depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
default y
-# This config option automatically enables b43 RFKILL support,
-# if it's possible.
-config B43_RFKILL
- bool
- depends on B43 && (RFKILL = y || RFKILL = B43)
- default y
-
# This config option automatically enables b43 HW-RNG support,
# if the HW-RNG core is enabled.
config B43_HWRNG
b43-y += wa.o
b43-y += dma.o
b43-$(CONFIG_B43_PIO) += pio.o
-b43-$(CONFIG_B43_RFKILL) += rfkill.o
+b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
b43-$(CONFIG_B43_DEBUG) += debugfs.o
char rng_name[30 + 1];
#endif /* CONFIG_B43_HWRNG */
- /* The RF-kill button */
- struct b43_rfkill rfkill;
-
/* List of all wireless devices on this chip */
struct list_head devlist;
u8 nr_devs;
#include "b43.h"
#include "leds.h"
+#include "rfkill.h"
static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
snprintf(name, sizeof(name),
"b43-%s::radio", wiphy_name(hw->wiphy));
b43_register_led(dev, &dev->led_radio, name,
- b43_rfkill_led_name(dev),
+ ieee80211_get_radio_led_name(hw),
led_index, activelow);
- /* Sync the RF-kill LED state with the switch state. */
- if (dev->radio_hw_enable)
+ /* Sync the RF-kill LED state with radio and switch states. */
+ if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_WEIRD:
struct b43_wldev *dev = wl->current_dev;
int did_init = 0;
int err = 0;
- bool do_rfkill_exit = 0;
/* Kill all old instance specific information to make sure
* the card won't use it in the short timeframe between start
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
- /* First register RFkill.
- * LEDs that are registered later depend on it. */
- b43_rfkill_init(dev);
-
mutex_lock(&wl->mutex);
if (b43_status(dev) < B43_STAT_INITIALIZED) {
err = b43_wireless_core_init(dev);
- if (err) {
- do_rfkill_exit = 1;
+ if (err)
goto out_mutex_unlock;
- }
did_init = 1;
}
if (err) {
if (did_init)
b43_wireless_core_exit(dev);
- do_rfkill_exit = 1;
goto out_mutex_unlock;
}
}
+ /* XXX: only do if device doesn't support rfkill irq */
+ wiphy_rfkill_start_polling(hw->wiphy);
+
out_mutex_unlock:
mutex_unlock(&wl->mutex);
- if (do_rfkill_exit)
- b43_rfkill_exit(dev);
-
return err;
}
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
- b43_rfkill_exit(dev);
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
.sta_notify = b43_op_sta_notify,
.sw_scan_start = b43_op_sw_scan_start_notifier,
.sw_scan_complete = b43_op_sw_scan_complete_notifier,
+ .rfkill_poll = b43_rfkill_poll,
};
/* Hard-reset the chip. Do not call this directly.
static void b43_print_driverinfo(void)
{
const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
- *feat_leds = "", *feat_rfkill = "";
+ *feat_leds = "";
#ifdef CONFIG_B43_PCI_AUTOSELECT
feat_pci = "P";
#ifdef CONFIG_B43_LEDS
feat_leds = "L";
#endif
-#ifdef CONFIG_B43_RFKILL
- feat_rfkill = "R";
-#endif
printk(KERN_INFO "Broadcom 43xx driver loaded "
- "[ Features: %s%s%s%s%s, Firmware-ID: "
+ "[ Features: %s%s%s%s, Firmware-ID: "
B43_SUPPORTED_FIRMWARE_ID " ]\n",
feat_pci, feat_pcmcia, feat_nphy,
- feat_leds, feat_rfkill);
+ feat_leds);
}
static int __init b43_init(void)
#ifndef LINUX_B43_PHY_COMMON_H_
#define LINUX_B43_PHY_COMMON_H_
-#include <linux/rfkill.h>
+#include <linux/types.h>
struct b43_wldev;
*/
-#include "rfkill.h"
#include "b43.h"
-#include "phy_common.h"
-
-#include <linux/kmod.h>
/* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
+bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
{
if (dev->phy.rev >= 3) {
if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
}
/* The poll callback for the hardware button. */
-static void b43_rfkill_poll(struct rfkill *rfkill, void *data)
+void b43_rfkill_poll(struct ieee80211_hw *hw)
{
- struct b43_wldev *dev = data;
- struct b43_wl *wl = dev->wl;
+ struct b43_wl *wl = hw_to_b43_wl(hw);
