+ }
+
bmcr = 0;
switch (tp->link_config.speed) {
default:
}
#define EEPROM_STAT_ADDR 0x7bfc
-#define VPD_BASE 0
#define VPD_LEN 512
+#define VPD_BASE 0x400
+#define VPD_BASE_OLD 0
/**
* t4_seeprom_wp - enable/disable EEPROM write protection
int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
{
u32 cclk_param, cclk_val;
- int i, ret;
+ int i, ret, addr;
int ec, sn;
u8 *vpd, csum;
unsigned int vpdr_len, kw_offset, id_len;
if (!vpd)
return -ENOMEM;
- ret = pci_read_vpd(adapter->pdev, VPD_BASE, VPD_LEN, vpd);
+ ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
+ if (ret < 0)
+ goto out;
+ addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD;
+
+ ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
if (ret < 0)
goto out;
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on (PCI || EISA)
+ depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
goto spin_unlock;
}
- /* Duplex link change */
if (phy_dev->link) {
- if (fep->full_duplex != phy_dev->duplex) {
- fec_restart(ndev, phy_dev->duplex);
- /* prevent unnecessary second fec_restart() below */
+ if (!fep->link) {
fep->link = phy_dev->link;
status_change = 1;
}
- }
- /* Link on or off change */
- if (phy_dev->link != fep->link) {
- fep->link = phy_dev->link;
- if (phy_dev->link)
+ if (fep->full_duplex != phy_dev->duplex)
+ status_change = 1;
+
+ if (phy_dev->speed != fep->speed) {
+ fep->speed = phy_dev->speed;
+ status_change = 1;
+ }
+
+ /* if any of the above changed restart the FEC */
+ if (status_change)
fec_restart(ndev, phy_dev->duplex);
- else
+ } else {
+ if (fep->link) {
fec_stop(ndev);
- status_change = 1;
+ status_change = 1;
+ }
}
spin_unlock:
struct fec_enet_private *fep = netdev_priv(ndev);
/* Don't know what to do yet. */
+ napi_disable(&fep->napi);
fep->opened = 0;
netif_stop_queue(ndev);
fec_stop(ndev);
phy_interface_t phy_interface;
int link;
int full_duplex;
+ int speed;
struct completion mdio_done;
int irq[FEC_IRQ_NUM];
int bufdesc_ex;
return false;
tx_queue->empty_read_count = 0;
- return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
+ return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0
+ && tx_queue->write_count - write_count == 1;
}
/* For each entry inserted into the software descriptor ring, create a
/* If there is no more tx desc left free then we need to
* tell the kernel to stop sending us tx frames.
*/
- if (unlikely(cpdma_check_free_tx_desc(priv->txch)))
+ if (unlikely(!cpdma_check_free_tx_desc(priv->txch)))
netif_stop_queue(ndev);
return NETDEV_TX_OK;
/* If there is no more tx desc left free then we need to
* tell the kernel to stop sending us tx frames.
*/
- if (unlikely(cpdma_check_free_tx_desc(priv->txchan)))
+ if (unlikely(!cpdma_check_free_tx_desc(priv->txchan)))
netif_stop_queue(ndev);
return NETDEV_TX_OK;
goto done;
spin_lock_irqsave(&target_list_lock, flags);
+restart:
list_for_each_entry(nt, &target_list, list) {
netconsole_target_get(nt);
if (nt->np.dev == dev) {
case NETDEV_UNREGISTER:
/*
* rtnl_lock already held
+ * we might sleep in __netpoll_cleanup()
*/
- if (nt->np.dev) {
- __netpoll_cleanup(&nt->np);
- dev_put(nt->np.dev);
- nt->np.dev = NULL;
- }
+ spin_unlock_irqrestore(&target_list_lock, flags);
+ __netpoll_cleanup(&nt->np);
+ spin_lock_irqsave(&target_list_lock, flags);
+ dev_put(nt->np.dev);
+ nt->np.dev = NULL;
nt->enabled = 0;
stopped = true;
- break;
+ netconsole_target_put(nt);
+ goto restart;
}
}
netconsole_target_put(nt);
select CRC16
select CRC32
help
- This option adds support for SMSC LAN95XX based USB 2.0
+ This option adds support for SMSC LAN75XX based USB 2.0
Gigabit Ethernet adapters.
config USB_NET_SMSC95XX
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
- u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM;
+ u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
struct cdc_mbim_state *info = (void *)&dev->data;
- /* see if interface supports MBIM alternate setting */
- if (intf->num_altsetting == 2) {
- if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM);
- data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
- }
-
/* Probably NCM, defer for cdc_ncm_bind */
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
#define DRIVER_VERSION "14-Mar-2012"
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
static void cdc_ncm_txpath_bh(unsigned long param);
static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
}
EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
-static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+/* Select the MBIM altsetting iff it is preferred and available,
+ * returning the number of the corresponding data interface altsetting
+ */
+u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ struct usb_host_interface *alt;
/* The MBIM spec defines a NCM compatible default altsetting,
* which we may have matched:
* endpoint descriptors, shall be constructed according to
* the rules given in section 6 (USB Device Model) of this
* specification."
