#ifdef PARITY
"PARITY "
#endif
-#ifdef PSEUDO_DMA
- "PSEUDO_DMA "
-#endif
"");
}
-#ifdef PSEUDO_DMA
-static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
- char *buffer, int length)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
- hostdata->spin_max_r = 0;
- hostdata->spin_max_w = 0;
- return 0;
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
- seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
- hostdata->spin_max_w, hostdata->spin_max_r);
- return 0;
-}
-#endif
-
/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
return -1;
}
-#if defined(PSEUDO_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
return foo;
}
-#endif /* PSEUDO_DMA */
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
* in an unconditional loop.
*/
-#if defined(PSEUDO_DMA)
transfersize = 0;
if (!cmd->device->borken)
transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
/* XXX - need to source or sink data here, as appropriate */
} else
cmd->SCp.this_residual -= transfersize - len;
- } else
-#endif /* PSEUDO_DMA */
- {
+ } else {
/* Break up transfer into 3 ms chunks,
* presuming 6 accesses per handshake.
*/
#ifdef SUPPORT_TAGS
struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
#endif
-#ifdef PSEUDO_DMA
- unsigned spin_max_r;
- unsigned spin_max_w;
-#endif
struct workqueue_struct *work_q;
unsigned long accesses_per_ms; /* chip register accesses per ms */
};
#include <scsi/scsi_host.h>
-#define PSEUDO_DMA
-
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_read(reg) cumanascsi_read(instance, reg)
#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value)
#include <scsi/scsi_host.h>
-/*#define PSEUDO_DMA*/
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_write(reg, value) \
writeb(value, priv(instance)->base + ((reg) << 2))
-#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
#define NCR5380_read(reg) inb(instance->io_port + reg)
#define NCR5380_write(reg, value) outb(value, instance->io_port + reg)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
+#define NCR5380_pread(instance, dst, len) (0)
+#define NCR5380_pwrite(instance, src, len) (0)
+
#define NCR5380_implementation_fields /* none */
#include "NCR5380.h"
-#define PSEUDO_DMA
#define DONT_USE_INTR
/*
while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
++i;
rtrc(0);
- if (i > hostdata->spin_max_r)
- hostdata->spin_max_r = i;
return (0);
}
rtrc(7);
/* Check for parity error here. fixme. */
rtrc(0);
- if (i > hostdata->spin_max_w)
- hostdata->spin_max_w = i;
return (0);
}
.detect = dtc_detect,
.release = dtc_release,
.proc_name = "dtc3x80",
- .show_info = dtc_show_info,
- .write_info = dtc_write_info,
.info = dtc_info,
.queuecommand = dtc_queue_command,
.eh_abort_handler = dtc_abort,
#define NCR5380_abort dtc_abort
#define NCR5380_bus_reset dtc_bus_reset
#define NCR5380_info dtc_info
-#define NCR5380_show_info dtc_show_info
-#define NCR5380_write_info dtc_write_info
/* 15 12 11 10
1001 1100 0000 0000 */
*/
#define AUTOPROBE_IRQ
-#define PSEUDO_DMA
#include <asm/io.h>
#include <linux/blkdev.h>
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
#define NCR5380_info generic_NCR5380_info
-#define NCR5380_show_info generic_NCR5380_show_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
/* Definitions for the core NCR5380 driver. */
-#define PSEUDO_DMA
-
#define NCR5380_implementation_fields unsigned char *pdma_base
#define NCR5380_read(reg) macscsi_read(instance, reg)
#define NCR5380_abort macscsi_abort
#define NCR5380_bus_reset macscsi_bus_reset
#define NCR5380_info macscsi_info
-#define NCR5380_show_info macscsi_show_info
-#define NCR5380_write_info macscsi_write_info
#include "NCR5380.h"
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
The code attempts to catch bus errors that occur if one for example
return 0;
}
-#endif
static int macscsi_dma_xfer_len(struct Scsi_Host *instance,
struct scsi_cmnd *cmd)
static struct scsi_host_template mac_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = macscsi_show_info,
- .write_info = macscsi_write_info,
.name = "Macintosh NCR5380 SCSI",
.info = macscsi_info,
.queuecommand = macscsi_queue_command,
if (!pio_mem)
return -ENODEV;
-#ifdef PSEUDO_DMA
pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-#endif
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-#define PSEUDO_DMA
-
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
*
P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) )
++ii;
instance->host_no);
return -1;
}
- if (ii > hostdata->spin_max_r)
- hostdata->spin_max_r = ii;
return 0;
}
register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) )
++ii;
instance->host_no);
return -1;
}
- if (ii > hostdata->spin_max_w)
- hostdata->spin_max_w = ii;
return 0;
}
.detect = pas16_detect,
.release = pas16_release,
.proc_name = "pas16",
- .show_info = pas16_show_info,
- .write_info = pas16_write_info,
.info = pas16_info,
.queuecommand = pas16_queue_command,
.eh_abort_handler = pas16_abort,
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
#define NCR5380_info pas16_info
-#define NCR5380_show_info pas16_show_info
-#define NCR5380_write_info pas16_write_info
/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */
-#define PSEUDO_DMA
-
/*
* Trantor T128/T128F/T228 driver
* Note : architecturally, the T100 and T130 are different and won't
.detect = t128_detect,
.release = t128_release,
.proc_name = "t128",
- .show_info = t128_show_info,
- .write_info = t128_write_info,
.info = t128_info,
.queuecommand = t128_queue_command,
.eh_abort_handler = t128_abort,
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
#define NCR5380_info t128_info
-#define NCR5380_show_info t128_show_info
-#define NCR5380_write_info t128_write_info
/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */