Staging: aten2011: fix up the get_reg_sync function

Name it something sane, and fix up the code to be cleaner.

Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index bc212f7..20c731d 100644 (file)
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -230,8 +230,6 @@ static int debug = 0;
 static int RS485mode = 0;
 
 /* setting and get register values */
-static int ATEN2011_get_reg_sync(struct usb_serial_port *port, __u16 reg,
-                                __u16 * val);
 static int ATEN2011_set_Uart_Reg(struct usb_serial_port *port, __u16 reg,
                                 __u16 val);
 static int ATEN2011_get_Uart_Reg(struct usb_serial_port *port, __u16 reg,
@@ -278,17 +276,15 @@ static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
                               ATEN_WDR_TIMEOUT);
 }
 
-static int ATEN2011_get_reg_sync(struct usb_serial_port *port, __u16 reg,
-                                __u16 * val)
+static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
 {
        struct usb_device *dev = port->serial->dev;
-       int ret = 0;
+       int ret;
 
        ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
                              ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
                              ATEN_WDR_TIMEOUT);
-       DPRINTK("ATEN2011_get_reg_sync offset is %x, return val %x\n", reg,
-               *val);
+       dbg("%s: offset is %x, return val %x\n", __func__, reg, *val);
        *val = (*val) & 0x00ff;
        return ret;
 }
@@ -857,9 +853,8 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 //NEED to check the fallowing Block
 
-       status = 0;
        Data = 0x0;
-       status = ATEN2011_get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
+       status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
        if (status < 0) {
                DPRINTK("Reading Spreg failed\n");
                return -1;
@@ -897,10 +892,8 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 //**************************CHECK***************************//
 
-       status = 0;
        Data = 0x0;
-       status =
-           ATEN2011_get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
+       status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
        if (status < 0) {
                DPRINTK("Reading Controlreg failed\n");
                return -1;
@@ -984,15 +977,12 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
 #endif
        //clearing Bulkin and Bulkout Fifo
        Data = 0x0;
-       status = 0;
-       status = ATEN2011_get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
+       status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
 
        Data = Data | 0x0c;
-       status = 0;
        status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
 
        Data = Data & ~0x0c;
-       status = 0;
        status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
        //Finally enable all interrupts
        Data = 0x0;
@@ -1002,18 +992,13 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
 
        //clearing rx_disable
        Data = 0x0;
-       status = 0;
-       status =
-           ATEN2011_get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
+       status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
        Data = Data & ~0x20;
-       status = 0;
        status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
 
        // rx_negate
        Data = 0x0;
-       status = 0;
-       status =
-           ATEN2011_get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
+       status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
        Data = Data | 0x10;
        status = 0;
        status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
@@ -2131,13 +2116,10 @@ static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
        {
                clk_sel_val = 0x0;
                Data = 0x0;
-               status = 0;
                status =
                    ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
                                                    &clk_sel_val);
-               status =
-                   ATEN2011_get_reg_sync(port, ATEN2011_port->SpRegOffset,
-                                         &Data);
+               status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
                if (status < 0) {
                        DPRINTK("reading spreg failed in set_serial_baud\n");
                        return -1;
@@ -2486,10 +2468,8 @@ static int ATEN2011_startup(struct usb_serial *serial)
 
                //enable rx_disable bit in control register
 
-               status =
-                   ATEN2011_get_reg_sync(serial->port[i],
-                                         ATEN2011_port->ControlRegOffset,
-                                         &Data);
+               status = get_reg_sync(serial->port[i],
+                                     ATEN2011_port->ControlRegOffset, &Data);
                if (status < 0) {
                        DPRINTK("Reading ControlReg failed status-0x%x\n",
                                status);