- *
- * Do not bind to such interfaces, allowing cdc_mbim to handle
- * them
*/
-#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
- if ((intf->num_altsetting == 2) &&
- !usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM)) {
- if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- return -ENODEV;
- else
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_NCM);
+ if (prefer_mbim && intf->num_altsetting == 2) {
+ alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+ if (alt && cdc_ncm_comm_intf_is_mbim(alt) &&
+ !usb_set_interface(dev->udev,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ CDC_NCM_COMM_ALTSETTING_MBIM))
+ return CDC_NCM_DATA_ALTSETTING_MBIM;
}
-#endif
+ return CDC_NCM_DATA_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ /* MBIM backwards compatible function? */
+ cdc_ncm_select_altsetting(dev, intf);
+ if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+ return -ENODEV;
/* NCM data altsetting is always 1 */
ret = cdc_ncm_bind_common(dev, intf, 1);
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state)));
- /* control and data is shared? */
- if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
- info->control = intf;
- info->data = intf;
- goto shared;
- }
-
- /* else require a single interrupt status endpoint on control intf */
- if (intf->cur_altsetting->desc.bNumEndpoints != 1)
- goto err;
+ /* set up initial state */
+ info->control = intf;
+ info->data = intf;
/* and a number of CDC descriptors */
while (len > 3) {
buf += h->bLength;
}
- /* did we find all the required ones? */
- if (!(found & (1 << USB_CDC_HEADER_TYPE)) ||
- !(found & (1 << USB_CDC_UNION_TYPE))) {
- dev_err(&intf->dev, "CDC functional descriptors missing\n");
- goto err;
- }
-
- /* verify CDC Union */
- if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) {
- dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0);
- goto err;
- }
-
- /* need to save these for unbind */
- info->control = intf;
- info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
- if (!info->data) {
- dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0);
- goto err;
+ /* Use separate control and data interfaces if we found a CDC Union */
+ if (cdc_union) {
+ info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
+ if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 || !info->data) {
+ dev_err(&intf->dev, "bogus CDC Union: master=%u, slave=%u\n",
+ cdc_union->bMasterInterface0, cdc_union->bSlaveInterface0);
+ goto err;
+ }
}
/* errors aren't fatal - we can live with the dynamic address */
}
/* claim data interface and set it up */
- status = usb_driver_claim_interface(driver, info->data, dev);
- if (status < 0)
- goto err;
+ if (info->control != info->data) {
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ goto err;
+ }
-shared:
status = qmi_wwan_register_subdriver(dev);
if (status < 0 && info->control != info->data) {
usb_set_intfdata(info->data, NULL);
adhoc_join->bss_descriptor.bssid,
adhoc_join->bss_descriptor.ssid);
- for (i = 0; bss_desc->supported_rates[i] &&
- i < MWIFIEX_SUPPORTED_RATES;
- i++)
- ;
+ for (i = 0; i < MWIFIEX_SUPPORTED_RATES &&
+ bss_desc->supported_rates[i]; i++)
+ ;
rates_size = i;
/* Copy Data Rates from the Rates recorded in scan response */
config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
- depends on PCI || RALINK_RT288X || RALINK_RT305X
+ depends on PCI || SOC_RT288X || SOC_RT305X
select RT2800_LIB
select RT2X00_LIB_PCI if PCI
- select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
+ select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
}
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
{
return -ENOMEM;
}
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
#ifdef CONFIG_PCI
static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
#endif /* CONFIG_PCI */
MODULE_LICENSE("GPL");
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800soc_probe(struct platform_device *pdev)
{
return rt2x00soc_probe(pdev, &rt2800pci_ops);
.suspend = rt2x00soc_suspend,
.resume = rt2x00soc_resume,
};
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
#ifdef CONFIG_PCI
static int rt2800pci_probe(struct pci_dev *pci_dev,
{
int ret = 0;
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
ret = platform_driver_register(&rt2800soc_driver);
if (ret)
return ret;
#ifdef CONFIG_PCI
ret = pci_register_driver(&rt2800pci_driver);
if (ret) {
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
return ret;
#ifdef CONFIG_PCI
pci_unregister_driver(&rt2800pci_driver);
#endif
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
}
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
{
- /* dummy routine needed for callback from rtl_op_configure_filter() */
-}
-
-/*========================================================================== */
-
-static void _rtl92cu_set_check_bssid(struct ieee80211_hw *hw,
- enum nl80211_iftype type)
-{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
