XOP encoding bits and logic.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146397 91177308-0d34-0410-b5e6-96231b3b80d8

diff --git a/lib/Target/X86/MCTargetDesc/X86BaseInfo.h b/lib/Target/X86/MCTargetDesc/X86BaseInfo.h
index 213a79d..662ac1d 100644 (file)
--- a/lib/Target/X86/MCTargetDesc/X86BaseInfo.h
+++ b/lib/Target/X86/MCTargetDesc/X86BaseInfo.h
@@ -304,6 +304,12 @@ namespace X86II {
     // TAXD - Prefix before and after 0x0F. Combination of TA and XD.
     TAXD = 19 << Op0Shift,
 
+    // XOP8 - Prefix to include use of imm byte.
+    XOP8 = 20 << Op0Shift,
+
+    // XOP9 - Prefix to exclude use of imm byte.
+    XOP9 = 21 << Op0Shift,
+
     //===------------------------------------------------------------------===//
     // REX_W - REX prefixes are instruction prefixes used in 64-bit mode.
     // They are used to specify GPRs and SSE registers, 64-bit operand size,
@@ -423,7 +429,11 @@ namespace X86II {
     /// XOP_W - Same bit as VEX_W. Used to indicate swapping of
     /// operand 3 and 4 to be encoded in ModRM or I8IMM. This is used
     /// for FMA4 and XOP instructions.
-    XOP_W = 1U << 8
+    XOP_W = 1U << 8,
+
+    /// XOP - Opcode prefix used by XOP instructions.
+    XOP = 1U << 9
+
   };
 
   // getBaseOpcodeFor - This function returns the "base" X86 opcode for the

diff --git a/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp b/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp
index 4d2ed98..8e14cb1 100644 (file)
--- a/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp
+++ b/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp
@@ -435,6 +435,9 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   // swap operand 3 and 4 for FMA4 and XOP instructions
   unsigned char XOP_W = 0;
 
+  // XOP: Use XOP prefix byte 0x8f instead of VEX.
+  unsigned char XOP = 0;
+
   // VEX_5M (VEX m-mmmmm field):
   //
   //  0b00000: Reserved for future use
@@ -442,7 +445,8 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   //  0b00010: implied 0F 38 leading opcode bytes
   //  0b00011: implied 0F 3A leading opcode bytes
   //  0b00100-0b11111: Reserved for future use
-  //
+  //  0b01000: XOP map select - 08h instructions with imm byte
+  //  0b10001: XOP map select - 09h instructions with no imm byte
   unsigned char VEX_5M = 0x1;
 
   // VEX_4V (VEX vvvv field): a register specifier
@@ -476,6 +480,9 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   if ((TSFlags >> X86II::VEXShift) & X86II::XOP_W)
     XOP_W = 1;
 
+  if ((TSFlags >> X86II::VEXShift) & X86II::XOP)
+    XOP = 1;
+
   if ((TSFlags >> X86II::VEXShift) & X86II::VEX_L)
     VEX_L = 1;
 
@@ -505,6 +512,12 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   case X86II::XD:  // F2 0F
     VEX_PP = 0x3;
     break;
+  case X86II::XOP8:
+    VEX_5M = 0x8;
+    break;
+  case X86II::XOP9:
+    VEX_5M = 0x9;
+    break;
   case X86II::A6:  // Bypass: Not used by VEX
   case X86II::A7:  // Bypass: Not used by VEX
   case X86II::TB:  // Bypass: Not used by VEX
@@ -512,6 +525,7 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
     break;  // No prefix!
   }
 
+
   // Set the vector length to 256-bit if YMM0-YMM15 is used
   for (unsigned i = 0; i != MI.getNumOperands(); ++i) {
     if (!MI.getOperand(i).isReg())
@@ -646,14 +660,14 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   //
   unsigned char LastByte = VEX_PP | (VEX_L << 2) | (VEX_4V << 3);
 
-  if (VEX_B && VEX_X && !VEX_W && (VEX_5M == 1)) { // 2 byte VEX prefix
+  if (VEX_B && VEX_X && !VEX_W && !XOP && (VEX_5M == 1)) { // 2 byte VEX prefix
     EmitByte(0xC5, CurByte, OS);
     EmitByte(LastByte | (VEX_R << 7), CurByte, OS);
     return;
   }
 
