F: hw/s390x/ipl.*
F: pc-bios/s390-ccw/
F: pc-bios/s390-ccw.img
+F: docs/devel/s390-dasd-ipl.txt
T: git https://github.com/borntraeger/qemu.git s390-next
L: qemu-s390x@nongnu.org
--- /dev/null
+*****************************
+***** s390 hardware IPL *****
+*****************************
+
+The s390 hardware IPL process consists of the following steps.
+
+1. A READ IPL ccw is constructed in memory location 0x0.
+ This ccw, by definition, reads the IPL1 record which is located on the disk
+ at cylinder 0 track 0 record 1. Note that the chain flag is on in this ccw
+ so when it is complete another ccw will be fetched and executed from memory
+ location 0x08.
+
+2. Execute the Read IPL ccw at 0x00, thereby reading IPL1 data into 0x00.
+ IPL1 data is 24 bytes in length and consists of the following pieces of
+ information: [psw][read ccw][tic ccw]. When the machine executes the Read
+ IPL ccw it read the 24-bytes of IPL1 to be read into memory starting at
+ location 0x0. Then the ccw program at 0x08 which consists of a read
+ ccw and a tic ccw is automatically executed because of the chain flag from
+ the original READ IPL ccw. The read ccw will read the IPL2 data into memory
+ and the TIC (Transfer In Channel) will transfer control to the channel
+ program contained in the IPL2 data. The TIC channel command is the
+ equivalent of a branch/jump/goto instruction for channel programs.
+ NOTE: The ccws in IPL1 are defined by the architecture to be format 0.
+
+3. Execute IPL2.
+ The TIC ccw instruction at the end of the IPL1 channel program will begin
+ the execution of the IPL2 channel program. IPL2 is stage-2 of the boot
+ process and will contain a larger channel program than IPL1. The point of
+ IPL2 is to find and load either the operating system or a small program that
+ loads the operating system from disk. At the end of this step all or some of
+ the real operating system is loaded into memory and we are ready to hand
+ control over to the guest operating system. At this point the guest
+ operating system is entirely responsible for loading any more data it might
+ need to function. NOTE: The IPL2 channel program might read data into memory
+ location 0 thereby overwriting the IPL1 psw and channel program. This is ok
+ as long as the data placed in location 0 contains a psw whose instruction
+ address points to the guest operating system code to execute at the end of
+ the IPL/boot process.
+ NOTE: The ccws in IPL2 are defined by the architecture to be format 0.
+
+4. Start executing the guest operating system.
+ The psw that was loaded into memory location 0 as part of the ipl process
+ should contain the needed flags for the operating system we have loaded. The
+ psw's instruction address will point to the location in memory where we want
+ to start executing the operating system. This psw is loaded (via LPSW
+ instruction) causing control to be passed to the operating system code.
+
+In a non-virtualized environment this process, handled entirely by the hardware,
+is kicked off by the user initiating a "Load" procedure from the hardware
+management console. This "Load" procedure crafts a special "Read IPL" ccw in
+memory location 0x0 that reads IPL1. It then executes this ccw thereby kicking
+off the reading of IPL1 data. Since the channel program from IPL1 will be
+written immediately after the special "Read IPL" ccw, the IPL1 channel program
+will be executed immediately (the special read ccw has the chaining bit turned
+on). The TIC at the end of the IPL1 channel program will cause the IPL2 channel
+program to be executed automatically. After this sequence completes the "Load"
+procedure then loads the psw from 0x0.
+
+**********************************************************
+***** How this all pertains to QEMU (and the kernel) *****
+**********************************************************
+
+In theory we should merely have to do the following to IPL/boot a guest
+operating system from a DASD device:
+
+1. Place a "Read IPL" ccw into memory location 0x0 with chaining bit on.
+2. Execute channel program at 0x0.
+3. LPSW 0x0.
+
+However, our emulation of the machine's channel program logic within the kernel
+is missing one key feature that is required for this process to work:
+non-prefetch of ccw data.