- u8 filterout_non_associated_bssid = false;
+ u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
- switch (type) {
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_STATION:
- filterout_non_associated_bssid = true;
- break;
- case NL80211_IFTYPE_UNSPECIFIED:
- case NL80211_IFTYPE_AP:
- default:
- break;
- }
- if (filterout_non_associated_bssid) {
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (check_bssid) {
+ u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
- switch (rtlphy->current_io_type) {
- case IO_CMD_RESUME_DM_BY_SCAN:
- reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_RCR, (u8 *)(®_rcr));
- /* enable update TSF */
- _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
- break;
- case IO_CMD_PAUSE_DM_BY_SCAN:
- reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_RCR, (u8 *)(®_rcr));
- /* disable update TSF */
- _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
- break;
- }
+ reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ tmp = BIT(4);
} else {
- reg_rcr |= (RCR_CBSSID);
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, 0, (BIT(4)|BIT(5)));
+ reg_rcr |= RCR_CBSSID;
+ tmp = BIT(4) | BIT(5);
}
- } else if (filterout_non_associated_bssid == false) {
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
+ (u8 *) (®_rcr));
+ _rtl92cu_set_bcn_ctrl_reg(hw, 0, tmp);
+ } else {
+ u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
- reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
+ reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ tmp = BIT(4);
} else {
- reg_rcr &= (~RCR_CBSSID);
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4)|BIT(5)), 0);
+ reg_rcr &= ~RCR_CBSSID;
+ tmp = BIT(4) | BIT(5);
}
+ reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_RCR, (u8 *) (®_rcr));
+ _rtl92cu_set_bcn_ctrl_reg(hw, tmp, 0);
}
}
+/*========================================================================== */
+
int rtl92cu_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
if (_rtl92cu_set_media_status(hw, type))
return -EOPNOTSUPP;
- _rtl92cu_set_check_bssid(hw, type);
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92cu_set_check_bssid(hw, true);
+ } else {
+ rtl92cu_set_check_bssid(hw, false);
+ }
+
return 0;
}
(shortgi_rate << 4) | (shortgi_rate);
}
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
- RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
- rtl_read_dword(rtlpriv, REG_ARFR0));
}
void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
}
#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
unsigned bank = at91_gpio->pioc_idx;
+ unsigned mask = 1 << d->hwirq;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
+ if (state)
+ wakeups[bank] |= mask;
+ else
+ wakeups[bank] &= ~mask;
+
irq_set_irq_wake(at91_gpio->pioc_virq, state);
return 0;
}
+
+void at91_pinctrl_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ backups[i] = __raw_readl(pio + PIO_IMR);
+ __raw_writel(backups[i], pio + PIO_IDR);
+ __raw_writel(wakeups[i], pio + PIO_IER);
+
+ if (!wakeups[i]) {
+ clk_unprepare(gpio_chips[i]->clock);
+ clk_disable(gpio_chips[i]->clock);
+ } else {
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n",
+ 'A'+i, wakeups[i]);
+ }
+ }
+}
+
+void at91_pinctrl_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ if (!wakeups[i]) {
+ if (clk_prepare(gpio_chips[i]->clock) == 0)
+ clk_enable(gpio_chips[i]->clock);
+ }
+
+ __raw_writel(wakeups[i], pio + PIO_IDR);
+ __raw_writel(backups[i], pio + PIO_IER);
+ }
+}
+
#else
#define gpio_irq_set_wake NULL
-#endif
+#endif /* CONFIG_PM */
static struct irq_chip gpio_irqchip = {
.name = "GPIO",
.release = scm_release,
};
+static bool scm_permit_request(struct scm_blk_dev *bdev, struct request *req)
+{
+ return rq_data_dir(req) != WRITE || bdev->state != SCM_WR_PROHIBIT;
+}
+
static void scm_request_prepare(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
scm_release_cluster(scmrq);
blk_requeue_request(bdev->rq, scmrq->request);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
scm_ensure_queue_restart(bdev);
}
void scm_request_finish(struct scm_request *scmrq)
{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+
scm_release_cluster(scmrq);
blk_end_request_all(scmrq->request, scmrq->error);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
}
if (req->cmd_type != REQ_TYPE_FS)
continue;
+ if (!scm_permit_request(bdev, req)) {
+ scm_ensure_queue_restart(bdev);
+ return;
+ }
scmrq = scm_request_fetch();
if (!scmrq) {
SCM_LOG(5, "no request");
return;
}
if (scm_need_cluster_request(scmrq)) {
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
scm_initiate_cluster_request(scmrq);
return;
}
scm_request_prepare(scmrq);
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
ret = scm_start_aob(scmrq->aob);
scm_request_requeue(scmrq);
return;
}
- atomic_inc(&bdev->queued_reqs);
}
}
tasklet_hi_schedule(&bdev->tasklet);
}
+static void scm_blk_handle_error(struct scm_request *scmrq)
+{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+ unsigned long flags;
