ARM: dts: lpc4357-ea4357: fix unit name warnings from dtc

Fix the following warnings from dtc by either adding or removing
the unit name from the node.

Warning (unit_address_vs_reg): Node /soc/flash-controller@40003000/flash@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_joystick/button@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_joystick/button@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_joystick/button@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_joystick/button@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_joystick/button@4 has a unit name, but no reg property

Signed-off-by: Joachim Eastwood <manabian@gmail.com>

diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index a211b6e..1919be4 100644 (file)
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -62,31 +62,31 @@
                poll-interval = <100>;
                autorepeat;
 
-               button@0 {
+               button0 {
                        label = "joy_enter";
                        linux,code = <KEY_ENTER>;
                        gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
                };
 
-               button@1 {
+               button1 {
                        label = "joy_left";
                        linux,code = <KEY_LEFT>;
                        gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
                };
 
-               button@2 {
+               button2 {
                        label = "joy_up";
                        linux,code = <KEY_UP>;
                        gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
                };
 
-               button@3 {
+               button3 {
                        label = "joy_right";
                        linux,code = <KEY_RIGHT>;
                        gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
                };
 
-               button@4 {
+               button4 {
                        label = "joy_down";
                        linux,code = <KEY_DOWN>;
                        gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
@@ -584,7 +584,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&spifi_pins>;
 
-       flash@0 {
+       flash {
                compatible = "jedec,spi-nor";
                spi-cpol;
                spi-cpha;