OSDN Git Service

net: dsa: b53: Configure VLANs while not filtering
authorFlorian Fainelli <f.fainelli@gmail.com>
Wed, 23 Sep 2020 21:40:38 +0000 (14:40 -0700)
committerDavid S. Miller <davem@davemloft.net>
Thu, 24 Sep 2020 01:13:45 +0000 (18:13 -0700)
Update the B53 driver to support VLANs while not filtering. This
requires us to enable VLAN globally within the switch upon driver
initial configuration (dev->vlan_enabled).

We also need to remove the code that dealt with PVID re-configuration in
b53_vlan_filtering() since that function worked under the assumption
that it would only be called to make a bridge VLAN filtering, or not
filtering, and we would attempt to move the port's PVID accordingly.

Now that VLANs are programmed all the time, even in the case of a
non-VLAN filtering bridge, we would be programming a default_pvid for
the bridged switch ports.

We need the DSA receive path to pop the VLAN tag if it is the bridge's
default_pvid because the CPU port is always programmed tagged in the
programmed VLANs. In order to do so we utilize the
dsa_untag_bridge_pvid() helper introduced in the commit before within
net/dsa/tag_brcm.c.

Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/b53/b53_common.c
drivers/net/dsa/b53/b53_priv.h
net/dsa/tag_brcm.c

index 6a5796c..73507cf 100644 (file)
@@ -1377,23 +1377,6 @@ EXPORT_SYMBOL(b53_phylink_mac_link_up);
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
 {
        struct b53_device *dev = ds->priv;
-       u16 pvid, new_pvid;
-
-       b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
-       if (!vlan_filtering) {
-               /* Filtering is currently enabled, use the default PVID since
-                * the bridge does not expect tagging anymore
-                */
-               dev->ports[port].pvid = pvid;
-               new_pvid = b53_default_pvid(dev);
-       } else {
-               /* Filtering is currently disabled, restore the previous PVID */
-               new_pvid = dev->ports[port].pvid;
-       }
-
-       if (pvid != new_pvid)
-               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
-                           new_pvid);
 
        b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
 
@@ -2619,6 +2602,8 @@ struct b53_device *b53_switch_alloc(struct device *base,
        dev->priv = priv;
        dev->ops = ops;
        ds->ops = &b53_switch_ops;
+       ds->configure_vlan_while_not_filtering = true;
+       dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
        mutex_init(&dev->reg_mutex);
        mutex_init(&dev->stats_mutex);
 
index c55c0a9..24893b5 100644 (file)
@@ -91,7 +91,6 @@ enum {
 struct b53_port {
        u16             vlan_ctl_mask;
        struct ethtool_eee eee;
-       u16             pvid;
 };
 
 struct b53_vlan {
index cc8512b..1dab212 100644 (file)
@@ -140,6 +140,11 @@ static struct sk_buff *brcm_tag_rcv_ll(struct sk_buff *skb,
        /* Remove Broadcom tag and update checksum */
        skb_pull_rcsum(skb, BRCM_TAG_LEN);
 
+       /* Set the MAC header to where it should point for
+        * dsa_untag_bridge_pvid() to parse the correct VLAN header.
+        */
+       skb_set_mac_header(skb, -ETH_HLEN);
+
        skb->offload_fwd_mark = 1;
 
        return skb;
@@ -191,7 +196,7 @@ static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev,
                nskb->data - ETH_HLEN - BRCM_TAG_LEN,
                2 * ETH_ALEN);
 
-       return nskb;
+       return dsa_untag_bridge_pvid(nskb);
 }
 
 static const struct dsa_device_ops brcm_netdev_ops = {
@@ -219,8 +224,14 @@ static struct sk_buff *brcm_tag_rcv_prepend(struct sk_buff *skb,
                                            struct net_device *dev,
                                            struct packet_type *pt)
 {
+       struct sk_buff *nskb;
+
        /* tag is prepended to the packet */
-       return brcm_tag_rcv_ll(skb, dev, pt, ETH_HLEN);
+       nskb = brcm_tag_rcv_ll(skb, dev, pt, ETH_HLEN);
+       if (!nskb)
+               return nskb;
+
+       return dsa_untag_bridge_pvid(nskb);
 }
 
 static const struct dsa_device_ops brcm_prepend_netdev_ops = {