+
+ if (scmrq->error != -EIO)
+ goto restart;
+
+ /* For -EIO the response block is valid. */
+ switch (scmrq->aob->response.eqc) {
+ case EQC_WR_PROHIBIT:
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state != SCM_WR_PROHIBIT)
+ pr_info("%lu: Write access to the SCM increment is suspended\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_WR_PROHIBIT;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+ goto requeue;
+ default:
+ break;
+ }
+
+restart:
+ if (!scm_start_aob(scmrq->aob))
+ return;
+
+requeue:
+ spin_lock_irqsave(&bdev->rq_lock, flags);
+ scm_request_requeue(scmrq);
+ spin_unlock_irqrestore(&bdev->rq_lock, flags);
+}
+
static void scm_blk_tasklet(struct scm_blk_dev *bdev)
{
struct scm_request *scmrq;
spin_unlock_irqrestore(&bdev->lock, flags);
if (scmrq->error && scmrq->retries-- > 0) {
- if (scm_start_aob(scmrq->aob)) {
- spin_lock_irqsave(&bdev->rq_lock, flags);
- scm_request_requeue(scmrq);
- spin_unlock_irqrestore(&bdev->rq_lock, flags);
- }
+ scm_blk_handle_error(scmrq);
+
/* Request restarted or requeued, handle next. */
spin_lock_irqsave(&bdev->lock, flags);
continue;
}
scm_request_finish(scmrq);
- atomic_dec(&bdev->queued_reqs);
spin_lock_irqsave(&bdev->lock, flags);
}
spin_unlock_irqrestore(&bdev->lock, flags);
}
bdev->scmdev = scmdev;
+ bdev->state = SCM_OPER;
spin_lock_init(&bdev->rq_lock);
spin_lock_init(&bdev->lock);
INIT_LIST_HEAD(&bdev->finished_requests);
put_disk(bdev->gendisk);
}
+void scm_blk_set_available(struct scm_blk_dev *bdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state == SCM_WR_PROHIBIT)
+ pr_info("%lu: Write access to the SCM increment is restored\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_OPER;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+}
+
static int __init scm_blk_init(void)
{
int ret = -EINVAL;
spinlock_t rq_lock; /* guard the request queue */
spinlock_t lock; /* guard the rest of the blockdev */
atomic_t queued_reqs;
+ enum {SCM_OPER, SCM_WR_PROHIBIT} state;
struct list_head finished_requests;
#ifdef CONFIG_SCM_BLOCK_CLUSTER_WRITE
struct list_head cluster_list;
int scm_blk_dev_setup(struct scm_blk_dev *, struct scm_device *);
void scm_blk_dev_cleanup(struct scm_blk_dev *);
+void scm_blk_set_available(struct scm_blk_dev *);
void scm_blk_irq(struct scm_device *, void *, int);
void scm_request_finish(struct scm_request *);
#include <asm/eadm.h>
#include "scm_blk.h"
-static void notify(struct scm_device *scmdev)
+static void scm_notify(struct scm_device *scmdev, enum scm_event event)
{
- pr_info("%lu: The capabilities of the SCM increment changed\n",
- (unsigned long) scmdev->address);
- SCM_LOG(2, "State changed");
- SCM_LOG_STATE(2, scmdev);
+ struct scm_blk_dev *bdev = dev_get_drvdata(&scmdev->dev);
+
+ switch (event) {
+ case SCM_CHANGE:
+ pr_info("%lu: The capabilities of the SCM increment changed\n",
+ (unsigned long) scmdev->address);
+ SCM_LOG(2, "State changed");
+ SCM_LOG_STATE(2, scmdev);
+ break;
+ case SCM_AVAIL:
+ SCM_LOG(2, "Increment available");
+ SCM_LOG_STATE(2, scmdev);
+ scm_blk_set_available(bdev);
+ break;
+ }
}
static int scm_probe(struct scm_device *scmdev)
.name = "scm_block",
.owner = THIS_MODULE,
},
- .notify = notify,
+ .notify = scm_notify,
.probe = scm_probe,
.remove = scm_remove,
.handler = scm_blk_irq,
struct read_storage_sccb *sccb;
int i, id, assigned, rc;
+ if (OLDMEM_BASE) /* No standby memory in kdump mode */
+ return 0;
if (!early_read_info_sccb_valid)
return 0;
if ((sclp_facilities & 0xe00000000000ULL) != 0xe00000000000ULL)
" failed (rc=%d).\n", ret);
}
+static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area)
+{
+ int ret;
+
+ CIO_CRW_EVENT(4, "chsc: scm available information\n");
+ if (sei_area->rs != 7)
+ return;
+
+ ret = scm_process_availability_information();
+ if (ret)
+ CIO_CRW_EVENT(0, "chsc: process availability information"
+ " failed (rc=%d).\n", ret);
+}
+
static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area)
{
switch (sei_area->cc) {
case 12: /* scm change notification */
chsc_process_sei_scm_change(sei_area);
break;
+ case 14: /* scm available notification */
+ chsc_process_sei_scm_avail(sei_area);
+ break;
default: /* other stuff */
CIO_CRW_EVENT(2, "chsc: sei nt0 unhandled cc=%d\n",
sei_area->cc);
#ifdef CONFIG_SCM_BUS
int scm_update_information(void);
+int scm_process_availability_information(void);
#else /* CONFIG_SCM_BUS */
static inline int scm_update_information(void) { return 0; }
+static inline int scm_process_availability_information(void) { return 0; }
#endif /* CONFIG_SCM_BUS */
goto out;
scmdrv = to_scm_drv(scmdev->dev.driver);
if (changed && scmdrv->notify)
- scmdrv->notify(scmdev);
+ scmdrv->notify(scmdev, SCM_CHANGE);
out:
device_unlock(&scmdev->dev);
if (changed)
return ret;
}
+static int scm_dev_avail(struct device *dev, void *unused)
+{
+ struct scm_driver *scmdrv = to_scm_drv(dev->driver);
+ struct scm_device *scmdev = to_scm_dev(dev);
+
+ if (dev->driver && scmdrv->notify)
