ECC codes. They are used with NAND devices requiring more than 1 bit
of error correction.
-config MTD_SM_COMMON
- tristate
- default n
+comment "Raw/parallel NAND flash controllers"
config MTD_NAND_DENALI
tristate
config MTD_NAND_DENALI_PCI
- tristate "Support Denali NAND controller on Intel Moorestown"
+ tristate "Denali NAND controller on Intel Moorestown"
select MTD_NAND_DENALI
depends on PCI
help
Denali NAND controller core.
config MTD_NAND_DENALI_DT
- tristate "Support Denali NAND controller as a DT device"
+ tristate "Denali NAND controller as a DT device"
select MTD_NAND_DENALI
depends on HAS_DMA && HAVE_CLK && OF
help
Enable the driver for NAND flash on platforms using a Denali NAND
controller as a DT device.
-config MTD_NAND_GPIO
- tristate "GPIO assisted NAND Flash driver"
- depends on GPIOLIB || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This enables a NAND flash driver where control signals are
- connected to GPIO pins, and commands and data are communicated
- via a memory mapped interface.
-
config MTD_NAND_AMS_DELTA
- tristate "NAND Flash device on Amstrad E3"
+ tristate "Amstrad E3 NAND controller"
depends on MACH_AMS_DELTA || COMPILE_TEST
default y
help
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_OMAP2
- tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
+ tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
depends on HAS_IOMEM
help
config MTD_NAND_OMAP_BCH_BUILD
def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
-config MTD_NAND_RICOH
- tristate "Ricoh xD card reader"
- default n
- depends on PCI
- select MTD_SM_COMMON
- help
- Enable support for Ricoh R5C852 xD card reader
- You also need to enable ether
- NAND SSFDC (SmartMedia) read only translation layer' or new
- expermental, readwrite
- 'SmartMedia/xD new translation layer'
-
config MTD_NAND_AU1550
tristate "Au1550/1200 NAND support"
depends on MIPS_ALCHEMY
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
+config MTD_NAND_NDFC
+ tristate "IBM/MCC 4xx NAND controller"
+ depends on 4xx
+ select MTD_NAND_ECC_SW_HAMMING_SMC
+ help
+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
config MTD_NAND_S3C2410
- tristate "NAND Flash support for Samsung S3C SoCs"
+ tristate "Samsung S3C NAND controller"
depends on ARCH_S3C24XX || ARCH_S3C64XX
help
This enables the NAND flash controller on the S3C24xx and S3C64xx
must advertise a platform_device for the driver to attach.
config MTD_NAND_S3C2410_DEBUG
- bool "Samsung S3C NAND driver debug"
+ bool "Samsung S3C NAND controller debug"
depends on MTD_NAND_S3C2410
help
Enable debugging of the S3C NAND driver
-config MTD_NAND_NDFC
- tristate "NDFC NanD Flash Controller"
- depends on 4xx
- select MTD_NAND_ECC_SW_HAMMING_SMC
- help
- NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
config MTD_NAND_S3C2410_CLKSTOP
bool "Samsung S3C NAND IDLE clock stop"
depends on MTD_NAND_S3C2410
approximately 5mA of power when there is nothing happening.
config MTD_NAND_TANGO
- tristate "NAND Flash support for Tango chips"
+ tristate "Tango NAND controller"
depends on ARCH_TANGO || COMPILE_TEST
depends on HAS_IOMEM
help
Enables the NAND Flash controller on Tango chips.
-config MTD_NAND_DISKONCHIP
- tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
- depends on HAS_IOMEM
- select REED_SOLOMON
- select REED_SOLOMON_DEC16
- help
- This is a reimplementation of M-Systems DiskOnChip 2000,
- Millennium and Millennium Plus as a standard NAND device driver,
- as opposed to the earlier self-contained MTD device drivers.
- This should enable, among other things, proper JFFS2 operation on
- these devices.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
- bool "Advanced detection options for DiskOnChip"
- depends on MTD_NAND_DISKONCHIP
- help
- This option allows you to specify nonstandard address at which to
- probe for a DiskOnChip, or to change the detection options. You
- are unlikely to need any of this unless you are using LinuxBIOS.
- Say 'N'.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
- hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
- depends on MTD_NAND_DISKONCHIP
- default "0"
- help
- By default, the probe for DiskOnChip devices will look for a
- DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
- This option allows you to specify a single address at which to probe
- for the device, which is useful if you have other devices in that
- range which get upset when they are probed.
-
- (Note that on PowerPC, the normal probe will only check at
- 0xE4000000.)
-
- Normally, you should leave this set to zero, to allow the probe at
- the normal addresses.
