arm64: dts: allwinner: h6: tanix-tx6: Add I2C node

Tanix TX6 has a LED display driven by FD650.

Currently there is no Linux driver nor any binding for it. However, we
can at least provide I2C node in DT, so user space scripts or programs
can manually control it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211121115002.693329-1-jernej.skrabec@gmail.com

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 6c10ff7..7c37aa4 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -32,6 +32,14 @@
                };
        };
 
+       /* used for FD650 LED display driver */
+       i2c {
+               compatible = "i2c-gpio";
+               sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+               scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+               i2c-gpio,delay-us = <5>;
+       };
+
        reg_vcc1v8: regulator-vcc1v8 {
                compatible = "regulator-fixed";
                regulator-name = "vcc1v8";