Create shared {En,Dis}ableSeq.conf components for rt5645 variants

Factor out the common enable and disable sequences used
in rt5645 variants, including the rt5650. Move the sequences
into a new component directory codecs/rt5645/ along with
a Makefile.

Some lines like
    cset "name='Stereo1 ADC1 Mux' 1"
and
    cset "name='I2S2 Func Switch' on"
are not set set in the chtrt5650 UCM sequences and thus are not present
in the new component, in order to maximize reuse.

Signed-off-by: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

diff --git a/configure.ac b/configure.ac
index a0392bf..89235af 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -761,6 +761,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
          src/conf/ucm/codecs/Makefile \
          src/conf/ucm/codecs/nau8824/Makefile \
          src/conf/ucm/codecs/rt5640/Makefile \
+         src/conf/ucm/codecs/rt5645/Makefile \
          src/conf/ucm/codecs/rt5651/Makefile \
          src/conf/ucm/platforms/Makefile \
          src/conf/ucm/platforms/bytcr/Makefile \

diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
index 6184835..46084b3 100644 (file)
--- a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
+++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
@@ -12,53 +12,9 @@ SectionVerb {
                cdev "hw:chtrt5645"
 
                <platforms/bytcr/PlatformEnableSeq.conf>
+               <codecs/rt5645/EnableSeq.conf>
 
-               # Output Configuration
-               cset "name='DAC1 L Mux' IF1 DAC"
-               cset "name='DAC1 R Mux' IF1 DAC"
-               cset "name='DAC1 MIXL DAC1 Switch' 1"
-               cset "name='DAC1 MIXR DAC1 Switch' 1"
-               cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
-               cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
-
-               cset "name='DAC L2 Mux' IF2 DAC"
-               cset "name='DAC R2 Mux' IF2 DAC"
-               cset "name='Mono DAC MIXL DAC L2 Switch' on"
-               cset "name='Mono DAC MIXR DAC R2 Switch' on"
-               cset "name='DAC2 Playback Switch' on"
-
-               cset "name='HPOVOL MIXL DAC1 Switch' on"
-               cset "name='HPOVOL MIXR DAC1 Switch' on"
-               cset "name='HPOVOL MIXL DAC2 Switch' on"
-               cset "name='HPOVOL MIXR DAC2 Switch' on"
-               cset "name='HPO MIX HPVOL Switch' on"
-               cset "name='HPOVOL L Switch' on"
-               cset "name='HPOVOL R Switch' on"
-
-               cset "name='SPK MIXL DAC L1 Switch' on"
-               cset "name='SPK MIXR DAC R1 Switch' on"
-               cset "name='SPK MIXL DAC L2 Switch' on"
-               cset "name='SPK MIXR DAC R2 Switch' on"
-               cset "name='SPOL MIX SPKVOL L Switch' on"
-               cset "name='SPOR MIX SPKVOL R Switch' on"
-               cset "name='SPKVOL L Switch' on"
-               cset "name='SPKVOL R Switch' on"
-
-               # Input Configuration
-               cset "name='Stereo1 DMIC Mux' 0"
                cset "name='Stereo1 ADC1 Mux' 1"
-               cset "name='Stereo1 ADC2 Mux' 1"
-               cset "name='ADC Capture Switch' on"
-               # 55/63
-               cset "name='ADC Capture Volume' 55"
-               # set ADC Boost to 0/3, higher vals cause a lot of white noise
-               cset "name='ADC Boost Capture Volume' 0"
-               # 55/63
-               cset "name='Mono ADC Capture Volume' 55"
-               # 0/3
-               cset "name='Mono ADC Boost Capture Volume' 0"
-               # 27/31
-               cset "name='IN Capture Volume' 27"
                cset "name='I2S2 Func Switch' on"
                # 3/12 the headphone mic tends to be quite loud
                cset "name='IN1 Boost' 3"
@@ -69,21 +25,7 @@ SectionVerb {
        DisableSequence [
                cdev "hw:chtrt5645"
 
