hfa384x_copy_from_aux(
hfa384x_t *hw, u32 cardaddr, u32 auxctl, void *buf, unsigned int len)
{
- WLAN_LOG_ERROR("not used in USB.\n");
+ printk(KERN_ERR "not used in USB.\n");
}
hfa384x_copy_to_aux(
hfa384x_t *hw, u32 cardaddr, u32 auxctl, void *buf, unsigned int len)
{
- WLAN_LOG_ERROR("not used in USB.\n");
+ printk(KERN_ERR "not used in USB.\n");
}
result=usb_reset_device(hw->usb);
if(result<0) {
- WLAN_LOG_ERROR("usb_reset_device() failed, result=%d.\n",result);
+ printk(KERN_ERR "usb_reset_device() failed, result=%d.\n",result);
}
return result;
result = hfa384x_cmd_download(hw, HFA384x_PROGMODE_NV,
burnlo, burnhi, burnlen);
if ( result ) {
- WLAN_LOG_ERROR("download(NV,lo=%x,hi=%x,len=%x) "
+ printk(KERN_ERR "download(NV,lo=%x,hi=%x,len=%x) "
"cmd failed, result=%d. Aborting d/l\n",
burnlo, burnhi, burnlen, result);
goto exit_proc;
Comment out for debugging, assume the write was successful.
if (result) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Write to dl buffer failed, "
"result=0x%04x. Aborting.\n",
result);
HFA384x_PROGMODE_NVWRITE,
0,0,0);
if ( result ) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"download(NVWRITE,lo=%x,hi=%x,len=%x) "
"cmd failed, result=%d. Aborting d/l\n",
burnlo, burnhi, burnlen, result);
----------------------------------------------------------------*/
int hfa384x_drvr_handover( hfa384x_t *hw, u8 *addr)
{
- WLAN_LOG_ERROR("Not currently supported in USB!\n");
+ printk(KERN_ERR "Not currently supported in USB!\n");
return -EIO;
}
/* Check that a port isn't active */
for ( i = 0; i < HFA384x_PORTID_MAX; i++) {
if ( hw->port_enabled[i] ) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Can't download with a macport enabled.\n");
return -EINVAL;
}
/* Check that we're not already in a download state */
if ( hw->dlstate != HFA384x_DLSTATE_DISABLED ) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Download state not disabled.\n");
return -EINVAL;
}
pdrcode = hfa384x2host_16(pda[currpdr+1]);
/* Test the record length */
if ( pdrlen > HFA384x_PDR_LEN_MAX || pdrlen == 0) {
- WLAN_LOG_ERROR("pdrlen invalid=%d\n",
+ printk(KERN_ERR "pdrlen invalid=%d\n",
pdrlen);
pdaok = 0;
break;
}
/* Test the code */
if ( !hfa384x_isgood_pdrcode(pdrcode) ) {
- WLAN_LOG_ERROR("pdrcode invalid=%d\n",
+ printk(KERN_ERR "pdrcode invalid=%d\n",
pdrcode);
pdaok = 0;
break;
*/
result = usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_in, &status);
if (result < 0) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Cannot get bulk in endpoint status.\n");
goto done;
}
if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_in)) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Failed to reset bulk in endpoint.\n");
}
result = usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_out, &status);
if (result < 0) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Cannot get bulk out endpoint status.\n");
goto done;
}
if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_out)) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Failed to reset bulk out endpoint.\n");
}
/* Post the IN urb */
result = submit_rx_urb(hw, GFP_KERNEL);
if (result != 0) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Fatal, failed to submit RX URB, result=%d\n",
result);
goto done;
result = result2 = hfa384x_cmd_initialize(hw);
if (result1 != 0) {
if (result2 != 0) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"cmd_initialize() failed on two attempts, results %d and %d\n",
result1, result2);
usb_kill_urb(&hw->rx_urb);
result = 1;
ret = submit_tx_urb(hw, &hw->tx_urb, GFP_ATOMIC);
if ( ret != 0 ) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"submit_tx_urb() failed, error=%d\n", ret);
result = 3;
}
break;
default:
- WLAN_LOG_ERROR("CTLX[%d] not in a terminating state(%s)\n",
+ printk(KERN_ERR "CTLX[%d] not in a terminating state(%s)\n",
hfa384x2host_16(ctlx->outbuf.type),
ctlxstr(ctlx->state));
break;
break;
}
- WLAN_LOG_ERROR("Failed to submit CTLX[%d]: error=%d\n",
+ printk(KERN_ERR "Failed to submit CTLX[%d]: error=%d\n",
hfa384x2host_16(head->outbuf.type), result);
unlocked_usbctlx_complete(hw, head);
} /* while */
result = submit_rx_urb(hw, GFP_ATOMIC);
if (result != 0) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Fatal, failed to resubmit rx_urb. error=%d\n",
result);
}
/*
* Throw this CTLX away ...