+ struct b43_wldev *dev = wl->current_dev;
+ struct ssb_bus *bus = dev->dev->bus;
bool enabled;
+ bool brought_up = false;
mutex_lock(&wl->mutex);
if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) {
- mutex_unlock(&wl->mutex);
- return;
+ if (ssb_bus_powerup(bus, 0)) {
+ mutex_unlock(&wl->mutex);
+ return;
+ }
+ ssb_device_enable(dev->dev, 0);
+ brought_up = true;
}
+
enabled = b43_is_hw_radio_enabled(dev);
+
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
- enabled = !rfkill_set_hw_state(rfkill, !enabled);
+ wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
if (enabled != dev->phy.radio_on)
b43_software_rfkill(dev, !enabled);
}
- mutex_unlock(&wl->mutex);
-}
-
-/* Called when the RFKILL toggled in software. */
-static int b43_rfkill_soft_set(void *data, bool blocked)
-{
- struct b43_wldev *dev = data;
- struct b43_wl *wl = dev->wl;
- int err = -EINVAL;
-
- if (WARN_ON(!wl->rfkill.registered))
- return -EINVAL;
- mutex_lock(&wl->mutex);
-
- if (b43_status(dev) < B43_STAT_INITIALIZED)
- goto out_unlock;
-
- if (!dev->radio_hw_enable)
- goto out_unlock;
+ if (brought_up) {
+ ssb_device_disable(dev->dev, 0);
+ ssb_bus_may_powerdown(bus);
+ }
- if (!blocked != dev->phy.radio_on)
- b43_software_rfkill(dev, blocked);
- err = 0;
-out_unlock:
mutex_unlock(&wl->mutex);
- return err;
-}
-
-const char *b43_rfkill_led_name(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!rfk->registered)
- return NULL;
- return rfkill_get_led_trigger_name(rfk->rfkill);
-}
-
-static const struct rfkill_ops b43_rfkill_ops = {
- .set_block = b43_rfkill_soft_set,
- .poll = b43_rfkill_poll,
-};
-
-void b43_rfkill_init(struct b43_wldev *dev)
-{
- struct b43_wl *wl = dev->wl;
- struct b43_rfkill *rfk = &(wl->rfkill);
- int err;
-
- rfk->registered = 0;
-
- snprintf(rfk->name, sizeof(rfk->name),
- "b43-%s", wiphy_name(wl->hw->wiphy));
-
- rfk->rfkill = rfkill_alloc(rfk->name,
- dev->dev->dev,
- RFKILL_TYPE_WLAN,
- &b43_rfkill_ops, dev);
- if (!rfk->rfkill)
- goto out_error;
-
- err = rfkill_register(rfk->rfkill);
- if (err)
- goto err_free;
-
- rfk->registered = 1;
-
- return;
- err_free:
- rfkill_destroy(rfk->rfkill);
- out_error:
- rfk->registered = 0;
- b43warn(wl, "RF-kill button init failed\n");
-}
-
-void b43_rfkill_exit(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!rfk->registered)
- return;
- rfk->registered = 0;
-
- rfkill_unregister(rfk->rfkill);
- rfkill_destroy(rfk->rfkill);
- rfk->rfkill = NULL;
}
#ifndef B43_RFKILL_H_
#define B43_RFKILL_H_
+struct ieee80211_hw;
struct b43_wldev;
+void b43_rfkill_poll(struct ieee80211_hw *hw);
-#ifdef CONFIG_B43_RFKILL
-
-#include <linux/rfkill.h>
-
-
-struct b43_rfkill {
- /* The RFKILL subsystem data structure */
- struct rfkill *rfkill;
- /* Did initialization succeed? Used for freeing. */
- bool registered;
- /* The unique name of this rfkill switch */
- char name[sizeof("b43-phy4294967295")];
-};
-
-/* The init function returns void, because we are not interested
- * in failing the b43 init process when rfkill init failed. */
-void b43_rfkill_init(struct b43_wldev *dev);
-void b43_rfkill_exit(struct b43_wldev *dev);
-
-const char *b43_rfkill_led_name(struct b43_wldev *dev);
-
-
-#else /* CONFIG_B43_RFKILL */
-/* No RFKILL support. */
-
-struct b43_rfkill {
- /* empty */
-};
-
-static inline void b43_rfkill_init(struct b43_wldev *dev)
-{
-}
-static inline void b43_rfkill_exit(struct b43_wldev *dev)
-{
-}
-static inline char * b43_rfkill_led_name(struct b43_wldev *dev)
-{
- return NULL;
-}
-
-#endif /* CONFIG_B43_RFKILL */
+bool b43_is_hw_radio_enabled(struct b43_wldev *dev);
#endif /* B43_RFKILL_H_ */
depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY)
default y
-# RFKILL support
-# This config option automatically enables b43legacy RFKILL support,
-# if it's possible.
-config B43LEGACY_RFKILL
- bool
- depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY)
- default y
-
# This config option automatically enables b43 HW-RNG support,
# if the HW-RNG core is enabled.
config B43LEGACY_HWRNG
b43legacy-y += sysfs.o
b43legacy-y += xmit.o
# b43 RFKILL button support
-b43legacy-$(CONFIG_B43LEGACY_RFKILL) += rfkill.o
+b43legacy-y += rfkill.o
# b43legacy LED support
b43legacy-$(CONFIG_B43LEGACY_LEDS) += leds.o
# b43legacy debugging
char rng_name[30 + 1];
#endif
- /* The RF-kill button */
- struct b43legacy_rfkill rfkill;
-
/* List of all wireless devices on this chip */
struct list_head devlist;
u8 nr_devs;
#include "b43legacy.h"
#include "leds.h"
+#include "rfkill.h"
static void b43legacy_led_turn_on(struct b43legacy_wldev *dev, u8 led_index,
snprintf(name, sizeof(name),
"b43legacy-%s::radio", wiphy_name(hw->wiphy));
b43legacy_register_led(dev, &dev->led_radio, name,
- b43legacy_rfkill_led_name(dev),
+ ieee80211_get_radio_led_name(hw),
led_index, activelow);
- /* Sync the RF-kill LED state with the switch state. */
- if (dev->radio_hw_enable)
+ /* Sync the RF-kill LED state with radio and switch states. */
+ if (dev->phy.radio_on && b43legacy_is_hw_radio_enabled(dev))
b43legacy_led_turn_on(dev, led_index, activelow);
break;
case B43legacy_LED_WEIRD:
struct b43legacy_wldev *dev = wl->current_dev;
int did_init = 0;
int err = 0;
- bool do_rfkill_exit = 0;
-
- /* First register RFkill.
- * LEDs that are registered later depend on it. */
- b43legacy_rfkill_init(dev);
/* Kill all old instance specific information to make sure
* the card won't use it in the short timeframe between start
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(dev);
- if (err) {
- do_rfkill_exit = 1;
+ if (err)
goto out_mutex_unlock;
- }
did_init = 1;
}
if (err) {
if (did_init)
b43legacy_wireless_core_exit(dev);
- do_rfkill_exit = 1;
goto out_mutex_unlock;
}
}
+ wiphy_rfkill_start_polling(hw->wiphy);
+
out_mutex_unlock:
mutex_unlock(&wl->mutex);
- if (do_rfkill_exit)
- b43legacy_rfkill_exit(dev);
-
return err;
}
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
- b43legacy_rfkill_exit(dev);
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
.start = b43legacy_op_start,
.stop = b43legacy_op_stop,
.set_tim = b43legacy_op_beacon_set_tim,
+ .rfkill_poll = b43legacy_rfkill_poll,
};
/* Hard-reset the chip. Do not call this directly.
*/
-#include "rfkill.h"
#include "radio.h"
#include "b43legacy.h"
-#include <linux/kmod.h>
-
/* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
+bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
{
if (dev->phy.rev >= 3) {
if (!(b43legacy_read32(dev, B43legacy_MMIO_RADIO_HWENABLED_HI)
}
/* The poll callback for the hardware button. */
-static void b43legacy_rfkill_poll(struct rfkill *rfkill, void *data)
+void b43legacy_rfkill_poll(struct ieee80211_hw *hw)
{
- struct b43legacy_wldev *dev = data;
- struct b43legacy_wl *wl = dev->wl;
+ struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
+ struct b43legacy_wldev *dev = wl->current_dev;
+ struct ssb_bus *bus = dev->dev->bus;
bool enabled;
+ bool brought_up = false;
mutex_lock(&wl->mutex);
if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) {
- mutex_unlock(&wl->mutex);
- return;
+ if (ssb_bus_powerup(bus, 0)) {
+ mutex_unlock(&wl->mutex);
+ return;
+ }
+ ssb_device_enable(dev->dev, 0);
+ brought_up = true;
}
+
enabled = b43legacy_is_hw_radio_enabled(dev);
+
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
b43legacyinfo(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
- enabled = !rfkill_set_hw_state(rfkill, !enabled);
+ wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
if (enabled != dev->phy.radio_on) {
if (enabled)
b43legacy_radio_turn_on(dev);
b43legacy_radio_turn_off(dev, 0);
}
}
- mutex_unlock(&wl->mutex);
-}
-
-/* Called when the RFKILL toggled in software.
- * This is called without locking. */
-static int b43legacy_rfkill_soft_set(void *data, bool blocked)
-{
- struct b43legacy_wldev *dev = data;
- struct b43legacy_wl *wl = dev->wl;
- int ret = -EINVAL;
- if (!wl->rfkill.registered)
- return -EINVAL;
-
- mutex_lock(&wl->mutex);
- if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
- goto out_unlock;
-
- if (!dev->radio_hw_enable)
- goto out_unlock;
-
- if (!blocked != dev->phy.radio_on) {
- if (!blocked)
- b43legacy_radio_turn_on(dev);
- else
- b43legacy_radio_turn_off(dev, 0);
+ if (brought_up) {
+ ssb_device_disable(dev->dev, 0);
+ ssb_bus_may_powerdown(bus);
}
- ret = 0;
-out_unlock:
mutex_unlock(&wl->mutex);
- return ret;
-}
-
-const char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
-{
- struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!rfk->registered)
- return NULL;
- return rfkill_get_led_trigger_name(rfk->rfkill);
}
-
-static const struct rfkill_ops b43legacy_rfkill_ops = {
- .set_block = b43legacy_rfkill_soft_set,
- .poll = b43legacy_rfkill_poll,
-};
-
-void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
-{
- struct b43legacy_wl *wl = dev->wl;
- struct b43legacy_rfkill *rfk = &(wl->rfkill);
- int err;
-
- rfk->registered = 0;
-
- snprintf(rfk->name, sizeof(rfk->name),
- "b43legacy-%s", wiphy_name(wl->hw->wiphy));
- rfk->rfkill = rfkill_alloc(rfk->name,
- dev->dev->dev,
- RFKILL_TYPE_WLAN,
- &b43legacy_rfkill_ops, dev);
- if (!rfk->rfkill)
- goto out_error;
-
- err = rfkill_register(rfk->rfkill);
- if (err)
- goto err_free;
-
- rfk->registered = 1;
-
- return;
- err_free:
- rfkill_destroy(rfk->rfkill);
- out_error:
- rfk->registered = 0;
- b43legacywarn(wl, "RF-kill button init failed\n");
-}
-
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
- struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!rfk->registered)
- return;
- rfk->registered = 0;
-
- rfkill_unregister(rfk->rfkill);
- rfkill_destroy(rfk->rfkill);
- rfk->rfkill = NULL;
-}
-
#ifndef B43legacy_RFKILL_H_
#define B43legacy_RFKILL_H_
+struct ieee80211_hw;
struct b43legacy_wldev;
-#ifdef CONFIG_B43LEGACY_RFKILL
+void b43legacy_rfkill_poll(struct ieee80211_hw *hw);
-#include <linux/rfkill.h>
-
-
-
-struct b43legacy_rfkill {
- /* The RFKILL subsystem data structure */
- struct rfkill *rfkill;
- /* Did initialization succeed? Used for freeing. */
- bool registered;
- /* The unique name of this rfkill switch */
- char name[sizeof("b43legacy-phy4294967295")];
-};
-
-/* The init function returns void, because we are not interested
- * in failing the b43 init process when rfkill init failed. */
-void b43legacy_rfkill_init(struct b43legacy_wldev *dev);
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev);
-
-const char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev);
-
-
-#else /* CONFIG_B43LEGACY_RFKILL */
-/* No RFKILL support. */
-
-struct b43legacy_rfkill {
- /* empty */
-};
-
-static inline void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_free(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
-}
-static inline char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
-{
- return NULL;
-}
-
-#endif /* CONFIG_B43LEGACY_RFKILL */
+bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev);
#endif /* B43legacy_RFKILL_H_ */
OSDN Git Service