-               # Disable audio output path
-               cset "name='codec_out1 mix 0 pcm0_in Switch' off"
-               cset "name='media0_out mix 0 media1_in Switch' off"
-
-               cset "name='media1_in Gain 0 Switch' off"
-               cset "name='pcm0_in Gain 0 Switch' off"
-               cset "name='codec_out1 Gain 0 Switch' off"
-
-               # Disable audio input path
-               cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
-               cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
-
-               cset "name='media_loop2_out Gain 0 Switch' off"
-               cset "name='pcm1_out Gain 0 Switch' off"
-               cset "name='codec_in0 Gain 0 Switch' off"
+               <codecs/rt5645/DisableSeq.conf>
        ]
 }
 

diff --git a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf
index d043f68..4896a2a 100644 (file)
--- a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf
+++ b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf
@@ -12,53 +12,9 @@ SectionVerb {
                cdev "hw:chtrt5645"
 
                <platforms/bytcr/PlatformEnableSeq.conf>
+               <codecs/rt5645/EnableSeq.conf>
 
-               # Output Configuration
-               cset "name='DAC1 L Mux' IF1 DAC"
-               cset "name='DAC1 R Mux' IF1 DAC"
-               cset "name='DAC1 MIXL DAC1 Switch' 1"
-               cset "name='DAC1 MIXR DAC1 Switch' 1"
-               cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
-               cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
-
-               cset "name='DAC L2 Mux' IF2 DAC"
-               cset "name='DAC R2 Mux' IF2 DAC"
-               cset "name='Mono DAC MIXL DAC L2 Switch' on"
-               cset "name='Mono DAC MIXR DAC R2 Switch' on"
-               cset "name='DAC2 Playback Switch' on"
-
-               cset "name='HPOVOL MIXL DAC1 Switch' on"
-               cset "name='HPOVOL MIXR DAC1 Switch' on"
-               cset "name='HPOVOL MIXL DAC2 Switch' on"
-               cset "name='HPOVOL MIXR DAC2 Switch' on"
-               cset "name='HPO MIX HPVOL Switch' on"
-               cset "name='HPOVOL L Switch' on"
-               cset "name='HPOVOL R Switch' on"
-
-               cset "name='SPK MIXL DAC L1 Switch' on"
-               cset "name='SPK MIXR DAC R1 Switch' on"
-               cset "name='SPK MIXL DAC L2 Switch' on"
-               cset "name='SPK MIXR DAC R2 Switch' on"
-               cset "name='SPOL MIX SPKVOL L Switch' on"
-               cset "name='SPOR MIX SPKVOL R Switch' on"
-               cset "name='SPKVOL L Switch' on"
-               cset "name='SPKVOL R Switch' on"
-
-               # Input Configuration
-               cset "name='Stereo1 DMIC Mux' 0"
                cset "name='Stereo1 ADC1 Mux' 1"
-               cset "name='Stereo1 ADC2 Mux' 1"
-               cset "name='ADC Capture Switch' on"
-               # 55/63
-               cset "name='ADC Capture Volume' 55"
-               # set ADC Boost to 0/3, higher vals cause a lot of white noise
-               cset "name='ADC Boost Capture Volume' 0"
-               # 55/63
-               cset "name='Mono ADC Capture Volume' 55"
-               # 0/3
-               cset "name='Mono ADC Boost Capture Volume' 0"
-               # 27/31
-               cset "name='IN Capture Volume' 27"
                cset "name='I2S2 Func Switch' on"
                # 3/12 the headphone mic tends to be quite loud
                cset "name='IN1 Boost' 3"
@@ -69,21 +25,7 @@ SectionVerb {
        DisableSequence [
                cdev "hw:chtrt5645"
 
