OSDN Git Service

* Makefile.in: Make installation of CYGWIN_LICENSE configurable.
authorcorinna <corinna>
Wed, 30 Aug 2006 13:05:46 +0000 (13:05 +0000)
committercorinna <corinna>
Wed, 30 Aug 2006 13:05:46 +0000 (13:05 +0000)
* aclocal.m4: Regenerate.
* configure.in: Add GCC_NO_EXECUTABLES call. Add configuration for
INSTALL_LICENSE.  Make cygwin subdirectory optional.  Add sanity
check for cygwin resp. mingw subdirectories dependent of the target.
* configure: Regenerate.

winsup/ChangeLog
winsup/Makefile.in
winsup/aclocal.m4
winsup/configure
winsup/configure.in

index 414ebaf..b40115d 100644 (file)
@@ -1,3 +1,12 @@
+2006-08-30  Corinna Vinschen  <corinna@vinschen.de>
+
+       * Makefile.in: Make installation of CYGWIN_LICENSE configurable.
+       * aclocal.m4: Regenerate.
+       * configure.in: Add GCC_NO_EXECUTABLES call. Add configuration for
+       INSTALL_LICENSE.  Make cygwin subdirectory optional.  Add sanity
+       check for cygwin resp. mingw subdirectories dependent of the target.
+       * configure: Regenerate.
+
 2006-08-02  Christopher Faylor  <cgf@timesys.com>
 
        * Makefile.in (subauth): Add dependency on mingw.
index e2f0a0a..5aae116 100644 (file)
@@ -46,6 +46,8 @@ INSTALL_SUBDIRS=${patsubst %,install_%,$(SUBDIRS)}
 CLEAN_SUBDIRS=${patsubst %,clean_%,$(SUBDIRS)}
 ZLIB=${findstring zlib,$(SUBDIRS)}
 
+INSTALL_LICENSE:=@INSTALL_LICENSE@
+
 .PHONY: all install clean all-info info install-info check \
        $(SUBDIRS) $(INSTALL_SUBDIRS) $(CLEAN_SUBDIRS)
 
@@ -61,9 +63,11 @@ endif
 
 all: Makefile $(SUBDIRS)
 
-install: Makefile CYGWIN_LICENSE $(INSTALL_SUBDIRS)
+install-license: CYGWIN_LICENSE 
        $(INSTALL_DATA) $(srcdir)/CYGWIN_LICENSE $(prefix)/share/doc/Cygwin/CYGWIN_LICENSE
 
+install: Makefile $(INSTALL_LICENSE) $(INSTALL_SUBDIRS)
+
 clean: $(CLEAN_SUBDIRS)
 
