uart6850= [HW,OSS]
Format: <io>,<irq>
+ uhci-hcd.ignore_oc=
+ [USB] Ignore overcurrent events (default N).
+ Some badly-designed motherboards generate lots of
+ bogus events, for ports that aren't wired to
+ anything. Set this parameter to avoid log spamming.
+ Note that genuine overcurrent events won't be
+ reported either.
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
+S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
-P: Roman Weissgaerber
-M: weissg@vienna.at
+P: David Brownell
+M: dbrownell@users.sourceforge.net
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
+S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
+ { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_WRONG_SCO_MTU },
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
struct usblp {
struct usb_device *dev; /* USB device */
- struct semaphore sem; /* locks this struct, especially "dev" */
+ struct mutex mut; /* locks this struct, especially "dev" */
char *writebuf; /* write transfer_buffer */
char *readbuf; /* read transfer_buffer */
char *statusbuf; /* status transfer_buffer */
int twoints[2];
int retval = 0;
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
if (!usblp->present) {
retval = -ENODEV;
goto done;
}
done:
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return retval;
}
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- int timeout, rv, err = 0, transfer_length = 0;
+ int timeout, intr, rv, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
if (rv < 0)
return writecount ? writecount : -EINTR;
}
- down (&usblp->sem);
+ intr = mutex_lock_interruptible (&usblp->mut);
+ if (intr)
+ return writecount ? writecount : -EINTR;
if (!usblp->present) {
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return -ENODEV;
}
if (usblp->sleeping) {
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return writecount ? writecount : -ENODEV;
}
err = usblp->writeurb->status;
} else
err = usblp_check_status(usblp, err);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
/* if the fault was due to disconnect, let khubd's
- * call to usblp_disconnect() grab usblp->sem ...
+ * call to usblp_disconnect() grab usblp->mut ...
*/
schedule ();
continue;
*/
writecount += transfer_length;
if (writecount == count) {
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
break;
}
if (copy_from_user(usblp->writeurb->transfer_buffer,
buffer + writecount, transfer_length)) {
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
return writecount ? writecount : -EFAULT;
}
count = -EIO;
else
count = writecount ? writecount : -ENOMEM;
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
break;
}
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
}
return count;
static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- int rv;
+ int rv, intr;
if (!usblp->bidir)
return -EINVAL;
- down (&usblp->sem);
+ intr = mutex_lock_interruptible (&usblp->mut);
+ if (intr)
+ return -EINTR;
if (!usblp->present) {
count = -ENODEV;
goto done;
count = -EAGAIN;
goto done;
}
- up(&usblp->sem);
+ mutex_unlock(&usblp->mut);
rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present);
- down(&usblp->sem);
+ mutex_lock(&usblp->mut);
if (rv < 0) {
count = -EINTR;
goto done;
}
done:
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
return count;
}
goto abort;
}
usblp->dev = dev;
- init_MUTEX (&usblp->sem);
+ mutex_init (&usblp->mut);
init_waitqueue_head(&usblp->wait);
usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usblp->intf = intf;
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
usblp->present = 0;
usb_set_intfdata (intf, NULL);
usblp->writebuf, usblp->writeurb->transfer_dma);
usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
usblp->readbuf, usblp->readurb->transfer_dma);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
if (!usblp->used)
usblp_cleanup (usblp);
/* this races against normal access and open */
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
/* we take no more IO */
usblp->sleeping = 1;
usblp_unlink_urbs(usblp);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
mutex_unlock (&usblp_mutex);
return 0;
int r;
mutex_lock (&usblp_mutex);
- down (&usblp->sem);
+ mutex_lock (&usblp->mut);
usblp->sleeping = 0;
r = handle_bidir (usblp);
- up (&usblp->sem);
+ mutex_unlock (&usblp->mut);
mutex_unlock (&usblp_mutex);
return r;
kfree(dr);
return -EFAULT;
}
- snoop(&ps->dev->dev, "control urb\n");
+ snoop(&ps->dev->dev, "control urb: bRequest=%02x "
+ "bRrequestType=%02x wValue=%04x "
+ "wIndex=%04x wLength=%04x\n",
+ dr->bRequest, dr->bRequestType, dr->wValue,
+ dr->wIndex, dr->wLength);
break;
case USBDEVFS_URB_TYPE_BULK:
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/at91sam9261_matrix.h>
#include "at91_udc.h"
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
-/*-------------------------------------------------------------------------*/
-/*
- * Read from a UDP register.
- */
-static inline unsigned long at91_udp_read(unsigned int reg)
-{
- void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
-
- return __raw_readl(udp_base + reg);
-}
-
-/*
- * Write to a UDP register.
- */
-static inline void at91_udp_write(unsigned int reg, unsigned long value)
-{
- void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
-
- __raw_writel(value, udp_base + reg);
-}
+#define at91_udp_read(dev, reg) \
+ __raw_readl((dev)->udp_baseaddr + (reg))
+#define at91_udp_write(dev, reg, val) \
+ __raw_writel((val), (dev)->udp_baseaddr + (reg))
/*-------------------------------------------------------------------------*/
return 0;
}
- tmp = at91_udp_read(AT91_UDP_FRM_NUM);
+ tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM);
seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp,
(tmp & AT91_UDP_FRM_OK) ? " ok" : "",
(tmp & AT91_UDP_FRM_ERR) ? " err" : "",
(tmp & AT91_UDP_NUM));
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp,
(tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "",
(tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "",
(tmp & AT91_UDP_CONFG) ? " confg" : "",
(tmp & AT91_UDP_FADDEN) ? " fadden" : "");
- tmp = at91_udp_read(AT91_UDP_FADDR);
+ tmp = at91_udp_read(udc, AT91_UDP_FADDR);
seq_printf(s, "faddr %03x:%s fadd=%d\n", tmp,
(tmp & AT91_UDP_FEN) ? " fen" : "",
(tmp & AT91_UDP_FADD));
- proc_irq_show(s, "imr ", at91_udp_read(AT91_UDP_IMR));
- proc_irq_show(s, "isr ", at91_udp_read(AT91_UDP_ISR));
+ proc_irq_show(s, "imr ", at91_udp_read(udc, AT91_UDP_IMR));
+ proc_irq_show(s, "isr ", at91_udp_read(udc, AT91_UDP_ISR));
if (udc->enabled && udc->vbus) {
proc_ep_show(s, &udc->ep[0]);
static void done(struct at91_ep *ep, struct at91_request *req, int status)
{
unsigned stopped = ep->stopped;
+ struct at91_udc *udc = ep->udc;
list_del_init(&req->queue);
if (req->req.status == -EINPROGRESS)
/* ep0 is always ready; other endpoints need a non-empty queue */
if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
- at91_udp_write(AT91_UDP_IDR, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
}
/*-------------------------------------------------------------------------*/
* reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
* since endpoint resets don't reset hw pingpong state.
*/
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(dev, AT91_UDP_RST_EP, 0);
local_irq_restore(flags);
return 0;
static int at91_ep_disable (struct usb_ep * _ep)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *udc = ep->udc;
unsigned long flags;
if (ep == &ep->udc->ep[0])
/* reset fifos and endpoint */
if (ep->udc->clocked) {
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
__raw_writel(0, ep->creg);
}
* reconfigures the endpoints.
*/
if (dev->wait_for_config_ack) {
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
tmp ^= AT91_UDP_CONFG;
VDBG("toggle config\n");
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
}
if (req->req.length == 0) {
ep0_in_status:
if (req && !status) {
list_add_tail (&req->queue, &ep->queue);
- at91_udp_write(AT91_UDP_IER, ep->int_mask);
+ at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
}
done:
local_irq_restore(flags);
static int at91_ep_set_halt(struct usb_ep *_ep, int value)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *udc = ep->udc;
u32 __iomem *creg;
u32 csr;
unsigned long flags;
csr |= AT91_UDP_FORCESTALL;
VDBG("halt %s\n", ep->ep.name);
} else {
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
csr &= ~AT91_UDP_FORCESTALL;
}
__raw_writel(csr, creg);
static int at91_get_frame(struct usb_gadget *gadget)
{
+ struct at91_udc *udc = to_udc(gadget);
+
if (!to_udc(gadget)->clocked)
return -EINVAL;
- return at91_udp_read(AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
+ return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
}
static int at91_wakeup(struct usb_gadget *gadget)
/* NOTE: some "early versions" handle ESR differently ... */
- glbstate = at91_udp_read(AT91_UDP_GLB_STAT);
+ glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT);
if (!(glbstate & AT91_UDP_ESR))
goto done;
glbstate |= AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, glbstate);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
done:
local_irq_restore(flags);
ep->stopped = 0;
ep->fifo_bank = 0;
ep->ep.maxpacket = ep->maxpacket;
+ ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
// initialiser une queue par endpoint
INIT_LIST_HEAD(&ep->queue);
}
if (!udc->enabled || !udc->vbus)
is_on = 0;
DBG("%sactive\n", is_on ? "" : "in");
+
if (is_on) {
clk_on(udc);
- at91_udp_write(AT91_UDP_TXVC, 0);
- at91_set_gpio_value(udc->board.pullup_pin, 1);
- } else {
+ at91_udp_write(udc, AT91_UDP_TXVC, 0);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 1);
+ else if (cpu_is_at91sam9260()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ txvc |= AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ } else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr |= AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ }
+ } else {
stop_activity(udc);
- at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- at91_set_gpio_value(udc->board.pullup_pin, 0);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ if (cpu_is_at91rm9200())
+ at91_set_gpio_value(udc->board.pullup_pin, 0);
+ else if (cpu_is_at91sam9260()) {
+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+ txvc &= ~AT91_UDP_TXVC_PUON;
+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+ } else if (cpu_is_at91sam9261()) {
+ u32 usbpucr;
+
+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ }
clk_off(udc);
}
}
// VDBG("vbus %s\n", is_active ? "on" : "off");
local_irq_save(flags);
udc->vbus = (is_active != 0);
- pullup(udc, is_active);
+ if (udc->driver)
+ pullup(udc, is_active);
+ else
+ pullup(udc, 0);
local_irq_restore(flags);
return 0;
}
case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_SET_CONFIGURATION:
- tmp = at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
if (pkt.r.wValue)
udc->wait_for_config_ack = (tmp == 0);
else
case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_GET_STATUS:
tmp = (udc->selfpowered << USB_DEVICE_SELF_POWERED);
- if (at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
+ if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
PACKET("get device status\n");
__raw_writeb(tmp, dreg);
| USB_REQ_SET_FEATURE:
if (w_value != USB_DEVICE_REMOTE_WAKEUP)
goto stall;
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp |= AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
goto succeed;
case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
| USB_REQ_CLEAR_FEATURE:
if (w_value != USB_DEVICE_REMOTE_WAKEUP)
goto stall;
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_ESR;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
goto succeed;
/*
} else if (ep->is_in)
goto stall;
- at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
tmp = __raw_readl(ep->creg);
tmp |= CLR_FX;
tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
#undef w_length
/* pass request up to the gadget driver */
- status = udc->driver->setup(&udc->gadget, &pkt.r);
+ if (udc->driver)
+ status = udc->driver->setup(&udc->gadget, &pkt.r);
+ else
+ status = -ENODEV;
if (status < 0) {
stall:
VDBG("req %02x.%02x protocol STALL; stat %d\n",
if (udc->wait_for_addr_ack) {
u32 tmp;
- at91_udp_write(AT91_UDP_FADDR,
+ at91_udp_write(udc, AT91_UDP_FADDR,
AT91_UDP_FEN | udc->addr);
- tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_FADDEN;
if (udc->addr)
tmp |= AT91_UDP_FADDEN;
- at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
udc->wait_for_addr_ack = 0;
VDBG("address %d\n", udc->addr);
while (rescans--) {
u32 status;
- status = at91_udp_read(AT91_UDP_ISR)
- & at91_udp_read(AT91_UDP_IMR);
+ status = at91_udp_read(udc, AT91_UDP_ISR)
+ & at91_udp_read(udc, AT91_UDP_IMR);
if (!status)
break;
/* USB reset irq: not maskable */
if (status & AT91_UDP_ENDBUSRES) {
- at91_udp_write(AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
- at91_udp_write(AT91_UDP_IER, MINIMUS_INTERRUPTUS);
+ at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
+ at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS);
/* Atmel code clears this irq twice */
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
VDBG("end bus reset\n");
udc->addr = 0;
stop_activity(udc);
/* enable ep0 */
- at91_udp_write(AT91_UDP_CSR(0),
+ at91_udp_write(udc, AT91_UDP_CSR(0),
AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
udc->gadget.speed = USB_SPEED_FULL;
udc->suspended = 0;
- at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0));
/*
* NOTE: this driver keeps clocks off unless the
/* host initiated suspend (3+ms bus idle) */
} else if (status & AT91_UDP_RXSUSP) {
- at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXSUSP);
- at91_udp_write(AT91_UDP_IER, AT91_UDP_RXRSM);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
// VDBG("bus suspend\n");
if (udc->suspended)
continue;
/* host initiated resume */
} else if (status & AT91_UDP_RXRSM) {
- at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXRSM);
- at91_udp_write(AT91_UDP_IER, AT91_UDP_RXSUSP);
- at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
+ at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
+ at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
// VDBG("bus resume\n");
if (!udc->suspended)
continue;
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(0)),
.int_mask = 1 << 0,
},
.ep[1] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(1)),
.int_mask = 1 << 1,
},
.ep[2] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(2)),
.int_mask = 1 << 2,
},
.ep[3] = {
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(3)),
.int_mask = 1 << 3,
},
.ep[4] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(4)),
.int_mask = 1 << 4,
},
.ep[5] = {
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP
- + AT91_UDP_CSR(5)),
.int_mask = 1 << 5,
},
/* ep6 and ep7 are also reserved (custom silicon might use them) */
int retval;
if (!driver
- || driver->speed != USB_SPEED_FULL
+ || driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->setup) {
DBG("bad parameter.\n");
return -EINVAL;
if (retval) {
DBG("driver->bind() returned %d\n", retval);
udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
+ udc->gadget.dev.driver_data = NULL;
+ udc->enabled = 0;
+ udc->selfpowered = 0;
return retval;
}
{
struct at91_udc *udc = &controller;
- if (!driver || driver != udc->driver)
+ if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
local_irq_disable();
udc->enabled = 0;
- at91_udp_write(AT91_UDP_IDR, ~0);
+ at91_udp_write(udc, AT91_UDP_IDR, ~0);
pullup(udc, 0);
local_irq_enable();
struct device *dev = &pdev->dev;
struct at91_udc *udc;
int retval;
+ struct resource *res;
if (!dev->platform_data) {
/* small (so we copy it) but critical! */
return -ENODEV;
}
- if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start,
+ res->end - res->start + 1,
+ driver_name)) {
DBG("someone's using UDC memory\n");
return -EBUSY;
}
udc->gadget.dev.parent = dev;
udc->board = *(struct at91_udc_data *) dev->platform_data;
udc->pdev = pdev;
- udc_reinit(udc);
udc->enabled = 0;
+ udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
+ if (!udc->udp_baseaddr) {
+ release_mem_region(res->start, res->end - res->start + 1);
+ return -ENOMEM;
+ }
+
+ udc_reinit(udc);
+
/* get interface and function clocks */
udc->iclk = clk_get(dev, "udc_clk");
udc->fclk = clk_get(dev, "udpck");
if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
DBG("clocks missing\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto fail0;
}
retval = device_register(&udc->gadget.dev);
/* don't do anything until we have both gadget driver and VBUS */
clk_enable(udc->iclk);
- at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
- at91_udp_write(AT91_UDP_IDR, 0xffffffff);
+ at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
+ /* Clear all pending interrupts - UDP may be used by bootloader. */
+ at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
clk_disable(udc->iclk);
/* request UDC and maybe VBUS irqs */
goto fail1;
}
if (udc->board.vbus_pin > 0) {
+ /*
+ * Get the initial state of VBUS - we cannot expect
+ * a pending interrupt.
+ */
+ udc->vbus = at91_get_gpio_value(udc->board.vbus_pin);
if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
fail1:
device_unregister(&udc->gadget.dev);
fail0:
- release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
+ release_mem_region(res->start, res->end - res->start + 1);
DBG("%s probe failed, %d\n", driver_name, retval);
return retval;
}
static int __devexit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
+ struct resource *res;
DBG("remove\n");
- pullup(udc, 0);
+ if (udc->driver)
+ return -EBUSY;
- if (udc->driver != 0)
- usb_gadget_unregister_driver(udc->driver);
+ pullup(udc, 0);
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
free_irq(udc->board.vbus_pin, udc);
free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
- release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
+
+ iounmap(udc->udp_baseaddr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
clk_put(udc->iclk);
clk_put(udc->fclk);
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
-#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
+#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
-#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
+#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
-
+#define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */
/*-------------------------------------------------------------------------*/
struct clk *iclk, *fclk;
struct platform_device *pdev;
struct proc_dir_entry *pde;
+ void __iomem *udp_baseaddr;
int udp_irq;
};
return -EINVAL;
if (dum->driver)
return -EBUSY;
- if (!driver->bind || !driver->unbind || !driver->setup
+ if (!driver->bind || !driver->setup
|| driver->speed == USB_SPEED_UNKNOWN)
return -EINVAL;
err_bind_driver:
driver_unregister (&driver->driver);
err_register:
- driver->unbind (&dum->gadget);
+ if (driver->unbind)
+ driver->unbind (&dum->gadget);
spin_lock_irq (&dum->lock);
dum->pullup = 0;
set_link_state (dum);
if (!dum)
return -ENODEV;
- if (!driver || driver != dum->driver)
+ if (!driver || driver != dum->driver || !driver->unbind)
return -EINVAL;
dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n",
#endif
.function = (char *) longname,
.bind = fsg_bind,
- .unbind = __exit_p(fsg_unbind),
+ .unbind = fsg_unbind,
.disconnect = fsg_disconnect,
.setup = fsg_setup,
.suspend = fsg_suspend,
struct usb_request *req; /* for control responses */
u8 config;
struct usb_ep *in_ep, *out_ep;
- struct snd_card *card;
+ struct snd_card *card;
struct snd_rawmidi *rmidi;
struct snd_rawmidi_substream *in_substream;
struct snd_rawmidi_substream *out_substream;
int status = req->status;
switch (status) {
- case 0: /* normal completion */
+ case 0: /* normal completion */
if (ep == dev->out_ep) {
/* we received stuff.