*/
- WLAN_LOG_ERROR("Matched IN URB, CTLX[%d] in invalid state(%s)."
+ printk(KERN_ERR "Matched IN URB, CTLX[%d] in invalid state(%s)."
" Discarded.\n",
hfa384x2host_16(ctlx->outbuf.type),
ctlxstr(ctlx->state));
}
if ( (skb = dev_alloc_skb(skblen)) == NULL ) {
- WLAN_LOG_ERROR("alloc_skb failed trying to allocate %d bytes\n", skblen);
+ printk(KERN_ERR "alloc_skb failed trying to allocate %d bytes\n", skblen);
return;
}
default:
/* This is NOT a valid CTLX "success" state! */
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Illegal CTLX[%d] success state(%s, %d) in OUT URB\n",
hfa384x2host_16(ctlx->outbuf.type),
ctlxstr(ctlx->state), urb->status);
memcpy(p80211_hdr->a3.a3, &e_hdr.saddr, ETH_ALEN);
break;
default:
- WLAN_LOG_ERROR("Error: Converting eth to wlan in unknown mode.\n");
+ printk(KERN_ERR "Error: Converting eth to wlan in unknown mode.\n");
return 1;
break;
}
} else {
payload_offset = WLAN_HDR_A4_LEN;
if (payload_length < WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN) {
- WLAN_LOG_ERROR("A4 frame too short!\n");
+ printk(KERN_ERR "A4 frame too short!\n");
return 1;
}
payload_length -= (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN);
/* perform de-wep if necessary.. */
if ((wlandev->hostwep & HOSTWEP_PRIVACYINVOKED) && WLAN_GET_FC_ISWEP(fc) && (wlandev->hostwep & HOSTWEP_DECRYPT)) {
if (payload_length <= 8) {
- WLAN_LOG_ERROR("WEP frame too short (%u).\n",
+ printk(KERN_ERR "WEP frame too short (%u).\n",
skb->len);
return 1;
}
if ( payload_length > (netdev->mtu + WLAN_ETHHDR_LEN)) {
/* A bogus length ethfrm has been encap'd. */
/* Is someone trying an oflow attack? */
- WLAN_LOG_ERROR("ENCAP frame too large (%d > %d)\n",
+ printk(KERN_ERR "ENCAP frame too large (%d > %d)\n",
payload_length, netdev->mtu + WLAN_ETHHDR_LEN);
return 1;
}
if ( payload_length > netdev->mtu ) {
/* A bogus length ethfrm has been sent. */
/* Is someone trying an oflow attack? */
- WLAN_LOG_ERROR("SNAP frame too large (%d > %d)\n",
+ printk(KERN_ERR "SNAP frame too large (%d > %d)\n",
payload_length, netdev->mtu);
return 1;
}
> netdev->mtu) {
/* A bogus length ethfrm has been sent. */
/* Is someone trying an oflow attack? */
- WLAN_LOG_ERROR("DIXII frame too large (%ld > %d)\n",
+ printk(KERN_ERR "DIXII frame too large (%ld > %d)\n",
(long int) (payload_length - sizeof(wlan_llc_t) -
sizeof(wlan_snap_t)),
netdev->mtu);
if ( payload_length > netdev->mtu ) {
/* A bogus length ethfrm has been sent. */
/* Is someone trying an oflow attack? */
- WLAN_LOG_ERROR("OTHER frame too large (%d > %d)\n",
+ printk(KERN_ERR "OTHER frame too large (%d > %d)\n",
payload_length,
netdev->mtu);
return 1;
/* If these already have metadata, we error out! */
if (P80211SKB_RXMETA(skb) != NULL) {
- WLAN_LOG_ERROR("%s: RXmeta already attached!\n",
+ printk(KERN_ERR "%s: RXmeta already attached!\n",
wlandev->name);
result = 0;
goto exit;
rxmeta = kmalloc(sizeof(p80211_rxmeta_t), GFP_ATOMIC);
if ( rxmeta == NULL ) {
- WLAN_LOG_ERROR("%s: Failed to allocate rxmeta.\n",
+ printk(KERN_ERR "%s: Failed to allocate rxmeta.\n",
wlandev->name);
result = 1;
goto exit;
if ( meta && meta->rx) {
p80211skb_rxmeta_detach(skb);
} else {
- WLAN_LOG_ERROR("Freeing an skb (%p) w/ no frmmeta.\n", skb);
+ printk(KERN_ERR "Freeing an skb (%p) w/ no frmmeta.\n", skb);
}
dev_kfree_skb(skb);
* change the netdev address
*/
if ( result != 0 || resultcode->data != P80211ENUM_resultcode_success) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"Low-level driver failed dot11req_mibset(dot11MACAddress).\n");
result = -EADDRNOTAVAIL;
} else {
/* Allocate and initialize the struct device */
dev = alloc_netdev(0,"wlan%d",ether_setup);
if ( dev == NULL ) {
- WLAN_LOG_ERROR("Failed to alloc netdev.\n");
+ printk(KERN_ERR "Failed to alloc netdev.\n");
result = 1;
} else {
wlandev->netdev = dev;
tasklet_kill(&wlandev->rx_bh);
if (wlandev->netdev == NULL ) {
- WLAN_LOG_ERROR("called without wlandev->netdev set.\n");
+ printk(KERN_ERR "called without wlandev->netdev set.\n");
result = 1;
} else {
free_netdev(wlandev->netdev);
/* Check Permissions */
if (!capable(CAP_NET_ADMIN) &&
(msg->msgcode != DIDmsg_dot11req_mibget)) {
- WLAN_LOG_ERROR("%s: only dot11req_mibget allowed for non-root.\n", wlandev->name);
+ printk(KERN_ERR "%s: only dot11req_mibget allowed for non-root.\n", wlandev->name);
return -EPERM;
}
int i = 0;
if (wlandev->macmode == WLAN_MACMODE_ESS_AP) {
