offsetof(CPUARMState, QEMUFIELD) \
}
-#define CP15REG(CRN, CRM, OPC1, OPC2, QEMUFIELD) \
- { \
- KVM_REG_ARM | KVM_REG_SIZE_U32 | \
- (15 << KVM_REG_ARM_COPROC_SHIFT) | \
- ((CRN) << KVM_REG_ARM_32_CRN_SHIFT) | \
- ((CRM) << KVM_REG_ARM_CRM_SHIFT) | \
- ((OPC1) << KVM_REG_ARM_OPC1_SHIFT) | \
- ((OPC2) << KVM_REG_ARM_32_OPC2_SHIFT), \
- offsetof(CPUARMState, QEMUFIELD) \
- }
-
#define VFPSYSREG(R) \
{ \
KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP | \
COREREG(fiq_regs[7], banked_spsr[5]),
/* R15 */
COREREG(usr_regs.uregs[15], regs[15]),
- /* A non-comprehensive set of cp15 registers.
- * TODO: drive this from the cp_regs hashtable instead.
- */
- CP15REG(1, 0, 0, 0, cp15.c1_sys), /* SCTLR */
- CP15REG(2, 0, 0, 2, cp15.c2_control), /* TTBCR */
- CP15REG(3, 0, 0, 0, cp15.c3), /* DACR */
/* VFP system registers */
VFPSYSREG(FPSID),
VFPSYSREG(MVFR1),
int mode, bn;
int ret, i;
uint32_t cpsr, fpscr;
- uint64_t ttbr;
/* Make sure the banked regs are properly set */
mode = env->uncached_cpsr & CPSR_M;
return ret;
}
- /* TTBR0: cp15 crm=2 opc1=0 */
- ttbr = ((uint64_t)env->cp15.c2_base0_hi << 32) | env->cp15.c2_base0;
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
- (2 << KVM_REG_ARM_CRM_SHIFT) | (0 << KVM_REG_ARM_OPC1_SHIFT);
- r.addr = (uintptr_t)(&ttbr);
- ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
-
- /* TTBR1: cp15 crm=2 opc1=1 */
- ttbr = ((uint64_t)env->cp15.c2_base1_hi << 32) | env->cp15.c2_base1;
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
- (2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT);
- r.addr = (uintptr_t)(&ttbr);
- ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
-
/* VFP registers */
r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
for (i = 0; i < 32; i++) {
fpscr = vfp_get_fpscr(env);
r.addr = (uintptr_t)&fpscr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
+ if (ret) {
+ return ret;
+ }
+
+ /* Note that we do not call write_cpustate_to_list()
+ * here, so we are only writing the tuple list back to
+ * KVM. This is safe because nothing can change the
+ * CPUARMState cp15 fields (in particular gdb accesses cannot)
+ * and so there are no changes to sync. In fact syncing would
+ * be wrong at this point: for a constant register where TCG and
+ * KVM disagree about its value, the preceding write_list_to_cpustate()
+ * would not have had any effect on the CPUARMState value (since the
+ * register is read-only), and a write_cpustate_to_list() here would
+ * then try to write the TCG value back into KVM -- this would either
+ * fail or incorrectly change the value the guest sees.
+ *
+ * If we ever want to allow the user to modify cp15 registers via
+ * the gdb stub, we would need to be more clever here (for instance
+ * tracking the set of registers kvm_arch_get_registers() successfully
+ * managed to update the CPUARMState with, and only allowing those
+ * to be written back up into the kernel).
+ */
+ if (!write_list_to_kvmstate(cpu)) {
+ return EINVAL;
+ }
return ret;
}
int mode, bn;
int ret, i;
uint32_t cpsr, fpscr;
- uint64_t ttbr;
for (i = 0; i < ARRAY_SIZE(regs); i++) {
r.id = regs[i].id;
}
cpsr_write(env, cpsr, 0xffffffff);
- /* TTBR0: cp15 crm=2 opc1=0 */
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
- (2 << KVM_REG_ARM_CRM_SHIFT) | (0 << KVM_REG_ARM_OPC1_SHIFT);
- r.addr = (uintptr_t)(&ttbr);
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- env->cp15.c2_base0_hi = ttbr >> 32;
- env->cp15.c2_base0 = ttbr;
-
- /* TTBR1: cp15 crm=2 opc1=1 */
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) |
- (2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT);
- r.addr = (uintptr_t)(&ttbr);
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- env->cp15.c2_base1_hi = ttbr >> 32;
- env->cp15.c2_base1 = ttbr;
-
/* Make sure the current mode regs are properly set */
mode = env->uncached_cpsr & CPSR_M;
bn = bank_number(mode);
env->regs[14] = env->banked_r14[bn];
env->spsr = env->banked_spsr[bn];
- /* The main GET_ONE_REG loop above set c2_control, but we need to
- * update some extra cached precomputed values too.
- * When this is driven from the cp_regs hashtable then this ugliness
- * can disappear because we'll use the access function which sets
- * these values automatically.
- */
- env->cp15.c2_mask = ~(0xffffffffu >> env->cp15.c2_control);
- env->cp15.c2_base_mask = ~(0x3fffu >> env->cp15.c2_control);
-
/* VFP registers */
r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
for (i = 0; i < 32; i++) {
}
vfp_set_fpscr(env, fpscr);
+ if (!write_kvmstate_to_list(cpu)) {
+ return EINVAL;
+ }
+ /* Note that it's OK to have registers which aren't in CPUState,
+ * so we can ignore a failure return here.
+ */
+ write_list_to_cpustate(cpu);
+
return 0;
}