;;
darwin* | rhapsody*)
+ # this will be overwritten by pass_all, but leave it in just in case
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
+ lt_cv_deplibs_check_method=pass_all
;;
freebsd* | kfreebsd*-gnu)
# This must be Linux ELF.
linux-gnu*)
- case $host_cpu in
- alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ lt_cv_deplibs_check_method=pass_all
;;
netbsd* | knetbsd*-gnu)
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+ esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len" ; then
+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+ echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 3982 "configure"' > conftest.$ac_ext
+ echo '#line 4038 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
rm -rf conftest*
;;
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-ALL_LINGUAS="fr sv tr es da de id pt_BR ro nl fi vi ga"
+ALL_LINGUAS="fr sv tr es da de id pt_BR ro nl fi vi ga zh_CN"
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
--- /dev/null
+# Simplified Chinese translation for opcode.
+# Copyright (C) 2005 Free Software Foundation, Inc.
+# This file is distributed under the same license as the binutils package.
+# Meng Jie <zuxyhere@eastday.com>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: opcodes 2.15.96\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-03-05 20:32+1030\n"
+"PO-Revision-Date: 2006-01-15 02:10+0800\n"
+"Last-Translator: Meng Jie <zuxyhere@eastday.com>\n"
+"Language-Team: Chinese (simplified) <i18n-translation@lists.linux.net.cn>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: alpha-opc.c:331
+msgid "branch operand unaligned"
+msgstr "分支操作数未对齐"
+
+#: alpha-opc.c:353 alpha-opc.c:374
+msgid "jump hint unaligned"
+msgstr "跳转提示未对齐"
+
+#: arc-dis.c:76
+msgid "Illegal limm reference in last instruction!\n"
+msgstr ""
+
+#: arm-dis.c:1267
+msgid "<illegal precision>"
+msgstr "<非法的精度>"
+
+#. XXX - should break 'option' at following delimiter.
+#: arm-dis.c:1912
+#, c-format
+msgid "Unrecognised register name set: %s\n"
+msgstr "无法识别的寄存器名称集：%s\n"
+
+#. XXX - should break 'option' at following delimiter.
+#: arm-dis.c:1920
+#, c-format
+msgid "Unrecognised disassembler option: %s\n"
+msgstr "无法识别的反汇编器选项：%s\n"
+
+#: arm-dis.c:2093
+#, c-format
+msgid ""
+"\n"
+"The following ARM specific disassembler options are supported for use with\n"
+"the -M switch:\n"
+msgstr ""
+"\n"
+"下列 ARM 特定的反汇编器选项在使用 -M 开关时可用：\n"
+
+#: avr-dis.c:112 avr-dis.c:122
+#, c-format
+msgid "undefined"
+msgstr "未定义"
+
+#: avr-dis.c:179
+#, c-format
+msgid "Internal disassembler error"
+msgstr "反汇编器内部错误"
+
+#: avr-dis.c:227
+#, c-format
+msgid "unknown constraint `%c'"
+msgstr "未知的约束‘%c’"
+
+#: cgen-asm.c:336 fr30-ibld.c:197 frv-ibld.c:197 ip2k-ibld.c:197
+#: iq2000-ibld.c:197 m32r-ibld.c:197 openrisc-ibld.c:197 xstormy16-ibld.c:197
+#, c-format
+msgid "operand out of range (%ld not between %ld and %ld)"
+msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"
+
+#: cgen-asm.c:358
+#, c-format
+msgid "operand out of range (%lu not between %lu and %lu)"
+msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)"
+
+#: d30v-dis.c:312
+#, c-format
+msgid "<unknown register %d>"
+msgstr "<未知的寄存器 %d>"
+
+#. Can't happen.
+#: dis-buf.c:57
+#, c-format
+msgid "Unknown error %d\n"
+msgstr "未知错误 %d\n"
+
+#: dis-buf.c:66
+#, c-format
+msgid "Address 0x%s is out of bounds.\n"
+msgstr "地址 0x%s 越界。\n"
+
+#: fr30-asm.c:323 frv-asm.c:1298 ip2k-asm.c:530 iq2000-asm.c:465
+#: m32r-asm.c:338 openrisc-asm.c:252 xstormy16-asm.c:284
+#, fuzzy, c-format
+msgid "Unrecognized field %d while parsing.\n"
+msgstr "词法分析字段时出错\n"
+
+#: fr30-asm.c:372 frv-asm.c:1347 ip2k-asm.c:579 iq2000-asm.c:514
+#: m32r-asm.c:387 openrisc-asm.c:301 xstormy16-asm.c:333
+msgid "missing mnemonic in syntax string"
+msgstr "语法字符串中没有助记符"
+
+#. We couldn't parse it.