-               # Disable audio output path
-               cset "name='codec_out1 mix 0 pcm0_in Switch' off"
-               cset "name='media0_out mix 0 media1_in Switch' off"
-
-               cset "name='media1_in Gain 0 Switch' off"
-               cset "name='pcm0_in Gain 0 Switch' off"
-               cset "name='codec_out1 Gain 0 Switch' off"
-
-               # Disable audio input path
-               cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
-               cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
-
-               cset "name='media_loop2_out Gain 0 Switch' off"
-               cset "name='pcm1_out Gain 0 Switch' off"
-               cset "name='codec_in0 Gain 0 Switch' off"
+               <codecs/rt5645/DisableSeq.conf>
        ]
 }
 

diff --git a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf
index c4452a4..d7d8dfb 100644 (file)
--- a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf
+++ b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf
@@ -12,53 +12,9 @@ SectionVerb {
                cdev "hw:chtrt5645"
 
                <platforms/bytcr/PlatformEnableSeq.conf>
+               <codecs/rt5645/EnableSeq.conf>
 
-               # Output Configuration
-               cset "name='DAC1 L Mux' IF1 DAC"
-               cset "name='DAC1 R Mux' IF1 DAC"
-               cset "name='DAC1 MIXL DAC1 Switch' 1"
-               cset "name='DAC1 MIXR DAC1 Switch' 1"
-               cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
-               cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
-
-               cset "name='DAC L2 Mux' IF2 DAC"
-               cset "name='DAC R2 Mux' IF2 DAC"
-               cset "name='Mono DAC MIXL DAC L2 Switch' on"
-               cset "name='Mono DAC MIXR DAC R2 Switch' on"
-               cset "name='DAC2 Playback Switch' on"
-
-               cset "name='HPOVOL MIXL DAC1 Switch' on"
-               cset "name='HPOVOL MIXR DAC1 Switch' on"
-               cset "name='HPOVOL MIXL DAC2 Switch' on"
-               cset "name='HPOVOL MIXR DAC2 Switch' on"
-               cset "name='HPO MIX HPVOL Switch' on"
-               cset "name='HPOVOL L Switch' on"
-               cset "name='HPOVOL R Switch' on"
-
-               cset "name='SPK MIXL DAC L1 Switch' on"
-               cset "name='SPK MIXR DAC R1 Switch' on"
-               cset "name='SPK MIXL DAC L2 Switch' on"
-               cset "name='SPK MIXR DAC R2 Switch' on"
-               cset "name='SPOL MIX SPKVOL L Switch' on"
-               cset "name='SPOR MIX SPKVOL R Switch' on"
-               cset "name='SPKVOL L Switch' on"
-               cset "name='SPKVOL R Switch' on"
-
-               # Input Configuration
-               cset "name='Stereo1 DMIC Mux' 0"
                cset "name='Stereo1 ADC1 Mux' 1"
-               cset "name='Stereo1 ADC2 Mux' 1"
-               cset "name='ADC Capture Switch' on"
-               # 55/63
-               cset "name='ADC Capture Volume' 55"
-               # set ADC Boost to 0/3, higher vals cause a lot of white noise
-               cset "name='ADC Boost Capture Volume' 0"
-               # 55/63
-               cset "name='Mono ADC Capture Volume' 55"
-               # 0/3
-               cset "name='Mono ADC Boost Capture Volume' 0"
-               # 27/31
-               cset "name='IN Capture Volume' 27"
                cset "name='I2S2 Func Switch' on"
                # 3/12 the headphone mic tends to be quite loud
                cset "name='IN1 Boost' 3"
@@ -69,21 +25,7 @@ SectionVerb {
        DisableSequence [
                cdev "hw:chtrt5645"
 
-               # Disable audio output path
-               cset "name='codec_out1 mix 0 pcm0_in Switch' off"
-               cset "name='media0_out mix 0 media1_in Switch' off"
-
-               cset "name='media1_in Gain 0 Switch' off"
-               cset "name='pcm0_in Gain 0 Switch' off"
-               cset "name='codec_out1 Gain 0 Switch' off"
-
-               # Disable audio input path
-               cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
-               cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
-
-               cset "name='media_loop2_out Gain 0 Switch' off"
-               cset "name='pcm1_out Gain 0 Switch' off"
-               cset "name='codec_in0 Gain 0 Switch' off"
+               <codecs/rt5645/DisableSeq.conf>
        ]
 }
 

diff --git a/src/conf/ucm/chtrt5645/HiFi.conf b/src/conf/ucm/chtrt5645/HiFi.conf
index 422f3b7..b803cb2 100644 (file)
--- a/src/conf/ucm/chtrt5645/HiFi.conf
+++ b/src/conf/ucm/chtrt5645/HiFi.conf
@@ -1,4 +1,3 @@
-
 SectionVerb {
        # ALSA PCM
        Value {
@@ -13,53 +12,9 @@ SectionVerb {
                cdev "hw:chtrt5645"
 
                <platforms/bytcr/PlatformEnableSeq.conf>
+               <codecs/rt5645/EnableSeq.conf>
 
-               # Output Configuration
-               cset "name='DAC1 L Mux' IF1 DAC"
-               cset "name='DAC1 R Mux' IF1 DAC"
-               cset "name='DAC1 MIXL DAC1 Switch' 1"
-               cset "name='DAC1 MIXR DAC1 Switch' 1"
-               cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
-               cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
-
-               cset "name='DAC L2 Mux' IF2 DAC"
-               cset "name='DAC R2 Mux' IF2 DAC"
-               cset "name='Mono DAC MIXL DAC L2 Switch' on"
-               cset "name='Mono DAC MIXR DAC R2 Switch' on"
-               cset "name='DAC2 Playback Switch' on"
-
-               cset "name='HPOVOL MIXL DAC1 Switch' on"
-               cset "name='HPOVOL MIXR DAC1 Switch' on"
-               cset "name='HPOVOL MIXL DAC2 Switch' on"
-               cset "name='HPOVOL MIXR DAC2 Switch' on"
-               cset "name='HPO MIX HPVOL Switch' on"
-               cset "name='HPOVOL L Switch' on"
-               cset "name='HPOVOL R Switch' on"
-
-               cset "name='SPK MIXL DAC L1 Switch' on"
-               cset "name='SPK MIXR DAC R1 Switch' on"
-               cset "name='SPK MIXL DAC L2 Switch' on"
-               cset "name='SPK MIXR DAC R2 Switch' on"
-               cset "name='SPOL MIX SPKVOL L Switch' on"
-               cset "name='SPOR MIX SPKVOL R Switch' on"
-               cset "name='SPKVOL L Switch' on"
-               cset "name='SPKVOL R Switch' on"
-
-               # Input Configuration
-               cset "name='Stereo1 DMIC Mux' 0"
                cset "name='Stereo1 ADC1 Mux' 1"
-               cset "name='Stereo1 ADC2 Mux' 1"
-               cset "name='ADC Capture Switch' on"
-               # 55/63
-               cset "name='ADC Capture Volume' 55"
-               # set ADC Boost to 0/3, higher vals cause a lot of white noise
-               cset "name='ADC Boost Capture Volume' 0"
-               # 55/63
-               cset "name='Mono ADC Capture Volume' 55"
-               # 0/3
-               cset "name='Mono ADC Boost Capture Volume' 0"
-               # 27/31
-               cset "name='IN Capture Volume' 27"
                cset "name='I2S2 Func Switch' on"
                # 3/12 the headphone mic tends to be quite loud
                cset "name='IN1 Boost' 3"
@@ -70,21 +25,7 @@ SectionVerb {
        DisableSequence [
                cdev "hw:chtrt5645"
 
-               # Disable audio output path
-               cset "name='codec_out1 mix 0 pcm0_in Switch' off"
-               cset "name='media0_out mix 0 media1_in Switch' off"
-
-               cset "name='media1_in Gain 0 Switch' off"
-               cset "name='pcm0_in Gain 0 Switch' off"
-               cset "name='codec_out1 Gain 0 Switch' off"
-
-               # Disable audio input path
-               cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
-               cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
-
-               cset "name='media_loop2_out Gain 0 Switch' off"
-               cset "name='pcm1_out Gain 0 Switch' off"
-               cset "name='codec_in0 Gain 0 Switch' off"
+               <codecs/rt5645/DisableSeq.conf>
        ]
 }
 

diff --git a/src/conf/ucm/chtrt5650/HiFi.conf b/src/conf/ucm/chtrt5650/HiFi.conf
index cc3d64b..a638da5 100644 (file)
--- a/src/conf/ucm/chtrt5650/HiFi.conf
+++ b/src/conf/ucm/chtrt5650/HiFi.conf
@@ -13,73 +13,19 @@ SectionVerb {
                cdev "hw:chtrt5650"
 
