2000-03-22 Mark Kettenis <kettenis@gnu.org>

	* config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
	* config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
	Remove
	* i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
	(i386_extract_return_value): Rewritten.  Correctly support all
	floating-point types and large integer types on targets that use
	the standard i386 GDB register layout and return floating-point
	values in the FPU.

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 62b53b5..318aea5 100644 (file)
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,14 @@
+2000-03-22  Mark Kettenis  <kettenis@gnu.org>
+
+       * config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
+       * config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
+       Remove
+       * i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
+       (i386_extract_return_value): Rewritten.  Correctly support all
+       floating-point types and large integer types on targets that use
+       the standard i386 GDB register layout and return floating-point
+       values in the FPU.
+
 Wed Mar 22 15:09:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 
        * configure.in (CONFIG_INITS): Do not append remote-nrom.c

diff --git a/gdb/config/i386/tm-i386aix.h b/gdb/config/i386/tm-i386aix.h
index 6fed83d..809fb3d 100644 (file)
--- a/gdb/config/i386/tm-i386aix.h
+++ b/gdb/config/i386/tm-i386aix.h
@@ -30,14 +30,6 @@
 #define I386 1
 #endif
 
-/* FIXME: kettenis/2000-03-02: This is used in
-   i386-tdep.c:i386_extract_return_value(), and will be remove once
-   I've fixed that.  Meanwhile don't use it for any other purpose
-   please!  */
-#ifndef I386_AIX_TARGET
-#define I386_AIX_TARGET 1
-#endif
-
 /* AIX/i386 has FPU support.  However, the native configuration (which
    is the only supported configuration) doesn't make the FPU control
    registers available.  Override the appropriate symbols such that

diff --git a/gdb/config/i386/tm-linux.h b/gdb/config/i386/tm-linux.h
index c6d8dde..2e86a5c 100644 (file)
--- a/gdb/config/i386/tm-linux.h
+++ b/gdb/config/i386/tm-linux.h
@@ -30,9 +30,6 @@
 #include "i386/tm-i386.h"
 #include "tm-linux.h"
 
-#define LOW_RETURN_REGNUM 0    /* holds low four bytes of result */
-#define HIGH_RETURN_REGNUM 2   /* holds high four bytes of result */
-
 /* This should probably move to tm-i386.h.  */
 #define TARGET_LONG_DOUBLE_BIT 80
 

diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c
index 2420ec1..421a7a0 100644 (file)
--- a/gdb/i386-tdep.c
+++ b/gdb/i386-tdep.c
@@ -698,56 +698,66 @@ get_longjmp_target (pc)
 
 #endif /* GET_LONGJMP_TARGET */
 
+/* These registers are used for returning integers (and on some
+   targets also for returning `struct' and `union' values when their
+   size and alignment match an integer type.  */
+#define LOW_RETURN_REGNUM 0    /* %eax */
+#define HIGH_RETURN_REGNUM 2   /* %edx */
+
+/* Extract from an array REGBUF containing the (raw) register state, a
+   function return value of TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
 void
-i386_extract_return_value (type, regbuf, valbuf)
-     struct type *type;
-     char regbuf[REGISTER_BYTES];
-     char *valbuf;
+i386_extract_return_value (struct type *type, char *regbuf, char *valbuf)
 {
-  /* On AIX, i386 GNU/Linux and DJGPP, floating point values are
-     returned in floating point registers.  */
-  /* FIXME: cagney/2000-02-29: This function needs to be rewritten
-     using multi-arch. Please don't keep adding to this #ifdef
-     spaghetti. */
-#if defined(I386_AIX_TARGET) || defined(I386_GNULINUX_TARGET) || defined(I386_DJGPP_TARGET)
+  int len = TYPE_LENGTH (type);
+
   if (TYPE_CODE_FLT == TYPE_CODE (type))
     {
-      double d;
-      /* 387 %st(0), gcc uses this */
-      floatformat_to_double (&floatformat_i387_ext,
-#if defined(FPDATA_REGNUM)
-                            &regbuf[REGISTER_BYTE (FPDATA_REGNUM)],
-#else /* !FPDATA_REGNUM */
-                            &regbuf[REGISTER_BYTE (FP0_REGNUM)],
-#endif /* FPDATA_REGNUM */
-
-                            &d);
-      store_floating (valbuf, TYPE_LENGTH (type), d);
+      if (NUM_FREGS == 0)
+       {
+         warning ("Cannot find floating-point return value.");
+         memset (valbuf, 0, len);
+       }
+
+      /* Floating-point return values can be found in %st(0).  */
+      if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
+         && TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
+       {
+         /* Copy straight over, but take care of the padding.  */
+         memcpy (valbuf, &regbuf[REGISTER_BYTE (FP0_REGNUM)],
+                 FPU_REG_RAW_SIZE);
+         memset (valbuf + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
+       }
+      else
+       {
+         /* Convert the extended floating-point number found in
+             %st(0) to the desired type.  This is probably not exactly
+             how it would happen on the target itself, but it is the
+             best we can do.  */
+         DOUBLEST val;
+         floatformat_to_doublest (&floatformat_i387_ext,
+                                  &regbuf[REGISTER_BYTE (FP0_REGNUM)], &val);
+         store_floating (valbuf, TYPE_LENGTH (type), val);
+       }
     }
   else
-#endif /* I386_AIX_TARGET || I386_GNULINUX_TARGET || I386_DJGPP_TARGET */
     {
-#if defined(LOW_RETURN_REGNUM)
-      int len = TYPE_LENGTH (type);
       int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
       int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
 
       if (len <= low_size)
-       memcpy (valbuf, regbuf + REGISTER_BYTE (LOW_RETURN_REGNUM), len);
+       memcpy (valbuf, &regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)], len);
       else if (len <= (low_size + high_size))
        {
          memcpy (valbuf,
-                 regbuf + REGISTER_BYTE (LOW_RETURN_REGNUM),
-                 low_size);
+                 &regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)], low_size);
          memcpy (valbuf + low_size,
-                 regbuf + REGISTER_BYTE (HIGH_RETURN_REGNUM),
-                 len - low_size);
+                 &regbuf[REGISTER_BYTE (HIGH_RETURN_REGNUM)], len - low_size);
        }
       else
-       error ("GDB bug: i386-tdep.c (i386_extract_return_value): Don't know how to find a return value %d bytes long", len);
-#else /* !LOW_RETURN_REGNUM */
-      memcpy (valbuf, regbuf, TYPE_LENGTH (type));
-#endif /* LOW_RETURN_REGNUM */
+       internal_error ("Cannot extract return value of %d bytes long.", len);
     }
 }