-
-config MTD_NAND_DISKONCHIP_PROBE_HIGH
- bool "Probe high addresses"
- depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
- help
- By default, the probe for DiskOnChip devices will look for a
- DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
- This option changes to make it probe between 0xFFFC8000 and
- 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
- useful to you. Say 'N'.
-
-config MTD_NAND_DISKONCHIP_BBTWRITE
- bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
- depends on MTD_NAND_DISKONCHIP
- help
- On DiskOnChip devices shipped with the INFTL filesystem (Millennium
- and 2000 TSOP/Alon), Linux reserves some space at the end of the
- device for the Bad Block Table (BBT). If you have existing INFTL
- data on your device (created by non-Linux tools such as M-Systems'
- DOS drivers), your data might overlap the area Linux wants to use for
- the BBT. If this is a concern for you, leave this option disabled and
- Linux will not write BBT data into this area.
- The downside of leaving this option disabled is that if bad blocks
- are detected by Linux, they will not be recorded in the BBT, which
- could cause future problems.
- Once you enable this option, new filesystems (INFTL or others, created
- in Linux or other operating systems) will not use the reserved area.
- The only reason not to enable this option is to prevent damage to
- preexisting filesystems.
- Even if you leave this disabled, you can enable BBT writes at module
- load time (assuming you build diskonchip as a module) with the module
- parameter "inftl_bbt_write=1".
-
config MTD_NAND_SHARPSL
- tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+ tristate "Sharp SL Series (C7xx + others) NAND controller"
depends on ARCH_PXA || COMPILE_TEST
depends on HAS_IOMEM
config MTD_NAND_CAFE
- tristate "NAND support for OLPC CAFÉ chip"
+ tristate "OLPC CAFÉ NAND controller"
depends on PCI
select REED_SOLOMON
select REED_SOLOMON_DEC16
laptop.
config MTD_NAND_CS553X
- tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+ tristate "CS5535/CS5536 (AMD Geode companion) NAND controller"
depends on X86_32
depends on !UML && HAS_IOMEM
help
If you say "m", the module will be called cs553x_nand.
config MTD_NAND_ATMEL
- tristate "Support for NAND Flash / SmartMedia on AT91"
+ tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller"
depends on ARCH_AT91 || COMPILE_TEST
depends on HAS_IOMEM
select GENERIC_ALLOCATOR
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 processors.
+config MTD_NAND_ORION
+ tristate "Marvell Orion NAND controller"
+ depends on PLAT_ORION
+ help
+ This enables the NAND flash controller on Orion machines.
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
config MTD_NAND_MARVELL
- tristate "NAND controller support on Marvell boards"
+ tristate "Marvell EBU NAND controller"
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
COMPILE_TEST
depends on HAS_IOMEM
- 64-bit Aramda platforms (7k, 8k) (NFCv2)
config MTD_NAND_SLC_LPC32XX
- tristate "NXP LPC32xx SLC Controller"
+ tristate "NXP LPC32xx SLC NAND controller"
depends on ARCH_LPC32XX || COMPILE_TEST
depends on HAS_IOMEM
help
by the SLC NAND controller.
config MTD_NAND_MLC_LPC32XX
- tristate "NXP LPC32xx MLC Controller"
+ tristate "NXP LPC32xx MLC NAND controller"
depends on ARCH_LPC32XX || COMPILE_TEST
depends on HAS_IOMEM
help
by the MLC NAND controller.
config MTD_NAND_CM_X270
- tristate "Support for NAND Flash on CM-X270 modules"
+ tristate "CM-X270 modules NAND controller"
depends on MACH_ARMCORE
config MTD_NAND_PASEMI
- tristate "NAND support for PA Semi PWRficient"
+ tristate "PA Semi PWRficient NAND controller"
depends on PPC_PASEMI
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
config MTD_NAND_TMIO
- tristate "NAND Flash device on Toshiba Mobile IO Controller"
+ tristate "Toshiba Mobile IO NAND controller"
depends on MFD_TMIO
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
-config MTD_NAND_NANDSIM
- tristate "Support for NAND Flash Simulator"
- help
- The simulator may simulate various NAND flash chips for the
- MTD nand layer.
-
-config MTD_NAND_GPMI_NAND
- tristate "GPMI NAND Flash Controller driver"
- depends on MXS_DMA
- help
- Enables NAND Flash support for IMX23, IMX28 or IMX6.
- The GPMI controller is very powerful, with the help of BCH
- module, it can do the hardware ECC. The GPMI supports several
- NAND flashs at the same time.
-
config MTD_NAND_BRCMNAND
tristate "Broadcom STB NAND controller"
depends on ARM || ARM64 || MIPS || COMPILE_TEST
BCM3xxx, BCM63xxx, iProc/Cygnus and more.
config MTD_NAND_BCM47XXNFLASH
- tristate "Support for NAND flash on BCM4706 BCMA bus"
+ tristate "BCM4706 BCMA NAND controller"
depends on BCMA_NFLASH
depends on BCMA
help
registered by bcma as platform devices. This enables driver for
NAND flash memories. For now only BCM4706 is supported.