+
+When we start a channel program we pass the channel subsystem parameters via an
+ORB (Operation Request Block). One of those parameters is a prefetch bit. If the
+bit is on then the vfio-ccw kernel driver is allowed to read the entire channel
+program from guest memory before it starts executing it. This means that any
+channel commands that read additional channel commands will not work as expected
+because the newly read commands will only exist in guest memory and NOT within
+the kernel's channel subsystem memory. The kernel vfio-ccw driver currently
+requires this bit to be on for all channel programs. This is a problem because
+the IPL process consists of transferring control from the "Read IPL" ccw
+immediately to the IPL1 channel program that was read by "Read IPL".
+
+Not being able to turn off prefetch will also prevent the TIC at the end of the
+IPL1 channel program from transferring control to the IPL2 channel program.
+
+Lastly, in some cases (the zipl bootloader for example) the IPL2 program also
+transfers control to another channel program segment immediately after reading
+it from the disk. So we need to be able to handle this case.
+
+**************************
+***** What QEMU does *****
+**************************
+
+Since we are forced to live with prefetch we cannot use the very simple IPL
+procedure we defined in the preceding section. So we compensate by doing the
+following.
+
+1. Place "Read IPL" ccw into memory location 0x0, but turn off chaining bit.
+2. Execute "Read IPL" at 0x0.
+
+ So now IPL1's psw is at 0x0 and IPL1's channel program is at 0x08.
+
+4. Write a custom channel program that will seek to the IPL2 record and then
+ execute the READ and TIC ccws from IPL1. Normally the seek is not required
+ because after reading the IPL1 record the disk is automatically positioned
+ to read the very next record which will be IPL2. But since we are not reading
+ both IPL1 and IPL2 as part of the same channel program we must manually set
+ the position.
+
+5. Grab the target address of the TIC instruction from the IPL1 channel program.
+ This address is where the IPL2 channel program starts.
+
+ Now IPL2 is loaded into memory somewhere, and we know the address.
+
+6. Execute the IPL2 channel program at the address obtained in step #5.
+
+ Because this channel program can be dynamic, we must use a special algorithm
+ that detects a READ immediately followed by a TIC and breaks the ccw chain
+ by turning off the chain bit in the READ ccw. When control is returned from
+ the kernel/hardware to the QEMU bios code we immediately issue another start
+ subchannel to execute the remaining TIC instruction. This causes the entire
+ channel program (starting from the TIC) and all needed data to be refetched
+ thereby stepping around the limitation that would otherwise prevent this
+ channel program from executing properly.
+
+ Now the operating system code is loaded somewhere in guest memory and the psw
+ in memory location 0x0 will point to entry code for the guest operating
+ system.
+
+7. LPSW 0x0.
+ LPSW transfers control to the guest operating system and we're done.
.PHONY : all clean build-all
OBJECTS = start.o main.o bootmap.o jump2ipl.o sclp.o menu.o \
- virtio.o virtio-scsi.o virtio-blkdev.o libc.o cio.o
+ virtio.o virtio-scsi.o virtio-blkdev.o libc.o cio.o dasd-ipl.o
QEMU_CFLAGS := $(filter -W%, $(QEMU_CFLAGS))
QEMU_CFLAGS += -ffreestanding -fno-delete-null-pointer-checks -msoft-float
--- /dev/null
+/*
+ * S390 IPL (boot) from a real DASD device via vfio framework.
+ *
+ * Copyright (c) 2019 Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#include "libc.h"
+#include "s390-ccw.h"
+#include "s390-arch.h"
+#include "dasd-ipl.h"
+#include "helper.h"
+
+static char prefix_page[PAGE_SIZE * 2]
+ __attribute__((__aligned__(PAGE_SIZE * 2)));
+
+static void enable_prefixing(void)
+{
+ memcpy(&prefix_page, lowcore, 4096);
+ set_prefix(ptr2u32(&prefix_page));
+}
+
+static void disable_prefixing(void)
+{
+ set_prefix(0);
+ /* Copy io interrupt info back to low core */
+ memcpy((void *)&lowcore->subchannel_id, prefix_page + 0xB8, 12);
+}
+
+static bool is_read_tic_ccw_chain(Ccw0 *ccw)
+{
+ Ccw0 *next_ccw = ccw + 1;
+
+ return ((ccw->cmd_code == CCW_CMD_DASD_READ ||
+ ccw->cmd_code == CCW_CMD_DASD_READ_MT) &&
+ ccw->chain && next_ccw->cmd_code == CCW_CMD_TIC);
+}
+
+static bool dynamic_cp_fixup(uint32_t ccw_addr, uint32_t *next_cpa)
+{
+ Ccw0 *cur_ccw = (Ccw0 *)(uint64_t)ccw_addr;
+ Ccw0 *tic_ccw;
+
+ while (true) {
+ /* Skip over inline TIC (it might not have the chain bit on) */
+ if (cur_ccw->cmd_code == CCW_CMD_TIC &&
+ cur_ccw->cda == ptr2u32(cur_ccw) - 8) {
+ cur_ccw += 1;
+ continue;
+ }
+
+ if (!cur_ccw->chain) {
+ break;
+ }
+ if (is_read_tic_ccw_chain(cur_ccw)) {
+ /*
+ * Breaking a chain of CCWs may alter the semantics or even the
+ * validity of a channel program. The heuristic implemented below
+ * seems to work well in practice for the channel programs
+ * generated by zipl.