+ scmdrv->notify(scmdev, SCM_AVAIL);
+
+ return 0;
+}
+
+int scm_process_availability_information(void)
+{
+ return bus_for_each_dev(&scm_bus_type, NULL, NULL, scm_dev_avail);
+}
+
static int __init scm_init(void)
{
int ret;
void *reply_param);
int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
+int qeth_get_elements_for_frags(struct sk_buff *);
int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *, int, int, int);
int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
}
EXPORT_SYMBOL_GPL(qeth_get_priority_queue);
+int qeth_get_elements_for_frags(struct sk_buff *skb)
+{
+ int cnt, length, e, elements = 0;
+ struct skb_frag_struct *frag;
+ char *data;
+
+ for (cnt = 0; cnt < skb_shinfo(skb)->nr_frags; cnt++) {
+ frag = &skb_shinfo(skb)->frags[cnt];
+ data = (char *)page_to_phys(skb_frag_page(frag)) +
+ frag->page_offset;
+ length = frag->size;
+ e = PFN_UP((unsigned long)data + length - 1) -
+ PFN_DOWN((unsigned long)data);
+ elements += e;
+ }
+ return elements;
+}
+EXPORT_SYMBOL_GPL(qeth_get_elements_for_frags);
+
int qeth_get_elements_no(struct qeth_card *card, void *hdr,
struct sk_buff *skb, int elems)
{
int elements_needed = PFN_UP((unsigned long)skb->data + dlen - 1) -
PFN_DOWN((unsigned long)skb->data);
- elements_needed += skb_shinfo(skb)->nr_frags;
+ elements_needed += qeth_get_elements_for_frags(skb);
+
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
for (cnt = 0; cnt < skb_shinfo(skb)->nr_frags; cnt++) {
frag = &skb_shinfo(skb)->frags[cnt];
- buffer->element[element].addr = (char *)
- page_to_phys(skb_frag_page(frag))
- + frag->page_offset;
- buffer->element[element].length = frag->size;
- buffer->element[element].eflags = SBAL_EFLAGS_MIDDLE_FRAG;
- element++;
+ data = (char *)page_to_phys(skb_frag_page(frag)) +
+ frag->page_offset;
+ length = frag->size;
+ while (length > 0) {
+ length_here = PAGE_SIZE -
+ ((unsigned long) data % PAGE_SIZE);
+ if (length < length_here)
+ length_here = length;
+
+ buffer->element[element].addr = data;
+ buffer->element[element].length = length_here;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
+ length -= length_here;
+ data += length_here;
+ element++;
+ }
}
if (buffer->element[element - 1].eflags)
return rc;
}
-static void qeth_l3_correct_routing_type(struct qeth_card *card,
+static int qeth_l3_correct_routing_type(struct qeth_card *card,
enum qeth_routing_types *type, enum qeth_prot_versions prot)
{
if (card->info.type == QETH_CARD_TYPE_IQD) {
case PRIMARY_CONNECTOR:
case SECONDARY_CONNECTOR:
case MULTICAST_ROUTER:
- return;
+ return 0;
default:
goto out_inval;
}
case NO_ROUTER:
case PRIMARY_ROUTER:
case SECONDARY_ROUTER:
- return;
+ return 0;
case MULTICAST_ROUTER:
if (qeth_is_ipafunc_supported(card, prot,
IPA_OSA_MC_ROUTER))
- return;
+ return 0;
default:
goto out_inval;
}
}
out_inval:
*type = NO_ROUTER;
+ return -EINVAL;
}
int qeth_l3_setrouting_v4(struct qeth_card *card)
QETH_CARD_TEXT(card, 3, "setrtg4");
- qeth_l3_correct_routing_type(card, &card->options.route4.type,
+ rc = qeth_l3_correct_routing_type(card, &card->options.route4.type,
QETH_PROT_IPV4);
+ if (rc)
+ return rc;
rc = qeth_l3_send_setrouting(card, card->options.route4.type,
QETH_PROT_IPV4);
if (!qeth_is_supported(card, IPA_IPV6))
return 0;
- qeth_l3_correct_routing_type(card, &card->options.route6.type,
+ rc = qeth_l3_correct_routing_type(card, &card->options.route6.type,
QETH_PROT_IPV6);
+ if (rc)
+ return rc;
rc = qeth_l3_send_setrouting(card, card->options.route6.type,
QETH_PROT_IPV6);
tcp_hdr(skb)->doff * 4;
int tcpd_len = skb->len - (tcpd - (unsigned long)skb->data);
int elements = PFN_UP(tcpd + tcpd_len - 1) - PFN_DOWN(tcpd);
- elements += skb_shinfo(skb)->nr_frags;
+
+ elements += qeth_get_elements_for_frags(skb);
+
return elements;
}
rc = -ENODEV;
goto out_remove;
}
- qeth_trace_features(card);
if (!card->dev && qeth_l3_setup_netdev(card)) {
rc = -ENODEV;
qeth_l3_set_multicast_list(card->dev);
rtnl_unlock();
}
+ qeth_trace_features(card);
/* let user_space know that device is online */
kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
mutex_unlock(&card->conf_mutex);
rc = qeth_l3_setrouting_v6(card);
}
out:
+ if (rc)
+ route->type = old_route_type;
mutex_unlock(&card->conf_mutex);
return rc ? rc : count;
}
msg.msg_controllen = 0;
ubufs = NULL;
} else {
- struct ubuf_info *ubuf = &vq->ubuf_info[head];
+ struct ubuf_info *ubuf;
+ ubuf = vq->ubuf_info + vq->upend_idx;
vq->heads[vq->upend_idx].len =
VHOST_DMA_IN_PROGRESS;
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
}
sinfo->info = info;
sinfo->pdev = pdev;
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+ cpu_is_at91sam9rl()) {
+ sinfo->have_intensity_bit = true;
+ }
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
union {
__u32 mark;
__u32 dropcount;
- __u32 avail_size;
+ __u32 reserved_tailroom;
};
sk_buff_data_t inner_transport_header;
* do not lose pfmemalloc information as the pages would not be
* allocated using __GFP_MEMALLOC.