-config MTD_NAND_PLATFORM
- tristate "Support for generic platform NAND driver"
+config MTD_NAND_OXNAS
+ tristate "Oxford Semiconductor NAND controller"
+ depends on ARCH_OXNAS || COMPILE_TEST
depends on HAS_IOMEM
help
- This implements a generic NAND driver for on-SOC platform
- devices. You will need to provide platform-specific functions
- via platform_data.
+ This enables the NAND flash controller on Oxford Semiconductor SoCs.
-config MTD_NAND_ORION
- tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION
+config MTD_NAND_MPC5121_NFC
+ tristate "MPC5121 NAND controller"
+ depends on PPC_MPC512x
help
- This enables the NAND flash controller on Orion machines.
-
- No board specific support is done by this driver, each board
- must advertise a platform_device for the driver to attach.
+ This enables the driver for the NAND flash controller on the
+ MPC5121 SoC.
-config MTD_NAND_OXNAS
- tristate "NAND Flash support for Oxford Semiconductor SoC"
- depends on ARCH_OXNAS || COMPILE_TEST
- depends on HAS_IOMEM
+config MTD_NAND_GPMI_NAND
+ tristate "Freescale GPMI NAND controller"
+ depends on MXS_DMA
help
- This enables the NAND flash controller on Oxford Semiconductor SoCs.
+ Enables NAND Flash support for IMX23, IMX28 or IMX6.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
config MTD_NAND_FSL_ELBC
- tristate "NAND support for Freescale eLBC controllers"
+ tristate "Freescale eLBC NAND controller"
depends on FSL_SOC
select FSL_LBC
help
external NAND devices.
config MTD_NAND_FSL_IFC
- tristate "NAND support for Freescale IFC controller"
+ tristate "Freescale IFC NAND controller"
depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
depends on HAS_IOMEM
select FSL_IFC
external NAND devices.
config MTD_NAND_FSL_UPM
- tristate "Support for NAND on Freescale UPM"
+ tristate "Freescale UPM NAND controller"
depends on PPC_83xx || PPC_85xx
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
-config MTD_NAND_MPC5121_NFC
- tristate "MPC5121 built-in NAND Flash Controller support"
- depends on PPC_MPC512x
- help
- This enables the driver for the NAND flash controller on the
- MPC5121 SoC.
-
config MTD_NAND_VF610_NFC
- tristate "Support for Freescale NFC for VF610/MPC5125"
+ tristate "Freescale VF610/MPC5125 NAND controller"
depends on (SOC_VF610 || COMPILE_TEST)
depends on HAS_IOMEM
help
device tree.
config MTD_NAND_MXC
- tristate "MXC NAND support"
+ tristate "Freescale MXC NAND controller"
depends on ARCH_MXC || COMPILE_TEST
depends on HAS_IOMEM
help
MXC processors.
config MTD_NAND_SH_FLCTL
- tristate "Support for NAND on Renesas SuperH FLCTL"
+ tristate "Renesas SuperH FLCTL NAND controller"
depends on SUPERH || COMPILE_TEST
depends on HAS_IOMEM
help
for NAND Flash using FLCTL.
config MTD_NAND_DAVINCI
- tristate "Support NAND on DaVinci/Keystone SoC"
+ tristate "DaVinci/Keystone NAND controller"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
depends on HAS_IOMEM
help
DaVinci/Keystone processors.
config MTD_NAND_TXX9NDFMC
- tristate "NAND Flash support for TXx9 SoC"
+ tristate "TXx9 NAND controller"
depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST
depends on HAS_IOMEM
help
This enables the NAND flash controller on the TXx9 SoCs.
config MTD_NAND_SOCRATES
- tristate "Support for NAND on Socrates board"
+ tristate "Socrates NAND controller"
depends on SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
config MTD_NAND_NUC900
- tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
+ tristate "Nuvoton NUC9xx/w90p910 NAND controller"
depends on ARCH_W90X900 || COMPILE_TEST
depends on HAS_IOMEM
help
source "drivers/mtd/nand/raw/ingenic/Kconfig"
config MTD_NAND_FSMC
- tristate "Support for NAND on ST Micros FSMC"
+ tristate "ST Micros FSMC NAND controller"
depends on OF && HAS_IOMEM
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \
COMPILE_TEST
Flexible Static Memory Controller (FSMC)
config MTD_NAND_XWAY
- bool "Support for NAND on Lantiq XWAY SoC"
+ bool "Lantiq XWAY NAND controller"
depends on LANTIQ && SOC_TYPE_XWAY
help
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
to the External Bus Unit (EBU).