   // 3 byte VEX prefix
-  EmitByte(0xC4, CurByte, OS);
+  EmitByte(XOP ? 0x8F : 0xC4, CurByte, OS);
   EmitByte(VEX_R << 7 | VEX_X << 6 | VEX_B << 5 | VEX_5M, CurByte, OS);
   EmitByte(LastByte | ((VEX_W | XOP_W) << 7), CurByte, OS);
 }
@@ -1097,7 +1111,7 @@ EncodeInstruction(const MCInst &MI, raw_ostream &OS,
   // according to the right size for the instruction.
   if (CurOp != NumOps) {
     // The last source register of a 4 operand instruction in AVX is encoded
-    // in bits[7:4] of a immediate byte, and bits[3:0] are ignored.
+    // in bits[7:4] of a immediate byte.
     if ((TSFlags >> X86II::VEXShift) & X86II::VEX_I8IMM) {
       const MCOperand &MO = MI.getOperand(HasXOP_W ? XOP_W_I8IMMOperand
                                                    : CurOp);
@@ -1105,6 +1119,16 @@ EncodeInstruction(const MCInst &MI, raw_ostream &OS,
       bool IsExtReg = X86II::isX86_64ExtendedReg(MO.getReg());
       unsigned RegNum = (IsExtReg ? (1 << 7) : 0);
       RegNum |= GetX86RegNum(MO) << 4;
+      // If there is an additional 5th operand it must be an immediate, which
+      // is encoded in bits[3:0]
+      if(CurOp != NumOps) {
+        const MCOperand &MIMM = MI.getOperand(CurOp++);
+        if(MIMM.isImm()) {
+          unsigned Val = MIMM.getImm();
+          assert(Val < 16 && "Immediate operand value out of range");
+          RegNum |= Val;
+        }
+      }
       EmitImmediate(MCOperand::CreateImm(RegNum), 1, FK_Data_1, CurByte, OS,
                     Fixups);
     } else {

diff --git a/lib/Target/X86/X86InstrFormats.td b/lib/Target/X86/X86InstrFormats.td
index 3d4e3d0..8dfe1ce 100644 (file)
--- a/lib/Target/X86/X86InstrFormats.td
+++ b/lib/Target/X86/X86InstrFormats.td
@@ -110,6 +110,8 @@ class A7     { bits<5> Prefix = 16; }
 class T8XD   { bits<5> Prefix = 17; }
 class T8XS   { bits<5> Prefix = 18; }
 class TAXD   { bits<5> Prefix = 19; }
+class XOP8   { bits<5> Prefix = 20; }
+class XOP9   { bits<5> Prefix = 21; }
 class VEX    { bit hasVEXPrefix = 1; }
 class VEX_W  { bit hasVEX_WPrefix = 1; }
 class VEX_4V : VEX { bit hasVEX_4VPrefix = 1; }
@@ -119,6 +121,7 @@ class VEX_L  { bit hasVEX_L = 1; }
 class VEX_LIG { bit ignoresVEX_L = 1; }
 class Has3DNow0F0FOpcode  { bit has3DNow0F0FOpcode = 1; }
 class XOP_W { bit hasXOP_WPrefix = 1; }
+class XOP { bit hasXOP_Prefix = 1; }
 class X86Inst<bits<8> opcod, Format f, ImmType i, dag outs, dag ins,
               string AsmStr, Domain d = GenericDomain>
   : Instruction {
@@ -159,6 +162,7 @@ class X86Inst<bits<8> opcod, Format f, ImmType i, dag outs, dag ins,
   bit ignoresVEX_L = 0;     // Does this instruction ignore the L-bit
   bit has3DNow0F0FOpcode =0;// Wacky 3dNow! encoding?
   bit hasXOP_WPrefix = 0;   // Same bit as VEX_W, but used for swapping operands
+  bit hasXOP_Prefix = 0;    // Does this inst require an XOP prefix?
 
   // TSFlags layout should be kept in sync with X86InstrInfo.h.
   let TSFlags{5-0}   = FormBits;
@@ -181,6 +185,7 @@ class X86Inst<bits<8> opcod, Format f, ImmType i, dag outs, dag ins,
   let TSFlags{39}    = ignoresVEX_L;
   let TSFlags{40}    = has3DNow0F0FOpcode;
   let TSFlags{41}    = hasXOP_WPrefix;
+  let TSFlags{42}    = hasXOP_Prefix;
 }
 
 class PseudoI<dag oops, dag iops, list<dag> pattern>