arm64: dts: imx8mm-evk: enable usb1 and typec support

USB1 port has typec connector with power delivery support:
- Dual data role: host and device.
- Dual power role: source and sink, prefer power sink.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index ee7f2b2..fcfee8b 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -115,6 +116,21 @@
        status = "okay";
 };
 
+&usbotg1 {
+       dr_mode = "otg";
+       hnp-disable;
+       srp-disable;
+       adp-disable;
+       usb-role-switch;
+       status = "okay";
+
+       port {
+               usb1_drd_sw: endpoint {
+                       remote-endpoint = <&typec1_dr_sw>;
+               };
+       };
+};
+
 &usdhc2 {
        pinctrl-names = "default", "state_100mhz", "state_200mhz";
        pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -257,6 +273,42 @@
        };
 };
 
+&i2c2 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       status = "okay";
+
+       ptn5110: tcpc@50 {
+               compatible = "nxp,ptn5110";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_typec1>;
+               reg = <0x50>;
+               interrupt-parent = <&gpio2>;
+               interrupts = <11 8>;
+               status = "okay";
+
+               port {
+                       typec1_dr_sw: endpoint {
+                               remote-endpoint = <&usb1_drd_sw>;
+                       };
+               };
+
+               typec1_con: connector {
+                       compatible = "usb-c-connector";
+                       label = "USB-C";
+                       power-role = "dual";
+                       data-role = "dual";
+                       try-power-role = "sink";
+                       source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+                       sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+                                    PDO_VAR(5000, 20000, 3000)>;
+                       op-sink-microwatt = <15000000>;
+                       self-powered;
+               };
+       };
+};
+
 &iomuxc {
        pinctrl-names = "default";
 
@@ -299,6 +351,13 @@
                >;
        };
 
+       pinctrl_i2c2: i2c2grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL                  0x400001c3
+                       MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA                  0x400001c3
+               >;
+       };
+
        pinctrl_pmic: pmicirq {
                fsl,pins = <
                        MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3               0x41
@@ -320,6 +379,12 @@
                >;
        };
 
+       pinctrl_typec1: typec1grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x159
+               >;
+       };
+
        pinctrl_uart2: uart2grp {
                fsl,pins = <
                        MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140