- WLAN_LOG_ERROR("Can't scan in AP mode\n");
+ printk(KERN_ERR "Can't scan in AP mode\n");
err = (-EOPNOTSUPP);
goto exit;
}
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(1,3,2)) {
- WLAN_LOG_ERROR("HostScan not supported with current firmware (<1.3.2).\n");
+ printk(KERN_ERR "HostScan not supported with current firmware (<1.3.2).\n");
result = 1;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto exit;
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFROAMINGMODE, &roamingmode);
if ( result ) {
- WLAN_LOG_ERROR("getconfig(ROAMMODE) failed. result=%d\n",
+ printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
HFA384x_RID_CNFROAMINGMODE,
HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
if ( result ) {
- WLAN_LOG_ERROR("setconfig(ROAMINGMODE) failed. result=%d\n",
+ printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
/* Enable the MAC port if it's not already enabled */
result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
if ( result ) {
- WLAN_LOG_ERROR("getconfig(PORTSTATUS) failed. "
+ printk(KERN_ERR "getconfig(PORTSTATUS) failed. "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
HFA384x_RID_CNFROAMINGMODE,
HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
if ( result ) {
- WLAN_LOG_ERROR("setconfig(ROAMINGMODE) failed. result=%d\n", result);
+ printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
wordbuf, HFA384x_RID_CNFOWNSSID_LEN);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set OwnSSID.\n");
+ printk(KERN_ERR "Failed to set OwnSSID.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
wordbuf, HFA384x_RID_CNFDESIREDSSID_LEN);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set DesiredSSID.\n");
+ printk(KERN_ERR "Failed to set DesiredSSID.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
HFA384x_RID_CNFPORTTYPE,
HFA384x_PORTTYPE_IBSS);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set CNFPORTTYPE.\n");
+ printk(KERN_ERR "Failed to set CNFPORTTYPE.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
HFA384x_RID_CREATEIBSS,
HFA384x_CREATEIBSS_JOINCREATEIBSS);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set CREATEIBSS.\n");
+ printk(KERN_ERR "Failed to set CREATEIBSS.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = hfa384x_drvr_enable(hw, 0);
if ( result ) {
- WLAN_LOG_ERROR("drvr_enable(0) failed. "
+ printk(KERN_ERR "drvr_enable(0) failed. "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
HFA384x_RID_HOSTSCAN, &scanreq,
sizeof(hfa384x_HostScanRequest_data_t));
if ( result ) {
- WLAN_LOG_ERROR("setconfig(SCANREQUEST) failed. result=%d\n",
+ printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
if (istmpenable) {
result = hfa384x_drvr_disable(hw, 0);
if ( result ) {
- WLAN_LOG_ERROR("drvr_disable(0) failed. "
+ printk(KERN_ERR "drvr_disable(0) failed. "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
roamingmode);
if ( result ) {
- WLAN_LOG_ERROR("setconfig(ROAMMODE) failed. result=%d\n",
+ printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
if (! hw->scanresults) {
- WLAN_LOG_ERROR("dot11req_scan_results can only be used after a successful dot11req_scan.\n");
+ printk(KERN_ERR "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
result = 2;
req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
goto exit;
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
+ printk(KERN_ERR "Failed to set CnfOwnSSID\n");
goto failed;
}
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
+ printk(KERN_ERR "Failed to set CnfDesiredSSID\n");
goto failed;
}
word = msg->beaconperiod.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNint, word);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
+ printk(KERN_ERR "Failed to set beacon period=%d.\n", word);
goto failed;
}
word = msg->dschannel.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
+ printk(KERN_ERR "Failed to set channel=%d.\n", word);
goto failed;
}
/* Basic rates */
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
+ printk(KERN_ERR "Failed to set basicrates=%d.\n", word);
goto failed;
}
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
+ printk(KERN_ERR "Failed to set supprates=%d.\n", word);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
+ printk(KERN_ERR "Failed to set txrates=%d.\n", word);
goto failed;
}
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+ printk(KERN_ERR "Enable macport failed, result=%d.\n", result);
goto failed;
}
* state.