+#: fr30-asm.c:507 fr30-asm.c:511 fr30-asm.c:598 fr30-asm.c:699 frv-asm.c:1482
+#: frv-asm.c:1486 frv-asm.c:1573 frv-asm.c:1674 ip2k-asm.c:714 ip2k-asm.c:718
+#: ip2k-asm.c:805 ip2k-asm.c:906 iq2000-asm.c:649 iq2000-asm.c:653
+#: iq2000-asm.c:740 iq2000-asm.c:841 m32r-asm.c:522 m32r-asm.c:526
+#: m32r-asm.c:613 m32r-asm.c:714 openrisc-asm.c:436 openrisc-asm.c:440
+#: openrisc-asm.c:527 openrisc-asm.c:628 xstormy16-asm.c:468
+#: xstormy16-asm.c:472 xstormy16-asm.c:559 xstormy16-asm.c:660
+msgid "unrecognized instruction"
+msgstr "无法识别的指令"
+
+#: fr30-asm.c:554 frv-asm.c:1529 ip2k-asm.c:761 iq2000-asm.c:696
+#: m32r-asm.c:569 openrisc-asm.c:483 xstormy16-asm.c:515
+#, c-format
+msgid "syntax error (expected char `%c', found `%c')"
+msgstr "语法错误(需要字符‘%c’，得到‘%c’)"
+
+#: fr30-asm.c:564 frv-asm.c:1539 ip2k-asm.c:771 iq2000-asm.c:706
+#: m32r-asm.c:579 openrisc-asm.c:493 xstormy16-asm.c:525
+#, c-format
+msgid "syntax error (expected char `%c', found end of instruction)"
+msgstr "语法错误(需要字符‘%c’，却到达指令尾)"
+
+#: fr30-asm.c:592 frv-asm.c:1567 ip2k-asm.c:799 iq2000-asm.c:734
+#: m32r-asm.c:607 openrisc-asm.c:521 xstormy16-asm.c:553
+msgid "junk at end of line"
+msgstr "行尾有垃圾字符"
+
+#: fr30-asm.c:698 frv-asm.c:1673 ip2k-asm.c:905 iq2000-asm.c:840
+#: m32r-asm.c:713 openrisc-asm.c:627 xstormy16-asm.c:659
+msgid "unrecognized form of instruction"
+msgstr "无法识别的指令格式"
+
+#: fr30-asm.c:710 frv-asm.c:1685 ip2k-asm.c:917 iq2000-asm.c:852
+#: m32r-asm.c:725 openrisc-asm.c:639 xstormy16-asm.c:671
+#, c-format
+msgid "bad instruction `%.50s...'"
+msgstr "错误的指令‘%.50s...’"
+
+#: fr30-asm.c:713 frv-asm.c:1688 ip2k-asm.c:920 iq2000-asm.c:855
+#: m32r-asm.c:728 openrisc-asm.c:642 xstormy16-asm.c:674
+#, c-format
+msgid "bad instruction `%.50s'"
+msgstr "错误的指令‘%.50s’"
+
+#. Default text to print if an instruction isn't recognized.