 all-info:
index 1b65c07..86121a0 100644 (file)
-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
-
-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the winsup
-dnl configure.in files.
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN([LIB_AC_PROG_CC_GNU],
-[AC_CACHE_CHECK(whether we are using GNU C, ac_cv_prog_gcc,
-[dnl The semicolon is to pacify NeXT's syntax-checking cpp.
-cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if AC_TRY_COMMAND(${CC-cc} -E conftest.c) | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# GCC_NO_EXECUTABLES
+# -----------------
+# FIXME: The GCC team has specific needs which the current Autoconf
+# framework cannot solve elegantly.  This macro implements a dirty
+# hack until Autoconf is able to provide the services its users
+# need.
+#
+# Several of the support libraries that are often built with GCC can't
+# assume the tool-chain is already capable of linking a program: the
+# compiler often expects to be able to link with some of such
+# libraries.
+#
+# In several of these libraries, workarounds have been introduced to
+# avoid the AC_PROG_CC_WORKS test, that would just abort their
+# configuration.  The introduction of AC_EXEEXT, enabled either by
+# libtool or by CVS autoconf, have just made matters worse.
+#
+# Unlike the previous AC_NO_EXECUTABLES, this test does not
+# disable link tests at autoconf time, but at configure time.
+# This allows AC_NO_EXECUTABLES to be invoked conditionally.
+AC_DEFUN_ONCE([GCC_NO_EXECUTABLES],
+[m4_divert_push([KILL])
+
+AC_BEFORE([$0], [_AC_COMPILER_EXEEXT])
+AC_BEFORE([$0], [AC_LINK_IFELSE])
+
+m4_define([_AC_COMPILER_EXEEXT],
+AC_LANG_CONFTEST([AC_LANG_PROGRAM()])
+# FIXME: Cleanup?
+AS_IF([AC_TRY_EVAL(ac_link)], [gcc_no_link=no], [gcc_no_link=yes])
+if test x$gcc_no_link = xyes; then
+  # Setting cross_compile will disable run tests; it will
+  # also disable AC_CHECK_FILE but that's generally
+  # correct if we can't link.
+  cross_compiling=yes
+  EXEEXT=
 else
-  ac_cv_prog_gcc=no
-fi])])
-
-AC_DEFUN([LIB_AC_PROG_CC],
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_TOOL(CC, gcc, gcc)
-: ${CC:=gcc}
-AC_PROG_CC
-test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-])
-
-AC_DEFUN([LIB_AC_PROG_CXX],
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_TOOL(CXX, g++, g++)
-if test -z "$CXX"; then
-  AC_CHECK_TOOL(CXX, g++, c++, , , )
-  : ${CXX:=g++}
-  AC_PROG_CXX
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+  m4_defn([_AC_COMPILER_EXEEXT])dnl
 fi
+)
 
