struct ab8500_pwm_chip {
struct pwm_chip chip;
+ unsigned int hwid;
};
+static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct ab8500_pwm_chip, chip);
+}
+
static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
int ret;
u8 reg;
unsigned int higher_val, lower_val;
+ struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
if (state->polarity != PWM_POLARITY_NORMAL)
return -EINVAL;
if (!state->enabled) {
ret = abx500_mask_and_set_register_interruptible(chip->dev,
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
- 1 << (chip->base - 1), 0);
+ 1 << ab8500->hwid, 0);
if (ret < 0)
dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
*/
higher_val = ((state->duty_cycle & 0x0300) >> 8);
- reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2);
+ reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
reg, (u8)lower_val);
ret = abx500_mask_and_set_register_interruptible(chip->dev,
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
- 1 << (chip->base - 1), 1 << (chip->base - 1));
+ 1 << ab8500->hwid, 1 << ab8500->hwid);
if (ret < 0)
dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
pwm->label, ret);
struct ab8500_pwm_chip *ab8500;
int err;
+ if (pdev->id < 1 || pdev->id > 31)
+ return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
+
/*
* Nothing to be done in probe, this is required to get the
* device which is required for ab8500 read and write
ab8500->chip.dev = &pdev->dev;
ab8500->chip.ops = &ab8500_pwm_ops;
ab8500->chip.npwm = 1;
+ ab8500->hwid = pdev->id - 1;
err = pwmchip_add(&ab8500->chip);
if (err < 0)