return ret;
}
+static const struct nand_controller_ops ams_delta_ops = {
+ .exec_op = ams_delta_exec_op,
+};
+
/*
* Main initialization routine
*/
priv->io_base = io_base;
nand_set_controller_data(this, priv);
- this->exec_op = ams_delta_exec_op;
-
priv->gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
if (IS_ERR(priv->gpiod_rdy)) {
err = PTR_ERR(priv->gpiod_rdy);
ams_delta_dir_input(priv, true);
/* Initialize the NAND controller object embedded in ams_delta_nand. */
+ priv->base.ops = &ams_delta_ops;
nand_controller_init(&priv->base);
this->controller = &priv->base;
static const struct nand_controller_ops fsmc_nand_controller_ops = {
.attach_chip = fsmc_nand_attach_chip,
+ .exec_op = fsmc_exec_op,
};
/*
nand_set_flash_node(nand, pdev->dev.of_node);
mtd->dev.parent = &pdev->dev;
- nand->exec_op = fsmc_exec_op;
/*
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
void panic_nand_wait(struct nand_chip *chip, unsigned long timeo);
void sanitize_string(uint8_t *s, size_t len);
+static inline bool nand_has_exec_op(struct nand_chip *chip)
+{
+ if (!chip->controller || !chip->controller->ops ||
+ !chip->controller->ops->exec_op)
+ return false;
+
+ return true;
+}
+
static inline int nand_exec_op(struct nand_chip *chip,
const struct nand_operation *op)
{
- if (!chip->exec_op)
+ if (!nand_has_exec_op(chip))
return -ENOTSUPP;
if (WARN_ON(op->cs >= chip->numchips))
return -EINVAL;
- return chip->exec_op(chip, op, false);
+ return chip->controller->ops->exec_op(chip, op, false);
}
/* BBT functions */
static const struct nand_controller_ops marvell_nand_controller_ops = {
.attach_chip = marvell_nand_attach_chip,
+ .exec_op = marvell_nfc_exec_op,
};
static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
- chip->exec_op = marvell_nfc_exec_op;
if (!of_property_read_bool(np, "marvell,nand-keep-config"))
chip->setup_data_interface = marvell_nfc_setup_data_interface;
u8 status = 0;
int ret;
- if (!chip->exec_op)
+ if (!nand_has_exec_op(chip))
return -ENOTSUPP;
/* Wait tWB before polling the STATUS reg. */
if (offset_in_page + len > mtd->writesize + mtd->oobsize)
return -EINVAL;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
if (mtd->writesize > 512)
return nand_lp_exec_read_page_op(chip, page,
offset_in_page, buf,
if (len && !buf)
return -EINVAL;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
if (mtd->writesize <= 512)
return -ENOTSUPP;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
u8 addrs[2] = {};
if (offset_in_oob + len > mtd->oobsize)
return -EINVAL;
- if (chip->exec_op)
+ if (nand_has_exec_op(chip))
return nand_read_page_op(chip, page,
mtd->writesize + offset_in_oob,
buf, len);
if (offset_in_page + len > mtd->writesize + mtd->oobsize)
return -EINVAL;
- if (chip->exec_op)
+ if (nand_has_exec_op(chip))
return nand_exec_prog_page_op(chip, page, offset_in_page, buf,
len, false);
int ret;
u8 status;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
if (offset_in_page + len > mtd->writesize + mtd->oobsize)
return -EINVAL;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
status = nand_exec_prog_page_op(chip, page, offset_in_page, buf,
len, true);
} else {
if (mtd->writesize <= 512)
return -ENOTSUPP;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
u8 addrs[2];
if (len && !buf)
return -EINVAL;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
*/
int nand_status_op(struct nand_chip *chip, u8 *status)
{
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
*/
int nand_exit_status_op(struct nand_chip *chip)
{
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_READ0, 0),
};
int ret;
u8 status;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