+#: fr30-dis.c:41 frv-dis.c:41 ip2k-dis.c:41 iq2000-dis.c:41 m32r-dis.c:41
+#: mmix-dis.c:284 openrisc-dis.c:41 xstormy16-dis.c:41
+msgid "*unknown*"
+msgstr "*未知*"
+
+#: fr30-dis.c:319 frv-dis.c:410 ip2k-dis.c:313 iq2000-dis.c:191 m32r-dis.c:262
+#: openrisc-dis.c:137 xstormy16-dis.c:170
+#, c-format
+msgid "Unrecognized field %d while printing insn.\n"
+msgstr ""
+
+#: fr30-ibld.c:168 frv-ibld.c:168 ip2k-ibld.c:168 iq2000-ibld.c:168
+#: m32r-ibld.c:168 openrisc-ibld.c:168 xstormy16-ibld.c:168
+#, c-format
+msgid "operand out of range (%ld not between %ld and %lu)"
+msgstr "操作数越界(%ld 不在 %ld 和 %lu 之间)"
+
+#: fr30-ibld.c:181 frv-ibld.c:181 ip2k-ibld.c:181 iq2000-ibld.c:181
+#: m32r-ibld.c:181 openrisc-ibld.c:181 xstormy16-ibld.c:181
+#, c-format
+msgid "operand out of range (%lu not between 0 and %lu)"
+msgstr "操作数越界(%lu 不在 0 和 %lu 之间)"
+
+#: fr30-ibld.c:732 frv-ibld.c:858 ip2k-ibld.c:609 iq2000-ibld.c:715
+#: m32r-ibld.c:667 openrisc-ibld.c:635 xstormy16-ibld.c:680
+#, c-format
+msgid "Unrecognized field %d while building insn.\n"
+msgstr ""
+
+#: fr30-ibld.c:939 frv-ibld.c:1177 ip2k-ibld.c:686 iq2000-ibld.c:892
+#: m32r-ibld.c:806 openrisc-ibld.c:737 xstormy16-ibld.c:828
+#, c-format
+msgid "Unrecognized field %d while decoding insn.\n"
+msgstr ""
+
+#: fr30-ibld.c:1088 frv-ibld.c:1458 ip2k-ibld.c:763 iq2000-ibld.c:1026
+#: m32r-ibld.c:922 openrisc-ibld.c:817 xstormy16-ibld.c:941
+#, c-format
+msgid "Unrecognized field %d while getting int operand.\n"
+msgstr ""
+
+#: fr30-ibld.c:1217 frv-ibld.c:1719 ip2k-ibld.c:820 iq2000-ibld.c:1140
+#: m32r-ibld.c:1018 openrisc-ibld.c:877 xstormy16-ibld.c:1034
+#, c-format
+msgid "Unrecognized field %d while getting vma operand.\n"
+msgstr ""
+
+#: fr30-ibld.c:1351 frv-ibld.c:1989 ip2k-ibld.c:882 iq2000-ibld.c:1263
+#: m32r-ibld.c:1122 openrisc-ibld.c:946 xstormy16-ibld.c:1136
+#, c-format
+msgid "Unrecognized field %d while setting int operand.\n"
+msgstr ""
+
+#: fr30-ibld.c:1473 frv-ibld.c:2247 ip2k-ibld.c:932 iq2000-ibld.c:1374
+#: m32r-ibld.c:1214 openrisc-ibld.c:1003 xstormy16-ibld.c:1226
+#, c-format
+msgid "Unrecognized field %d while setting vma operand.\n"
+msgstr ""
+
+#: frv-asm.c:978
+msgid "register number must be even"
+msgstr "寄存器数必须是偶数"
+
+#: h8300-dis.c:358
+#, c-format
+msgid "Hmmmm 0x%x"
+msgstr "Hmmmm 0x%x"
+
+#: h8300-dis.c:744
+#, fuzzy, c-format
+msgid "Don't understand 0x%x \n"
+msgstr "不理解类型“%s”\n"
+
+#: h8500-dis.c:143
+#, fuzzy, c-format
+msgid "can't cope with insert %d\n"
+msgstr "用下列通配符插入文件(&M)："
+
+#. Couldn't understand anything.