-CXXFLAGS='$(CFLAGS)'
-])
-
-# lib-prefix.m4 serial 4 (gettext-0.14.2)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
-  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
-  AC_REQUIRE([AC_PROG_CC])
-  AC_REQUIRE([AC_CANONICAL_HOST])
-  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-  dnl By default, look in $includedir and $libdir.
-  use_additional=yes
-  AC_LIB_WITH_FINAL_PREFIX([
-    eval additional_includedir=\"$includedir\"
-    eval additional_libdir=\"$libdir\"
-  ])
-  AC_LIB_ARG_WITH([lib-prefix],
-[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
-  --without-lib-prefix    don't search for libraries in includedir and libdir],
-[
-    if test "X$withval" = "Xno"; then
-      use_additional=no
-    else
-      if test "X$withval" = "X"; then
-        AC_LIB_WITH_FINAL_PREFIX([
-          eval additional_includedir=\"$includedir\"
-          eval additional_libdir=\"$libdir\"
-        ])
-      else
-        additional_includedir="$withval/include"
-        additional_libdir="$withval/lib"
-      fi
-    fi
-])
-  if test $use_additional = yes; then
-    dnl Potentially add $additional_includedir to $CPPFLAGS.
-    dnl But don't add it
-    dnl   1. if it's the standard /usr/include,
-    dnl   2. if it's already present in $CPPFLAGS,
-    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
-    dnl   4. if it doesn't exist as a directory.
-    if test "X$additional_includedir" != "X/usr/include"; then
-      haveit=
-      for x in $CPPFLAGS; do
-        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-        if test "X$x" = "X-I$additional_includedir"; then
-          haveit=yes
-          break
-        fi
-      done
-      if test -z "$haveit"; then
-        if test "X$additional_includedir" = "X/usr/local/include"; then
-          if test -n "$GCC"; then
-            case $host_os in
-              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-            esac
-          fi
-        fi
-        if test -z "$haveit"; then
-          if test -d "$additional_includedir"; then
-            dnl Really add $additional_includedir to $CPPFLAGS.
-            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
-          fi
-        fi
-      fi
-    fi
-    dnl Potentially add $additional_libdir to $LDFLAGS.
-    dnl But don't add it
-    dnl   1. if it's the standard /usr/lib,
-    dnl   2. if it's already present in $LDFLAGS,
-    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
-    dnl   4. if it doesn't exist as a directory.
-    if test "X$additional_libdir" != "X/usr/lib"; then
-      haveit=
-      for x in $LDFLAGS; do
-        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-        if test "X$x" = "X-L$additional_libdir"; then
-          haveit=yes
-          break
-        fi
-      done
-      if test -z "$haveit"; then
-        if test "X$additional_libdir" = "X/usr/local/lib"; then
-          if test -n "$GCC"; then
-            case $host_os in
-              linux*) haveit=yes;;
-            esac
-          fi
-        fi
-        if test -z "$haveit"; then
-          if test -d "$additional_libdir"; then
-            dnl Really add $additional_libdir to $LDFLAGS.
-            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
-          fi
-        fi
-      fi
-    fi
-  fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
-  dnl Unfortunately, prefix and exec_prefix get only finally determined
-  dnl at the end of configure.
-  if test "X$prefix" = "XNONE"; then
-    acl_final_prefix="$ac_default_prefix"
-  else
-    acl_final_prefix="$prefix"
-  fi
-  if test "X$exec_prefix" = "XNONE"; then
-    acl_final_exec_prefix='${prefix}'
-  else
-    acl_final_exec_prefix="$exec_prefix"
-  fi
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
-  prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  $1
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-])
-
-# lib-link.m4 serial 6 (gettext-0.14.3)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ(2.50)
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
-  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-  AC_REQUIRE([AC_LIB_RPATH])
-  define([Name],[translit([$1],[./-], [___])])
-  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
-    AC_LIB_LINKFLAGS_BODY([$1], [$2])
-    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
-    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
-    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
-  ])
-  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
-  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
-  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
-  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-  AC_SUBST([LIB]NAME)
-  AC_SUBST([LTLIB]NAME)
-  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
-  dnl results of this search when this library appears as a dependency.
-  HAVE_LIB[]NAME=yes
-  undefine([Name])
-  undefine([NAME])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. If found, it
-dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
-  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-  AC_REQUIRE([AC_LIB_RPATH])
-  define([Name],[translit([$1],[./-], [___])])
-  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
-  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
-  dnl accordingly.
-  AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
-  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
-  dnl because if the user has installed lib[]Name and not disabled its use
-  dnl via --without-lib[]Name-prefix, he wants to use it.
-  ac_save_CPPFLAGS="$CPPFLAGS"
-  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
-  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
-    ac_save_LIBS="$LIBS"
-    LIBS="$LIBS $LIB[]NAME"
-    AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
-    LIBS="$ac_save_LIBS"
-  ])
-  if test "$ac_cv_lib[]Name" = yes; then
-    HAVE_LIB[]NAME=yes
-    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
-    AC_MSG_CHECKING([how to link with lib[]$1])
-    AC_MSG_RESULT([$LIB[]NAME])
-  else
-    HAVE_LIB[]NAME=no
-    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
-    dnl $INC[]NAME either.
-    CPPFLAGS="$ac_save_CPPFLAGS"
-    LIB[]NAME=
-    LTLIB[]NAME=
-  fi
-  AC_SUBST([HAVE_LIB]NAME)
-  AC_SUBST([LIB]NAME)
-  AC_SUBST([LTLIB]NAME)
-  undefine([Name])
-  undefine([NAME])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-dnl hardcode_direct, hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
-  dnl Tell automake >= 1.10 to complain if config.rpath is missing.
-  m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
-  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
