*/
#include "qemu/osdep.h"
+#include "qemu-common.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/units.h"
+#include "sysemu/device_tree.h"
#include "sysemu/numa.h"
#include "sysemu/sysemu.h"
#include "exec/address-spaces.h"
#include "exec/hwaddr.h"
#include "kvm_arm.h"
#include "hw/arm/boot.h"
+#include "hw/block/flash.h"
#include "hw/boards.h"
+#include "hw/ide/internal.h"
+#include "hw/ide/ahci_internal.h"
#include "hw/intc/arm_gicv3_common.h"
+#include "hw/loader.h"
+#include "hw/pci-host/gpex.h"
+#include "hw/usb.h"
+#include "net/net.h"
#define RAMLIMIT_GB 8192
#define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB)
+#define NUM_IRQS 256
+#define NUM_SMMU_IRQS 4
+#define NUM_SATA_PORTS 6
+
+#define VIRTUAL_PMU_IRQ 7
+#define ARCH_GIC_MAINT_IRQ 9
+#define ARCH_TIMER_VIRT_IRQ 11
+#define ARCH_TIMER_S_EL1_IRQ 13
+#define ARCH_TIMER_NS_EL1_IRQ 14
+#define ARCH_TIMER_NS_EL2_IRQ 10
+
enum {
SBSA_FLASH,
SBSA_MEM,
void *fdt;
int fdt_size;
int psci_conduit;
+ PFlashCFI01 *flash[2];
} SBSAMachineState;
#define TYPE_SBSA_MACHINE MACHINE_TYPE_NAME("sbsa-ref")
[SBSA_MEM] = { 0x10000000000ULL, RAMLIMIT_BYTES },
};
+static const int sbsa_ref_irqmap[] = {
+ [SBSA_UART] = 1,
+ [SBSA_RTC] = 2,
+ [SBSA_PCIE] = 3, /* ... to 6 */
+ [SBSA_GPIO] = 7,
+ [SBSA_SECURE_UART] = 8,
+ [SBSA_SECURE_UART_MM] = 9,
+ [SBSA_AHCI] = 10,
+ [SBSA_EHCI] = 11,
+};
+
+/*
+ * Firmware on this machine only uses ACPI table to load OS, these limited
+ * device tree nodes are just to let firmware know the info which varies from
+ * command line parameters, so it is not necessary to be fully compatible
+ * with the kernel CPU and NUMA binding rules.
+ */
+static void create_fdt(SBSAMachineState *sms)
+{
+ void *fdt = create_device_tree(&sms->fdt_size);
+ const MachineState *ms = MACHINE(sms);
+ int cpu;
+
+ if (!fdt) {
+ error_report("create_device_tree() failed");
+ exit(1);
+ }
+
+ sms->fdt = fdt;
+
+ qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,sbsa-ref");
+ qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
+ qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
+
+ if (have_numa_distance) {
+ int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
+ uint32_t *matrix = g_malloc0(size);
+ int idx, i, j;
+
+ for (i = 0; i < nb_numa_nodes; i++) {
+ for (j = 0; j < nb_numa_nodes; j++) {
+ idx = (i * nb_numa_nodes + j) * 3;
+ matrix[idx + 0] = cpu_to_be32(i);
+ matrix[idx + 1] = cpu_to_be32(j);
+ matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]);
+ }
+ }
+
+ qemu_fdt_add_subnode(fdt, "/distance-map");
+ qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix",
+ matrix, size);
+ g_free(matrix);
+ }
+
+ qemu_fdt_add_subnode(sms->fdt, "/cpus");
+
+ for (cpu = sms->smp_cpus - 1; cpu >= 0; cpu--) {
+ char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
+ ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));
+ CPUState *cs = CPU(armcpu);
+
+ qemu_fdt_add_subnode(sms->fdt, nodename);
+
+ if (ms->possible_cpus->cpus[cs->cpu_index].props.has_node_id) {
+ qemu_fdt_setprop_cell(sms->fdt, nodename, "numa-node-id",
+ ms->possible_cpus->cpus[cs->cpu_index].props.node_id);
+ }
+
+ g_free(nodename);
+ }
+}
+
+#define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
+
+static PFlashCFI01 *sbsa_flash_create1(SBSAMachineState *sms,
+ const char *name,
+ const char *alias_prop_name)
+{
+ /*
+ * Create a single flash device. We use the same parameters as
+ * the flash devices on the Versatile Express board.
