arm64: dts: qcom: sm6350: Add ADSP nodes

Add the required nodes for booting the ADSP on sm6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-6-luca.weiss@fairphone.com

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index b0d70ea..fdd7d3b 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -361,6 +361,30 @@
                hwlocks = <&tcsr_mutex 3>;
        };
 
+       smp2p-adsp {
+               compatible = "qcom,smp2p";
+               qcom,smem = <443>, <429>;
+               interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                            IPCC_MPROC_SIGNAL_SMP2P
+                                            IRQ_TYPE_EDGE_RISING>;
+               mboxes = <&ipcc IPCC_CLIENT_LPASS
+                               IPCC_MPROC_SIGNAL_SMP2P>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <2>;
+
+               smp2p_adsp_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               smp2p_adsp_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
        smp2p-mpss {
                compatible = "qcom,smp2p";
                qcom,smem = <435>, <428>;
@@ -499,6 +523,73 @@
                        #hwlock-cells = <1>;
                };
 
+               adsp: remoteproc@3000000 {
+                       compatible = "qcom,sm6350-adsp-pas";
+                       reg = <0 0x03000000 0 0x100>;
+
+                       interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmhpd SM6350_LCX>,
+                                       <&rpmhpd SM6350_LMX>;
+                       power-domain-names = "lcx", "lmx";
+
+                       memory-region = <&pil_adsp_mem>;
+
+                       qcom,qmp = <&aoss_qmp>;
+
+                       qcom,smem-states = <&smp2p_adsp_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_LPASS
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "lpass";
+                               qcom,remote-pid = <2>;
+
+                               fastrpc {
+                                       compatible = "qcom,fastrpc";
+                                       qcom,glink-channels = "fastrpcglink-apps-dsp";
+                                       label = "adsp";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       compute-cb@3 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <3>;
+                                               iommus = <&apps_smmu 0x1003 0x0>;
+                                       };
+
+                                       compute-cb@4 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <4>;
+                                               iommus = <&apps_smmu 0x1004 0x0>;
+                                       };
+
+                                       compute-cb@5 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <5>;
+                                               iommus = <&apps_smmu 0x1005 0x0>;
+                                               qcom,nsessions = <5>;
+                                       };
+                               };
+                       };
+               };
+
                mpss: remoteproc@4080000 {
                        compatible = "qcom,sm6350-mpss-pas";
                        reg = <0x0 0x04080000 0x0 0x4040>;