-  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
-  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
-  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
-  AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
-    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
-    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
-    . ./conftest.sh
-    rm -f ./conftest.sh
-    acl_cv_rpath=done
-  ])
-  wl="$acl_cv_wl"
-  libext="$acl_cv_libext"
-  shlibext="$acl_cv_shlibext"
-  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
-  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
-  hardcode_direct="$acl_cv_hardcode_direct"
-  hardcode_minus_L="$acl_cv_hardcode_minus_L"
-  dnl Determine whether the user wants rpath handling at all.
-  AC_ARG_ENABLE(rpath,
-    [  --disable-rpath         do not hardcode runtime library paths],
-    :, enable_rpath=yes)
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
-  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-  dnl By default, look in $includedir and $libdir.
-  use_additional=yes
-  AC_LIB_WITH_FINAL_PREFIX([
-    eval additional_includedir=\"$includedir\"
-    eval additional_libdir=\"$libdir\"
-  ])
-  AC_LIB_ARG_WITH([lib$1-prefix],
-[  --with-lib$1-prefix[=DIR]  search for lib$1 in DIR/include and DIR/lib
-  --without-lib$1-prefix     don't search for lib$1 in includedir and libdir],
-[
-    if test "X$withval" = "Xno"; then
-      use_additional=no
-    else
-      if test "X$withval" = "X"; then
-        AC_LIB_WITH_FINAL_PREFIX([
-          eval additional_includedir=\"$includedir\"
-          eval additional_libdir=\"$libdir\"
-        ])
-      else
-        additional_includedir="$withval/include"
-        additional_libdir="$withval/lib"
-      fi
-    fi
-])
-  dnl Search the library and its dependencies in $additional_libdir and
-  dnl $LDFLAGS. Using breadth-first-seach.
-  LIB[]NAME=
-  LTLIB[]NAME=
-  INC[]NAME=
-  rpathdirs=
-  ltrpathdirs=
-  names_already_handled=
-  names_next_round='$1 $2'
-  while test -n "$names_next_round"; do
-    names_this_round="$names_next_round"
-    names_next_round=
-    for name in $names_this_round; do
-      already_handled=
-      for n in $names_already_handled; do
-        if test "$n" = "$name"; then
-          already_handled=yes
-          break
-        fi
-      done
-      if test -z "$already_handled"; then
-        names_already_handled="$names_already_handled $name"
-        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
-        dnl or AC_LIB_HAVE_LINKFLAGS call.
-        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
-        eval value=\"\$HAVE_LIB$uppername\"
-        if test -n "$value"; then
-          if test "$value" = yes; then
-            eval value=\"\$LIB$uppername\"
-            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
-            eval value=\"\$LTLIB$uppername\"
-            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
-          else
-            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
-            dnl that this library doesn't exist. So just drop it.
-            :
-          fi
-        else
-          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
-          dnl and the already constructed $LIBNAME/$LTLIBNAME.
-          found_dir=
-          found_la=
-          found_so=
-          found_a=
-          if test $use_additional = yes; then
-            if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
-              found_dir="$additional_libdir"
-              found_so="$additional_libdir/lib$name.$shlibext"
-              if test -f "$additional_libdir/lib$name.la"; then
-                found_la="$additional_libdir/lib$name.la"
-              fi
-            else
-              if test -f "$additional_libdir/lib$name.$libext"; then
-                found_dir="$additional_libdir"
-                found_a="$additional_libdir/lib$name.$libext"
-                if test -f "$additional_libdir/lib$name.la"; then
-                  found_la="$additional_libdir/lib$name.la"
-                fi
-              fi
-            fi
-          fi
-          if test "X$found_dir" = "X"; then
-            for x in $LDFLAGS $LTLIB[]NAME; do
-              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-              case "$x" in
-                -L*)
-                  dir=`echo "X$x" | sed -e 's/^X-L//'`
-                  if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
-                    found_dir="$dir"
-                    found_so="$dir/lib$name.$shlibext"
-                    if test -f "$dir/lib$name.la"; then
-                      found_la="$dir/lib$name.la"
-                    fi
-                  else
-                    if test -f "$dir/lib$name.$libext"; then
-                      found_dir="$dir"
-                      found_a="$dir/lib$name.$libext"
-                      if test -f "$dir/lib$name.la"; then
-                        found_la="$dir/lib$name.la"
-                      fi
-                    fi
-                  fi
-                  ;;
-              esac
-              if test "X$found_dir" != "X"; then
-                break
-              fi
-            done
-          fi
-          if test "X$found_dir" != "X"; then
-            dnl Found the library.
-            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
-            if test "X$found_so" != "X"; then
-              dnl Linking with a shared library. We attempt to hardcode its
-              dnl directory into the executable's runpath, unless it's the
-              dnl standard /usr/lib.
-              if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
-                dnl No hardcoding is needed.
-                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-              else
-                dnl Use an explicit option to hardcode DIR into the resulting
-                dnl binary.
-                dnl Potentially add DIR to ltrpathdirs.
-                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-                haveit=
-                for x in $ltrpathdirs; do
-                  if test "X$x" = "X$found_dir"; then
-                    haveit=yes
-                    break
-                  fi
-                done
-                if test -z "$haveit"; then
-                  ltrpathdirs="$ltrpathdirs $found_dir"
-                fi
-                dnl The hardcoding into $LIBNAME is system dependent.
-                if test "$hardcode_direct" = yes; then
-                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
-                  dnl resulting binary.