u8 addrs[3] = { page, page >> 8, page >> 16 };
const u8 *params = data;
int i, ret;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
u8 *params = data;
int i;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
static int nand_wait_rdy_op(struct nand_chip *chip, unsigned int timeout_ms,
unsigned int delay_ns)
{
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
struct nand_op_instr instrs[] = {
NAND_OP_WAIT_RDY(PSEC_TO_MSEC(timeout_ms),
PSEC_TO_NSEC(delay_ns)),
*/
int nand_reset_op(struct nand_chip *chip)
{
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
nand_get_sdr_timings(&chip->data_interface);
struct nand_op_instr instrs[] = {
if (!len || !buf)
return -EINVAL;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
struct nand_op_instr instrs[] = {
NAND_OP_DATA_IN(len, buf, 0),
};
if (!len || !buf)
return -EINVAL;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
struct nand_op_instr instrs[] = {
NAND_OP_DATA_OUT(len, buf, 0),
};
/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip)
{
- nand_legacy_set_defaults(chip);
-
+ /* If no controller is provided, use the dummy one. */
if (!chip->controller) {
chip->controller = &chip->dummy_controller;
nand_controller_init(chip->controller);
}
+ nand_legacy_set_defaults(chip);
+
if (!chip->buf_align)
chip->buf_align = 1;
}
if (!mtd->name && mtd->dev.parent)
mtd->name = dev_name(mtd->dev.parent);
- ret = nand_legacy_check_hooks(chip);
- if (ret)
- return ret;
-
/*
* Start with chips->numchips = maxchips to let nand_select_target() do
* its job. chip->numchips will be adjusted after.
/* Set the default functions */
nand_set_defaults(chip);
+ ret = nand_legacy_check_hooks(chip);
+ if (ret)
+ return ret;
+
/* Read the flash type */
ret = nand_detect(chip, table);
if (ret) {
static int hynix_nand_cmd_op(struct nand_chip *chip, u8 cmd)
{
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
struct nand_op_instr instrs[] = {
NAND_OP_CMD(cmd, 0),
};
{
u16 column = ((u16)addr << 8) | addr;
- if (chip->exec_op) {
+ if (nand_has_exec_op(chip)) {
struct nand_op_instr instrs[] = {
NAND_OP_ADDR(1, &addr, 0),
NAND_OP_8BIT_DATA_OUT(1, &val, 0),
{
unsigned int busw = chip->options & NAND_BUSWIDTH_16;
- if (chip->exec_op)
+ if (nand_has_exec_op(chip))
return;
/* check for proper chip_delay setup, set 20us if not */
* ->legacy.cmdfunc() is legacy and will only be used if ->exec_op() is
* not populated.
*/
- if (chip->exec_op)
+ if (nand_has_exec_op(chip))
return 0;
/*
static const struct nand_controller_ops tegra_nand_controller_ops = {
.attach_chip = &tegra_nand_attach_chip,
+ .exec_op = tegra_nand_exec_op,
};
static int tegra_nand_chips_init(struct device *dev,
mtd->name = "tegra_nand";
chip->options = NAND_NO_SUBPAGE_WRITE | NAND_USE_BOUNCE_BUFFER;
- chip->exec_op = tegra_nand_exec_op;
chip->setup_data_interface = tegra_nand_setup_data_interface;
ret = nand_scan(chip, 1);
static const struct nand_controller_ops vf610_nfc_controller_ops = {
.attach_chip = vf610_nfc_attach_chip,
+ .exec_op = vf610_nfc_exec_op,
+
};
static int vf610_nfc_probe(struct platform_device *pdev)
goto err_disable_clk;
}
- chip->exec_op = vf610_nfc_exec_op;
-
chip->options |= NAND_NO_SUBPAGE_WRITE;
init_completion(&nfc->cmd_done);
};
/**
- * struct nand_controller_ops - Controller operations
- *
- * @attach_chip: this method is called after the NAND detection phase after
- * flash ID and MTD fields such as erase size, page size and OOB
- * size have been set up. ECC requirements are available if
- * provided by the NAND chip or device tree. Typically used to
- * choose the appropriate ECC configuration and allocate
- * associated resources.