*/
- if (page->pfmemalloc && !page->mapping)
- skb->pfmemalloc = true;
frag->page.p = page;
frag->page_offset = off;
skb_frag_size_set(frag, size);
+
+ page = compound_head(page);
+ if (page->pfmemalloc && !page->mapping)
+ skb->pfmemalloc = true;
}
/**
*/
static inline int skb_availroom(const struct sk_buff *skb)
{
- return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
+ if (skb_is_nonlinear(skb))
+ return 0;
+
+ return skb->end - skb->tail - skb->reserved_tailroom;
}
/**
u16 connected;
};
+extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf);
extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign);
static inline struct neighbour *dst_neigh_lookup(const struct dst_entry *dst, const void *daddr)
{
- return dst->ops->neigh_lookup(dst, NULL, daddr);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, NULL, daddr);
+ return IS_ERR(n) ? NULL : n;
}
static inline struct neighbour *dst_neigh_lookup_skb(const struct dst_entry *dst,
struct sk_buff *skb)
{
- return dst->ops->neigh_lookup(dst, skb, NULL);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, skb, NULL);
+ return IS_ERR(n) ? NULL : n;
}
static inline void dst_link_failure(struct sk_buff *skb)
#define INETFRAGS_HASHSZ 64
+/* averaged:
+ * max_depth = default ipfrag_high_thresh / INETFRAGS_HASHSZ /
+ * rounded up (SKB_TRUELEN(0) + sizeof(struct ipq or
+ * struct frag_queue))
+ */
+#define INETFRAGS_MAXDEPTH 128
+
struct inet_frags {
struct hlist_head hash[INETFRAGS_HASHSZ];
/* This rwlock is a global lock (seperate per IPv4, IPv6 and
struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
struct inet_frags *f, void *key, unsigned int hash)
__releases(&f->lock);
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix);
static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
{
};
#ifdef CONFIG_IP_ROUTE_MULTIPATH
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel])
-
-#define FIB_TABLE_HASHSZ 2
-
#else /* CONFIG_IP_ROUTE_MULTIPATH */
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[0])
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#ifdef CONFIG_IP_MULTIPLE_TABLES
#define FIB_TABLE_HASHSZ 256
-
-#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#else
+#define FIB_TABLE_HASHSZ 2
+#endif
extern __be32 fib_info_update_nh_saddr(struct net *net, struct fib_nh *nh);
*/
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
-#define ATMEL_LCDC_WIRING_RGB555 2
/* LCD Controller info data structure, stored in device platform_data */
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+ bool have_intensity_bit;
};
#define ATMEL_LCDC_DMABADDR1 0x00
spin_unlock_irq(&pool->lock);
mutex_unlock(&pool->assoc_mutex);
- }
- /*
- * Call schedule() so that we cross rq->lock and thus can guarantee
- * sched callbacks see the %WORKER_UNBOUND flag. This is necessary
- * as scheduler callbacks may be invoked from other cpus.
- */
- schedule();
+ /*
+ * Call schedule() so that we cross rq->lock and thus can
+ * guarantee sched callbacks see the %WORKER_UNBOUND flag.
+ * This is necessary as scheduler callbacks may be invoked
+ * from other cpus.
+ */
+ schedule();
- /*
- * Sched callbacks are disabled now. Zap nr_running. After this,
- * nr_running stays zero and need_more_worker() and keep_working()
- * are always true as long as the worklist is not empty. Pools on
- * @cpu now behave as unbound (in terms of concurrency management)
- * pools which are served by workers tied to the CPU.
- *
- * On return from this function, the current worker would trigger
- * unbound chain execution of pending work items if other workers
- * didn't already.
- */
- for_each_std_worker_pool(pool, cpu)
+ /*
+ * Sched callbacks are disabled now. Zap nr_running.
+ * After this, nr_running stays zero and need_more_worker()
+ * and keep_working() are always true as long as the
+ * worklist is not empty. This pool now behaves as an
+ * unbound (in terms of concurrency management) pool which
+ * are served by workers tied to the pool.
+ */
atomic_set(&pool->nr_running, 0);
+
+ /*
+ * With concurrency management just turned off, a busy
+ * worker blocking could lead to lengthy stalls. Kick off
+ * unbound chain execution of currently pending work items.
+ */
+ spin_lock_irq(&pool->lock);
+ wake_up_worker(pool);
+ spin_unlock_irq(&pool->lock);
+ }
}
/*
batadv_ogm_packet = (struct batadv_ogm_packet *)packet_buff;
/* unpack the aggregated packets and process them one by one */
- do {
+ while (batadv_iv_ogm_aggr_packet(buff_pos, packet_len,
+ batadv_ogm_packet->tt_num_changes)) {
tt_buff = packet_buff + buff_pos + BATADV_OGM_HLEN;
batadv_iv_ogm_process(ethhdr, batadv_ogm_packet, tt_buff,
packet_pos = packet_buff + buff_pos;
batadv_ogm_packet = (struct batadv_ogm_packet *)packet_pos;
- } while (batadv_iv_ogm_aggr_packet(buff_pos, packet_len,
- batadv_ogm_packet->tt_num_changes));
+ }
kfree_skb(skb);
return NET_RX_SUCCESS;
+ nla_total_size(1) /* IFLA_BRPORT_MODE */
+ nla_total_size(1) /* IFLA_BRPORT_GUARD */
+ nla_total_size(1) /* IFLA_BRPORT_PROTECT */
+ + nla_total_size(1) /* IFLA_BRPORT_FAST_LEAVE */
+ 0;
}