+ */
+ tic_ccw = cur_ccw + 1;
+ *next_cpa = tic_ccw->cda;
+ cur_ccw->chain = 0;
+ return true;
+ }
+ cur_ccw += 1;
+ }
+ return false;
+}
+
+static int run_dynamic_ccw_program(SubChannelId schid, uint16_t cutype,
+ uint32_t cpa)
+{
+ bool has_next;
+ uint32_t next_cpa = 0;
+ int rc;
+
+ do {
+ has_next = dynamic_cp_fixup(cpa, &next_cpa);
+
+ print_int("executing ccw chain at ", cpa);
+ enable_prefixing();
+ rc = do_cio(schid, cutype, cpa, CCW_FMT0);
+ disable_prefixing();
+
+ if (rc) {
+ break;
+ }
+ cpa = next_cpa;
+ } while (has_next);
+
+ return rc;
+}
+
+static void make_readipl(void)
+{
+ Ccw0 *ccwIplRead = (Ccw0 *)0x00;
+
+ /* Create Read IPL ccw at address 0 */
+ ccwIplRead->cmd_code = CCW_CMD_READ_IPL;
+ ccwIplRead->cda = 0x00; /* Read into address 0x00 in main memory */
+ ccwIplRead->chain = 0; /* Chain flag */
+ ccwIplRead->count = 0x18; /* Read 0x18 bytes of data */
+}
+
+static void run_readipl(SubChannelId schid, uint16_t cutype)
+{
+ if (do_cio(schid, cutype, 0x00, CCW_FMT0)) {
+ panic("dasd-ipl: Failed to run Read IPL channel program\n");
+ }
+}
+
+/*
+ * The architecture states that IPL1 data should consist of a psw followed by
+ * format-0 READ and TIC CCWs. Let's sanity check.
+ */
+static void check_ipl1(void)
+{
+ Ccw0 *ccwread = (Ccw0 *)0x08;
+ Ccw0 *ccwtic = (Ccw0 *)0x10;
+
+ if (ccwread->cmd_code != CCW_CMD_DASD_READ ||
+ ccwtic->cmd_code != CCW_CMD_TIC) {
+ panic("dasd-ipl: IPL1 data invalid. Is this disk really bootable?\n");
+ }
+}
+
+static void check_ipl2(uint32_t ipl2_addr)
+{
+ Ccw0 *ccw = u32toptr(ipl2_addr);
+
+ if (ipl2_addr == 0x00) {
+ panic("IPL2 address invalid. Is this disk really bootable?\n");
+ }
+ if (ccw->cmd_code == 0x00) {
+ panic("IPL2 ccw data invalid. Is this disk really bootable?\n");
+ }
+}
+
+static uint32_t read_ipl2_addr(void)
+{
+ Ccw0 *ccwtic = (Ccw0 *)0x10;
+
+ return ccwtic->cda;
+}
+
+static void ipl1_fixup(void)
+{
+ Ccw0 *ccwSeek = (Ccw0 *) 0x08;
+ Ccw0 *ccwSearchID = (Ccw0 *) 0x10;
+ Ccw0 *ccwSearchTic = (Ccw0 *) 0x18;
+ Ccw0 *ccwRead = (Ccw0 *) 0x20;
+ CcwSeekData *seekData = (CcwSeekData *) 0x30;
+ CcwSearchIdData *searchData = (CcwSearchIdData *) 0x38;
+
+ /* move IPL1 CCWs to make room for CCWs needed to locate record 2 */
+ memcpy(ccwRead, (void *)0x08, 16);
+
+ /* Disable chaining so we don't TIC to IPL2 channel program */
+ ccwRead->chain = 0x00;
+
+ ccwSeek->cmd_code = CCW_CMD_DASD_SEEK;
+ ccwSeek->cda = ptr2u32(seekData);
+ ccwSeek->chain = 1;
+ ccwSeek->count = sizeof(*seekData);
+ seekData->reserved = 0x00;
+ seekData->cyl = 0x00;
+ seekData->head = 0x00;
+
+ ccwSearchID->cmd_code = CCW_CMD_DASD_SEARCH_ID_EQ;