- * This hook is optional.
- * @detach_chip: free all resources allocated/claimed in
- * nand_controller_ops->attach_chip().
- * This hook is optional.
- */
-struct nand_controller_ops {
- int (*attach_chip)(struct nand_chip *chip);
- void (*detach_chip)(struct nand_chip *chip);
-};
-
-/**
- * struct nand_controller - Structure used to describe a NAND controller
- *
- * @lock: protection lock
- * @active: the mtd device which holds the controller currently
- * @wq: wait queue to sleep on if a NAND operation is in
- * progress used instead of the per chip wait queue
- * when a hw controller is available.
- * @ops: NAND controller operations.
- */
-struct nand_controller {
- spinlock_t lock;
- struct nand_chip *active;
- wait_queue_head_t wq;
- const struct nand_controller_ops *ops;
-};
-
-static inline void nand_controller_init(struct nand_controller *nfc)
-{
- nfc->active = NULL;
- spin_lock_init(&nfc->lock);
- init_waitqueue_head(&nfc->wq);
-}
-
-/**
* struct nand_ecc_step_info - ECC step information of ECC engine
* @stepsize: data bytes per ECC step
* @strengths: array of supported strengths
int nand_op_parser_exec_op(struct nand_chip *chip,
const struct nand_op_parser *parser,
const struct nand_operation *op, bool check_only);
+/**
+ * struct nand_controller_ops - Controller operations
+ *
+ * @attach_chip: this method is called after the NAND detection phase after
+ * flash ID and MTD fields such as erase size, page size and OOB
+ * size have been set up. ECC requirements are available if
+ * provided by the NAND chip or device tree. Typically used to
+ * choose the appropriate ECC configuration and allocate
+ * associated resources.
+ * This hook is optional.
+ * @detach_chip: free all resources allocated/claimed in
+ * nand_controller_ops->attach_chip().
+ * This hook is optional.
+ * @exec_op: controller specific method to execute NAND operations.
+ * This method replaces chip->legacy.cmdfunc(),
+ * chip->legacy.{read,write}_{buf,byte,word}(),
+ * chip->legacy.dev_ready() and chip->legacy.waifunc().
+ */
+struct nand_controller_ops {
+ int (*attach_chip)(struct nand_chip *chip);
+ void (*detach_chip)(struct nand_chip *chip);
+ int (*exec_op)(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only);
+};
+
+/**
+ * struct nand_controller - Structure used to describe a NAND controller
+ *
+ * @lock: protection lock
+ * @active: the mtd device which holds the controller currently
+ * @wq: wait queue to sleep on if a NAND operation is in
+ * progress used instead of the per chip wait queue
+ * when a hw controller is available.
+ * @ops: NAND controller operations.
+ */
+struct nand_controller {
+ spinlock_t lock;
+ struct nand_chip *active;
+ wait_queue_head_t wq;
+ const struct nand_controller_ops *ops;
+};
+
+static inline void nand_controller_init(struct nand_controller *nfc)
+{
+ nfc->active = NULL;
+ spin_lock_init(&nfc->lock);
+ init_waitqueue_head(&nfc->wq);
+}
/**
* struct nand_legacy - NAND chip legacy fields/hooks
* you're modifying an existing driver that is using those
* fields/hooks, you should consider reworking the driver
* avoid using them.
- * @exec_op: controller specific method to execute NAND operations.
- * This method replaces ->cmdfunc(),
- * ->legacy.{read,write}_{buf,byte,word}(),
- * ->legacy.dev_ready() and ->waifunc().
* @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for
* setting the read-retry mode. Mostly needed for MLC NAND.
* @ecc: [BOARDSPECIFIC] ECC control structure
struct nand_legacy legacy;
- int (*exec_op)(struct nand_chip *chip,
- const struct nand_operation *op,
- bool check_only);
int (*setup_read_retry)(struct nand_chip *chip, int retry_mode);
int (*setup_data_interface)(struct nand_chip *chip, int chipnr,
const struct nand_data_interface *conf);
OSDN Git Service