+#: h8500-dis.c:342
+#, c-format
+msgid "%02x\t\t*unknown*"
+msgstr "%02x\t\t*未知*"
+
+#: i386-dis.c:1733
+msgid "<internal disassembler error>"
+msgstr "<反汇编器内部错误>"
+
+#: ia64-gen.c:297
+#, c-format
+msgid "%s: Error: "
+msgstr "%s：错误："
+
+#: ia64-gen.c:310
+#, c-format
+msgid "%s: Warning: "
+msgstr "%s：警告："
+
+#: ia64-gen.c:496 ia64-gen.c:730
+#, fuzzy, c-format
+msgid "multiple note %s not handled\n"
+msgstr "未处理 move 指令"
+
+#: ia64-gen.c:607
+msgid "can't find ia64-ic.tbl for reading\n"
+msgstr ""
+
+#: ia64-gen.c:812
+#, fuzzy, c-format
+msgid "can't find %s for reading\n"
+msgstr "无法打开 %1 进行读取"
+
+#: ia64-gen.c:1036
+#, c-format
+msgid ""
+"most recent format '%s'\n"
+"appears more restrictive than '%s'\n"
+msgstr ""
+
+#: ia64-gen.c:1047
+#, fuzzy, c-format
+msgid "overlapping field %s->%s\n"
+msgstr "域宽"
+
+#: ia64-gen.c:1244
+#, c-format
+msgid "overwriting note %d with note %d (IC:%s)\n"
+msgstr ""
+
+#: ia64-gen.c:1443
+#, c-format
+msgid "don't know how to specify %% dependency %s\n"
+msgstr "不知道如何指定 %% 依赖 %s\n"
+
+#: ia64-gen.c:1465
+#, c-format
+msgid "Don't know how to specify # dependency %s\n"
+msgstr "不知道如何指定 # 依赖 %s\n"
+
+#: ia64-gen.c:1504
+#, c-format
+msgid "IC:%s [%s] has no terminals or sub-classes\n"
+msgstr ""
+
+#: ia64-gen.c:1507
+#, c-format
+msgid "IC:%s has no terminals or sub-classes\n"
+msgstr ""
+
+#: ia64-gen.c:1516
+#, c-format
+msgid "no insns mapped directly to terminal IC %s [%s]"
+msgstr ""
+
+#: ia64-gen.c:1519
+#, c-format
+msgid "no insns mapped directly to terminal IC %s\n"
+msgstr ""
+
+#: ia64-gen.c:1530
+#, c-format
+msgid "class %s is defined but not used\n"
+msgstr ""
+
+#: ia64-gen.c:1541
+#, c-format
+msgid "Warning: rsrc %s (%s) has no chks%s\n"
+msgstr ""
+
+#: ia64-gen.c:1545
+#, fuzzy, c-format
+msgid "rsrc %s (%s) has no regs\n"
+msgstr "指数部分没有数字"
+
+#: ia64-gen.c:2444
+#, c-format
+msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n"
+msgstr ""
+
+#: ia64-gen.c:2472
+#, c-format
+msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n"
+msgstr ""
+
+#: ia64-gen.c:2486
+#, fuzzy, c-format
+msgid "opcode %s has no class (ops %d %d %d)\n"
+msgstr "尚未定义名为“%s”的 <draw_ops>"
+
+#: ia64-gen.c:2816
+#, c-format
+msgid "unable to change directory to \"%s\", errno = %s\n"
+msgstr "无法将当前目录切换至“%s”，errno = %s\n"
+
+#. We've been passed a w. Return with an error message so that
+#. cgen will try the next parsing option.
+#: ip2k-asm.c:92
+msgid "W keyword invalid in FR operand slot."
+msgstr ""
+
+#. Invalid offset present.
+#: ip2k-asm.c:117
+msgid "offset(IP) is not a valid form"
+msgstr ""
+
+#. Found something there in front of (DP) but it's out
+#. of range.
+#: ip2k-asm.c:165
+msgid "(DP) offset out of range."
+msgstr "(DP) 偏移量越界"
+
+#. Found something there in front of (SP) but it's out
+#. of range.
+#: ip2k-asm.c:206
+msgid "(SP) offset out of range."
+msgstr "(SP) 偏移量越界。"
+
+#: ip2k-asm.c:222
+msgid "illegal use of parentheses"
+msgstr "括号的使用非法"
+
+#: ip2k-asm.c:229
+#, fuzzy
+msgid "operand out of range (not between 1 and 255)"
+msgstr "操作数越界(%lu 不在 0 和 %lu 之间)"
+
+#. Something is very wrong. opindex has to be one of the above.
+#: ip2k-asm.c:254
+#, fuzzy
+msgid "parse_addr16: invalid opindex."
+msgstr "分析错误：非法 UTF-8 序列"
+
+#: ip2k-asm.c:309
+msgid "Byte address required. - must be even."
+msgstr ""
+
+#: ip2k-asm.c:318
+msgid "cgen_parse_address returned a symbol. Literal required."