req is queued again, below */
break;
/* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
+ default: speed = "?"; break;
}
dev->config = number;
.speed = USB_SPEED_FULL,
.function = (char *)longname,
.bind = gmidi_bind,
- .unbind = __exit_p(gmidi_unbind),
+ .unbind = gmidi_unbind,
.setup = gmidi_setup,
.disconnect = gmidi_disconnect,
.suspend = gmidi_suspend,
.resume = gmidi_resume,
- .driver = {
+ .driver = {
.name = (char *)shortname,
.owner = THIS_MODULE,
},
if (!driver
|| driver->speed != USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
struct goku_udc *dev = pci_get_drvdata(pdev);
DBG(dev, "%s\n", __FUNCTION__);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN(dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver(dev->driver);
- }
+
+ BUG_ON(dev->driver);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
remove_proc_entry(proc_node_name, NULL);
DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name);
if (!driver
- || driver->speed != USB_SPEED_FULL
- || !driver->bind
- || !driver->unbind || !driver->disconnect || !driver->setup)
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->disconnect
+ || !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
DEBUG("%s: %p\n", __FUNCTION__, pdev);
+ if (dev->driver)
+ return -EBUSY;
+
udc_disable(dev);
remove_proc_files();
- usb_gadget_unregister_driver(dev->driver);
free_irq(IRQ_USBINTR, dev);
if (!driver
|| driver->speed != USB_SPEED_HIGH
|| !driver->bind
- || !driver->unbind
|| !driver->setup)
return -EINVAL;
if (!dev)
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave (&dev->lock, flags);
{
struct net2280 *dev = pci_get_drvdata (pdev);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN (dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver (dev->driver);
- }
+ BUG_ON(dev->driver);
/* then clean up the resources we allocated during probe() */
net2280_led_shutdown (dev);
// FIXME if otg, check: driver->is_otg
|| driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->setup)
return -EINVAL;
status = otg_set_peripheral(udc->transceiver, &udc->gadget);
if (status < 0) {
ERR("can't bind to transceiver\n");
- driver->unbind (&udc->gadget);
- udc->gadget.dev.driver = NULL;
- udc->driver = NULL;
+ if (driver->unbind) {
+ driver->unbind (&udc->gadget);
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
+ }
goto done;
}
} else {
if (!udc)
return -ENODEV;
- if (!driver || driver != udc->driver)
+ if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
if (machine_is_omap_innovator() || machine_is_omap_osk())
if (!udc)
return -ENODEV;
+ if (udc->driver)
+ return -EBUSY;
udc->done = &done;
if (!driver
|| driver->speed < USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
local_irq_disable();
{
struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
+ if (dev->driver)
+ return -EBUSY;
+
udc_disable(dev);
remove_proc_files();
- usb_gadget_unregister_driver(dev->driver);
if (dev->got_irq) {
free_irq(IRQ_USB, dev);
#endif /* CONFIG_USB_GADGET_DUALSPEED */
.function = GS_LONG_NAME,
.bind = gs_bind,
- .unbind = __exit_p(gs_unbind),
+ .unbind = gs_unbind,
.setup = gs_setup,
.disconnect = gs_disconnect,
.driver = {
{
struct at91_usbh_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- struct usb_device *root = hcd->self.root_hub;
int ret;
if ((ret = ohci_init(ohci)) < 0)
*/
.start = ohci_at91_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.start = ohci_au1xxx_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_au1xxx_driver = {
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
.driver = {
case PIPE_CONTROL: temp = "ctrl"; break; \
case PIPE_BULK: temp = "bulk"; break; \
case PIPE_INTERRUPT: temp = "intr"; break; \
- default: temp = "isoc"; break; \
+ default: temp = "isoc"; break; \
}; temp;})
#define pipestring(pipe) edstring(usb_pipetype(pipe))
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
(info & ED_SKIP) ? " K" : "",
(ed->hwHeadP &
cpu_to_hc32(ohci, ED_H)) ?
- " H" : "");
+ " H" : "");
size -= temp;
next += temp;
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_hcd_ep93xx_drv_suspend,
.resume = ohci_hcd_ep93xx_drv_resume,
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
- *
+ *
+ *
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
* interfaces (though some non-x86 Intel chips use it). It supports
* smarter hardware than UHCI. A download link for the spec available
* through the http://www.usb.org website.
*
- * History:
- *
- * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
- * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
- * 2003/02/24 show registers in sysfs (Kevin Brosius)
- *
- * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
- * bandwidth accounting; if debugging, show schedules in driverfs
- * 2002/07/19 fixes to management of ED and schedule state.
- * 2002/06/09 SA-1111 support (Christopher Hoover)
- * 2002/06/01 remember frame when HC won't see EDs any more; use that info
- * to fix urb unlink races caused by interrupt latency assumptions;
- * minor ED field and function naming updates
- * 2002/01/18 package as a patch for 2.5.3; this should match the
- * 2.4.17 kernel modulo some bugs being fixed.
- *
- * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
- * from post-2.4.5 patches.
- * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
- * 2001/09/07 match PCI PM changes, errnos from Linus' tree
- * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
- * pbook pci quirks gone (please fix pbook pci sw!) (db)
- *
- * 2001/04/08 Identify version on module load (gb)
- * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
- pci_map_single (db)
- * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
- * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
- *
- * 2000/09/26 fixed races in removing the private portion of the urb
- * 2000/09/07 disable bulk and control lists when unlinking the last
- * endpoint descriptor in order to avoid unrecoverable errors on
- * the Lucent chips. (rwc@sgi)
- * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
- * urb unlink probs, indentation fixes
- * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
- * device unplugs.
- * 2000/06/28 use PCI hotplug framework, for better power management
- * and for Cardbus support (David Brownell)
- * 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling
- * when the controller loses power; handle UE; cleanup; ...
- *
- * v5.2 1999/12/07 URB 3rd preview,
- * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
- * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
- * i386: HUB, Keyboard, Mouse, Printer
- *
- * v4.3 1999/10/27 multiple HCs, bulk_request
- * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
- * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
- * v4.0 1999/08/18
- * v3.0 1999/06/25
- * v2.1 1999/05/09 code clean up
- * v2.0 1999/05/04
- * v1.0 1999/04/27 initial release
- *
* This file is licenced under the GPL.
*/
-
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
int i, size = 0;
unsigned long flags;
int retval = 0;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "SUB", usb_pipein (pipe));
#endif
-
+
/* every endpoint has a ed, locate and maybe (re)initialize it */
if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
return -ENOMEM;
memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
INIT_LIST_HEAD (&urb_priv->pending);
urb_priv->length = size;
- urb_priv->ed = ed;
+ urb_priv->ed = ed;
/* allocate the TDs (deferring hash chain updates) */
for (i = 0; i < size; i++) {
urb_free_priv (ohci, urb_priv);
return -ENOMEM;
}
- }
+ }
spin_lock_irqsave (&ohci->lock, flags);
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "UNLINK", 1);
-#endif
+#endif
spin_lock_irqsave (&ohci->lock, flags);
- if (HC_IS_RUNNING(hcd->state)) {
+ if (HC_IS_RUNNING(hcd->state)) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
/* Start an OHCI controller, set the BUS operational
* resets USB and controller
- * enable interrupts
+ * enable interrupts
*/
static int ohci_run (struct ohci_hcd *ohci)
{
- u32 mask, temp;
+ u32 mask, temp;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
/* also: power/overcurrent flags in roothub.a */
}
- /* Reset USB nearly "by the book". RemoteWakeupConnected was
+ /* Reset USB nearly "by the book". RemoteWakeupConnected was
* saved if boot firmware (BIOS/SMM/...) told us it's connected,
* or if bus glue did the same (e.g. for PCI add-in cards with
* PCI PM support).
dl_done_list (ohci);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
}
-
+
/* could track INTR_SO to reduce available PCI/... bandwidth */
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
finish_unlinks (ohci, ohci_frame_no(ohci));
if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
&& HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
+ ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state)) {
ohci_writel (ohci, ints, ®s->intrstatus);
- ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
}
/*-------------------------------------------------------------------------*/
static void ohci_stop (struct usb_hcd *hcd)
-{
+{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
remove_debug_files (ohci);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
- dma_free_coherent (hcd->self.controller,
- sizeof *ohci->hcca,
+ dma_free_coherent (hcd->self.controller,
+ sizeof *ohci->hcca,
ohci->hcca, ohci->hcca_dma);
ohci->hcca = NULL;
ohci->hcca_dma = 0;
* recycle any "live" eds/tds (and urbs) right away.
* later, khubd disconnect processing will recycle the other state,
* (either as disconnect/reconnect, or maybe someday as a reset).
- */
+ */
spin_lock_irq(&ohci->lock);
disable (ohci);
usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
/* empty the interrupt branches */
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
-
+
/* no EDs to remove */
ohci->ed_rm_list = NULL;
- /* empty control and bulk lists */
+ /* empty control and bulk lists */
ohci->ed_controltail = NULL;
ohci->ed_bulktail = NULL;
#include "ohci-au1xxx.c"
#endif
+#ifdef CONFIG_PNX8550
+#include "ohci-pnx8550.c"
+#endif
+
#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
#include "ohci-ppc-soc.c"
#endif
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under GPL
*/
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
temp = 0;
if (rh & RH_A_NPS) /* no power switching? */
temp |= 0x0002;
- if (rh & RH_A_PSM) /* per-port power switching? */
+ if (rh & RH_A_PSM) /* per-port power switching? */
temp |= 0x0001;
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
temp |= 0x0010;
#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
/* called from some task, normally khubd */
-static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
+static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
u32 temp;
/* spin until any current reset finishes */
for (;;) {
temp = ohci_readl (ohci, portstat);
+ /* handle e.g. CardBus eject */
+ if (temp == ~(u32)0)
+ return -ESHUTDOWN;
if (!(temp & RH_PS_PRS))
break;
udelay (500);
- }
+ }
if (!(temp & RH_PS_CCS))
break;
now = ohci_readl(ohci, &ohci->regs->fmnumber);
} while (tick_before(now, reset_done));
/* caller synchronizes using PRSC */
+
+ return 0;
}
static int ohci_hub_control (
&ohci->regs->roothub.portstatus [wIndex]);
break;
case USB_PORT_FEAT_RESET:
- root_port_reset (ohci, wIndex);
+ retval = root_port_reset (ohci, wIndex);
break;
default:
goto error;
CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
udelay(1000);
USBH_CMDSTATUS = OHCI_HCR;
-
+
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
}
retval = -EBUSY;
goto err1;
}
-
+
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
*/
.start = ohci_lh7a404_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_lh7a404_driver = {
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_lh7a404_drv_suspend, */
/*.resume = ohci_hcd_lh7a404_drv_resume, */
.driver = {
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
/*-------------------------------------------------------------------------*/
/*
- * There's basically three types of memory:
+ * OHCI deals with three types of memory:
* - data used only by the HCD ... kmalloc is fine
* - async and periodic schedules, shared by HC and HCD ... these
* need to use dma_pool or dma_alloc_coherent
* - driver buffers, read/written by HC ... the hcd glue or the
* device driver provides us with dma addresses
*
- * There's also PCI "register" data, which is memory mapped.
- * No memory seen by this driver is pagable.
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
*/
/*-------------------------------------------------------------------------*/
.reset = ohci_omap_init,
.start = ohci_omap_start,
.stop = ohci_omap_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_omap_driver = {
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_omap_suspend,
.resume = ohci_omap_resume,
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
+ *
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
-
+
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
pci_dev_put(b);
}
- /* Check for Compaq's ZFMicro chipset, which needs short
+ /* Check for Compaq's ZFMicro chipset, which needs short
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
.shutdown = usb_hcd_pci_shutdown,
};
-
-static int __init ohci_hcd_pci_init (void)
+
+static int __init ohci_hcd_pci_init (void)
{
printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
if (usb_disabled())
/*-------------------------------------------------------------------------*/
-static void __exit ohci_hcd_pci_cleanup (void)
-{
+static void __exit ohci_hcd_pci_cleanup (void)
+{
pci_unregister_driver (&ohci_pci_driver);
}
module_exit (ohci_hcd_pci_cleanup);
* driver for Philips PNX4008 USB Host
*
* Authors: Dmitry Chigirev <source@mvista.com>
- * Vitaly Wool <vitalywool@gmail.com>
+ * Vitaly Wool <vitalywool@gmail.com>
*
* register initialization is based on code examples provided by Philips
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
#include <asm/arch/irqs.h>
#include <asm/arch/gpio.h>
-#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
--- /dev/null
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ *
+ * Bus Glue for PNX8550
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ * by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
+ * by Vitaly Wool <vitalywool@gmail.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/mach-pnx8550/usb.h>
+#include <asm/mach-pnx8550/int.h>
+#include <asm/mach-pnx8550/pci.h>
+
+#ifndef CONFIG_PNX8550
+#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined."
+#endif
+
+extern int usb_disabled(void);
+
+/*-------------------------------------------------------------------------*/
+
+static void pnx8550_start_hc(struct platform_device *dev)
+{
+ /*
+ * Set register CLK48CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x0004770c);
+
+ /*
+ * Set register CLK12CTL to enable and 48MHz
+ */
+ outl(0x00000003, PCI_BASE | 0x00047710);
+
+ udelay(100);
+}
+
+static void pnx8550_stop_hc(struct platform_device *dev)
+{
+ udelay(10);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/**
+ * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
+ struct platform_device *dev)
+{
+ int retval;
+ struct usb_hcd *hcd;
+
+ if (dev->resource[0].flags != IORESOURCE_MEM ||
+ dev->resource[1].flags != IORESOURCE_IRQ) {
+ dev_err (&dev->dev,"invalid resource type\n");
+ return -ENOMEM;
+ }
+
+ hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
+ if (!hcd)
+ return -ENOMEM;
+ hcd->rsrc_start = dev->resource[0].start;
+ hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
+ "failed\n", hcd->rsrc_start, hcd->rsrc_len);
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
+ hcd->rsrc_start, hcd->rsrc_len);
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ pnx8550_start_hc(dev);
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ if (retval == 0)
+ return retval;
+
+ pnx8550_stop_hc(dev);
+ iounmap(hcd->regs);
+ err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err1:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ */
+void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+ usb_remove_hcd(hcd);
+ pnx8550_stop_hc(dev);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __devinit
+ohci_pnx8550_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
+
+ ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run (ohci)) < 0) {
+ err ("can't start %s", hcd->self.bus_name);
+ ohci_stop (hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_pnx8550_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "PNX8550 OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_pnx8550_start,
+ .stop = ohci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
+ return ret;
+}
+
+static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_hcd_pnx8550_remove(hcd, pdev);
+ return 0;
+}
+
+MODULE_ALIAS("pnx8550-ohci");
+
+static struct platform_driver ohci_hcd_pnx8550_driver = {
+ .driver = {
+ .name = "pnx8550-ohci",
+ },
+ .probe = ohci_hcd_pnx8550_drv_probe,
+ .remove = ohci_hcd_pnx8550_drv_remove,
+};
+
+static int __init ohci_hcd_pnx8550_init (void)
+{
+ pr_debug (DRIVER_INFO " (pnx8550)");
+ pr_debug ("block sizes: ed %d td %d\n",
+ sizeof (struct ed), sizeof (struct td));
+
+ return platform_driver_register(&ohci_hcd_pnx8550_driver);
+}
+
+static void __exit ohci_hcd_pnx8550_cleanup (void)
+{
+ platform_driver_unregister(&ohci_hcd_pnx8550_driver);
+}
+
+module_init (ohci_hcd_pnx8550_init);
+module_exit (ohci_hcd_pnx8550_cleanup);
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
* (C) Copyright 2003-2005 MontaVista Software Inc.
- *
+ *
* Bus Glue for PPC On-Chip OHCI driver
* Tested on Freescale MPC5200 and IBM STB04xxx
*
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
- usb_put_hcd(hcd);
+ usb_put_hcd(hcd);
return retval;
}
*/
.start = ohci_ppc_soc_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_ppc_soc_driver = {
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
switch ( mode ) {
case PMM_NPS_MODE:
UHCRHDA |= RH_A_NPS;
- break;
+ break;
case PMM_GLOBAL_MODE:
UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
break;
break;
default:
printk( KERN_ERR
- "Invalid mode %d, set to non-power switch mode.\n",
+ "Invalid mode %d, set to non-power switch mode.\n",
mode );
UHCRHDA |= RH_A_NPS;
*/
.start = ohci_pxa27x_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
- .suspend = ohci_hcd_pxa27x_drv_suspend,
+ .suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
#endif
.driver = {
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
/*-------------------------------------------------------------------------*
* ED handling functions
- *-------------------------------------------------------------------------*/
+ *-------------------------------------------------------------------------*/
/* search for the right schedule branch to use for a periodic ed.
* does some load balancing; returns the branch, or negative errno.
*/
for (i = 0; i < interval ; i++) {
if (branch < 0 || ohci->load [branch] > ohci->load [i]) {
-#if 1 /* CONFIG_USB_BANDWIDTH */
int j;
/* usb 1.1 says 90% of one frame */
}
if (j < NUM_INTS)
continue;
-#endif
- branch = i;
+ branch = i;
}
}
return branch;
/* link an ed into one of the HC chains */
static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
int branch;
if (ohci_to_hcd(ohci)->state == HC_STATE_QUIESCING)
}
ed->branch = branch;
periodic_link (ohci, ed);
- }
+ }
/* the HC may not see the schedule updates yet, but if it does
* then they'll be properly ordered.
*prev = ed->ed_next;
}
ohci->load [i] -= ed->load;
- }
+ }
ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval;
ohci_vdbg (ohci, "unlink %sed %p branch %d [%dus.], interval %d\n",
ed, ed->branch, ed->load, ed->interval);
}
-/* unlink an ed from one of the HC chains.
+/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed
* When finish_unlinks() runs later, after SOF interrupt, it will often
* complete one or more URB unlinks before making that state change.
*/
-static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
+static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
unsigned int pipe,
int interval
) {
- struct ed *ed;
+ struct ed *ed;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
goto done;
}
- /* dummy td; end of td list for ed */
+ /* dummy td; end of td list for ed */
td = td_alloc (ohci, GFP_ATOMIC);
- if (!td) {
+ if (!td) {
/* out of memory */
ed_free (ohci, ed);
ed = NULL;
done:
spin_unlock_irqrestore (&ohci->lock, flags);
- return ed;
+ return ed;
}
/*-------------------------------------------------------------------------*/
* and that ed->state is ED_OPER
*/
static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE);
ed_deschedule (ohci, ed);
td->ed = urb_priv->ed;
td->next_dl_td = NULL;
td->index = index;
- td->urb = urb;
+ td->urb = urb;
td->data_dma = data;
if (!len)
data = 0;
(data & 0x0FFF) | 0xE000);
td->ed->last_iso = info & 0xffff;
} else {
- td->hwCBP = cpu_to_hc32 (ohci, data);
- }
+ td->hwCBP = cpu_to_hc32 (ohci, data);
+ }
if (data)
td->hwBE = cpu_to_hc32 (ohci, data + len - 1);
else
* use the device toggle bits for resetting, and rely on the fact
* that resetting toggle is meaningless if the endpoint is active.