br_set_port_flag(p, tb, IFLA_BRPORT_MODE, BR_HAIRPIN_MODE);
br_set_port_flag(p, tb, IFLA_BRPORT_GUARD, BR_BPDU_GUARD);
br_set_port_flag(p, tb, IFLA_BRPORT_FAST_LEAVE, BR_MULTICAST_FAST_LEAVE);
+ br_set_port_flag(p, tb, IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK);
if (tb[IFLA_BRPORT_COST]) {
err = br_stp_set_path_cost(p, nla_get_u32(tb[IFLA_BRPORT_COST]));
struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
struct packet_offload *ptype;
__be16 type = skb->protocol;
+ int vlan_depth = ETH_HLEN;
while (type == htons(ETH_P_8021Q)) {
- int vlan_depth = ETH_HLEN;
struct vlan_hdr *vh;
if (unlikely(!pskb_may_pull(skb, vlan_depth + VLAN_HLEN)))
struct rtattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
while (RTA_OK(attr, attrlen)) {
- unsigned int flavor = attr->rta_type;
+ unsigned int flavor = attr->rta_type & NLA_TYPE_MASK;
if (flavor) {
if (flavor > rta_max[sz_idx])
return -EINVAL;
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <net/sock.h>
#include <net/inet_frag.h>
static void inet_frag_secret_rebuild(unsigned long dummy)
__releases(&f->lock)
{
struct inet_frag_queue *q;
+ int depth = 0;
hlist_for_each_entry(q, &f->hash[hash], list) {
if (q->net == nf && f->match(q, key)) {
read_unlock(&f->lock);
return q;
}
+ depth++;
}
read_unlock(&f->lock);
- return inet_frag_create(nf, f, key);
+ if (depth <= INETFRAGS_MAXDEPTH)
+ return inet_frag_create(nf, f, key);
+ else
+ return ERR_PTR(-ENOBUFS);
}
EXPORT_SYMBOL(inet_frag_find);
+
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix)
+{
+ static const char msg[] = "inet_frag_find: Fragment hash bucket"
+ " list length grew over limit " __stringify(INETFRAGS_MAXDEPTH)
+ ". Dropping fragment.\n";
+
+ if (PTR_ERR(q) == -ENOBUFS)
+ LIMIT_NETDEBUG(KERN_WARNING "%s%s", prefix, msg);
+}
+EXPORT_SYMBOL(inet_frag_maybe_warn_overflow);
hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol);
q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash);
- if (q == NULL)
- goto out_nomem;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct ipq, q);
-
-out_nomem:
- LIMIT_NETDEBUG(KERN_ERR pr_fmt("ip_frag_create: no memory left !\n"));
- return NULL;
}
/* Is the fragment too far ahead to be part of ipq? */
if (dev->header_ops && dev->type == ARPHRD_IPGRE) {
gre_hlen = 0;
- if (skb->protocol == htons(ETH_P_IP))
- tiph = (const struct iphdr *)skb->data;
- else
- tiph = &tunnel->parms.iph;
+ tiph = (const struct iphdr *)skb->data;
} else {
gre_hlen = tunnel->hlen;
tiph = &tunnel->parms.iph;
}
switch (optptr[3]&0xF) {
case IPOPT_TS_TSONLY:
- opt->ts = optptr - iph;
if (skb)
timeptr = &optptr[optptr[2]-1];
opt->ts_needtime = 1;
pp_ptr = optptr + 2;
goto error;
}
- opt->ts = optptr - iph;
if (rt) {
spec_dst_fill(&spec_dst, skb);
memcpy(&optptr[optptr[2]-1], &spec_dst, 4);
pp_ptr = optptr + 2;
goto error;
}
- opt->ts = optptr - iph;
{
__be32 addr;
memcpy(&addr, &optptr[optptr[2]-1], 4);
pp_ptr = optptr + 3;
goto error;
}
- opt->ts = optptr - iph;
if (skb) {
optptr[3] = (optptr[3]&0xF)|((overflow+1)<<4);
opt->is_changed = 1;
}
}
+ opt->ts = optptr - iph;
break;
case IPOPT_RA:
if (optlen < 4) {
* Make sure that we have exactly size bytes
* available to the caller, no more, no less.
*/
- skb->avail_size = size;
+ skb->reserved_tailroom = skb->end - skb->tail - size;
return skb;
}
__kfree_skb(skb);
struct inet_sock *inet = inet_sk(sk);
u32 mtu = tcp_sk(sk)->mtu_info;
- /* We are not interested in TCP_LISTEN and open_requests (SYN-ACKs
- * send out by Linux are always <576bytes so they should go through
- * unfragmented).
- */
- if (sk->sk_state == TCP_LISTEN)
- return;
-
dst = inet_csk_update_pmtu(sk, mtu);
if (!dst)
return;
goto out;
if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */
+ /* We are not interested in TCP_LISTEN and open_requests
+ * (SYN-ACKs send out by Linux are always <576bytes so
+ * they should go through unfragmented).
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ goto out;
+
tp->mtu_info = info;
if (!sock_owned_by_user(sk)) {
tcp_v4_mtu_reduced(sk);
eat = min_t(int, len, skb_headlen(skb));
if (eat) {
__skb_pull(skb, eat);
- skb->avail_size -= eat;
len -= eat;
if (!len)
return;
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "IPv6-nf: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
q = inet_frag_find(&net->nf_frag.frags, &nf_frags, &arg, hash);
local_bh_enable();
- if (q == NULL)
- goto oom;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct frag_queue, q);
-
-oom:
- return NULL;
}
* YOSHIFUJI,H. @USAGI Always remove fragment header to
* calculate ICV correctly.
*/
+
+#define pr_fmt(fmt) "IPv6: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
hash = inet6_hash_frag(id, src, dst, ip6_frags.rnd);
q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash);
- if (q == NULL)
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
return NULL;
-
+ }
return container_of(q, struct frag_queue, q);
}
}
if (type == ICMPV6_PKT_TOOBIG) {
+ /* We are not interested in TCP_LISTEN and open_requests
+ * (SYN-ACKs send out by Linux are always <576bytes so
+ * they should go through unfragmented).