+msgstr ""
+
+#: ip2k-asm.c:376
+#, fuzzy, c-format
+msgid "%operator operand is not a symbol"
+msgstr "使用寄存器栈传递参数和返回值"
+
+#: ip2k-asm.c:430
+msgid "Attempt to find bit index of 0"
+msgstr ""
+
+#: iq2000-asm.c:115 iq2000-asm.c:146
+msgid "immediate value cannot be register"
+msgstr "立即数不能是寄存器"
+
+#: iq2000-asm.c:126 iq2000-asm.c:156
+msgid "immediate value out of range"
+msgstr "立即数越界"
+
+#: iq2000-asm.c:185
+msgid "21-bit offset out of range"
+msgstr "21位长的偏移量越界"
+
+#: iq2000-asm.c:210 iq2000-asm.c:240 iq2000-asm.c:277 iq2000-asm.c:310
+#: openrisc-asm.c:90 openrisc-asm.c:144
+msgid "missing `)'"
+msgstr "缺少‘)’"
+
+#: m10200-dis.c:199
+#, c-format
+msgid "unknown\t0x%02x"
+msgstr "未知\t0x%02x"
+
+#: m10200-dis.c:339
+#, c-format
+msgid "unknown\t0x%04lx"
+msgstr "未知\t0x%04lx"
+
+#: m10300-dis.c:767
+#, c-format
+msgid "unknown\t0x%04x"
+msgstr "未知\t0x%04x"
+
+#: m68k-dis.c:295
+#, c-format
+msgid "<internal error in opcode table: %s %s>\n"
+msgstr "<操作数表中出现内部错误：%s %s>\n"
+
+#: m68k-dis.c:1089
+#, c-format
+msgid "<function code %d>"
+msgstr "<函数代码 %d>"
+
+#: m88k-dis.c:746
+#, fuzzy, c-format
+msgid "# <dis error: %08x>"
+msgstr "语法错误，非预期的 %s"
+
+#: mips-dis.c:720
+msgid "# internal error, incomplete extension sequence (+)"
+msgstr ""
+
+#: mips-dis.c:779
+#, c-format
+msgid "# internal error, undefined extension sequence (+%c)"
+msgstr ""
+
+#: mips-dis.c:1037
+#, c-format
+msgid "# internal error, undefined modifier(%c)"
+msgstr "# 内部错误，未定义的修饰符(%c)"
+
+#: mips-dis.c:1793
+#, c-format
+msgid "# internal disassembler error, unrecognised modifier (%c)"
+msgstr ""
+
+#: mips-dis.c:1805
+#, c-format
+msgid ""
+"\n"
+"The following MIPS specific disassembler options are supported for use\n"
+"with the -M switch (multiple options should be separated by commas):\n"
+msgstr ""
+
+#: mips-dis.c:1809
+#, c-format
+msgid ""
+"\n"
+" gpr-names=ABI Print GPR names according to specified ABI.\n"
+" Default: based on binary being disassembled.\n"
+msgstr ""
+"\n"
+" gpr-names=ABI 根据指定的 ABI 打印通用寄存器名。\n"
+" 默认：根据被反汇编的二进制文件。\n"
+
+#: mips-dis.c:1813
+#, c-format
+msgid ""
+"\n"
+" fpr-names=ABI Print FPR names according to specified ABI.\n"
+" Default: numeric.\n"
+msgstr ""
+"\n"
+" fpr-names=ABI 根据指定的 ABI 打印浮点寄存器名。\n"
+" 默认：数字。\n"
+
+#: mips-dis.c:1817
+#, c-format
+msgid ""
+"\n"
+" cp0-names=ARCH Print CP0 register names according to\n"
+" specified architecture.\n"
+" Default: based on binary being disassembled.\n"
+msgstr ""
+"\n"
+" cp0-names=ARCH 根据指定的架构打印 CP0 寄存器名。\n"
+" 默认：根据被反汇编的二进制代码。\n"
+
+#: mips-dis.c:1822
+#, c-format
+msgid ""
+"\n"
+" hwr-names=ARCH Print HWR names according to specified \n"
+"\t\t\t architecture.\n"
+" Default: based on binary being disassembled.\n"
+msgstr ""
+"\n"
+" hwr-names=ARCH 根据指定的架构打印 HWR 寄存器名。\n"
+" 默认：根据被反汇编的二进制代码。\n"
+
+#: mips-dis.c:1827
+#, c-format
+msgid ""
+"\n"
+" reg-names=ABI Print GPR and FPR names according to\n"
+" specified ABI.\n"
+msgstr ""
+"\n"
+" reg-names=ABI 根据指定的 ABI 打印通用寄存器和浮点寄存\n"
+" 器名。\n"
+
+#: mips-dis.c:1831
+#, c-format
+msgid ""