*/
- if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
+ if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe),
is_out, 1);
urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
- if (tdINFO & TD_ISO) {
- u16 tdPSW = ohci_hwPSW (ohci, td, 0);
+ if (tdINFO & TD_ISO) {
+ u16 tdPSW = ohci_hwPSW (ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
* only the first of 0..MAXPSW psws is used.
*/
- cc = (tdPSW >> 12) & 0xF;
- if (tdINFO & TD_CC) /* hc didn't touch? */
+ cc = (tdPSW >> 12) & 0xF;
+ if (tdINFO & TD_CC) /* hc didn't touch? */
return;
if (usb_pipeout (urb->pipe))
int type = usb_pipetype (urb->pipe);
u32 tdBE = hc32_to_cpup (ohci, &td->hwBE);
- cc = TD_CC_GET (tdINFO);
+ cc = TD_CC_GET (tdINFO);
/* update packet status if needed (short is normally ok) */
if (cc == TD_DATAUNDERRUN
urb, td, 1 + td->index, cc,
urb->actual_length,
urb->transfer_buffer_length);
- }
+ }
}
/*-------------------------------------------------------------------------*/
static inline struct td *
ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
{
- struct urb *urb = td->urb;
+ struct urb *urb = td->urb;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
*/
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
- ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
+ ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
/* put any later tds from this urb onto the donelist, after 'td',
* order won't matter here: no errors, and nothing was transferred.
info &= ~cpu_to_hc32 (ohci, TD_CC);
next->hwINFO = info;
- next->next_dl_td = rev;
+ next->next_dl_td = rev;
rev = next;
ed->hwHeadP = next->hwNextTD | toggle;
/* get TD from hc's singly linked list, and
* prepend to ours. ed->td_list changes later.
*/
- while (td_dma) {
- int cc;
+ while (td_dma) {
+ int cc;
td = dma_to_td (ohci, td_dma);
if (!td) {
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
td_rev = ed_halted (ohci, td, cc, td_rev);
- td->next_dl_td = td_rev;
+ td->next_dl_td = td_rev;
td_rev = td;
td_dma = hc32_to_cpup (ohci, &td->hwNextTD);
- }
+ }
return td_rev;
}
if (modified)
goto rescan_all;
- }
+ }
- /* maybe reenable control and bulk lists */
+ /* maybe reenable control and bulk lists */
if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
&& ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
&& !ohci->ed_rm_list) {
&ohci->regs->ed_bulkcurrent);
}
}
-
+
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, ohci->hc_control,
- &ohci->regs->control);
- }
+ ohci_writel (ohci, ohci->hc_control,
+ &ohci->regs->control);
+ }
if (command) {
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, command, &ohci->regs->cmdstatus);
- }
+ ohci_writel (ohci, command, &ohci->regs->cmdstatus);
+ }
}
}
{
struct td *td = dl_reverse_done_list (ohci);
- while (td) {
+ while (td) {
struct td *td_next = td->next_dl_td;
struct urb *urb = td->urb;
urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
/* update URB's length and status from TD */
- td_done (ohci, urb, td);
- urb_priv->td_cnt++;
+ td_done (ohci, urb, td);
+ urb_priv->td_cnt++;
/* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_cnt == urb_priv->length)
- finish_urb (ohci, urb);
+ if (urb_priv->td_cnt == urb_priv->length)
+ finish_urb (ohci, urb);
/* clean schedule: unlink EDs that are no longer busy */
if (list_empty (&ed->td_list)) {
start_ed_unlink (ohci, ed);
/* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE))
+ } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
+ ED_SKIP | ED_DEQUEUE))
== cpu_to_hc32 (ohci, ED_SKIP)) {
td = list_entry (ed->td_list.next, struct td, td_list);
- if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
+ if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
/* ... hc may need waking-up */
switch (ed->type) {
case PIPE_CONTROL:
ohci_writel (ohci, OHCI_CLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
case PIPE_BULK:
ohci_writel (ohci, OHCI_BLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
}
}
}
- td = td_next;
- }
+ td = td_next;
+ }
}
*/
.start = ohci_s3c2410_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_s3c2410_drv_suspend, */
/*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
- *
+ *
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
*
* This file is licenced under the GPL.
*/
-
+
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/assabet.h>
{
unsigned int usb_rst = 0;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": starting SA-1111 OHCI USB Controller\n");
#ifdef CONFIG_SA1100_BADGE4
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": stopping SA-1111 OHCI USB Controller\n");
/*
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
*/
typedef __u32 __bitwise __hc32;
typedef __u16 __bitwise __hc16;
-
+
/*
* OHCI Endpoint Descriptor (ED) ... holds TD queue
* See OHCI spec, section 4.2
*/
struct ed {
/* first fields are hardware-specified */
- __hc32 hwINFO; /* endpoint config bitmap */
+ __hc32 hwINFO; /* endpoint config bitmap */
/* info bits defined by hcd */
#define ED_DEQUEUE (1 << 27)
/* info bits defined by the hardware */
* usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
*/
u8 state; /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE 0x00 /* NOT linked to HC */
-#define ED_UNLINK 0x01 /* being unlinked from hc */
+#define ED_IDLE 0x00 /* NOT linked to HC */
+#define ED_UNLINK 0x01 /* being unlinked from hc */
#define ED_OPER 0x02 /* IS linked to hc */
- u8 type; /* PIPE_{BULK,...} */
+ u8 type; /* PIPE_{BULK,...} */
/* periodic scheduling params (for intr and iso) */
u8 branch;
#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
-
+
/*
* OHCI Transfer Descriptor (TD) ... one per transfer segment
* See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
/* (no hwINFO #defines yet for iso tds) */
- __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
- __hc32 hwNextTD; /* Next TD Pointer */
- __hc32 hwBE; /* Memory Buffer End Pointer */
+ __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
+ __hc32 hwNextTD; /* Next TD Pointer */
+ __hc32 hwBE; /* Memory Buffer End Pointer */
/* PSW is only for ISO. Only 1 PSW entry is used, but on
* big-endian PPC hardware that's the second entry.
*/
#define MAXPSW 2
- __hc16 hwPSW [MAXPSW];
+ __hc16 hwPSW [MAXPSW];
/* rest are purely for the driver's use */
- __u8 index;
- struct ed *ed;
- struct td *td_hash; /* dma-->td hashtable */
- struct td *next_dl_td;
- struct urb *urb;
+ __u8 index;
+ struct ed *ed;
+ struct td *td_hash; /* dma-->td hashtable */
+ struct td *next_dl_td;
+ struct urb *urb;
dma_addr_t td_dma; /* addr of this TD */
dma_addr_t data_dma; /* addr of data it points to */
#define TD_NOTACCESSED 0x0F
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
/* No Error */ 0,
/* CRC Error */ -EILSEQ,
/* Bit Stuff */ -EPROTO,
/* BufferOver */ -ECOMM,
/* BuffUnder */ -ENOSR,
/* (for HCD) */ -EALREADY,
- /* (for HCD) */ -EALREADY
+ /* (for HCD) */ -EALREADY
};
#define NUM_INTS 32
__hc32 int_table [NUM_INTS]; /* periodic schedule */
- /*
+ /*
* OHCI defines u16 frame_no, followed by u16 zero pad.
* Since some processors can't do 16 bit bus accesses,
* portable access must be a 32 bits wide.
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
/* OHCI ROOT HUB REGISTER MASKS */
-
+
/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
#define RH_HS_LPS 0x00000001 /* local power status */
} urb_priv_t;
#define TD_HASH_SIZE 64 /* power'o'two */
-// sizeof (struct td) ~= 64 == 2^6 ...
+// sizeof (struct td) ~= 64 == 2^6 ...
#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
struct ed *ed_bulktail; /* last in bulk list */
struct ed *ed_controltail; /* last in ctrl list */
- struct ed *periodic [NUM_INTS]; /* shadow int_table */
+ struct ed *periodic [NUM_INTS]; /* shadow int_table */
/*
* OTG controllers and transceivers need software interaction;
- * other external transceivers should be software-transparent
+ * other external transceivers should be software-transparent
*/
struct otg_transceiver *transceiver;
*/
int num_ports;
int load [NUM_INTS];
- u32 hc_control; /* copy of hc control reg */
+ u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
unsigned autostop:1; /* rh auto stopping/stopped */
}
#define FI 0x2edf /* 12000 bits per frame (-1) */
-#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
+#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
#define FIT (1 << 31)
#define LSTHRESH 0x628 /* lowspeed bit threshold */
-static void periodic_reinit (struct ohci_hcd *ohci)
+static inline void periodic_reinit (struct ohci_hcd *ohci)
{
u32 fi = ohci->fminterval & 0x03fff;
u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
temp = ohci_readl (hc, &hc->regs->roothub.register); \
temp; })
-static u32 roothub_a (struct ohci_hcd *hc)
+static inline u32 roothub_a (struct ohci_hcd *hc)
{ return read_roothub (hc, a, 0xfc0fe000); }
static inline u32 roothub_b (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.b); }
static inline u32 roothub_status (struct ohci_hcd *hc)
{ return ohci_readl (hc, &hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci_hcd *hc, int i)
+static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/pci_ids.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
* these cannot be inlines because we need the structure offset!!
* Does anyone have a better way?????
*/
+#define ftdi_read_pcimem(pdev, member, data) usb_ftdi_elan_read_pcimem(pdev, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(pdev, member, data) usb_ftdi_elan_write_pcimem(pdev, \
+ offsetof(struct ohci_regs, member), 0, data);
#define u132_read_pcimem(u132, member, data) \
usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \
ohci_regs, member), 0, data);
#define u132_write_pcimem(u132, member, data) \
usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
ohci_regs, member), 0, data);
-#define u132_write_pcimem_byte(u132, member, data) \
- usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
- ohci_regs, member), 0x0e, data);
static inline struct u132 *udev_to_u132(struct u132_udev *udev)
{
u8 udev_number = udev->udev_number;
return "?";
}
-static int u132_usb_reset(struct u132 *u132)
-{
- int retval;
- retval = u132_read_pcimem(u132, control, &u132->hc_control);
- if (retval)
- return retval;
- u132->hc_control &= OHCI_CTRL_RWC;
- retval = u132_write_pcimem(u132, control, u132->hc_control);
- if (retval)
- return retval;
- return 0;
-}
-
static int u132_init(struct u132 *u132)
{
int retval;
u32 control;
u132_disable(u132);
- u132->next_statechange =
- jiffies; /* SMM owns the HC? not for long! */ {
- u32 control;
- retval = u132_read_pcimem(u132, control, &control);
- if (retval)
- return retval;
- if (control & OHCI_CTRL_IR) {
- u32 temp = 50;
- retval = u132_write_pcimem(u132, intrenable,
- OHCI_INTR_OC);
- if (retval)
- return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus,
- OHCI_OCR);
- if (retval)
- return retval;
- check:{
- retval = u132_read_pcimem(u132, control,
- &control);
- if (retval)
- return retval;
- }
- if (control & OHCI_CTRL_IR) {
- msleep(10);
- if (--temp == 0) {
- dev_err(&u132->platform_dev->dev, "USB "
- "HC takeover failed!(BIOS/SMM b"
- "ug) control=%08X\n", control);
- return -EBUSY;
- }
- goto check;
- }
- u132_usb_reset(u132);
- }
- }
+ u132->next_statechange = jiffies;
retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE);
if (retval)
return retval;
retry:retval = u132_read_pcimem(u132, cmdstatus, &status);
if (retval)
return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR);
+ retval = u132_write_pcimem(u132, cmdstatus, OHCI_HCR);
if (retval)
return retval;
extra:{
retval = u132_write_pcimem(u132, control, u132->hc_control);
if (retval)
return retval;
- retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF);
+ retval = u132_write_pcimem(u132, cmdstatus, OHCI_BLF);
if (retval)
return retval;
retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus);
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 1) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
+ dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p) has b"
+ "een removed %d\n", u132, hcd, u132->going);
} else if (u132->going > 0) {
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
{
struct u132 *u132 = hcd_to_u132(hcd);
if (u132->going > 2) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
+ dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p hep=%p"
+ ") has been removed %d\n", u132, hcd, hep,
+ u132->going);
} else {
struct u132_endp *endp = hep->hcpriv;
if (endp)
} else if (u132->going > 0) {
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
- dump_stack();
return -ESHUTDOWN;
} else {
int i, changed = 0, length = 1;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd) {
struct u132 *u132 = hcd_to_u132(hcd);
- dump_stack();
if (u132->going++ > 1) {
+ dev_err(&u132->platform_dev->dev, "already being remove"
+ "d\n");
return -ENODEV;
} else {
int rings = MAX_U132_RINGS;
int endps = MAX_U132_ENDPS;
+ dev_err(&u132->platform_dev->dev, "removing device u132"
+ ".%d\n", u132->sequence_num);
msleep(100);
down(&u132->sw_lock);
u132_monitor_cancel_work(u132);
static int __devinit u132_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
+ int retval;
+ u32 control;
+ u32 rh_a = -1;
+ u32 num_ports;
msleep(100);
if (u132_exiting > 0) {
return -ENODEV;
- } /* refuse to confuse usbcore */
+ }
+ retval = ftdi_write_pcimem(pdev, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(pdev, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ num_ports = rh_a & RH_A_NDP; /* refuse to confuse usbcore */
if (pdev->dev.dma_mask) {
return -EINVAL;
}
Alan Stern"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc;
+module_param(ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
+
/*
* debug = 0, no debugging messages
* debug = 1, dump failed URBs except for stalls
{
int port;
+ /* If we have to ignore overcurrent events then almost by definition
+ * we can't depend on resume-detect interrupts. */
+ if (ignore_oc)
+ return 1;
+
switch (to_pci_dev(uhci_dev(uhci))->vendor) {
default:
break;
{
int retval = -ENOMEM;
- printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "%s\n",
+ ignore_oc ? ", overcurrent ignored" : "");
if (usb_disabled())
return -ENODEV;
static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
{
int port;
+ int mask = RWC_BITS;
+
+ /* Some boards (both VIA and Intel apparently) report bogus
+ * overcurrent indications, causing massive log spam unless
+ * we completely ignore them. This doesn't seem to be a problem
+ * with the chipset so much as with the way it is connected on
+ * the motherboard; if the overcurrent input is left to float
+ * then it may constantly register false positives. */
+ if (ignore_oc)
+ mask &= ~USBPORTSC_OCC;
*buf = 0;
for (port = 0; port < uhci->rh_numports; ++port) {
- if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
+ if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & mask) ||
test_bit(port, &uhci->port_c_suspend))
*buf |= (1 << (port + 1));
}
wPortChange |= USB_PORT_STAT_C_CONNECTION;
if (status & USBPORTSC_PEC)
wPortChange |= USB_PORT_STAT_C_ENABLE;
- if (status & USBPORTSC_OCC)
+ if ((status & USBPORTSC_OCC) && !ignore_oc)
wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
if (test_bit(port, &uhci->port_c_suspend)) {
{
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3);
- input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
}
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
}
- }
-
- if (data[1] & 0x10)
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+ }
else
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
- wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10);
+
+ if (data[1] & 0x10) /* only report prox-in when in area */
+ wacom_report_key(wcombo, wacom->tool[0], 1);
+ if (!(data[1] & 0x90)) /* report prox-out when physically out */
+ wacom_report_key(wcombo, wacom->tool[0], 0);
wacom_input_sync(wcombo);
/* send pad data */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return 0;
- if (wacom->features->type >= INTUOS3) {
+ if (wacom->features->type >= INTUOS3S) {
wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
if (data[1] & 0x02) {
/* Rotation packet */
- if (wacom->features->type >= INTUOS3) {
+ if (wacom->features->type >= INTUOS3S) {
/* I3 marker pen rotation reported as wheel
* due to valuator limitation
*/
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 },
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
- { "Wacom Volito", 8, 5104, 3712, 511, 0, GRAPHIRE },
- { "Wacom PenStation2", 8, 3250, 2320, 255, 0, GRAPHIRE },
- { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 0, GRAPHIRE },
- { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 0, GRAPHIRE },
- { "Wacom PenPartner2", 8, 3250, 2320, 255, 0, GRAPHIRE },
+ { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
+ { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
+ { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
+ { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE },
+ { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS },
{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L },
{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 },
- { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 15, INTUOS3S },
+ { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ }
}
/* we have access to the device. Now lets allocate memory */
- ccp = (pauerchar_t) kmalloc(sizeof(auerchar_t), GFP_KERNEL);
+ ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
if (ccp == NULL) {
err ("out of memory");
ret = -ENOMEM;
}
/* Initialize device descriptor */
- memset( ccp, 0, sizeof(auerchar_t));
init_MUTEX( &ccp->mutex);
init_MUTEX( &ccp->readmutex);
auerbuf_init (&ccp->bufctl);
return -ENODEV;
/* allocate memory for our device and initialize it */
- cp = kmalloc (sizeof(auerswald_t), GFP_KERNEL);
+ cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
if (cp == NULL) {
err ("out of memory");
goto pfail;
}
/* Initialize device descriptor */
- memset (cp, 0, sizeof(auerswald_t));
init_MUTEX (&cp->mutex);
cp->usbdev = usbdev;
auerchain_init (&cp->controlchain);
#include <linux/init.h>
#include <linux/list.h>
#include <linux/ioctl.h>
+#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kref.h>
MODULE_DESCRIPTION("FTDI ELAN driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+static int distrust_firmware = 1;
+module_param(distrust_firmware, bool, 0);
+MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
+ "t setup");
extern struct platform_driver u132_platform_driver;
static struct workqueue_struct *status_queue;
static struct workqueue_struct *command_queue;
* end of the global variables protected by ftdi_module_lock
*/
#include "usb_u132.h"
-#define TD_DEVNOTRESP 5
+#include <asm/io.h>
+#include "../core/hcd.h"
+#include "../host/ohci.h"
/* Define these values to match your devices*/
#define USB_FTDI_ELAN_VENDOR_ID 0x0403
#define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea
} else {
dev_err(&ftdi->udev->dev, "initialized failed - trying "
"again in 10 seconds\n");
- work_delay_in_msec = 10 *1000;
+ work_delay_in_msec = 1 *1000;
}
} else if (ftdi->registered == 0) {
work_delay_in_msec = 10;
}
}
-static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+
+#define ftdi_read_pcimem(ftdi, member, data) ftdi_elan_read_pcimem(ftdi, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \
+ offsetof(struct ohci_regs, member), 0, data);
+#define OHCI_QUIRK_AMD756 0x01
+#define OHCI_QUIRK_SUPERIO 0x02
+#define OHCI_QUIRK_INITRESET 0x04
+#define OHCI_BIG_ENDIAN 0x08
+#define OHCI_QUIRK_ZFMICRO 0x10
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
+ OHCI_INTR_WDH)
+static int ftdi_elan_check_controller(struct usb_ftdi *ftdi, int quirk)
+{
+ int devices = 0;
+ int retval;
+ u32 hc_control;
+ int num_ports;
+ u32 control;
+ u32 rh_a = -1;
+ u32 status;
+ u32 fminterval;
+ u32 hc_fminterval;
+ u32 periodicstart;
+ u32 cmdstatus;
+ u32 roothub_a;
+ int mask = OHCI_INTR_INIT;
+ int sleep_time = 0;
+ int reset_timeout = 30; /* ... allow extra time */
+ int temp;
+ retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ num_ports = rh_a & RH_A_NDP;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval);
+ if (retval)
+ return retval;
+ hc_fminterval &= 0x3fff;
+ if (hc_fminterval != FI) {
+ }
+ hc_fminterval |= FSMP(hc_fminterval) << 16;
+ retval = ftdi_read_pcimem(ftdi, control, &hc_control);
+ if (retval)
+ return retval;
+ switch (hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ sleep_time = 0;
+ break;
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_USB_RESUME;
+ sleep_time = 10;
+ break;
+ default:
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_USB_RESET;
+ sleep_time = 50;
+ break;
+ }
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ msleep(sleep_time);
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ if (!(roothub_a & RH_A_NPS)) { /* power down each port */
+ for (temp = 0; temp < num_ports; temp++) {
+ retval = ftdi_write_pcimem(ftdi,
+ roothub.portstatus[temp], RH_PS_LSDA);
+ if (retval)
+ return retval;
+ }
+ }
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR);
+ if (retval)
+ return retval;
+ extra:{
+ retval = ftdi_read_pcimem(ftdi, cmdstatus, &status);
+ if (retval)
+ return retval;
+ if (0 != (status & OHCI_HCR)) {
+ if (--reset_timeout == 0) {
+ dev_err(&ftdi->udev->dev, "USB HC reset timed o"
+ "ut!\n");
+ return -ENODEV;
+ } else {
+ msleep(5);
+ goto extra;
+ }
+ }
+ }
+ if (quirk & OHCI_QUIRK_INITRESET) {
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ }
+ retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, fminterval,
+ ((fminterval & FIT) ^ FIT) | hc_fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, periodicstart,
+ ((9 *hc_fminterval) / 10) & 0x3fff);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart);
+ if (retval)
+ return retval;
+ if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) {
+ if (!(quirk & OHCI_QUIRK_INITRESET)) {
+ quirk |= OHCI_QUIRK_INITRESET;
+ goto retry;
+ } else
+ dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n",
+ fminterval, periodicstart);
+ } /* start controller operations */
+ hc_control &= OHCI_CTRL_RWC;
+ hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER;
+ retval = ftdi_write_pcimem(ftdi, control, hc_control);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, intrstatus, mask);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, intrdisable,
+ OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO |
+ OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH |
+ OHCI_INTR_SO);
+ if (retval)
+ return retval; /* handle root hub init quirks ... */
+ retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ roothub_a &= ~(RH_A_PSM | RH_A_OCPM);
+ if (quirk & OHCI_QUIRK_SUPERIO) {
+ roothub_a |= RH_A_NOCP;
+ roothub_a &= ~(RH_A_POTPGT | RH_A_NPS);
+ retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ } else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) {
+ roothub_a |= RH_A_NPS;
+ retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ }
+ retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC);
+ if (retval)
+ return retval;
+ retval = ftdi_write_pcimem(ftdi, roothub.b,
+ (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM);
+ if (retval)
+ return retval;
+ retval = ftdi_read_pcimem(ftdi, control, &control);
+ if (retval)
+ return retval;
+ mdelay((roothub_a >> 23) & 0x1fe);
+ for (temp = 0; temp < num_ports; temp++) {
+ u32 portstatus;
+ retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp],
+ &portstatus);
+ if (retval)
+ return retval;
+ if (1 & portstatus)
+ devices += 1;
+ }
+ return devices;
+}
+
+static int ftdi_elan_setup_controller(struct usb_ftdi *ftdi, int fn)
{
u32 latence_timer;
- u32 controlreg;
int UxxxStatus;
u32 pcidata;
int reg = 0;
- int foundOHCI = 0;
- u8 fn;
- int activePCIfn = 0;
- u32 pciVID = 0;
- u32 pciPID = 0;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
- if (UxxxStatus)
- return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
- if (UxxxStatus)
- return UxxxStatus;
- msleep(750);
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+ int activePCIfn = fn << 8;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+ reg = 16;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xFFFFFFFF);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xF0000000);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- msleep(250);
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+ reg = 12;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &latence_timer);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ latence_timer &= 0xFFFF00FF;
+ latence_timer |= 0x00001600;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ latence_timer);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ reg = 4;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ 0x06);
if (UxxxStatus)
return UxxxStatus;
- UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
if (UxxxStatus)
return UxxxStatus;
- msleep(1000);
- for (fn = 0; (fn < 4) && (!foundOHCI); fn++) {
- activePCIfn = fn << 8;
- ftdi->function = fn + 1;
- UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
- &pcidata);
+ for (reg = 0; reg <= 0x54; reg += 4) {
+ UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
if (UxxxStatus)
return UxxxStatus;
- pciVID = pcidata & 0xFFFF;
- pciPID = (pcidata >> 16) & 0xFFFF;
- if ((pciVID == 0x1045) && (pciPID == 0xc861)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x1033) && (pciPID == 0x0035)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x10b9) && (pciPID == 0x5237)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x11c1) && (pciPID == 0x5802)) {
- foundOHCI = 1;
- } else if ((pciVID == 0x11AB) && (pciPID == 0x1FA6)) {
- }
- }
- if (foundOHCI == 0) {
- return -ENXIO;
}
- ftdi->platform_data.vendor = pciVID;
- ftdi->platform_data.device = pciPID;
+ return 0;
+}
+
+static int ftdi_elan_close_controller(struct usb_ftdi *ftdi, int fn)
+{
+ u32 latence_timer;
+ int UxxxStatus;
+ u32 pcidata;
+ int reg = 0;
+ int activePCIfn = fn << 8;
UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
if (UxxxStatus)
return UxxxStatus;
if (UxxxStatus)
return UxxxStatus;
UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
- 0xF0000000);
+ 0x00000000);
if (UxxxStatus)
return UxxxStatus;
UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
return UxxxStatus;
reg = 4;
UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
- 0x06);
+ 0x00);
if (UxxxStatus)
return UxxxStatus;
UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
return 0;
}
+static int ftdi_elan_found_controller(struct usb_ftdi *ftdi, int fn, int quirk)
+{
+ int result;
+ int UxxxStatus;
+ UxxxStatus = ftdi_elan_setup_controller(ftdi, fn);
+ if (UxxxStatus)
+ return UxxxStatus;
+ result = ftdi_elan_check_controller(ftdi, quirk);
+ UxxxStatus = ftdi_elan_close_controller(ftdi, fn);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return result;
+}
+
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+{
+ u32 controlreg;
+ u8 sensebits;
+ int UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(750);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(250);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(1000);
+ sensebits = (controlreg >> 16) & 0x000F;
+ if (0x0D == sensebits)
+ return 0;
+ else
+ return - ENXIO;
+}
+
static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi)
{
+ int UxxxStatus;
u32 pcidata;
- int U132Status;
- int reg;
- int reset_repeat = 0;
- do_reset:reg = 8;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x01);
- if (U132Status)
- return U132Status;
- reset_check:{
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- if (pcidata & 1) {
- msleep(500);
- if (reset_repeat++ > 100) {
- reset_repeat = 0;
- goto do_reset;
- } else
- goto reset_check;
+ int reg = 0;
+ u8 fn;
+ int activePCIfn = 0;
+ int max_devices = 0;
+ int controllers = 0;
+ int unrecognized = 0;
+ ftdi->function = 0;
+ for (fn = 0; (fn < 4); fn++) {
+ u32 pciVID = 0;
+ u32 pciPID = 0;
+ int devices = 0;
+ activePCIfn = fn << 8;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ pciVID = pcidata & 0xFFFF;
+ pciPID = (pcidata >> 16) & 0xFFFF;
+ if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035))
+ {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802))
+ {
+ devices = ftdi_elan_found_controller(ftdi, fn, 0);
+ controllers += 1;
+ } else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) {
+ devices = ftdi_elan_found_controller(ftdi, fn,
+ OHCI_QUIRK_AMD756);
+ controllers += 1;
+ } else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) {
+ devices = ftdi_elan_found_controller(ftdi, fn,
+ OHCI_QUIRK_ZFMICRO);
+ controllers += 1;
+ } else if (0 == pcidata) {
+ } else
+ unrecognized += 1;
+ if (devices > max_devices) {
+ max_devices = devices;
+ ftdi->function = fn + 1;
+ ftdi->platform_data.vendor = pciVID;
+ ftdi->platform_data.device = pciPID;
}
}
- goto dump_regs;
- msleep(500);
- reg = 0x28;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x11000000);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x40;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x34;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf2edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 4;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0xA0);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(250);
- reg = 8;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x04);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x28;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 8;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x48;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x00001200);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x34;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x28002edf);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(100);
- reg = 0x50;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10000);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- power_check:U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- if (!(pcidata & 1)) {
- msleep(500);
- goto power_check;
- }
- msleep(3000);
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x54;
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10);
- if (U132Status)
- return U132Status;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- msleep(750);
- reg = 0x54;
- if (0) {
- U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
- if (U132Status)
- return U132Status;
- }
- if (0) {
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- }
- reg = 0x54;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- reg = 0x58;
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
- dump_regs:for (reg = 0; reg <= 0x54; reg += 4) {
- U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
- if (U132Status)
- return U132Status;
+ if (ftdi->function > 0) {
+ UxxxStatus = ftdi_elan_setup_controller(ftdi,
+ ftdi->function - 1);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return 0;
+ } else if (controllers > 0) {
+ return -ENXIO;
+ } else if (unrecognized > 0) {
+ return -ENXIO;
+ } else {
+ ftdi->enumerated = 0;
+ return -ENXIO;
}
- return 0;
}
platform_device_unregister(&ftdi->platform_dev);
ftdi->synchronized = 0;
ftdi->enumerated = 0;
+ ftdi->initialized = 0;
ftdi->registered = 0;
}
flush_workqueue(status_queue);
dev->dev = NULL;
goto out;
}
+ dev_set_drvdata(dev->dev, dev);
servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
struct trancevibrator *dev;
dev = usb_get_intfdata (interface);
- usb_set_intfdata(interface, NULL);
device_remove_file(&interface->dev, &dev_attr_speed);
+ usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
}
struct gl_packet packets;
};
-#ifdef GENELINK_ACK
-
-// FIXME: this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly; it should use the generic
-// status IRQ code (which didn't exist back in 2001).
-
-struct gl_priv {
- struct urb *irq_urb;
- char irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write(struct usbnet *dev, u8 request, u16 value)
-{
- int retval;
-
- retval = usb_control_msg(dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- value,
- 0, // index
- 0, // data buffer
- 0, // size
- USB_CTRL_SET_TIMEOUT);
- return retval;
-}
-
-static void gl_interrupt_complete(struct urb *urb)
-{
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- }
-
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status)
- err("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-static int gl_interrupt_read(struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
- int retval;
-
- // issue usb interrupt read
- if (priv && priv->irq_urb) {
- // submit urb
- if ((retval = usb_submit_urb(priv->irq_urb, GFP_KERNEL)) != 0)
- dbg("gl_interrupt_read: submit fail - %X...", retval);
- else
- dbg("gl_interrupt_read: submit success...");
- }
-
- return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect(struct usbnet *dev)
-{
- int retval;
-
- dbg("genelink_check_connect...");
-
- // detect whether another side is connected
- if ((retval = gl_control_write(dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
- dbg("%s: genelink_check_connect write fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- // usb interrupt read to ack another side
- if ((retval = gl_interrupt_read(dev)) != 0) {
- dbg("%s: genelink_check_connect read fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- dbg("%s: genelink_check_connect read success", dev->net->name);
- return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init(struct usbnet *dev)
-{
- struct gl_priv *priv;
-
- // allocate the private data structure
- if ((priv = kmalloc(sizeof *priv, GFP_KERNEL)) == 0) {
- dbg("%s: cannot allocate private data per device",
- dev->net->name);
- return -ENOMEM;
- }
-
- // allocate irq urb
- if ((priv->irq_urb = usb_alloc_urb(0, GFP_KERNEL)) == 0) {
- dbg("%s: cannot allocate private irq urb per device",
- dev->net->name);
- kfree(priv);
- return -ENOMEM;
- }
-
- // fill irq urb
- usb_fill_int_urb(priv->irq_urb, dev->udev,
- usb_rcvintpipe(dev->udev, GENELINK_INTERRUPT_PIPE),
- priv->irq_buf, INTERRUPT_BUFSIZE,
- gl_interrupt_complete, 0,
- GENELINK_INTERRUPT_INTERVAL);
-
- // set private data pointer
- dev->priv_data = priv;
-
- return 0;
-}
-
-// release the private data
-static int genelink_free(struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
-
- if (!priv)
- return 0;
-
-// FIXME: can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
- // cancel irq urb first
- usb_kill_urb(priv->irq_urb);
-
- // free irq urb
- usb_free_urb(priv->irq_urb);
-
- // free the private data structure
- kfree(priv);
-
- return 0;
-}
-
-#endif
-
static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
struct gl_header *header;
#define RX_URB_FAIL 3
/* Define these values to match your device */
-#define VENDOR_ID_REALTEK 0x0bda
+#define VENDOR_ID_REALTEK 0x0bda
#define VENDOR_ID_MELCO 0x0411
-#define VENDOR_ID_MICRONET 0x3980
+#define VENDOR_ID_MICRONET 0x3980
#define VENDOR_ID_LONGSHINE 0x07b8
+#define VENDOR_ID_OQO 0x1557
#define VENDOR_ID_ZYXEL 0x0586
#define PRODUCT_ID_RTL8150 0x8150
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+ {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
{}
};
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x1410, 0x1130) }, /* Novatel Wireless S720 CDMA/EV-DO */
+ { USB_DEVICE(0x1410, 0x2110) }, /* Novatel Wireless U720 CDMA/EV-DO */
{ USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
{ USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
+ { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
};
cypress_set_termios(port, &priv->tmp_termios);
return (0);
break;
- /* these are called when setting baud rate from gpsd */
- case TCGETS:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
- return -EFAULT;
- }
- return (0);
- break;
- case TCSETS:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
- return -EFAULT;
- }
- /* here we need to call cypress_set_termios to invoke the new settings */
- cypress_set_termios(port, &priv->tmp_termios);
- return (0);
- break;
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
while (priv != NULL) {
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID 0xF9D0
-#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSICDU20_0_PID 0xF9D0
+#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSMACHX_2_PID 0xF9D2
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <asm/uaccess.h>
+
+static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1404, 0xcddc) },
};
MODULE_DEVICE_TABLE(usb, id_table);
+static int funsoft_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct termios t;
+
+ dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
+
+ if (cmd == TCSETSF) {
+ if (user_termios_to_kernel_termios(&t, (void __user *)arg))
+ return -EFAULT;
+
+ dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
+ t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag);
+
+ if (!(t.c_lflag & ICANON))
+ return -EINVAL;
+ }
+ return -ENOIOCTLCMD;
+}
+
static struct usb_driver funsoft_driver = {
.name = "funsoft",
.probe = usb_serial_probe,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
+ .ioctl = funsoft_ioctl,
};
static int __init funsoft_init(void)
module_init(funsoft_init);
module_exit(funsoft_exit);
MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
static void klsi_105_read_bulk_callback (struct urb *urb);
static void klsi_105_set_termios (struct usb_serial_port *port,
struct ktermios *old);
-static int klsi_105_ioctl (struct usb_serial_port *port,
- struct file * file,
- unsigned int cmd,
- unsigned long arg);
static void klsi_105_throttle (struct usb_serial_port *port);
static void klsi_105_unthrottle (struct usb_serial_port *port);
/*
.chars_in_buffer = klsi_105_chars_in_buffer,
.write_room = klsi_105_write_room,
.read_bulk_callback =klsi_105_read_bulk_callback,
- .ioctl = klsi_105_ioctl,
.set_termios = klsi_105_set_termios,
/*.break_ctl = klsi_105_break_ctl,*/
.tiocmget = klsi_105_tiocmget,
*/
return retval;
}
-
-static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct klsi_105_private *priv = usb_get_serial_port_data(port);
- void __user *user_arg = (void __user *)arg;
-
- dbg("%scmd=0x%x", __FUNCTION__, cmd);
-
- /* Based on code from acm.c and others */
- switch (cmd) {
- case TIOCMIWAIT:
- /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
- /* TODO */
- dbg("%s - TIOCMIWAIT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TIOCGICOUNT:
- /* return count of modemline transitions */
- /* TODO */
- dbg("%s - TIOCGICOUNT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TCGETS:
- /* return current info to caller */
- dbg("%s - TCGETS data faked/incomplete", __FUNCTION__);
-
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (kernel_termios_to_user_termios((struct termios __user *)arg,
- &priv->termios))
- return -EFAULT;
- return 0;
- case TCSETS:
- /* set port termios to the one given by the user */
- dbg("%s - TCSETS not handled", __FUNCTION__);
-
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (user_termios_to_kernel_termios(&priv->termios,
- (struct termios __user *)arg))
- return -EFAULT;
- klsi_105_set_termios(port, &priv->termios);
- return 0;
- case TCSETSW: {
- /* set port termios and try to wait for completion of last
- * write operation */
- /* We guess here. If there are not too many write urbs
- * outstanding, we lie. */
- /* what is the right way to wait here? schedule() ? */
- /*
- while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE)
- schedule();
- */
- return -ENOIOCTLCMD;
- }
- default:
- dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
- return(-ENOIOCTLCMD);
- break;
- }
- return 0;
-} /* klsi_105_ioctl */
static void klsi_105_throttle (struct usb_serial_port *port)
{
tty_ldisc_deref(ld);
return 0;
- case TCGETS:
- if (kernel_termios_to_user_termios
- ((struct termios __user *)argp, tty->termios))
- return -EFAULT;
- return 0;
-
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
return mos7840_get_lsr_info(mos7840_port, argp);
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
+#define HUAWEI_PRODUCT_E220 0x1003
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+/* Reported by <honkkis@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
+ "Nokia",
+ "E70",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Jon Hart <Jon.Hart@web.de> */
UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
"Nokia",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* This prevents the kernel from detecting the virtual cd-drive with the
+ * Windows drivers. <johann.wilhelm@student.tugraz.at>
+*/
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0xffff,
+ "HUAWEI",
+ "E220 USB-UMTS Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
OSDN Git Service