*/
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"PDA may only be read "
"in the fwload state.\n");
msg->resultcode.data =
msg->pda.data,
HFA384x_PDA_LEN_MAX);
if (result) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"hfa384x_drvr_readpda() failed, "
"result=%d\n",
result);
p80211msg_p2req_ramdl_state_t *msg = msgp;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"ramdl_state(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
u8 *buf;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"ramdl_write(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
p80211msg_p2req_flashdl_state_t *msg = msgp;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"flashdl_state(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
wlandev->msdstate = WLAN_MSD_HWPRESENT;
result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
if (result != P80211ENUM_resultcode_success) {
- WLAN_LOG_ERROR("prism2sta_ifstate(fwload) failed,"
+ printk(KERN_ERR "prism2sta_ifstate(fwload) failed,"
"P80211ENUM_resultcode=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
u8 *buf;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"flashdl_write(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
break;
}
default:
- WLAN_LOG_ERROR("Unhandled DID 0x%08x\n", mib->did);
+ printk(KERN_ERR "Unhandled DID 0x%08x\n", mib->did);
}
return(0);
* for firmware loading.
*/
if ((result=hfa384x_drvr_start(hw))) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"hfa384x_drvr_start() failed,"
"result=%d\n", (int)result);
result =
* of the hardware or a previous firmware load.
*/
if ((result=hfa384x_drvr_start(hw))) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"hfa384x_drvr_start() failed,"
"result=%d\n", (int)result);
result =
}
if ((result=prism2sta_getcardinfo(wlandev))) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"prism2sta_getcardinfo() failed,"
"result=%d\n", (int)result);
result =
break;
}
if ((result=prism2sta_globalsetup(wlandev))) {
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"prism2sta_globalsetup() failed,"
"result=%d\n", (int)result);
result =
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_NICIDENTITY,
&hw->ident_nic, sizeof(hfa384x_compident_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve NICIDENTITY\n");
+ printk(KERN_ERR "Failed to retrieve NICIDENTITY\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRIIDENTITY,
&hw->ident_pri_fw, sizeof(hfa384x_compident_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve PRIIDENTITY\n");
+ printk(KERN_ERR "Failed to retrieve PRIIDENTITY\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STAIDENTITY,
&hw->ident_sta_fw, sizeof(hfa384x_compident_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve STAIDENTITY\n");
+ printk(KERN_ERR "Failed to retrieve STAIDENTITY\n");
goto failed;
}
if (hw->ident_nic.id < 0x8000) {
- WLAN_LOG_ERROR("FATAL: Card is not an Intersil Prism2/2.5/3\n");
+ printk(KERN_ERR "FATAL: Card is not an Intersil Prism2/2.5/3\n");
result = -1;
goto failed;
}
"ident: ap f/w: id=0x%02x %d.%d.%d\n",
hw->ident_sta_fw.id, hw->ident_sta_fw.major,
hw->ident_sta_fw.minor, hw->ident_sta_fw.variant);
- WLAN_LOG_ERROR("Unsupported Tertiary AP firmeare loaded!\n");
+ printk(KERN_ERR "Unsupported Tertiary AP firmeare loaded!\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_MFISUPRANGE,
&hw->cap_sup_mfi, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve MFISUPRANGE\n");
+ printk(KERN_ERR "Failed to retrieve MFISUPRANGE\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CFISUPRANGE,
&hw->cap_sup_cfi, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve CFISUPRANGE\n");