config MTD_NAND_SUNXI
- tristate "Support for NAND on Allwinner SoCs"
+ tristate "Allwinner NAND controller"
depends on ARCH_SUNXI || COMPILE_TEST
depends on HAS_IOMEM
help
Enables support for NAND Flash chips on Allwinner SoCs.
config MTD_NAND_HISI504
- tristate "Support for NAND controller on Hisilicon SoC Hip04"
+ tristate "Hisilicon Hip04 NAND controller"
depends on ARCH_HISI || COMPILE_TEST
depends on HAS_IOMEM
help
Enables support for NAND controller on Hisilicon SoC Hip04.
config MTD_NAND_QCOM
- tristate "Support for NAND on QCOM SoCs"
+ tristate "QCOM NAND controller"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
help
controller. This controller is found on IPQ806x SoC.
config MTD_NAND_MTK
- tristate "Support for NAND controller on MTK SoCs"
+ tristate "MTK NAND controller"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_IOMEM
help
This controller is found on mt27xx, mt81xx, mt65xx SoCs.
config MTD_NAND_TEGRA
- tristate "Support for NAND controller on NVIDIA Tegra"
+ tristate "NVIDIA Tegra NAND controller"
depends on ARCH_TEGRA || COMPILE_TEST
depends on HAS_IOMEM
help
Enables support for NAND controller on Amlogic's Meson SoCs.
This controller is found on Meson SoCs.
+config MTD_NAND_GPIO
+ tristate "GPIO assisted NAND controller"
+ depends on GPIOLIB || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables a NAND flash driver where control signals are
+ connected to GPIO pins, and commands and data are communicated
+ via a memory mapped interface.
+
+config MTD_NAND_PLATFORM
+ tristate "Generic NAND controller"
+ depends on HAS_IOMEM
+ help
+ This implements a generic NAND driver for on-SOC platform
+ devices. You will need to provide platform-specific functions
+ via platform_data.
+
+comment "Misc"
+
+config MTD_SM_COMMON
+ tristate
+ default n
+
+config MTD_NAND_NANDSIM
+ tristate "Support for NAND Flash Simulator"
+ help
+ The simulator may simulate various NAND flash chips for the
+ MTD nand layer.
+
+config MTD_NAND_RICOH
+ tristate "Ricoh xD card reader"
+ default n
+ depends on PCI
+ select MTD_SM_COMMON
+ help
+ Enable support for Ricoh R5C852 xD card reader
+ You also need to enable ether
+ NAND SSFDC (SmartMedia) read only translation layer' or new
+ expermental, readwrite
+ 'SmartMedia/xD new translation layer'
+
+config MTD_NAND_DISKONCHIP
+ tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
+ depends on HAS_IOMEM
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+ This is a reimplementation of M-Systems DiskOnChip 2000,
+ Millennium and Millennium Plus as a standard NAND device driver,
+ as opposed to the earlier self-contained MTD device drivers.
+ This should enable, among other things, proper JFFS2 operation on
+ these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ bool "Advanced detection options for DiskOnChip"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ This option allows you to specify nonstandard address at which to
+ probe for a DiskOnChip, or to change the detection options. You
+ are unlikely to need any of this unless you are using LinuxBIOS.
+ Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+ hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ depends on MTD_NAND_DISKONCHIP
+ default "0"
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option allows you to specify a single address at which to probe
+ for the device, which is useful if you have other devices in that
+ range which get upset when they are probed.
+
+ (Note that on PowerPC, the normal probe will only check at
+ 0xE4000000.)
+
+ Normally, you should leave this set to zero, to allow the probe at
+ the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+ bool "Probe high addresses"
+ depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option changes to make it probe between 0xFFFC8000 and
+ 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
+ useful to you. Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+ bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+ and 2000 TSOP/Alon), Linux reserves some space at the end of the
+ device for the Bad Block Table (BBT). If you have existing INFTL
+ data on your device (created by non-Linux tools such as M-Systems'
+ DOS drivers), your data might overlap the area Linux wants to use for
+ the BBT. If this is a concern for you, leave this option disabled and
+ Linux will not write BBT data into this area.
+ The downside of leaving this option disabled is that if bad blocks
+ are detected by Linux, they will not be recorded in the BBT, which
+ could cause future problems.
+ Once you enable this option, new filesystems (INFTL or others, created
+ in Linux or other operating systems) will not use the reserved area.
+ The only reason not to enable this option is to prevent damage to
+ preexisting filesystems.
+ Even if you leave this disabled, you can enable BBT writes at module
+ load time (assuming you build diskonchip as a module) with the module
+ parameter "inftl_bbt_write=1".
+
endif # MTD_NAND
OSDN Git Service