-                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-                else
-                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
-                    dnl Use an explicit option to hardcode DIR into the resulting
-                    dnl binary.
-                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-                    dnl Potentially add DIR to rpathdirs.
-                    dnl The rpathdirs will be appended to $LIBNAME at the end.
-                    haveit=
-                    for x in $rpathdirs; do
-                      if test "X$x" = "X$found_dir"; then
-                        haveit=yes
-                        break
-                      fi
-                    done
-                    if test -z "$haveit"; then
-                      rpathdirs="$rpathdirs $found_dir"
-                    fi
-                  else
-                    dnl Rely on "-L$found_dir".
-                    dnl But don't add it if it's already contained in the LDFLAGS
-                    dnl or the already constructed $LIBNAME
-                    haveit=
-                    for x in $LDFLAGS $LIB[]NAME; do
-                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                      if test "X$x" = "X-L$found_dir"; then
-                        haveit=yes
-                        break
-                      fi
-                    done
-                    if test -z "$haveit"; then
-                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
-                    fi
-                    if test "$hardcode_minus_L" != no; then
-                      dnl FIXME: Not sure whether we should use
-                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-                      dnl here.
-                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-                    else
-                      dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
-                      dnl here, because this doesn't fit in flags passed to the
-                      dnl compiler. So give up. No hardcoding. This affects only
-                      dnl very old systems.
-                      dnl FIXME: Not sure whether we should use
-                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-                      dnl here.
-                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-                    fi
-                  fi
-                fi
-              fi
-            else
-              if test "X$found_a" != "X"; then
-                dnl Linking with a static library.
-                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
-              else
-                dnl We shouldn't come here, but anyway it's good to have a
-                dnl fallback.
-                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
-              fi
-            fi
-            dnl Assume the include files are nearby.
-            additional_includedir=
-            case "$found_dir" in
-              */lib | */lib/)
-                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
-                additional_includedir="$basedir/include"
-                ;;
-            esac
-            if test "X$additional_includedir" != "X"; then
-              dnl Potentially add $additional_includedir to $INCNAME.
-              dnl But don't add it
-              dnl   1. if it's the standard /usr/include,
-              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
-              dnl   3. if it's already present in $CPPFLAGS or the already
-              dnl      constructed $INCNAME,
-              dnl   4. if it doesn't exist as a directory.
-              if test "X$additional_includedir" != "X/usr/include"; then
-                haveit=
-                if test "X$additional_includedir" = "X/usr/local/include"; then
-                  if test -n "$GCC"; then
-                    case $host_os in
-                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-                    esac
-                  fi
-                fi
-                if test -z "$haveit"; then
-                  for x in $CPPFLAGS $INC[]NAME; do
-                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                    if test "X$x" = "X-I$additional_includedir"; then
-                      haveit=yes
-                      break
-                    fi
-                  done
-                  if test -z "$haveit"; then
-                    if test -d "$additional_includedir"; then
-                      dnl Really add $additional_includedir to $INCNAME.
-                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
-                    fi
-                  fi
-                fi
-              fi
-            fi
-            dnl Look for dependencies.
-            if test -n "$found_la"; then
-              dnl Read the .la file. It defines the variables
-              dnl dlname, library_names, old_library, dependency_libs, current,
-              dnl age, revision, installed, dlopen, dlpreopen, libdir.
-              save_libdir="$libdir"
-              case "$found_la" in
-                */* | *\\*) . "$found_la" ;;
-                *) . "./$found_la" ;;
-              esac
-              libdir="$save_libdir"
-              dnl We use only dependency_libs.
-              for dep in $dependency_libs; do
-                case "$dep" in
-                  -L*)
-                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
-                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
-                    dnl But don't add it
-                    dnl   1. if it's the standard /usr/lib,
-                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
-                    dnl   3. if it's already present in $LDFLAGS or the already
-                    dnl      constructed $LIBNAME,
-                    dnl   4. if it doesn't exist as a directory.
-                    if test "X$additional_libdir" != "X/usr/lib"; then
-                      haveit=
-                      if test "X$additional_libdir" = "X/usr/local/lib"; then
-                        if test -n "$GCC"; then
-                          case $host_os in
-                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-                          esac
-                        fi
-                      fi
-                      if test -z "$haveit"; then
-                        haveit=
-                        for x in $LDFLAGS $LIB[]NAME; do
-                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                          if test "X$x" = "X-L$additional_libdir"; then