+ ccwSearchID->cda = ptr2u32(searchData);
+ ccwSearchID->chain = 1;
+ ccwSearchID->count = sizeof(*searchData);
+ searchData->cyl = 0;
+ searchData->head = 0;
+ searchData->record = 2;
+
+ /* Go back to Search CCW if correct record not yet found */
+ ccwSearchTic->cmd_code = CCW_CMD_TIC;
+ ccwSearchTic->cda = ptr2u32(ccwSearchID);
+}
+
+static void run_ipl1(SubChannelId schid, uint16_t cutype)
+ {
+ uint32_t startAddr = 0x08;
+
+ if (do_cio(schid, cutype, startAddr, CCW_FMT0)) {
+ panic("dasd-ipl: Failed to run IPL1 channel program\n");
+ }
+}
+
+static void run_ipl2(SubChannelId schid, uint16_t cutype, uint32_t addr)
+{
+ if (run_dynamic_ccw_program(schid, cutype, addr)) {
+ panic("dasd-ipl: Failed to run IPL2 channel program\n");
+ }
+}
+
+/*
+ * Limitations in vfio-ccw support complicate the IPL process. Details can
+ * be found in docs/devel/s390-dasd-ipl.txt
+ */
+void dasd_ipl(SubChannelId schid, uint16_t cutype)
+{
+ PSWLegacy *pswl = (PSWLegacy *) 0x00;
+ uint32_t ipl2_addr;
+
+ /* Construct Read IPL CCW and run it to read IPL1 from boot disk */
+ make_readipl();
+ run_readipl(schid, cutype);
+ ipl2_addr = read_ipl2_addr();
+ check_ipl1();
+
+ /*
+ * Fixup IPL1 channel program to account for vfio-ccw limitations, then run
+ * it to read IPL2 channel program from boot disk.
+ */
+ ipl1_fixup();
+ run_ipl1(schid, cutype);
+ check_ipl2(ipl2_addr);
+
+ /*
+ * Run IPL2 channel program to read operating system code from boot disk
+ */
+ run_ipl2(schid, cutype, ipl2_addr);
+
+ /* Transfer control to the guest operating system */
+ pswl->mask |= PSW_MASK_EAMODE; /* Force z-mode */
+ pswl->addr |= PSW_MASK_BAMODE; /* ... */
+ jump_to_low_kernel();
+}
--- /dev/null
+/*
+ * S390 IPL (boot) from a real DASD device via vfio framework.
+ *
+ * Copyright (c) 2019 Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef DASD_IPL_H
+#define DASD_IPL_H
+
+void dasd_ipl(SubChannelId schid, uint16_t cutype);
+
+#endif /* DASD_IPL_H */
#include "s390-ccw.h"
#include "cio.h"
#include "virtio.h"
+#include "dasd-ipl.h"
char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
static SubChannelId blk_schid = { .one = 1 };
cutype = cu_type(blk_schid);
switch (cutype) {
+ case CU_TYPE_DASD_3990:
+ case CU_TYPE_DASD_2107:
+ dasd_ipl(blk_schid, cutype); /* no return */
+ break;
case CU_TYPE_VIRTIO:
virtio_setup();
zipl_load(); /* no return */
extern LowCore const *lowcore;
+static inline void set_prefix(uint32_t address)
+{
+ asm volatile("spx %0" : : "m" (address) : "memory");
+}
+
+static inline uint32_t store_prefix(void)
+{
+ uint32_t address;
+
+ asm volatile("stpx %0" : "=m" (address));
+ return address;
+}
+
#endif