                <platforms/bytcr/PlatformEnableSeq.conf>
+               <codecs/rt5645/EnableSeq.conf>
 
-               # Output Configuration
-               cset "name='DAC1 L Mux' IF1 DAC"
-               cset "name='DAC1 R Mux' IF1 DAC"
-               cset "name='DAC1 MIXL DAC1 Switch' 1"
-               cset "name='DAC1 MIXR DAC1 Switch' 1"
-               cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
-               cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
                cset "name='Speaker HWEQ' 1,164,237,135,1,165,0,0,1,166,237,135,1,167,0,0,1,192,30,196,1,193,0,0,1,194,30,196,1,195,0,0,1,196,31,180,1,197,0,75,1,198,31,180,1,199,31,180,1,200,0,75,1,201,31,180,0,177,51,224"
                cset "name='DAC1 Playback Volume' 77,77"
-
                cset "name='Speaker ClassD Playback Volume' 4"
-
-               cset "name='DAC L2 Mux' IF2 DAC"
-               cset "name='DAC R2 Mux' IF2 DAC"
-               cset "name='Mono DAC MIXL DAC L2 Switch' on"
-               cset "name='Mono DAC MIXR DAC R2 Switch' on"
-               cset "name='DAC2 Playback Switch' on"
-
-               cset "name='HPOVOL MIXL DAC1 Switch' on"
-               cset "name='HPOVOL MIXR DAC1 Switch' on"
-               cset "name='HPOVOL MIXL DAC2 Switch' on"
-               cset "name='HPOVOL MIXR DAC2 Switch' on"
-               cset "name='HPO MIX HPVOL Switch' on"
-               cset "name='HPOVOL L Switch' on"
-               cset "name='HPOVOL R Switch' on"
-
-               cset "name='SPK MIXL DAC L1 Switch' on"
-               cset "name='SPK MIXR DAC R1 Switch' on"
-               cset "name='SPK MIXL DAC L2 Switch' on"
-               cset "name='SPK MIXR DAC R2 Switch' on"
-               cset "name='SPOL MIX SPKVOL L Switch' on"
-               cset "name='SPOR MIX SPKVOL R Switch' on"
-               cset "name='SPKVOL L Switch' on"
-               cset "name='SPKVOL R Switch' on"
-
-               # Input Configuration
-               cset "name='Stereo1 DMIC Mux' 0"
-               cset "name='Stereo1 ADC2 Mux' 1"
-               cset "name='ADC Capture Switch' on"
-               cset "name='ADC Capture Volume' 74"
-               cset "name='ADC Boost Capture Volume' 3"
-               cset "name='Mono ADC Capture Volume' 74"
-               cset "name='Mono ADC Boost Capture Volume' 2"
-               cset "name='IN Capture Volume' 63"
-               cset "name='RT5650 IF1 ADC Mux' 0"
                cset "name='I2S2 Func Switch' off"
+               cset "name='RT5650 IF1 ADC Mux' 0"
        ]
 
        DisableSequence [
                cdev "hw:chtrt5650"
 
-               # Disable audio output path
-               cset "name='codec_out1 mix 0 pcm0_in Switch' off"
-               cset "name='media0_out mix 0 media1_in Switch' off"
-
-               cset "name='media1_in Gain 0 Switch' off"
-               cset "name='pcm0_in Gain 0 Switch' off"
-               cset "name='codec_out1 Gain 0 Switch' off"
-
-               # Disable audio input path
-               cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
-               cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
-
-               cset "name='media_loop2_out Gain 0 Switch' off"
-               cset "name='pcm1_out Gain 0 Switch' off"
-               cset "name='codec_in0 Gain 0 Switch' off"
+               <codecs/rt5645/DisableSeq.conf>
        ]
 }
 

diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am
index 2b374ac..4cabba0 100644 (file)
--- a/src/conf/ucm/codecs/Makefile.am
+++ b/src/conf/ucm/codecs/Makefile.am
@@ -1,4 +1,5 @@
 SUBDIRS=\
 rt5640 \
+rt5645 \
 rt5651 \
 nau8824

diff --git a/src/conf/ucm/codecs/rt5645/DisableSeq.conf b/src/conf/ucm/codecs/rt5645/DisableSeq.conf
new file mode 100644 (file)
index 0000000..5127d1a
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5645/DisableSeq.conf
@@ -0,0 +1,15 @@
+# Disable audio output path
+cset "name='codec_out1 mix 0 pcm0_in Switch' off"
+cset "name='media0_out mix 0 media1_in Switch' off"
+
+cset "name='media1_in Gain 0 Switch' off"
+cset "name='pcm0_in Gain 0 Switch' off"
+cset "name='codec_out1 Gain 0 Switch' off"
+
+# Disable audio input path
+cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
+cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
+
+cset "name='media_loop2_out Gain 0 Switch' off"
+cset "name='pcm1_out Gain 0 Switch' off"
+cset "name='codec_in0 Gain 0 Switch' off"

diff --git a/src/conf/ucm/codecs/rt5645/EnableSeq.conf b/src/conf/ucm/codecs/rt5645/EnableSeq.conf
new file mode 100644 (file)
index 0000000..d3ad4cf
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5645/EnableSeq.conf
@@ -0,0 +1,46 @@
+# Output Configuration
+cset "name='DAC1 L Mux' IF1 DAC"
+cset "name='DAC1 R Mux' IF1 DAC"
+cset "name='DAC1 MIXL DAC1 Switch' 1"
+cset "name='DAC1 MIXR DAC1 Switch' 1"
+cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
+cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
+
+cset "name='DAC L2 Mux' IF2 DAC"
+cset "name='DAC R2 Mux' IF2 DAC"
+cset "name='Mono DAC MIXL DAC L2 Switch' on"
+cset "name='Mono DAC MIXR DAC R2 Switch' on"
+cset "name='DAC2 Playback Switch' on"
+
+cset "name='HPOVOL MIXL DAC1 Switch' on"
+cset "name='HPOVOL MIXR DAC1 Switch' on"
+cset "name='HPOVOL MIXL DAC2 Switch' on"
+cset "name='HPOVOL MIXR DAC2 Switch' on"
+cset "name='HPO MIX HPVOL Switch' on"
+cset "name='HPOVOL L Switch' on"
+cset "name='HPOVOL R Switch' on"
+
+cset "name='SPK MIXL DAC L1 Switch' on"
+cset "name='SPK MIXR DAC R1 Switch' on"
+cset "name='SPK MIXL DAC L2 Switch' on"
+cset "name='SPK MIXR DAC R2 Switch' on"
+cset "name='SPOL MIX SPKVOL L Switch' on"
+cset "name='SPOR MIX SPKVOL R Switch' on"
+cset "name='SPKVOL L Switch' on"
+cset "name='SPKVOL R Switch' on"
+
+# Input Configuration
+cset "name='Stereo1 DMIC Mux' 0"
+cset "name='Stereo1 ADC2 Mux' 1"
+cset "name='ADC Capture Switch' on"
+
+# 55/63
+cset "name='ADC Capture Volume' 55"
+# set ADC Boost to 0/3, higher vals cause a lot of white noise
+cset "name='ADC Boost Capture Volume' 0"
+# 55/63
+cset "name='Mono ADC Capture Volume' 55"
+# 0/3
+cset "name='Mono ADC Boost Capture Volume' 0"
+# 27/31
+cset "name='IN Capture Volume' 27"

diff --git a/src/conf/ucm/codecs/rt5645/Makefile.am b/src/conf/ucm/codecs/rt5645/Makefile.am
new file mode 100644 (file)
index 0000000..29ce95c
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5645/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/codecs/rt5645
+ucm_DATA = DisableSeq.conf EnableSeq.conf
+EXTRA_DIST = $(ucm_DATA)