gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583

The PMIC device RC5T583 from RICOH supports 8 gpios.
Adding gpio driver for this device to access the pins
control through gpio library.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[grant.likely: slight cosmetic changes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 25535eb..7028f7b 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -301,6 +301,15 @@ config GPIO_PCF857X
          This driver provides an in-kernel interface to those GPIOs using
          platform-neutral GPIO calls.
 
+config GPIO_RC5T583
+       bool "RICOH RC5T583 GPIO"
+       depends on MFD_RC5T583
+       help
+         Select this option to enable GPIO driver for the Ricoh RC5T583
+         chip family.
+         This driver provides the support for driving/reading the gpio pins
+         of RC5T583 device through standard gpio library.
+
 config GPIO_SX150X
        bool "Semtech SX150x I2C GPIO expander"
        depends on I2C=y

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 7862f49..8f36637 100644 (file)
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_PCF857X)    += gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)         += gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)       += gpio-pl061.o
 obj-$(CONFIG_GPIO_PXA)         += gpio-pxa.o
+obj-$(CONFIG_GPIO_RC5T583)     += gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)     += gpio-rdc321x.o
 obj-$(CONFIG_PLAT_SAMSUNG)     += gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)      += gpio-sa1100.o

diff --git a/drivers/gpio/gpio-rc5t583.c b/drivers/gpio/gpio-rc5t583.c
new file mode 100644 (file)
index 0000000..08428bf
--- /dev/null
+++ b/drivers/gpio/gpio-rc5t583.c
@@ -0,0 +1,180 @@
+/*
+ * GPIO driver for RICOH583 power management chip.
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *     Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rc5t583.h>
+
+struct rc5t583_gpio {
+       struct gpio_chip gpio_chip;
+       struct rc5t583 *rc5t583;
+};
+
+static inline struct rc5t583_gpio *to_rc5t583_gpio(struct gpio_chip *chip)
+{
+       return container_of(chip, struct rc5t583_gpio, gpio_chip);
+}
+
+static int rc5t583_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+       struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+       struct device *parent = rc5t583_gpio->rc5t583->dev;
+       uint8_t val = 0;
+       int ret;
+
+       ret = rc5t583_read(parent, RC5T583_GPIO_MON_IOIN, &val);
+       if (ret < 0)
+               return ret;
+
+       return !!(val & BIT(offset));
+}
+
+static void rc5t583_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+       struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+       struct device *parent = rc5t583_gpio->rc5t583->dev;
+       if (val)
+               rc5t583_set_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
+       else
+               rc5t583_clear_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
+}
+
+static int rc5t583_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
+{
+       struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+       struct device *parent = rc5t583_gpio->rc5t583->dev;
+       int ret;
+
+       ret = rc5t583_clear_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
+       if (ret < 0)
+               return ret;
+
+       /* Set pin to gpio mode */
+       return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_dir_output(struct gpio_chip *gc, unsigned offset,
+                       int value)
+{
+       struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+       struct device *parent = rc5t583_gpio->rc5t583->dev;
+       int ret;
+
+       rc5t583_gpio_set(gc, offset, value);
+       ret = rc5t583_set_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
+       if (ret < 0)
+               return ret;
+
+       /* Set pin to gpio mode */
+       return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+       struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+
+       if ((offset >= 0) && (offset < 8))
+               return rc5t583_gpio->rc5t583->irq_base +
+                               RC5T583_IRQ_GPIO0 + offset;
+       return -EINVAL;
+}
+
+static void rc5t583_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+       struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+       struct device *parent = rc5t583_gpio->rc5t583->dev;
+
+       rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int __devinit rc5t583_gpio_probe(struct platform_device *pdev)
+{
+       struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
+       struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
+       struct rc5t583_gpio *rc5t583_gpio;
+
+       rc5t583_gpio = devm_kzalloc(&pdev->dev, sizeof(*rc5t583_gpio),
+                                       GFP_KERNEL);
+       if (!rc5t583_gpio) {
+               dev_warn(&pdev->dev, "Mem allocation for rc5t583_gpio failed");
+               return -ENOMEM;
+       }
+
+       rc5t583_gpio->gpio_chip.label = "gpio-rc5t583",
+       rc5t583_gpio->gpio_chip.owner = THIS_MODULE,
+       rc5t583_gpio->gpio_chip.free = rc5t583_gpio_free,
+       rc5t583_gpio->gpio_chip.direction_input = rc5t583_gpio_dir_input,
+       rc5t583_gpio->gpio_chip.direction_output = rc5t583_gpio_dir_output,
+       rc5t583_gpio->gpio_chip.set = rc5t583_gpio_set,
+       rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get,
+       rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq,
+       rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO,
+       rc5t583_gpio->gpio_chip.can_sleep = 1,
+       rc5t583_gpio->gpio_chip.dev = &pdev->dev;
+       rc5t583_gpio->gpio_chip.base = -1;
+       rc5t583_gpio->rc5t583 = rc5t583;
+
+       if (pdata && pdata->gpio_base)
+               rc5t583_gpio->gpio_chip.base = pdata->gpio_base;
+
+       platform_set_drvdata(pdev, rc5t583_gpio);
+
+       return gpiochip_add(&rc5t583_gpio->gpio_chip);
+}
+
+static int __devexit rc5t583_gpio_remove(struct platform_device *pdev)
+{
+       struct rc5t583_gpio *rc5t583_gpio = platform_get_drvdata(pdev);
+
+       return gpiochip_remove(&rc5t583_gpio->gpio_chip);
+}
+
+static struct platform_driver rc5t583_gpio_driver = {
+       .driver = {
+               .name    = "rc5t583-gpio",
+               .owner   = THIS_MODULE,
+       },
+       .probe          = rc5t583_gpio_probe,
+       .remove         = __devexit_p(rc5t583_gpio_remove),
+};
+
+static int __init rc5t583_gpio_init(void)
+{
+       return platform_driver_register(&rc5t583_gpio_driver);
+}
+subsys_initcall(rc5t583_gpio_init);
+
+static void __exit rc5t583_gpio_exit(void)
+{
+       platform_driver_unregister(&rc5t583_gpio_driver);
+}
+module_exit(rc5t583_gpio_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("GPIO interface for RC5T583");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rc5t583-gpio");

diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
index 0b64b19..7875370 100644 (file)
--- a/include/linux/mfd/rc5t583.h
+++ b/include/linux/mfd/rc5t583.h
@@ -272,11 +272,13 @@ struct rc5t583 {
  * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
  * The board specific data is provided through this structure.
  * @irq_base: Irq base number on which this device registers their interrupts.
+ * @gpio_base: GPIO base from which gpio of this device will start.
  * @enable_shutdown: Enable shutdown through the input pin "shutdown".
  */
 
 struct rc5t583_platform_data {
        int             irq_base;
+       int             gpio_base;
        bool            enable_shutdown;
 };