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ goto out;
+
tp->mtu_info = ntohl(info);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
}
}
-static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen)
+static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen,
+ int err)
{
struct sock *sk;
struct hlist_node *tmp;
nfc_llcp_accept_unlink(accept_sk);
+ if (err)
+ accept_sk->sk_err = err;
accept_sk->sk_state = LLCP_CLOSED;
+ accept_sk->sk_state_change(sk);
bh_unlock_sock(accept_sk);
continue;
}
+ if (err)
+ sk->sk_err = err;
sk->sk_state = LLCP_CLOSED;
+ sk->sk_state_change(sk);
bh_unlock_sock(sk);
}
write_unlock(&local->sockets.lock);
+
+ /*
+ * If we want to keep the listening sockets alive,
+ * we don't touch the RAW ones.
+ */
+ if (listen == true)
+ return;
+
+ write_lock(&local->raw_sockets.lock);
+
+ sk_for_each_safe(sk, tmp, &local->raw_sockets.head) {
+ llcp_sock = nfc_llcp_sock(sk);
+
+ bh_lock_sock(sk);
+
+ nfc_llcp_socket_purge(llcp_sock);
+
+ if (err)
+ sk->sk_err = err;
+ sk->sk_state = LLCP_CLOSED;
+ sk->sk_state_change(sk);
+
+ bh_unlock_sock(sk);
+
+ sock_orphan(sk);
+
+ sk_del_node_init(sk);
+ }
+
+ write_unlock(&local->raw_sockets.lock);
}
struct nfc_llcp_local *nfc_llcp_local_get(struct nfc_llcp_local *local)
return local;
}
-static void local_release(struct kref *ref)
+static void local_cleanup(struct nfc_llcp_local *local, bool listen)
{
- struct nfc_llcp_local *local;
-
- local = container_of(ref, struct nfc_llcp_local, ref);
-
- list_del(&local->list);
- nfc_llcp_socket_release(local, false);
+ nfc_llcp_socket_release(local, listen, ENXIO);
del_timer_sync(&local->link_timer);
skb_queue_purge(&local->tx_queue);
cancel_work_sync(&local->tx_work);
cancel_work_sync(&local->rx_work);
cancel_work_sync(&local->timeout_work);
kfree_skb(local->rx_pending);
+}
+
+static void local_release(struct kref *ref)
+{
+ struct nfc_llcp_local *local;
+
+ local = container_of(ref, struct nfc_llcp_local, ref);
+
+ list_del(&local->list);
+ local_cleanup(local, false);
kfree(local);
}
return;
/* Close and purge all existing sockets */
- nfc_llcp_socket_release(local, true);
+ nfc_llcp_socket_release(local, true, 0);
}
void nfc_llcp_mac_is_up(struct nfc_dev *dev, u32 target_idx,
return;
}
+ local_cleanup(local, false);
+
nfc_llcp_local_put(local);
}
pr_debug("Returning sk state %d\n", sk->sk_state);
+ sk_acceptq_removed(parent);
+
return sk;
}
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_sub(skb->csum, csum_partial(skb->data
- + ETH_HLEN, VLAN_HLEN, 0));
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
*current_tci = vhdr->h_vlan_TCI;
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_add(skb->csum, csum_partial(skb->data
- + ETH_HLEN, VLAN_HLEN, 0));
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
}
__vlan_hwaccel_put_tag(skb, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
skb_copy_and_csum_dev(skb, nla_data(nla));
+ genlmsg_end(user_skb, upcall);
err = genlmsg_unicast(net, user_skb, upcall_info->portid);
out:
if (IS_ERR(vport))
goto exit_unlock;
+ err = 0;
reply = ovs_vport_cmd_build_info(vport, info->snd_portid, info->snd_seq,
OVS_VPORT_CMD_NEW);
if (IS_ERR(reply)) {
if (IS_ERR(reply))
goto exit_unlock;
+ err = 0;
ovs_dp_detach_port(vport);
genl_notify(reply, genl_info_net(info), info->snd_portid,
return htons(ETH_P_802_2);
__skb_pull(skb, sizeof(struct llc_snap_hdr));
- return llc->ethertype;
+
+ if (ntohs(llc->ethertype) >= 1536)
+ return llc->ethertype;
+
+ return htons(ETH_P_802_2);
}
static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key,
/* Make our own copy of the packet. Otherwise we will mangle the
* packet for anyone who came before us (e.g. tcpdump via AF_PACKET).
- * (No one comes after us, since we tell handle_bridge() that we took
- * the packet.) */
+ */
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return;
* @skb: skb that was received
*
* Must be called with rcu_read_lock. The packet cannot be shared and
- * skb->data should point to the Ethernet header. The caller must have already
- * called compute_ip_summed() to initialize the checksumming fields.
+ * skb->data should point to the Ethernet header.
*/
void ovs_vport_receive(struct vport *vport, struct sk_buff *skb)
{
transports) {
if (transport == active)
- break;
+ continue;
list_for_each_entry(chunk, &transport->transmitted,
transmitted_list) {
if (key == chunk->subh.data_hdr->tsn) {
}
/* Delete the tempory new association. */
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
/* Restore association pointer to provide SCTP command interpeter
if (old_ctx) {
new_ctx = kmalloc(sizeof(*old_ctx) + old_ctx->ctx_len,
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!new_ctx)
return -ENOMEM;
OSDN Git Service