-                            haveit=yes
-                            break
-                          fi
-                        done
-                        if test -z "$haveit"; then
-                          if test -d "$additional_libdir"; then
-                            dnl Really add $additional_libdir to $LIBNAME.
-                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
-                          fi
-                        fi
-                        haveit=
-                        for x in $LDFLAGS $LTLIB[]NAME; do
-                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                          if test "X$x" = "X-L$additional_libdir"; then
-                            haveit=yes
-                            break
-                          fi
-                        done
-                        if test -z "$haveit"; then
-                          if test -d "$additional_libdir"; then
-                            dnl Really add $additional_libdir to $LTLIBNAME.
-                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
-                          fi
-                        fi
-                      fi
-                    fi
-                    ;;
-                  -R*)
-                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
-                    if test "$enable_rpath" != no; then
-                      dnl Potentially add DIR to rpathdirs.
-                      dnl The rpathdirs will be appended to $LIBNAME at the end.
-                      haveit=
-                      for x in $rpathdirs; do
-                        if test "X$x" = "X$dir"; then
-                          haveit=yes
-                          break
-                        fi
-                      done
-                      if test -z "$haveit"; then
-                        rpathdirs="$rpathdirs $dir"
-                      fi
-                      dnl Potentially add DIR to ltrpathdirs.
-                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-                      haveit=
-                      for x in $ltrpathdirs; do
-                        if test "X$x" = "X$dir"; then
-                          haveit=yes
-                          break
-                        fi
-                      done
-                      if test -z "$haveit"; then
-                        ltrpathdirs="$ltrpathdirs $dir"
-                      fi
-                    fi
-                    ;;
-                  -l*)
-                    dnl Handle this in the next round.
-                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
-                    ;;
-                  *.la)
-                    dnl Handle this in the next round. Throw away the .la's
-                    dnl directory; it is already contained in a preceding -L
-                    dnl option.
-                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
-                    ;;
-                  *)
-                    dnl Most likely an immediate library name.
-                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
-                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
-                    ;;
-                esac
-              done
-            fi
-          else
-            dnl Didn't find the library; assume it is in the system directories
-            dnl known to the linker and runtime loader. (All the system
-            dnl directories known to the linker should also be known to the
-            dnl runtime loader, otherwise the system is severely misconfigured.)
-            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
-          fi
-        fi
-      fi
-    done
-  done
-  if test "X$rpathdirs" != "X"; then
-    if test -n "$hardcode_libdir_separator"; then
-      dnl Weird platform: only the last -rpath option counts, the user must
-      dnl pass all path elements in one option. We can arrange that for a
-      dnl single library, but not when more than one $LIBNAMEs are used.
-      alldirs=
-      for found_dir in $rpathdirs; do
-        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
-      done
-      dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
-      acl_save_libdir="$libdir"
-      libdir="$alldirs"
-      eval flag=\"$hardcode_libdir_flag_spec\"
-      libdir="$acl_save_libdir"
-      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-    else
-      dnl The -rpath options are cumulative.
-      for found_dir in $rpathdirs; do
-        acl_save_libdir="$libdir"
-        libdir="$found_dir"
-        eval flag=\"$hardcode_libdir_flag_spec\"
-        libdir="$acl_save_libdir"
-        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-      done
-    fi
-  fi
-  if test "X$ltrpathdirs" != "X"; then
-    dnl When using libtool, the option that works for both libraries and
-    dnl executables is -R. The -R options are cumulative.
-    for found_dir in $ltrpathdirs; do
-      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
-    done
-  fi
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
-  for element in [$2]; do
-    haveit=
-    for x in $[$1]; do
-      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-      if test "X$x" = "X$element"; then
-        haveit=yes
-        break
-      fi
-    done
-    if test -z "$haveit"; then
-      [$1]="${[$1]}${[$1]:+ }$element"
-    fi
-  done
-])
-
-# lib-ld.m4 serial 3 (gettext-0.13)
-dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  acl_cv_prog_gnu_ld=yes ;;
-*)
-  acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      [re_direlt='/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-       ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
+m4_define([AC_LINK_IFELSE],
+if test x$gcc_no_link = xyes; then
+  AC_MSG_ERROR([Link tests are not allowed after [[$0]].])
 fi
-AC_CACHE_VAL(acl_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      acl_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
-      *GNU* | *'with BFD'*)
-       test "$with_gnu_ld" != no && break ;;
-      *)
-       test "$with_gnu_ld" != yes && break ;;
-      esac
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
+m4_defn([AC_LINK_IFELSE]))
+
+dnl This is a shame.  We have to provide a default for some link tests,
+dnl similar to the default for run tests.
+m4_define([AC_FUNC_MMAP],
+if test x$gcc_no_link = xyes; then
+  if test "x${ac_cv_func_mmap_fixed_mapped+set}" != xset; then
+    ac_cv_func_mmap_fixed_mapped=no
+  fi
 fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
+if test "x${ac_cv_func_mmap_fixed_mapped}" != xno; then
+  m4_defn([AC_FUNC_MMAP])
+fi)
+
+m4_divert_pop()dnl
+])# GCC_NO_EXECUTABLES
 