+ */
+ DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01);
+
+ qdev_prop_set_uint64(dev, "sector-length", SBSA_FLASH_SECTOR_SIZE);
+ qdev_prop_set_uint8(dev, "width", 4);
+ qdev_prop_set_uint8(dev, "device-width", 2);
+ qdev_prop_set_bit(dev, "big-endian", false);
+ qdev_prop_set_uint16(dev, "id0", 0x89);
+ qdev_prop_set_uint16(dev, "id1", 0x18);
+ qdev_prop_set_uint16(dev, "id2", 0x00);
+ qdev_prop_set_uint16(dev, "id3", 0x00);
+ qdev_prop_set_string(dev, "name", name);
+ object_property_add_child(OBJECT(sms), name, OBJECT(dev),
+ &error_abort);
+ object_property_add_alias(OBJECT(sms), alias_prop_name,
+ OBJECT(dev), "drive", &error_abort);
+ return PFLASH_CFI01(dev);
+}
+
+static void sbsa_flash_create(SBSAMachineState *sms)
+{
+ sms->flash[0] = sbsa_flash_create1(sms, "sbsa.flash0", "pflash0");
+ sms->flash[1] = sbsa_flash_create1(sms, "sbsa.flash1", "pflash1");
+}
+
+static void sbsa_flash_map1(PFlashCFI01 *flash,
+ hwaddr base, hwaddr size,
+ MemoryRegion *sysmem)
+{
+ DeviceState *dev = DEVICE(flash);
+
+ assert(size % SBSA_FLASH_SECTOR_SIZE == 0);
+ assert(size / SBSA_FLASH_SECTOR_SIZE <= UINT32_MAX);
+ qdev_prop_set_uint32(dev, "num-blocks", size / SBSA_FLASH_SECTOR_SIZE);
+ qdev_init_nofail(dev);
+
+ memory_region_add_subregion(sysmem, base,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
+ 0));
+}
+
+static void sbsa_flash_map(SBSAMachineState *sms,
+ MemoryRegion *sysmem,
+ MemoryRegion *secure_sysmem)
+{
+ /*
+ * Map two flash devices to fill the SBSA_FLASH space in the memmap.
+ * sysmem is the system memory space. secure_sysmem is the secure view
+ * of the system, and the first flash device should be made visible only
+ * there. The second flash device is visible to both secure and nonsecure.
+ * If sysmem == secure_sysmem this means there is no separate Secure
+ * address space and both flash devices are generally visible.
+ */
+ hwaddr flashsize = sbsa_ref_memmap[SBSA_FLASH].size / 2;
+ hwaddr flashbase = sbsa_ref_memmap[SBSA_FLASH].base;
+
+ sbsa_flash_map1(sms->flash[0], flashbase, flashsize,
+ secure_sysmem);
+ sbsa_flash_map1(sms->flash[1], flashbase + flashsize, flashsize,
+ sysmem);
+}
+
+static bool sbsa_firmware_init(SBSAMachineState *sms,
+ MemoryRegion *sysmem,
+ MemoryRegion *secure_sysmem)
+{
+ int i;
+ BlockBackend *pflash_blk0;
+
+ /* Map legacy -drive if=pflash to machine properties */
+ for (i = 0; i < ARRAY_SIZE(sms->flash); i++) {
+ pflash_cfi01_legacy_drive(sms->flash[i],
+ drive_get(IF_PFLASH, 0, i));
+ }
+
+ sbsa_flash_map(sms, sysmem, secure_sysmem);
+
+ pflash_blk0 = pflash_cfi01_get_blk(sms->flash[0]);
+
+ if (bios_name) {
+ char *fname;
+ MemoryRegion *mr;
+ int image_size;
+
+ if (pflash_blk0) {
+ error_report("The contents of the first flash device may be "
+ "specified with -bios or with -drive if=pflash... "
+ "but you cannot use both options at once");
+ exit(1);
+ }
+
+ /* Fall back to -bios */
+
+ fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ if (!fname) {
+ error_report("Could not find ROM image '%s'", bios_name);
+ exit(1);
+ }
+ mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(sms->flash[0]), 0);
+ image_size = load_image_mr(fname, mr);
+ g_free(fname);
+ if (image_size < 0) {
+ error_report("Could not load ROM image '%s'", bios_name);
+ exit(1);
+ }
+ }
+
+ return pflash_blk0 || bios_name;
+}
+
+static void create_secure_ram(SBSAMachineState *sms,
+ MemoryRegion *secure_sysmem)
+{
+ MemoryRegion *secram = g_new(MemoryRegion, 1);
+ hwaddr base = sbsa_ref_memmap[SBSA_SECURE_MEM].base;
+ hwaddr size = sbsa_ref_memmap[SBSA_SECURE_MEM].size;
+
+ memory_region_init_ram(secram, NULL, "sbsa-ref.secure-ram", size,
+ &error_fatal);
+ memory_region_add_subregion(secure_sysmem, base, secram);
+}
+
+static void create_gic(SBSAMachineState *sms, qemu_irq *pic)
+{
+ DeviceState *gicdev;
+ SysBusDevice *gicbusdev;
+ const char *gictype;
+ uint32_t redist0_capacity, redist0_count;
+ int i;
+
+ gictype = gicv3_class_name();
+
+ gicdev = qdev_create(NULL, gictype);
+ qdev_prop_set_uint32(gicdev, "revision", 3);
+ qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
+ /*
+ * Note that the num-irq property counts both internal and external
+ * interrupts; there are always 32 of the former (mandated by GIC spec).
+ */
+ qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32);
+ qdev_prop_set_bit(gicdev, "has-security-extensions", true);
+
+ redist0_capacity =
+ sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE;
+ redist0_count = MIN(smp_cpus, redist0_capacity);
+
+ qdev_prop_set_uint32(gicdev, "len-redist-region-count", 1);
+ qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count);
+
+ qdev_init_nofail(gicdev);
+ gicbusdev = SYS_BUS_DEVICE(gicdev);
+ sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base);
+ sysbus_mmio_map(gicbusdev, 1, sbsa_ref_memmap[SBSA_GIC_REDIST].base);
+
+ /*
+ * Wire the outputs from each CPU's generic timer and the GICv3
+ * maintenance interrupt signal to the appropriate GIC PPI inputs,
+ * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
+ */
+ for (i = 0; i < smp_cpus; i++) {
+ DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
+ int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
+ int irq;
+ /*
+ * Mapping from the output timer irq lines from the CPU to the
+ * GIC PPI inputs used for this board.
+ */
+ const int timer_irq[] = {
+ [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+ [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+ [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ,
+ [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ,
+ };
+
+ for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
+ qdev_connect_gpio_out(cpudev, irq,
+ qdev_get_gpio_in(gicdev,
+ ppibase + timer_irq[irq]));
+ }
+
+ qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0,
+ qdev_get_gpio_in(gicdev, ppibase
+ + ARCH_GIC_MAINT_IRQ));
+ qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+ qdev_get_gpio_in(gicdev, ppibase
+ + VIRTUAL_PMU_IRQ));
+
+ sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+ sysbus_connect_irq(gicbusdev, i + smp_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+ sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+ sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+ }
+
+ for (i = 0; i < NUM_IRQS; i++) {
+ pic[i] = qdev_get_gpio_in(gicdev, i);
+ }
+}
+
+static void create_uart(const SBSAMachineState *sms, qemu_irq *pic, int uart,
+ MemoryRegion *mem, Chardev *chr)
+{
+ hwaddr base = sbsa_ref_memmap[uart].base;
+ int irq = sbsa_ref_irqmap[uart];
+ DeviceState *dev = qdev_create(NULL, "pl011");
+ SysBusDevice *s = SYS_BUS_DEVICE(dev);
+
+ qdev_prop_set_chr(dev, "chardev", chr);
+ qdev_init_nofail(dev);
+ memory_region_add_subregion(mem, base,
+ sysbus_mmio_get_region(s, 0));
+ sysbus_connect_irq(s, 0, pic[irq]);
+}
+
+static void create_rtc(const SBSAMachineState *sms, qemu_irq *pic)
+{
+ hwaddr base = sbsa_ref_memmap[SBSA_RTC].base;
+ int irq = sbsa_ref_irqmap[SBSA_RTC];
+
+ sysbus_create_simple("pl031", base, pic[irq]);
+}
+
+static DeviceState *gpio_key_dev;
+static void sbsa_ref_powerdown_req(Notifier *n, void *opaque)
+{
+ /* use gpio Pin 3 for power button event */
+ qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
+}
+
+static Notifier sbsa_ref_powerdown_notifier = {
+ .notify = sbsa_ref_powerdown_req
+};
+
+static void create_gpio(const SBSAMachineState *sms, qemu_irq *pic)
+{
+ DeviceState *pl061_dev;
+ hwaddr base = sbsa_ref_memmap[SBSA_GPIO].base;
+ int irq = sbsa_ref_irqmap[SBSA_GPIO];
+
+ pl061_dev = sysbus_create_simple("pl061", base, pic[irq]);
+
+ gpio_key_dev = sysbus_create_simple("gpio-key", -1,
+ qdev_get_gpio_in(pl061_dev, 3));
+
+ /* connect powerdown request */
+ qemu_register_powerdown_notifier(&sbsa_ref_powerdown_notifier);
+}
+
+static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic)
+{
+ hwaddr base = sbsa_ref_memmap[SBSA_AHCI].base;
+ int irq = sbsa_ref_irqmap[SBSA_AHCI];
+ DeviceState *dev;
+ DriveInfo *hd[NUM_SATA_PORTS];
+ SysbusAHCIState *sysahci;
+ AHCIState *ahci;
+ int i;
+
+ dev = qdev_create(NULL, "sysbus-ahci");
+ qdev_prop_set_uint32(dev, "num-ports", NUM_SATA_PORTS);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]);
+
+ sysahci = SYSBUS_AHCI(dev);
+ ahci = &sysahci->ahci;
+ ide_drive_get(hd, ARRAY_SIZE(hd));
+ for (i = 0; i < ahci->ports; i++) {
+ if (hd[i] == NULL) {
+ continue;
+ }
+ ide_create_drive(&ahci->dev[i].port, 0, hd[i]);
+ }
+}
+
+static void create_ehci(const SBSAMachineState *sms, qemu_irq *pic)
+{
+ hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base;
+ int irq = sbsa_ref_irqmap[SBSA_EHCI];
+
+ sysbus_create_simple("platform-ehci-usb", base, pic[irq]);
+}
+
+static void create_smmu(const SBSAMachineState *sms, qemu_irq *pic,
+ PCIBus *bus)
+{
+ hwaddr base = sbsa_ref_memmap[SBSA_SMMU].base;
+ int irq = sbsa_ref_irqmap[SBSA_SMMU];
+ DeviceState *dev;
+ int i;
+
+ dev = qdev_create(NULL, "arm-smmuv3");
+
+ object_property_set_link(OBJECT(dev), OBJECT(bus), "primary-bus",
+ &error_abort);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+ for (i = 0; i < NUM_SMMU_IRQS; i++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
+ }
+}
+
+static void create_pcie(SBSAMachineState *sms, qemu_irq *pic)
+{
+ hwaddr base_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].base;
+ hwaddr size_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].size;
+ hwaddr base_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].base;
+ hwaddr size_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].size;
+ hwaddr base_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].base;
+ hwaddr size_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].size;
+ hwaddr base_pio = sbsa_ref_memmap[SBSA_PCIE_PIO].base;
+ int irq = sbsa_ref_irqmap[SBSA_PCIE];
+ MemoryRegion *mmio_alias, *mmio_alias_high, *mmio_reg;
+ MemoryRegion *ecam_alias, *ecam_reg;
+ DeviceState *dev;
+ PCIHostState *pci;
+ int i;
+
+ dev = qdev_create(NULL, TYPE_GPEX_HOST);
+ qdev_init_nofail(dev);
+
+ /* Map ECAM space */
+ ecam_alias = g_new0(MemoryRegion, 1);
+ ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+ memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
+ ecam_reg, 0, size_ecam);
+ memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias);
+
+ /* Map the MMIO space */
+ mmio_alias = g_new0(MemoryRegion, 1);
+ mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
+ memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
+ mmio_reg, base_mmio, size_mmio);
+ memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias);
+
+ /* Map the MMIO_HIGH space */
+ mmio_alias_high = g_new0(MemoryRegion, 1);
+ memory_region_init_alias(mmio_alias_high, OBJECT(dev), "pcie-mmio-high",
+ mmio_reg, base_mmio_high, size_mmio_high);
+ memory_region_add_subregion(get_system_memory(), base_mmio_high,
+ mmio_alias_high);
+
+ /* Map IO port space */
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio);
+
+ for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]);
+ gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
+ }
+
+ pci = PCI_HOST_BRIDGE(dev);
+ if (pci->bus) {
+ for (i = 0; i < nb_nics; i++) {
+ NICInfo *nd = &nd_table[i];
+
+ if (!nd->model) {
+ nd->model = g_strdup("e1000e");
+ }
+
+ pci_nic_init_nofail(nd, pci->bus, nd->model, NULL);
+ }
+ }
+
+ pci_create_simple(pci->bus, -1, "VGA");
+
+ create_smmu(sms, pic, pci->bus);
+}
+
+static void *sbsa_ref_dtb(const struct arm_boot_info *binfo, int *fdt_size)
+{
+ const SBSAMachineState *board = container_of(binfo, SBSAMachineState,
+ bootinfo);
+
+ *fdt_size = board->fdt_size;
+ return board->fdt;
+}
+
static void sbsa_ref_init(MachineState *machine)
{
SBSAMachineState *sms = SBSA_MACHINE(machine);
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *secure_sysmem = NULL;
MemoryRegion *ram = g_new(MemoryRegion, 1);
+ bool firmware_loaded;
const CPUArchIdList *possible_cpus;
int n, sbsa_max_cpus;
+ qemu_irq pic[NUM_IRQS];
if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) {
error_report("sbsa-ref: CPU type other than the built-in "
}
/*
+ * The Secure view of the world is the same as the NonSecure,
+ * but with a few extra devices. Create it as a container region
+ * containing the system memory at low priority; any secure-only
+ * devices go in at higher priority and take precedence.
+ */
+ secure_sysmem = g_new(MemoryRegion, 1);
+ memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory",
+ UINT64_MAX);
+ memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1);
+
+ firmware_loaded = sbsa_firmware_init(sms, sysmem,
+ secure_sysmem ?: sysmem);
+
+ if (machine->kernel_filename && firmware_loaded) {
+ error_report("sbsa-ref: No fw_cfg device on this machine, "
+ "so -kernel option is not supported when firmware loaded, "
+ "please load OS from hard disk instead");
+ exit(1);
+ }
+
+ /*
* This machine has EL3 enabled, external firmware should supply PSCI
* implementation, so the QEMU's internal PSCI is disabled.
*/
machine->ram_size);
memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram);
+ create_fdt(sms);
+
+ create_secure_ram(sms, secure_sysmem);
+
+ create_gic(sms, pic);
+
+ create_uart(sms, pic, SBSA_UART, sysmem, serial_hd(0));
+ create_uart(sms, pic, SBSA_SECURE_UART, secure_sysmem, serial_hd(1));
+ /* Second secure UART for RAS and MM from EL0 */
+ create_uart(sms, pic, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2));
+
+ create_rtc(sms, pic);
+
+ create_gpio(sms, pic);
+
+ create_ahci(sms, pic);
+
+ create_ehci(sms, pic);
+
+ create_pcie(sms, pic);
+
sms->bootinfo.ram_size = machine->ram_size;
sms->bootinfo.kernel_filename = machine->kernel_filename;
sms->bootinfo.nb_cpus = smp_cpus;
sms->bootinfo.board_id = -1;
sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base;
+ sms->bootinfo.get_dtb = sbsa_ref_dtb;
+ sms->bootinfo.firmware_loaded = firmware_loaded;
arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo);
}
return idx % nb_numa_nodes;
}
+static void sbsa_ref_instance_init(Object *obj)
+{
+ SBSAMachineState *sms = SBSA_MACHINE(obj);
+
+ sbsa_flash_create(sms);
+}
+
static void sbsa_ref_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
static const TypeInfo sbsa_ref_info = {
.name = TYPE_SBSA_MACHINE,
.parent = TYPE_MACHINE,
+ .instance_init = sbsa_ref_instance_init,
.class_init = sbsa_ref_class_init,
.instance_size = sizeof(SBSAMachineState),
};