+ printk(KERN_ERR "Failed to retrieve CFISUPRANGE\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRISUPRANGE,
&hw->cap_sup_pri, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve PRISUPRANGE\n");
+ printk(KERN_ERR "Failed to retrieve PRISUPRANGE\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STASUPRANGE,
&hw->cap_sup_sta, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve STASUPRANGE\n");
+ printk(KERN_ERR "Failed to retrieve STASUPRANGE\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_PRI_CFIACTRANGES,
&hw->cap_act_pri_cfi, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve PRI_CFIACTRANGES\n");
+ printk(KERN_ERR "Failed to retrieve PRI_CFIACTRANGES\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_CFIACTRANGES,
&hw->cap_act_sta_cfi, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve STA_CFIACTRANGES\n");
+ printk(KERN_ERR "Failed to retrieve STA_CFIACTRANGES\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_STA_MFIACTRANGES,
&hw->cap_act_sta_mfi, sizeof(hfa384x_caplevel_t));
if ( result ) {
- WLAN_LOG_ERROR("Failed to retrieve STA_MFIACTRANGES\n");
+ printk(KERN_ERR "Failed to retrieve STA_MFIACTRANGES\n");
goto failed;
}
pstr, sizeof(pstr));
printk(KERN_INFO "Prism2 card SN: %s\n", pstr);
} else {
- WLAN_LOG_ERROR("Failed to retrieve Prism2 Card SN\n");
+ printk(KERN_ERR "Failed to retrieve Prism2 Card SN\n");
goto failed;
}
result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFOWNMACADDR,
wlandev->netdev->dev_addr, ETH_ALEN);
if ( result != 0 ) {
- WLAN_LOG_ERROR("Failed to retrieve mac address\n");
+ printk(KERN_ERR "Failed to retrieve mac address\n");
goto failed;
}
goto done;
failed:
- WLAN_LOG_ERROR("Failed, result=%d\n", result);
+ printk(KERN_ERR "Failed, result=%d\n", result);
done:
return result;
}
HFA384x_RID_JOINREQUEST,
&joinreq, HFA384x_RID_JOINREQUEST_LEN);
if (result) {
- WLAN_LOG_ERROR("setconfig(joinreq) failed, result=%d\n", result);
+ printk(KERN_ERR "setconfig(joinreq) failed, result=%d\n", result);
}
return;
&rec, sizeof(rec));
if (result) {
if (added) hw->authlist.cnt--;
- WLAN_LOG_ERROR("setconfig(authenticatestation) failed, result=%d\n", result);
+ printk(KERN_ERR "setconfig(authenticatestation) failed, result=%d\n", result);
}
return;
}
hw = kmalloc(sizeof(hfa384x_t), GFP_KERNEL);
if (!wlandev || !hw) {
- WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+ printk(KERN_ERR "%s: Memory allocation failure.\n", dev_info);
if (wlandev) kfree(wlandev);
if (hw) kfree(hw);
return NULL;
HFA384x_RID_DBMCOMMSQUALITY_LEN);
if (result) {
- WLAN_LOG_ERROR("error fetching commsqual\n");
+ printk(KERN_ERR "error fetching commsqual\n");
goto done;
}
dev = interface_to_usbdev(interface);
if ((wlandev = create_wlan()) == NULL) {
- WLAN_LOG_ERROR("%s: Memory allocation failure.\n", dev_info);
+ printk(KERN_ERR "%s: Memory allocation failure.\n", dev_info);
result = -EIO;
goto failed;
}
hw = wlandev->priv;
if ( wlan_setup(wlandev) != 0 ) {
- WLAN_LOG_ERROR("%s: wlan_setup() failed.\n", dev_info);
+ printk(KERN_ERR "%s: wlan_setup() failed.\n", dev_info);
result = -EIO;
goto failed;
}
unregister_wlandev(wlandev);
hfa384x_destroy(hw);
result = -EIO;
- WLAN_LOG_ERROR(
+ printk(KERN_ERR
"%s: hfa384x_corereset() failed.\n",
dev_info);
goto failed;
wlandev->msdstate = WLAN_MSD_HWPRESENT;
if ( register_wlandev(wlandev) != 0 ) {
- WLAN_LOG_ERROR("%s: register_wlandev() failed.\n", dev_info);
+ printk(KERN_ERR "%s: register_wlandev() failed.\n", dev_info);
result = -EIO;
goto failed;
}
#include <linux/hardirq.h>
-#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __func__ , ##args);
-
#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __func__ , ##args);
#if defined(WLAN_INCLUDE_DEBUG)
OSDN Git Service