+m4_include([acinclude.m4])
index a3ccdd4..dccf811 100755 (executable)
@@ -272,12 +272,13 @@ PACKAGE_STRING=
 PACKAGE_BUGREPORT=
 
 ac_unique_file="Makefile.in"
-ac_subdirs_all="$ac_subdirs_all cygwin w32api"
+ac_subdirs_all="$ac_subdirs_all cygwin"
 ac_subdirs_all="$ac_subdirs_all mingw"
+ac_subdirs_all="$ac_subdirs_all w32api"
 ac_subdirs_all="$ac_subdirs_all subauth"
 ac_subdirs_all="$ac_subdirs_all cygserver"
 ac_subdirs_all="$ac_subdirs_all utils doc"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT CXX ac_ct_CXX CXXFLAGS subdirs SET_MAKE LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT CXX ac_ct_CXX CXXFLAGS subdirs INSTALL_LICENSE SET_MAKE LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -1457,6 +1458,8 @@ test -n "$target_alias" &&
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
 
+
+
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
@@ -1888,6 +1891,39 @@ main ()
   return 0;
 }
 _ACEOF
+# FIXME: Cleanup?
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  gcc_no_link=no
+else
+  gcc_no_link=yes
+fi
+
+if test x$gcc_no_link = xyes; then
+  # Setting cross_compile will disable run tests; it will
+  # also disable AC_CHECK_FILE but that's generally
+  # correct if we can't link.
+  cross_compiling=yes
+  EXEEXT=
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files a.out a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
@@ -2024,6 +2060,7 @@ echo "${ECHO_T}$ac_cv_exeext" >&6
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
+fi
 echo "$as_me:$LINENO: checking for suffix of object files" >&5
 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
 if test "${ac_cv_objext+set}" = set; then
@@ -3015,9 +3052,29 @@ esac
 