+"\n"
+" reg-names=ARCH Print CP0 register and HWR names according to\n"
+" specified architecture.\n"
+msgstr ""
+"\n"
+" reg-names=ARCH 根据指定的架构打印 CP0 和 HWR 寄存器名。\n"
+
+#: mips-dis.c:1835
+#, c-format
+msgid ""
+"\n"
+" For the options above, the following values are supported for \"ABI\":\n"
+" "
+msgstr ""
+
+#: mips-dis.c:1840 mips-dis.c:1848 mips-dis.c:1850
+#, c-format
+msgid "\n"
+msgstr "\n"
+
+#: mips-dis.c:1842
+#, c-format
+msgid ""
+"\n"
+" For the options above, The following values are supported for \"ARCH\":\n"
+" "
+msgstr ""
+
+#: mmix-dis.c:34
+#, fuzzy, c-format
+msgid "Bad case %d (%s) in %s:%d\n"
+msgstr "忽略大小写变化(&I)"
+
+#: mmix-dis.c:44
+#, c-format
+msgid "Internal: Non-debugged code (test-case missing): %s:%d"
+msgstr ""
+
+#: mmix-dis.c:53
+msgid "(unknown)"
+msgstr "(未知)"
+
+#: mmix-dis.c:519
+#, fuzzy, c-format
+msgid "*unknown operands type: %d*"
+msgstr "未知的签名类型‘%s’\n"
+
+#. I and Z are output operands and can`t be immediate
+#. * A is an address and we can`t have the address of
+#. * an immediate either. We don't know how much to increase
+#. * aoffsetp by since whatever generated this is broken
+#. * anyway!
+#.
+#: ns32k-dis.c:631
+#, c-format
+msgid "$<undefined>"
+msgstr "$<未定义>"
+
+#: ppc-opc.c:794 ppc-opc.c:822
+msgid "invalid conditional option"
+msgstr "无效的条件选项"
+
+#: ppc-opc.c:824
+msgid "attempt to set y bit when using + or - modifier"
+msgstr ""
+
+#: ppc-opc.c:852
+msgid "offset not a multiple of 16"
+msgstr "偏移量不是 16 的倍数"
+
+#: ppc-opc.c:871
+msgid "offset not a multiple of 2"
+msgstr "偏移量不是 2 的倍数"
+
+#: ppc-opc.c:873
+msgid "offset greater than 62"
+msgstr "偏移量大于 62"
+
+#: ppc-opc.c:892 ppc-opc.c:937 ppc-opc.c:981
+msgid "offset not a multiple of 4"
+msgstr "偏移量不是 4 的倍数"
+
+#: ppc-opc.c:894
+msgid "offset greater than 124"
+msgstr "偏移量大于 124"
+
+#: ppc-opc.c:913
+msgid "offset not a multiple of 8"
+msgstr "偏移量不是 8 的倍数"
+
+#: ppc-opc.c:915
+msgid "offset greater than 248"
+msgstr "偏移量大于 248"
+
+#: ppc-opc.c:958
+msgid "offset not between -2048 and 2047"
+msgstr "偏移量不在 -2048 和 2047 之间"
+
+#: ppc-opc.c:979
+msgid "offset not between -8192 and 8191"
+msgstr "偏移量不在 -8192 和 8191 之间"
+
+#: ppc-opc.c:1007
+msgid "invalid mask field"
+msgstr "无效的掩码字段"
+
+#: ppc-opc.c:1033
+#, fuzzy
+msgid "ignoring invalid mfcr mask"
+msgstr "忽略 schema 名称“%s”，无效：%s"
+
+#: ppc-opc.c:1075
+msgid "ignoring least significant bits in branch offset"
+msgstr ""
+
+#: ppc-opc.c:1105 ppc-opc.c:1140
+msgid "illegal bitmask"
+msgstr "非法的位掩码"
+
+#: ppc-opc.c:1205
+msgid "value out of range"
+msgstr "值越界"
+
+#: ppc-opc.c:1273
+#, fuzzy
+msgid "index register in load range"
+msgstr "初始值设定项中索引范围为空"
+
+#: ppc-opc.c:1289
+msgid "source and target register operands must be different"
+msgstr ""
+
+#: ppc-opc.c:1304
+msgid "invalid register operand when updating"
+msgstr ""
+
+#: ppc-opc.c:1343
+msgid "target register operand must be even"
+msgstr "目的寄存器操作数必须是偶数"
+
+#: ppc-opc.c:1357
+msgid "source register operand must be even"
+msgstr "源寄存器操作数必须是偶数"
+
+#. Mark as non-valid instruction.
+#: sparc-dis.c:760
+msgid "unknown"
+msgstr "未知"
+
+#: sparc-dis.c:835
+#, c-format
+msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
+msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"
+
+#: sparc-dis.c:846
+#, c-format
+msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
+msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"
+
+#: sparc-dis.c:895
+#, fuzzy, c-format
+msgid "Internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n"
+msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"
+
+#: v850-dis.c:225
+#, fuzzy, c-format
+msgid "unknown operand shift: %x\n"
+msgstr "PRINT_OPERAND：未知的标点‘%c’"
+
+#: v850-dis.c:237
+#, c-format
+msgid "unknown pop reg: %d\n"
+msgstr "未知的弹栈寄存器：%d\n"
+
+#. The functions used to insert and extract complicated operands.
+#. Note: There is a conspiracy between these functions and
+#. v850_insert_operand() in gas/config/tc-v850.c. Error messages
+#. containing the string 'out of range' will be ignored unless a
+#. specific command line option is given to GAS.
+#: v850-opc.c:69
+msgid "displacement value is not in range and is not aligned"
+msgstr ""
+
+#: v850-opc.c:70
+msgid "displacement value is out of range"
+msgstr "偏移值越界"
+
+#: v850-opc.c:71
+msgid "displacement value is not aligned"
+msgstr "偏移值未对齐"
+
+#: v850-opc.c:73
+msgid "immediate value is out of range"
+msgstr "立即数越界"
+
+#: v850-opc.c:84
+msgid "branch value not in range and to odd offset"
+msgstr "跳转越界且跳转偏移量为奇数"
+
+#: v850-opc.c:86 v850-opc.c:118
+msgid "branch value out of range"
+msgstr "跳转越界"
+
+#: v850-opc.c:89 v850-opc.c:121
+msgid "branch to odd offset"
+msgstr "跳转偏移量为奇数"
+
+#: v850-opc.c:116
+msgid "branch value not in range and to an odd offset"
+msgstr "跳转越界且跳转偏移量为奇数"
+
+#: v850-opc.c:347
+msgid "invalid register for stack adjustment"
+msgstr "用于调整堆栈的寄存器无效"
+
+#: v850-opc.c:371
+msgid "immediate value not in range and not even"
+msgstr "立即数越界且不是偶数"
+
+#: v850-opc.c:376
+msgid "immediate value must be even"
+msgstr "必须给出立即数"
+
+#: xstormy16-asm.c:76
+msgid "Bad register in preincrement"
+msgstr "前置自增中使用了错误的寄存器"
+
+#: xstormy16-asm.c:81
+msgid "Bad register in postincrement"
+msgstr "后置自增中使用了错误的寄存器"
+
+#: xstormy16-asm.c:83
+msgid "Bad register name"
+msgstr "错误的寄存器名"
+
+#: xstormy16-asm.c:87
+msgid "Label conflicts with register name"
+msgstr "标号与寄存器名冲突"
+
+#: xstormy16-asm.c:91
+msgid "Label conflicts with `Rx'"
+msgstr "标号与‘Rx’冲突"
+
+#: xstormy16-asm.c:93
+msgid "Bad immediate expression"
+msgstr "错误的立即数表达式"
+
+#: xstormy16-asm.c:115
+msgid "No relocation for small immediate"
+msgstr ""
+
+#: xstormy16-asm.c:125
+msgid "Small operand was not an immediate number"
+msgstr ""
+
+#: xstormy16-asm.c:164
+msgid "Operand is not a symbol"
+msgstr "操作数不是一个符号"
+
+#: xstormy16-asm.c:172
+msgid "Syntax error: No trailing ')'"
+msgstr "语法错误：没有结尾的‘)’"
OSDN Git Service