 fi;
 
+INSTALL_LICENSE=
+
+case "$target" in
+  *cygwin*)
+    if ! test -d $srcdir/cygwin; then
+      { { echo "$as_me:$LINENO: error: \"No cygwin dir.  Can't build Cygwin.  Exiting...\"" >&5
+echo "$as_me: error: \"No cygwin dir.  Can't build Cygwin.  Exiting...\"" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+
 
+subdirs="$subdirs cygwin"
 
-subdirs="$subdirs cygwin w32api"
+    INSTALL_LICENSE="install-license"
+    ;;
+  *mingw*)
+    if ! test -d $srcdir/mingw; then
+      { { echo "$as_me:$LINENO: error: \"No mingw dir.  Can't build Mingw.  Exiting...\"" >&5
+echo "$as_me: error: \"No mingw dir.  Can't build Mingw.  Exiting...\"" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+    ;;
+esac
 
 if test -d $srcdir/mingw; then
 
@@ -3026,6 +3083,10 @@ subdirs="$subdirs mingw"
 
 fi
 
+
+subdirs="$subdirs w32api"
+
+
 case "$with_cross_host" in
   ""|*cygwin*)
     # if test -d $srcdir/bz2lib; then
@@ -3053,6 +3114,8 @@ subdirs="$subdirs utils doc"
     ;;
 esac
 
+
+
 echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
@@ -3197,9 +3260,10 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_i=`echo "$ac_i" |
         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -3745,6 +3809,7 @@ s,@CXX@,$CXX,;t t
 s,@ac_ct_CXX@,$ac_ct_CXX,;t t
 s,@CXXFLAGS@,$CXXFLAGS,;t t
 s,@subdirs@,$subdirs,;t t
+s,@INSTALL_LICENSE@,$INSTALL_LICENSE,;t t
 s,@SET_MAKE@,$SET_MAKE,;t t
 s,@LIBOBJS@,$LIBOBJS,;t t
 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
index 2eb69fe..a6e10e0 100755 (executable)
@@ -17,6 +17,8 @@ INSTALL=`cd $srcdir/..; echo $(pwd)/install-sh -c`
 AC_PROG_INSTALL
 AC_CANONICAL_SYSTEM
 
+GCC_NO_EXECUTABLES
+
 LIB_AC_PROG_CC
 LIB_AC_PROG_CXX
 
@@ -31,10 +33,27 @@ no) use_cygserver=;;
 esac
 ])
 
-AC_CONFIG_SUBDIRS(cygwin w32api)
+INSTALL_LICENSE=
+
+case "$target" in
+  *cygwin*)
+    if ! test -d $srcdir/cygwin; then
+      AC_MSG_ERROR("No cygwin dir.  Can't build Cygwin.  Exiting...")
+    fi
+    AC_CONFIG_SUBDIRS(cygwin)
+    INSTALL_LICENSE="install-license"
+    ;;
+  *mingw*)
+    if ! test -d $srcdir/mingw; then
+      AC_MSG_ERROR("No mingw dir.  Can't build Mingw.  Exiting...")
+    fi
+    ;;
+esac
+
 if test -d $srcdir/mingw; then
   AC_CONFIG_SUBDIRS(mingw)
 fi
+AC_CONFIG_SUBDIRS(w32api)
 
 case "$with_cross_host" in
   ""|*cygwin*)
@@ -54,6 +73,8 @@ case "$with_cross_host" in
     ;;
 esac
 
+AC_SUBST(INSTALL_LICENSE)
+
 AC_PROG_MAKE_SET
 
 AC_OUTPUT(Makefile)